aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-18net: hns: Fixes the missing put_device in positive leg for roce resetSalil Mehta1-0/+3
This patch fixes the missing device reference release-after-use in the positive leg of the roce reset API of the HNS DSAF. Fixes: c969c6e7ab8c ("net: hns: Fix object reference leaks in hns_dsaf_roce_reset()") Reported-by: John Garry <john.garry@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: hns: Fix object reference leaks in hns_dsaf_roce_reset()Huang Zijiang1-0/+2
The of_find_device_by_node() takes a reference to the underlying device structure, we should release that reference. Signed-off-by: Huang Zijiang <huang.zijiang@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Fix wrong read accesses via Clause 45 MDIO protocolYonglong Liu1-1/+1
When reading phy registers via Clause 45 MDIO protocol, after write address operation, the driver use another write address operation, so can not read the right value of any phy registers. This patch fixes it. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Restart autoneg need return failed when autoneg offYonglong Liu1-7/+9
The hns driver of earlier devices, when autoneg off, restart autoneg will return -EINVAL, so make the hns driver for the latest devices do the same. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-27net: hns: Fix for missing of_node_put() after of_parse_phandle()Yonglong Liu1-0/+5
In hns enet driver, we use of_parse_handle() to get hold of the device node related to "ae-handle" but we have missed to put the node reference using of_node_put() after we are done using the node. This patch fixes it. Note: This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217 Fixes: 48189d6aaf1e ("net: hns: enet specifies a reference to dsaf") Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-14/+9
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain4-11/+8
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-04net: hns: Fix use after free identified by SLUB debugYonglong Liu1-4/+2
When enable SLUB debug, than remove hns_enet_drv module, SLUB debug will identify a use after free bug: [134.189505] Unable to handle kernel paging request at virtual address 006b6b6b6b6b6b6b [134.197553] Mem abort info: [134.200381] ESR = 0x96000004 [134.203487] Exception class = DABT (current EL), IL = 32 bits [134.209497] SET = 0, FnV = 0 [134.212596] EA = 0, S1PTW = 0 [134.215777] Data abort info: [134.218701] ISV = 0, ISS = 0x00000004 [134.222596] CM = 0, WnR = 0 [134.225606] [006b6b6b6b6b6b6b] address between user and kernel address ranges [134.232851] Internal error: Oops: 96000004 [#1] SMP [134.237798] CPU: 21 PID: 27834 Comm: rmmod Kdump: loaded Tainted: G OE 4.19.5-1.2.34.aarch64 #1 [134.247856] Hardware name: Huawei TaiShan 2280 /BC11SPCD, BIOS 1.58 10/24/2018 [134.255181] pstate: 20000005 (nzCv daif -PAN -UAO) [134.260044] pc : hns_ae_put_handle+0x38/0x60 [134.264372] lr : hns_ae_put_handle+0x24/0x60 [134.268700] sp : ffff00001be93c50 [134.272054] x29: ffff00001be93c50 x28: ffff802faaec8040 [134.277442] x27: 0000000000000000 x26: 0000000000000000 [134.282830] x25: 0000000056000000 x24: 0000000000000015 [134.288284] x23: ffff0000096fe098 x22: ffff000001050070 [134.293671] x21: ffff801fb3c044a0 x20: ffff80afb75ec098 [134.303287] x19: ffff80afb75ec098 x18: 0000000000000000 [134.312945] x17: 0000000000000000 x16: 0000000000000000 [134.322517] x15: 0000000000000002 x14: 0000000000000000 [134.332030] x13: dead000000000100 x12: ffff7e02bea3c988 [134.341487] x11: ffff80affbee9e68 x10: 0000000000000000 [134.351033] x9 : 6fffff8000008101 x8 : 0000000000000000 [134.360569] x7 : dead000000000100 x6 : ffff000009579748 [134.370059] x5 : 0000000000210d00 x4 : 0000000000000000 [134.379550] x3 : 0000000000000001 x2 : 0000000000000000 [134.388813] x1 : 6b6b6b6b6b6b6b6b x0 : 0000000000000000 [134.397993] Process rmmod (pid: 27834, stack limit = 