aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/hisilicon (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10net: hns3: fix spelling mistake "offser" -> "offset"Colin Ian King1-1/+1
There is a spelling mistake in a msg string, fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: add handling of RDMA RAS errorsShiju Jose3-1/+199
This patch handles the RDMA RAS errors. 1. Enable RAS interrupt, print error detail info and clear error status. 2. Do CORE reset to recovery when these non-fatal errors happened. Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: handle hw errors of SSUShiju Jose3-0/+203
This patch enables and handles hw errors of the Storage Switch Unit(SSU). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: handle hw errors of PPU(RCB)Shiju Jose3-0/+180
This patch enables and handles hw RAS and MSIx errors of PPU(RCB). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: handle hw errors of PPP PFShiju Jose1-2/+13
This patch handles PF hw errors of PPP(Programmable Packet Processor). Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: add handling of hw errors of MACShiju Jose3-0/+51
This patch adds enable and handling of hw errors of the MAC block. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: add handling of hw errors reported through MSIXSalil Mehta6-2/+139
This patch adds handling for HNS3 hardware errors(non-standard) which are reported through MSIX interrupts and not through PCIe AER channel. These MSIX reported hardware errors are handled using common misc. interrupt handler. Hardware error related registers cannot be cleared in context to the interrupt received as they require *heavy* access to hardware using IMP(Integrated Mangement Processor) commands. Hence, we defer the clearing of such error events till later time. Since, we have defered exact identification of errors we will have to defer the level of receovery/reset which might be required. Hence, a new reset type UNKNOWN reset has been introduced which effectively defers the assertion of the reset till we get hold of kind of errors at later time. Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: deleted logging 1 bit errorsShiju Jose1-37/+0
This patch deletes logging 1 bit errors for the following reasons. 1. AER does not notify 1 bit errors to the device drivers. However AER reports 1 bit errors to the userspace through the trace_aer_event for logging in the rasdaemon. 2. Firmware clears the status of 1 bit errors in the hw registers. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: add handling of hw ras errors using new set of commandsShiju Jose3-170/+331
1. This patch adds handling of hw ras errors using new set of common commands. 2. Updated the error message tables to match the register's name and error status returned by the commands. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: add optimization in the hclge_hw_error_set_stateShiju Jose1-9/+7
1. This patch adds minor loop optimization in the hclge_hw_error_set_state function. 2. Adds logging module's name if it fails to configure the error interrupts. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: rename process_hw_error functionShiju Jose5-6/+6
This patch renames process_hw_error function to handle_hw_ras_error function to match the purpose of the function. This is because hw errors reported through ras and msix interrupts will be handled separately. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: deletes unnecessary settings of the descriptor dataShiju Jose1-22/+5
This patch deletes unnecessary setting of the descriptor data to 0 for disabling error interrupts because it is already done by the hclge_cmd_setup_basic_desc function. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: re-enable error interrupts on hw resetShiju Jose3-7/+10
This patch adds calling hclge_hw_error_set_state function to re-enable the error interrupts those will be disabled on the hw reset. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: rename enable error interrupt functionsShiju Jose3-55/+34
This patch - renames the enable error interrupt functions. The reason is that these functions are used for both enable and disable error interrupts. - removes redundant logs from the enable error interrupt functions. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-07net: hns3: remove existing process error functions and reorder hw_blk tableShiju Jose3-475/+18
1.The command interface for queryng and clearing hw errors is changed, which requires the new process error functions to be added. This patch removes all the current process error functions and associated definitions. The new functions to handle ras errors would be added in this patch set. 2. Fixed order issue of the hw_blk table. Signed-off-by: Shiju Jose <shiju.jose@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06net: core: dev: Add extack argument to dev_open()Petr Machata2-2/+2