0x00000000d474b7fd) [134.408498] Call trace: [134.414611] hns_ae_put_handle+0x38/0x60 [134.422208] hnae_put_handle+0xd4/0x108 [134.429563] hns_nic_dev_remove+0x60/0xc0 [hns_enet_drv] [134.438342] platform_drv_remove+0x2c/0x70 [134.445958] device_release_driver_internal+0x174/0x208 [134.454810] driver_detach+0x70/0xd8 [134.461913] bus_remove_driver+0x64/0xe8 [134.469396] driver_unregister+0x34/0x60 [134.476822] platform_driver_unregister+0x20/0x30 [134.485130] hns_nic_dev_driver_exit+0x14/0x6e4 [hns_enet_drv] [134.494634] __arm64_sys_delete_module+0x238/0x290 struct hnae_handle is a member of struct hnae_vf_cb, so when vf_cb is freed, than use hnae_handle will cause use after free panic. This patch frees vf_cb after hnae_handle used. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-04net: hns: Fix WARNING when hns modules installedYonglong Liu1-10/+7
Commit 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.") add phy_stop in hns_nic_init_phy(), In the branch of "net", this method is effective, but in the branch of "net-next", it will cause a WARNING when hns modules loaded, reference to commit 2b3e88ea6528 ("net: phy: improve phy state checking"): [10.092168] ------------[ cut here ]------------ [10.092171] called from state READY [10.092189] WARNING: CPU: 4 PID: 1 at ../drivers/net/phy/phy.c:854 phy_stop+0x90/0xb0 [10.092192] Modules linked in: [10.092197] CPU: 4 PID:1 Comm:swapper/0 Not tainted 4.20.0-rc7-next-20181220 #1 [10.092200] Hardware name: Huawei TaiShan 2280 /D05, BIOS Hisilicon D05 UEFI 16.12 Release 05/15/2017 [10.092202] pstate: 60000005 (nZCv daif -PAN -UAO) [10.092205] pc : phy_stop+0x90/0xb0 [10.092208] lr : phy_stop+0x90/0xb0 [10.092209] sp : ffff00001159ba90 [10.092212] x29: ffff00001159ba90 x28: 0000000000000007 [10.092215] x27: ffff000011180068 x26: ffff0000110a5620 [10.092218] x25: ffff0000113b6000 x24: ffff842f96dac000 [10.092221] x23: 0000000000000000 x22: 0000000000000000 [10.092223] x21: ffff841fb8425e18 x20: ffff801fb3a56438 [10.092226] x19: ffff801fb3a56000 x18: ffffffffffffffff [10.092228] x17: 0000000000000000 x16: 0000000000000000 [10.092231] x15: ffff00001122d6c8 x14: ffff00009159b7b7 [10.092234] x13: ffff00001159b7c5 x12: ffff000011245000 [10.092236] x11: 0000000005f5e0ff x10: ffff00001159b750 [10.092239] x9 : 00000000ffffffd0 x8 : 0000000000000465 [10.092242] x7 : ffff0000112457f8 x6 : ffff0000113bd7ce [10.092245] x5 : 0000000000000000 x4 : 0000000000000000 [10.092247] x3 : 00000000ffffffff x2 : ffff000011245828 [10.092250] x1 : 4b5860bd05871300 x0 : 0000000000000000 [10.092253] Call trace: [10.092255] phy_stop+0x90/0xb0 [10.092260] hns_nic_init_phy+0xf8/0x110 [10.092262] hns_nic_try_get_ae+0x4c/0x3b0 [10.092264] hns_nic_dev_probe+0x1fc/0x480 [10.092268] platform_drv_probe+0x50/0xa0 [10.092271] really_probe+0x1f4/0x298 [10.092273] driver_probe_device+0x58/0x108 [10.092275] __driver_attach+0xdc/0xe0 [10.092278] bus_for_each_dev+0x74/0xc8 [10.092280] driver_attach+0x20/0x28 [10.092283] bus_add_driver+0x1b8/0x228 [10.092285] driver_register+0x60/0x110 [10.092288] __platform_driver_register+0x40/0x48 [10.092292] hns_nic_dev_driver_init+0x18/0x20 [10.092296] do_one_initcall+0x5c/0x180 [10.092299] kernel_init_freeable+0x198/0x240 [10.092303] kernel_init+0x10/0x108 [10.092306] ret_from_fork+0x10/0x18 [10.092308] ---[ end trace 1396dd0278e397eb ]--- This WARNING occurred because of calling phy_stop before phy_start. The root cause of the problem in commit '308c6cafde01' is: Reference to hns_nic_init_phy, the flag phydev->supported is changed after phy_connect_direct. The flag phydev->supported is 0x6ff when hns modules is loaded, so will not change Fiber Port power(Reference to marvell.c), which is power on at default. Then the flag phydev->supported is changed to 0x6f, so Fiber Port power is off when removing hns modules. When hns modules installed again, the flag phydev->supported is default value 0x6ff, so will not change Fiber Port power(now is off), causing mac link not up problem. So the solution is change phy flags before phy_connect_direct. Fixes: 308c6cafde01 ("net: hns: All ports can not work when insmod hns ko after rmmod.") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-01net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENTHuazhong Tan1-3/+4
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller6-178/+413
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: remove redundant variable initializationPeng Li1-1/+1
This patch removes the redundant variable initialization, as driver will devm_kzalloc to set value to hdev soon. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix the descriptor index when get rss typePeng Li1-1/+8
Driver gets rss information from the last descriptor of the packet. When driver handle the rss type, ring->next_to_clean indicates the first descriptor of next packet. This patch fix the descriptor index with "ring->next_to_clean - 1". Fixes: 232fc64b6e62 ("net: hns3: Add HW RSS hash information to RX skb") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: don't restore rules when flow director is disabledJian Shen1-0/+4
When user disables flow director, all the rules will be disabled. But when reset happens, it will restore all the rules again. It's not reasonable. This patch fixes it by add flow director status check before restore fules. Fixes: 6871af29b3ab ("net: hns3: Add reset handle for flow director") Fixes: c17852a8932f ("net: hns3: Add support for enable/disable flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix vf id check issue when add flow director ruleJian Shen1-7/+7
When add flow director fule for vf, the vf id is used as array subscript before valid checking, which may cause memory overflow. Fixes: dd74f815dd41 ("net: hns3: Add support for rule add/delete for flow director") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: reset tqp while doing DOWN operationHuazhong Tan2-0/+8
While doing DOWN operation, the driver will reclaim the memory which has already used for TX. If the hardware is processing this memory, it will cause a RCB error to the hardware. According the hardware's description, the driver should reset the tqp before reclaim the memory during DOWN. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: add max vector number check for pfJian Shen1-0/+4
Each pf supports max 64 vectors and 128 tqps. For 2p/4p core scenario, there may be more than 64 cpus online. So the result of min_t(u16, num_Online_cpus(), tqp_num) may be more than 64. This patch adds check for the vector number. Fixes: dd38c72604dc ("net: hns3: fix for coalesce configuration lost during reset") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: fix a bug caused by udelayPeng Li1-2/+2
udelay() in driver may always occupancy processor. If there is only one cpu in system, the VF driver may initialize fail when insmod PF and VF driver in the same system. This patch use msleep() to free cpu when VF wait PF message. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: change default tc state to closeJian Shen1-1/+1
In original codes, default tc value is set to the max tc. It's more reasonable to close tc by changing default tc value to 1. Users can enable it with lldp tool when they want to use tc. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net: hns3: refine the handle for hns3_nic_net_open/stop()Jian Shen4-11/+38
When triggering nic down, there is a time window between bringing down the protocol stack and stopping the work task. If the net is up in the time window, it may bring up the protocol stack again. This patch fixes it by stop the work task at the beginning of hns3_nic_net_stop(). To keep symmetrical, start the work task at the end of hns3_nic_net_open(). Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: fix a SSU buffer checking bugYunsheng Lin1-2/+3