In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_open(). Therefore extend dev_open() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but bond and team drivers have the extack readily available. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: hns3: Adds support to dump(using ethool-d) PCIe regs in HNS3 PF driverJian Shen2-5/+171
This patch adds support to dump PF PCIe registers using ethtool -d for HNS3 PF Driver. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: hns3: Support "ethtool -d" for HNS3 VF driverJian Shen2-0/+174
This patch adds "ethtool -d" support for HNS3 VF Driver. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+1
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28net: hisilicon: remove unexpected free_netdevPan Bian1-3/+1
The net device ndev is freed via free_netdev when failing to register the device. The control flow then jumps to the error handling code block. ndev is used and freed again. Resulting in a use-after-free bug. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27net: hns3: Config NIC port speed same as that of optical modulePeng Li3-60/+49
Port 0/1 of HiP08 supports 10G and 25G. This patch adds a change to configure NIC port speed same as that of optical module(SFP/QFSP). Driver gets the optical module speed and sets NIC port speed accordingly. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos buffer" config info query functionliuzhongzhu2-0/+116
This patch prints qos buffer config information. debugfs command: echo dump qos buf cfg > cmd Sample Command: root@(none)# echo dump qos buf cfg > cmd hns3 0000:7d:00.0: dump qos buf cfg hns3 0000:7d:00.0: tx_packet_buf_tc_0: 0x1aa hns3 0000:7d:00.0: tx_packet_buf_tc_1: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_2: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_3: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_4: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_5: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_6: 0x0 hns3 0000:7d:00.0: tx_packet_buf_tc_7: 0x0 hns3 0000:7d:00.0: hns3 0000:7d:00.0: rx_packet_buf_tc_0: 0x130 hns3 0000:7d:00.0: rx_packet_buf_tc_1: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_2: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_3: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_4: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_5: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_6: 0x0 hns3 0000:7d:00.0: rx_packet_buf_tc_7: 0x0 hns3 0000:7d:00.0: rx_share_buf: 0x1e0e root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos prio map" info query functionliuzhongzhu3-0/+55
This patch prints qos priority map information. debugfs command: echo dump qos pri map > cmd Sample Command: root@(none)# echo dump qos pri map > cmd hns3 0000:7d:00.0: dump qos pri map hns3 0000:7d:00.0: vlan_to_pri: 0x0 hns3 0000:7d:00.0: pri_0_to_tc: 0x0 hns3 0000:7d:00.0: pri_1_to_tc: 0x0 hns3 0000:7d:00.0: pri_2_to_tc: 0x0 hns3 0000:7d:00.0: pri_3_to_tc: 0x0 hns3 0000:7d:00.0: pri_4_to_tc: 0x0 hns3 0000:7d:00.0: pri_5_to_tc: 0x0 hns3 0000:7d:00.0: pri_6_to_tc: 0x0 hns3 0000:7d:00.0: pri_7_to_tc: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "qos pause" config info query functionliuzhongzhu2-0/+26
This patch prints qos pause config information. debugfs command: echo dump qos pause cfg > cmd Sample Command: root@(none)# echo dump qos pause cfg > cmd hns3 0000:7d:00.0: dump qos pause cfg hns3 0000:7d:00.0: pause_trans_gap: 0xff hns3 0000:7d:00.0: pause_trans_time: 0xffff root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "tm config" info query functionliuzhongzhu2-0/+200
This patch prints Transmit Module's Traffic sched related config information. debugfs command: echo dump tm > cmd Sample output: root@(none)# echo dump tm > cmd hns3 0000:7d:00.0: dump tm hns3 0000:7d:00.0: PG_TO_PRI gp_id: 0 hns3 0000:7d:00.0: PG_TO_PRI map: 0x1 hns3 0000:7d:00.0: QS_TO_PRI qs_id: 0 hns3 0000:7d:00.0: QS_TO_PRI priority: 0 hns3 0000:7d:00.0: QS_TO_PRI link_vld: 1 hns3 0000:7d:00.0: NQ_TO_QS nq_id: 0 hns3 0000:7d:00.0: NQ_TO_QS qset_id: 1024 hns3 0000:7d:00.0: PG pg_id: 0 hns3 0000:7d:00.0: PG dwrr: 100 hns3 0000:7d:00.0: QS qs_id: 0 hns3 0000:7d:00.0: QS dwrr: 100 hns3 0000:7d:00.0: PRI pri_id: 0 hns3 0000:7d:00.0: PRI dwrr: 100 hns3 0000:7d:00.0: PRI_C pri_id: 0 hns3 0000:7d:00.0: PRI_C pri_shapping: 0x2850000 hns3 0000:7d:00.0: PRI_P pri_id: 0 hns3 0000:7d:00.0: PRI_P pri_shapping: 0x2850796 hns3 0000:7d:00.0: PG_C pg_id: 0 hns3 0000:7d:00.0: PG_C pg_shapping: 0x2850000 hns3 0000:7d:00.0: PG_P pg_id: 0 hns3 0000:7d:00.0: PG_P pg_shapping: 0x2850496 hns3 0000:7d:00.0: PORT port_shapping: 0x2850296 hns3 0000:7d:00.0: PG_SCH pg_id: 0 hns3 0000:7d:00.0: PRI_SCH pg_id: 0 hns3 0000:7d:00.0: QS_SCH pg_id: 0 hns3 0000:7d:00.0: BP_TO_QSET pg_id: 0 hns3 0000:7d:00.0: BP_TO_QSET pg_shapping: 0x0 hns3 0000:7d:00.0: BP_TO_QSET qs_bit_map: 0x0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "tc config" info query functionliuzhongzhu4-0/+48