When caculating the SSU buffer, it first allocate tx and rx private buffer, then the remaining buffer is for rx shared buffer. The remaining buffer size should be at least bigger than or equal to the shared_std, which is the minimum shared buffer size required by the driver, but currently if the remaining buffer size is equal to the shared_std, it returns failure, which causes SSU buffer allocation failure problem. This patch fixes this problem by rounding up shared_std before checking the the remaining buffer size bigger than or equal to the shared_std. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: aligning buffer size in SSU to 256 bytesYunsheng Lin1-17/+26
The hardware expects the buffer size set to SSU is aligned to 256 bytes, this patch aligns the buffer size to 256 byte using roundup or rounddown function. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: getting tx and dv buffer size through firmwareYunsheng Lin3-11/+38
This patch adds support of getting tx and dv buffer size through firmware, because different version of hardware requires different size of tx and dv buffer. This patch also add dv_buf_size to tc' private buffer size even if pfc is not enable for the tc. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: synchronize speed and duplex from phy when phy link upPeng Li1-0/+4
Driver calls phy_connect_direct and registers hclge_mac_adjust_link to synchronize mac speed and duplex from phy. It is better to synchronize mac speed and duplex from phy when phy link up. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: remove 1000M/half support of phyFuyun Liang1-1/+1
Our phy does not support 1000M/half, this patch removes 1000M/half from PHY_SUPPORTED_FEATURES. Signed-off-by: Fuyun Liang <liangfuyun1@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: update coalesce param per secondPeng Li2-9/+3
coalesce param updates every 100 napi times, it may update a little late if ping test after a high rate flow, may over napi poll is called 100 times as ping test sends packets every second. This patch updates coalesce param every second, instead with every 100 napi times. It can not update the param 100% in time, but the lag time is very short. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: fix incomplete uninitialization of IRQ in the hns3_nic_uninit_vector_data()Huazhong Tan1-6/+6
In the hns3_nic_uninit_vector_data(), the procedure of uninitializing the tqp_vector's IRQ has not set affinity_notify to NULL and changes its init flag. This patch fixes it. And for simplificaton, local variable tqp_vector is used instead of priv->tqp_vector[i]. Fixes: 424eb834a9be ("net: hns3: Unified HNS3 {VF|PF} Ethernet Driver for hip08 SoC") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: remove unnecessary configuration recapture while resettingHuazhong Tan1-13/+0
When doing reset, it is unnecessary to get the hardware's default configuration again, otherwise, the user's configuration will be overwritten. Fixes: 4ed340ab8f49 ("net: hns3: Add reset process in hclge_main") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: update some variables while hclge_reset()/hclgevf_reset() doneHuazhong Tan2-1/+7
When hclge_reset() completes successfully, it should update the last_reset_time, set reset_fail_cnt to 0, and set reset_type of hnae3_ae_dev to HNAE3_NONE_RESET. Also when hclgevf_reset() completes successfully, it should update the last_reset_time, and set reset_type of hnae3_ae_dev to HNAE3_NONE_RESET. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: fix napi_disable not return problemHuazhong Tan1-2/+2
While doing DOWN, the calling of napi_disable() may not return, since the napi_complete() in the hns3_nic_common_poll() will never be called when HNS3_NIC_STATE_DOWN is set. So we need to call napi_complete() before checking HNS3_NIC_STETE_DOWN. Fixes: ff0699e04b97 ("net: hns3: stop napi polling when HNS3_NIC_STATE_DOWN is set") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: uninitialize pci in the hclgevf_uninitHuazhong Tan1-1/+1
In the hclgevf_pci_reset(), it only uninitialize and initialize the msi, so if the initialization fails, hclgevf_uninit_hdev() does not need to uninitialize the msi, but needs to uninitialize the pci, otherwise it will cause pci resource not free. Fixes: 862d969a3a4d ("net: hns3: do VF's pci re-initialization while PF doing FLR") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: hns3: fix error handling int the hns3_get_vector_ring_chainHuazhong Tan1-2/+3
When hns3_get_vector_ring_chain() failed in the hns3_nic_init_vector_data(), it should do the error handling instead of return directly. Also, cur_chain should be freed instead of chain and head->next should be set to NULL in error handling of hns3_get_vector_ring_chain. This patch fixes them. Fixes: 73b907a083b8 ("net: hns3: bugfix for buffer not free problem during resetting") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fix ping failed when use net bridge and send multicastYonglong Liu1-41/+216
Create a net bridge, add eth and vnet to the bridge. The vnet is used by a virtual machine. When ping the virtual machine from the outside host and the virtual machine send multicast at the same time, the ping package will lost. The multicast package send to the eth, eth will send it to the bridge too, and the bridge learn the mac of eth. When outside host ping the virtual mechine, it will match the promisc entry of the eth which is not expected, and the bridge send it to eth not to vnet, cause ping lost. So this patch change promisc tcam entry position to the END of 512 tcam entries, which indicate lower priority. And separate one promisc entry to two: mc & uc, to avoid package match the wrong tcam entry. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Add mac pcs config when enable|disable macYonglong Liu2-4/+11
In some case, when mac enable|disable and adjust link, may cause hard to link(or abnormal) between mac and phy. This patch adds the code for rx PCS to avoid this bug. Disable the rx PCS when driver disable the gmac, and enable the rx PCS when driver enable the mac. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fix ntuple-filters status error.Yonglong Liu1-1/+1
The ntuple-filters features is forced on by chip. But it shows "ntuple-filters: off [fixed]" when use ethtool. This patch make it correct with "ntuple-filters: on [fixed]". Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Avoid net reset caused by pause frames stormYonglong Liu1-2/+10
There will be a large number of MAC pause frames on the net, which caused tx timeout of net device. And then the net device was reset to try to recover it. So that is not useful, and will cause some other problems. So need doubled ndev->watchdog_timeo if device watchdog occurred until watchdog_timeo up to 40s and then try resetting to recover it. When collecting dfx information such as hardware registers when tx timeout. Some registers for count were cleared when read. So need move this task before update net state which also read the count registers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Free irq when exit from abnormal branchYonglong Liu1-1/+22
1.In "hns_nic_init_irq", if request irq fail at index i, the function return directly without releasing irq resources that already requested. 2.In "hns_nic_net_up" after "hns_nic_init_irq", if exceptional branch occurs, irqs that already requested are not release. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Clean rx fbd when ae stopped.Yonglong Liu1-0/+3
If there are packets in hardware when changing the speed or duplex, it may cause hardware hang up. This patch adds the code to wait rx fbd clean up when ae stopped. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Fixed bug that netdev was opened twiceYonglong Liu1-0/+3