This patch prints tc config information. debugfs command: echo dump tc > cmd Sample Output: root@(none)# echo dump tc > cmd hns3 0000:7d:00.0: weight_offset: 14 hns3 0000:7d:00.0: tc(0): no sp mode hns3 0000:7d:00.0: tc(1): no sp mode hns3 0000:7d:00.0: tc(2): no sp mode hns3 0000:7d:00.0: tc(3): no sp mode hns3 0000:7d:00.0: tc(4): no sp mode hns3 0000:7d:00.0: tc(5): no sp mode hns3 0000:7d:00.0: tc(6): no sp mode hns3 0000:7d:00.0: tc(7): no sp mode root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "FD flow table" info query functionliuzhongzhu6-1/+83
All the Flow Director rules are stored in tcam blocks. For each bit of tcam entry, the match value depends on two input value(x, y). debugfs command: echo dump fd tcam > cmd Sample output: root@(none)# echo dump fd tcam > cmd hns3 0000:7d:00.0: read result tcam key x(31): hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 08000000 hns3 0000:7d:00.0: 00000600 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: read result tcam key y(31): hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: f7ff0000 hns3 0000:7d:00.0: 0000f900 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 00000000 hns3 0000:7d:00.0: 0000fff8 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add "queue info" query functionliuzhongzhu1-0/+122
Query the queue information of the current NIC such as BD size, queue header and tail pointer. This patch adds support for debugfs command: echo queue info 1 > cmd it can print queue config information... root@(none)# echo queue info 1 > cmd hns3 0000:7d:00.0: queue info hns3 0000:7d:00.0: RX(1) BASE ADD: 0x00000000ffb58000 hns3 0000:7d:00.0: RX(1) RING BD NUM: 127 hns3 0000:7d:00.0: RX(1) RING BD LEN: 2 hns3 0000:7d:00.0: RX(1) RING TAIL: 120 hns3 0000:7d:00.0: RX(1) RING HEAD: 0 hns3 0000:7d:00.0: RX(1) RING FBDNUM: 0 hns3 0000:7d:00.0: RX(1) RING PKTNUM: 0 hns3 0000:7d:00.0: TX(1) BASE ADD: 0x00000000fffd8000 hns3 0000:7d:00.0: TX(1) RING BD NUM: 127 hns3 0000:7d:00.0: TX(1) RING TC: 0 hns3 0000:7d:00.0: TX(1) RING TAIL: 2 hns3 0000:7d:00.0: TX(1) RING HEAD: 2 hns3 0000:7d:00.0: TX(1) RING FBDNUM: 0 hns3 0000:7d:00.0: TX(1) RING OFFSET: 0 hns3 0000:7d:00.0: TX(1) RING PKTNUM: 0 root@(none)# Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hns3: Add debugfs framework registrationliuzhongzhu5-3/+157
Add the debugfs framework to the driver and create a debugfs command interface for each device. example command: "echo queue info > cmd" Query the packet forwarding queue information. Signed-off-by: liuzhongzhu <liuzhongzhu@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-19net: hns3: add common validation in hclge_dcbYunsheng Lin3-35/+53
Before setting tm related configuration to hardware, driver needs to check the configuration provided by user is valid. Currently hclge_ieee_setets and hclge_setup_tc both implement their own checking, which has a lot in common. This patch addes hclge_dcb_common_validate to do the common checking. The checking in hclge_tm_prio_tc_info_update and hclge_tm_schd_info_update is unnecessary now, so change the return type to void, which removes the need to do error handling when one of the checking fails. Also, ets->prio_tc is indexed by user prio and ets->tc_tsa is indexed by tc num, so this patch changes them to use different index. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: hns3: up/down netdev in hclge module when setting mtuYunsheng Lin2-11/+3
Currently netdev is down in enet module, and it is before mtu range checking in hclge module, which may be cause netdev being down unnecessarily. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: hns3: Add mtu setting support for vfYunsheng Lin5-4/+70
The patch adds mtu setting support for vf, currently vf and pf share the same hardware mtu setting. Mtu set by vf must be less than or equal to pf' mtu, and mtu set by pf must be greater than or equal to vf' mtu. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: hns3: Add vport alive state checking supportYunsheng Lin8-2/+195
Currently there is no way for pf to know if a vf device is alive or not, so PF does not know which vf to notify when reset happens, or which vf's mtu is invalid when vf and pf share the same hardware mtu setting. This patch adds vport alive state checking support, in order to support the above scenario. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: hns3: Refactor mac mtu setting related functionsYunsheng Lin3-33/+27
This patch refactors mac mtu setting related functions, normalizes the use of mps and mtu. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-17net: hns3: Support two vlan header when setting mtuYunsheng Lin3-4/+5
This patch adds supports for two vlan header when setting mtu. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-16net: hns3: fix spelling mistake "failded" -> "failed"Colin Ian King1-2/+2
Trivial fix, the spelling of "failded" is incorrect in dev_err and dev_warn messages. Fix this. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: hns3: Adds GRO params to SKB for the stackPeng Li2-3/+49