After resetting dsaf to try to repair chip error such as ecc error, the net device will be open if net interface is up. But at this time if there is the users set the net device up with the command ifconfig, the net device will be opened twice consecutively. Function napi_enable was called when open device. And Kernel panic will be occurred if it was called twice consecutively. Such as follow: static inline void napi_enable(struct napi_struct *n) { BUG_ON(!test_bit(NAPI_STATE_SCHED, &n->state)); smp_mb__before_clear_bit(); clear_bit(NAPI_STATE_SCHED, &n->state); } [37255.571996] Kernel panic - not syncing: BUG! [37255.595234] Call trace: [37255.597694] [<ffff80000008ab48>] dump_backtrace+0x0/0x1a0 [37255.603114] [<ffff80000008ad08>] show_stack+0x20/0x28 [37255.608187] [<ffff8000009c4944>] dump_stack+0x98/0xb8 [37255.613258] [<ffff8000009c149c>] panic+0x10c/0x26c [37255.618070] [<ffff80000070f134>] hns_nic_net_up+0x30c/0x4e0 [37255.623664] [<ffff80000070f39c>] hns_nic_net_open+0x94/0x12c [37255.629346] [<ffff80000084be78>] __dev_open+0xf4/0x168 [37255.634504] [<ffff80000084c1ac>] __dev_change_flags+0x98/0x15c [37255.640359] [<ffff80000084c29c>] dev_change_flags+0x2c/0x68 [37255.769580] [<ffff8000008dc400>] devinet_ioctl+0x650/0x704 [37255.775086] [<ffff8000008ddc38>] inet_ioctl+0x98/0xb4 [37255.780159] [<ffff800000827b7c>] sock_do_ioctl+0x44/0x84 [37255.785490] [<ffff800000828e04>] sock_ioctl+0x248/0x30c [37255.790737] [<ffff80000026dc6c>] do_vfs_ioctl+0x480/0x618 [37255.796156] [<ffff80000026de94>] SyS_ioctl+0x90/0xa4 [37255.801139] SMP: stopping secondary CPUs [37255.805079] kbox: catch panic event. [37255.809586] collected_len = 128928, LOG_BUF_LEN_LOCAL = 131072 [37255.816103] flush cache 0xffff80003f000000 size 0x800000 [37255.822192] flush cache 0xffff80003f000000 size 0x800000 [37255.828289] flush cache 0xffff80003f000000 size 0x800000 [37255.834378] kbox: no notify die func register. no need to notify [37255.840413] ---[ end Kernel panic - not syncing: BUG! This patchset fix this bug according to the flag NIC_STATE_DOWN. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Some registers use wrong address according to the datasheet.Yonglong Liu2-127/+127
According to the hip06 datasheet: 1.Six registers use wrong address: RCB_COM_SF_CFG_INTMASK_RING RCB_COM_SF_CFG_RING_STS RCB_COM_SF_CFG_RING RCB_COM_SF_CFG_INTMASK_BD RCB_COM_SF_CFG_BD_RINT_STS DSAF_INODE_VC1_IN_PKT_NUM_0_REG 2.The offset of DSAF_INODE_VC1_IN_PKT_NUM_0_REG should be 0x103C + 0x80 * all_chn_num 3.The offset to show the value of DSAF_INODE_IN_DATA_STP_DISC_0_REG is wrong, so the value of DSAF_INODE_SW_VLAN_TAG_DISC_0_REG will be overwrite These registers are only used in "ethtool -d", so that did not cause ndev to misfunction. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: All ports can not work when insmod hns ko after rmmod.Yonglong Liu2-0/+18
There are two test cases: 1. Remove the 4 modules:hns_enet_drv/hns_dsaf/hnae/hns_mdio, and install them again, must use "ifconfig down/ifconfig up" command pair to bring port to work. This patch calls phy_stop function when init phy to fix this bug. 2. Remove the 2 modules:hns_enet_drv/hns_dsaf, and install them again, all ports can not use anymore, because of the phy devices register failed(phy devices already exists). Phy devices are registered when hns_dsaf installed, this patch removes them when hns_dsaf removed. The two cases are sometimes related, fixing the second case also requires fixing the first case, so fix them together. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-16net: hns: Incorrect offset address used for some registers.Yonglong Liu1-2/+2
According to the hip06 Datasheet: 1. The offset of INGRESS_SW_VLAN_TAG_DISC should be 0x1A00+4*all_chn_num 2. The offset of INGRESS_IN_DATA_STP_DISC should be 0x1A50+4*all_chn_num Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "tm map" status information query functionliuzhongzhu4-0/+93