When HW GRO enable, protocol stack will not do GRO again, driver should add gro param to the skb for the protocol stack.. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: hns3: Add skb chain when num of RX buf exceeds MAX_SKB_FRAGSPeng Li2-2/+37
MAX_SKB_FRAGS in protocol stack is defined as: MAX_SKB_FRAGS is 17 when PAGE_SIZE is 4K. If HW enable GRO, it may merge small packets and the rx buffer may be more than MAX_SKB_FRAGS. So driver will add skb chain when RX buffer num. more than MAX_SKB_FRAGS. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: hns3: Add support for ethtool -K to enable/disable HW GROPeng Li4-1/+32
This patch adds support of ethtool -K to enable/disable hardware GRO in HNS3 PF/VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: hns3: Add handling of GRO Pkts not fully RX'ed in NAPI pollPeng Li2-62/+140
The "FE bit" in the description means the last description for a packets. When HW GRO enable, HW write data to ring every packet/buffer, there is greater probability that driver handle with the describtion but HW still not set the "FE bit". When drier handle the packet and HW still not set "FE bit", driver stores skb and bd_num in rx ring, and continue to use the skb and bd_num in next napi. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-15net: hns3: Enable HW GRO for Rev B(=0x21) HNS3 hardwarePeng Li6-1/+83
HNS3 hardware Revision B(=0x21) supports Hardware GRO feature. This patch enables this feature in the HNS3 PF/VF driver. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn3-5/+16
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: add PCIe FLR support for VFHuazhong Tan2-2/+64
This patch implements the .reset_prepare and .reset_done ops from pci framework to support the VF FLR. This patch uses hclgevf_set_def_reset_request() and hclgevf_reset_event() to handle FLR, so when hdev->default_reset_request is non zero, it means there is some reset requseted by hclgevf_set_def_reset_request() need to be processed. Also get the hdev from the ae_dev because hclgevf_reset_event is called with handle being NULL. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: do VF's pci re-initialization while PF doing FLRHuazhong Tan3-8/+74
While doing PF FLR, VF's PCIe configuration space will be cleared, so the pci and vector of VF should be re-initialized in the VF's reset process while PF doing FLR. Also, this patch fixes some memory not freed problem when pci re-initialization is done during reset process. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: add PCIe FLR support for PFHuazhong Tan6-1/+100
This patch implements the .reset_prepare and .reset_done ops from pci framework to support the PF FLR. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: implement the IMP reset processing for PFHuazhong Tan3-9/+37
The current code only print the prompt message after receiving the IMP reset interrupt and does not perform the corresponding driver reset operation. This patch implements the missing IMP reset handling in the driver. 1. The driver sets the HCLGE_STATE_CMD_DISABLE to stop sending command after receiving the IMP reset interrupt. 2. The driver needs to notify the hardware to reload the IMP firmware. 3. The IMP firmware reloading makes the reset time of hardware longer, so it is necessary to extend the driver's waiting time to wait for the hardware reset to complete. 4. In hclge_check_event_cause, IMP reset event should have higher priority than other events. Also, after clearing HCLGE_STATE_CMD_DISABLE in the hclge_cmd_init(), it needs to check whether there is a pending reset, if so, just set the HCLGE_STATE_CMD_DISABLE back and return. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: stop napi polling when HNS3_NIC_STATE_DOWN is setHuazhong Tan1-6/+16
When calling napi_disable during reset down process, if NAPIF_STATE_MISSED is set, napi_complete will call __napi_schedule to do the polling again. So this patch uses HNS3_NIC_STATE_DOWN to ensure the polling is not scheduled again. Also, when napi_complete returns true, it means polling is scheduled again, it is not neccssary to enable the interrupt. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: add error handler for hclgevf_reset()Huazhong Tan1-14/+37
Since hclgevf_reset() may fail for some reasons, so it needs an error handler to deal with it. When VF reset failed, VF can only be restored by a higher level reset asserted by PF. So, it needs to reinitialize its command queue, then it can respond to higher level reset. Also, this patch adds error logging in the hclgevf_notify_client(). Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-09net: hns3: stop handling command queue while resetting VFHuazhong Tan4-1/+35
According to hardware's description, after the reset occurs, the driver needs to re-initialize the command queue before sending and receiving any commands. Therefore, the VF's driver needs to identify the command queue needs to re-initialize with HCLGEVF_STATE_CMD_DISABLE, and does not allow sending or receiving commands before the re-initialization. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.