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump tm map 100 > cmd queue_id | qset_id | pri_id | tc_id 0100 | 0065 | 08 | 00 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "queue map" information query functionliuzhongzhu7-2/+76
This patch prints queue map information. debugfs command: echo dump queue map > cmd Sample Command: root@(none)# echo queue map > cmd local queue id | global queue id | vector id 0 32 769 1 33 770 2 34 771 3 35 772 4 36 773 5 37 774 6 38 775 7 39 776 8 40 777 9 41 778 10 42 779 11 43 780 12 44 781 13 45 782 14 46 783 15 47 784 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "dcb register" status information query functionliuzhongzhu4-0/+134
This patch prints dcb register status information by module. debugfs command: root@(none)# echo dump reg dcb > cmd roce_qset_mask: 0x0 nic_qs_mask: 0x0 qs_shaping_pass: 0x0 qs_bp_sts: 0x0 pri_mask: 0x0 pri_cshaping_pass: 0x0 pri_pshaping_pass: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "status register" information query functionliuzhongzhu4-0/+885
This patch prints status register information by module. debugfs command: echo dump reg [mode name] > cmd Sample Command: root@(none)# echo dump reg bios common > cmd BP_CPU_STATE: 0x0 DFX_MSIX_INFO_NIC_0: 0xc000 DFX_MSIX_INFO_NIC_1: 0xf DFX_MSIX_INFO_NIC_2: 0x2 DFX_MSIX_INFO_NIC_3: 0x2 DFX_MSIX_INFO_ROC_0: 0xc000 DFX_MSIX_INFO_ROC_1: 0x0 DFX_MSIX_INFO_ROC_2: 0x0 DFX_MSIX_INFO_ROC_3: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "manager table" information query functionliuzhongzhu4-2/+100
This patch prints manager table information. debugfs command: echo dump mng tbl > cmd Sample Command: root@(none)# echo dump mng tbl > cmd entry|mac_addr |mask|ether|mask|vlan|mask|i_map|i_dir|e_type 00 |01:00:5e:00:00:01|0 |00000|0 |0000|0 |00 |00 |0 01 |c2:f1:c5:82:68:17|0 |00000|0 |0000|0 |00 |00 |0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: hns3: Add "bd info" query functionliuzhongzhu1-1/+78
This patch prints Sending and receiving package descriptor information. debugfs command: echo dump bd info 1 > cmd Sample Command: root@(none)# echo bd info 1 > cmd hns3 0000:7d:00.0: TX Queue Num: 0, BD Index: 0 hns3 0000:7d:00.0: (TX) addr: 0x0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)send_size: 0 hns3 0000:7d:00.0: (TX)vlan_tso: 0 hns3 0000:7d:00.0: (TX)l2_len: 0 hns3 0000:7d:00.0: (TX)l3_len: 0 hns3 0000:7d:00.0: (TX)l4_len: 0 hns3 0000:7d:00.0: (TX)vlan_tag: 0 hns3 0000:7d:00.0: (TX)tv: 0 hns3 0000:7d:00.0: (TX)vlan_msec: 0 hns3 0000:7d:00.0: (TX)ol2_len: 0 hns3 0000:7d:00.0: (TX)ol3_len: 0 hns3 0000:7d:00.0: (TX)ol4_len: 0 hns3 0000:7d:00.0: (TX)paylen: 0 hns3 0000:7d:00.0: (TX)vld_ra_ri: 0 hns3 0000:7d:00.0: (TX)mss: 0 hns3 0000:7d:00.0: RX Queue Num: 0, BD Index: 120 hns3 0000:7d:00.0: (RX)addr: 0xffee7000 hns3 0000:7d:00.0: (RX)pkt_len: 0 hns3 0000:7d:00.0: (RX)size: 0 hns3 0000:7d:00.0: (RX)rss_hash: 0 hns3 0000:7d:00.0: (RX)fd_id: 0 hns3 0000:7d:00.0: (RX)vlan_tag: 0 hns3 0000:7d:00.0: (RX)o_dm_vlan_id_fb: 0 hns3 0000:7d:00.0: (RX)ot_vlan_tag: 0 hns3 0000:7d:00.0: (RX)bd_base_info: 0 Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-14hns3: prevent building without CONFIG_INETArnd Bergmann1-0/+1
We now get a link failure when CONFIG_INET is disabled, since tcp_gro_complete is unavailable: drivers/net/ethernet/hisilicon/hns3/hns3_enet.o: In function `hns3_set_gro_param': hns3_enet.c:(.text+0x230c): undefined reference to `tcp_gro_complete' Add an explicit CONFIG_INET dependency here to avoid the broken configuration. Fixes: a6d53b97a2e7 ("net: hns3: Adds GRO params to SKB for the stack") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10net: hns3: fix spelling mistake "offser" -> "offset"Colin Ian King1-1/+1
There is a spelling mistake in a msg string, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.