aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/huawei (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-1/+1
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-07hinic: add fw version queryXue Chaojing4-0/+54
This patch adds firmware version query in ethtool -i. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02hinic: remove standard netdev statsXue Chaojing1-46/+1
This patch removes standard netdev stats in ethtool -S. Suggested-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-29hinic: add vlan offload supportXue Chaojing7-2/+97
This patch adds vlan offload support for the HINIC driver. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28hinic: reduce rss_init stack usageArnd Bergmann1-7/+13
On 32-bit architectures, putting an array of 256 u32 values on the stack uses more space than the warning limit: drivers/net/ethernet/huawei/hinic/hinic_main.c: In function 'hinic_rss_init': drivers/net/ethernet/huawei/hinic/hinic_main.c:286:1: error: the frame size of 1068 bytes is larger than 1024 bytes [-Werror=frame-larger-than=] I considered changing the code to use u8 values here, since that's all the hardware supports, but dynamically allocating the array is a more isolated fix here. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24hinic: implement the statistical interface of ethtoolXue Chaojing9-3/+620
This patch implement the statistical interface of ethtool, user can use ethtool -S to show hinic statistics. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-22hinic: fix dereference of pointer hwdev before it is null checkedColin Ian King1-6/+15
Currently pointer hwdev is dereferenced when assigning hwif before hwdev is null checked. Fix this by only derefencing hwdev after the null check. Addresses-Coverity: ("Dereference before null check") Fixes: 4fdc51bb4e92 ("hinic: add support for rss parameters with ethtool") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18hinic: add support for rss parameters with ethtoolXue Chaojing5-1/+479
This patch adds support rss parameters with ethtool, user can change hash key, hash indirection table, hash function by ethtool -X, and show rss parameters by ethtool -x. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18hinic: move ethtool code into hinic_ethtoolXue Chaojing4-134/+167
This patch moves ethtool code from hinic_main.c to hinic_ethtool.c Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-18hinic: add rss supportXue Chaojing7-8/+541
This patch adds rss support for the HINIC driver. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller31-310/+31
Honestly all the conflicts were simple overlapping changes, nothing really interesting to report. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-15hinic: Use devm_kasprintf instead of hard coding itChristophe JAILLET1-5/+3
'devm_kasprintf' is less verbose than: snprintf(NULL, 0, ...); devm_kzalloc(...); sprintf so use it instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 288Thomas Gleixner31-310/+31
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 263 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.208660670@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-04hinic: add LRO supportXue Chaojing10-13/+348
This patch adds LRO support for the HiNIC driver. Reported-by: kbuild test robot <lkp@intel.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28hinic: fix a bug in set rx modeXue Chaojing1-4/+0
in set_rx_mode, __dev_mc_sync and netdev_for_each_mc_addr will repeatedly set the multicast mac address. so we delete this loop. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner4-0/+4
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal1-1/+1
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22hinic: Add pci device idsXue Chaojing1-4/+6
This patch adds PCI device IDs to support following cards: 1. Add device id 0x0205 for HINIC 100GE dual port mezz card. 2. Add device id 0x0210 for HINIC 25GE quad port mezz card. 3. Delete device id 0x0201 for HINIC 100GE dual port card, because this is used by other product. 4. Macro of device id 0x200 is modified for HINIC 100GE dual port card. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-17net-next/hinic: replace disable_irq_nosync/enable_irqXue Chaojing6-4/+73
In order to avoid frequent system interrupts when sending and receiving packets. we replace disable_irq_nosync/enable_irq with hinic_set_msix_state(), hinic_set_msix_state is used to access memory mapped hinic devices. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain5-24/+24
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-01-02net-next/hinic:add shutdown callbackXue Chaojing1-0/+6
If there is no shutdown callback, our board will report pcie UNF errors after restarting. This patch add shutdown callback for hinic. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-11hinic: optmize rx refill buffer mechanismXue Chaojing2-20/+5
There is no need to schedule a different tasklet for refill, This patch remove it. Suggested-by: Neil Horman <nhorman@redhat.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23net: hinic: fix null pointer dereference on pointer hwdevColin Ian King1-2/+4
Pointer hwdev is being dereferenced when declaring hwif , however, later on hwdev is being null checked, hence we have dereference before null check error. Fix this by assigning hwif and pdef only once hwdev has been null checked. Detected by CoverityScan, CID#1485581 ("Dereference before null check") Fixes: 4a61abb100c8 ("net-next/hinic:add rx checksum offload for HiNIC") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic: fix a bug in rx data flowXue Chaojing1-1/+1
In rx_alloc_pkts(), there is a loop call of tasklet, which causes 100% cpu utilization, even no packets are being received. This patch fixes this bug. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:fix a bug in set mac addressXue Chaojing1-3/+4
In add_mac_addr(), if the MAC address is a muliticast address, it will not be set, which causes the network card fail to receive the multicast packet. This patch fixes this bug. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:add rx checksum offload for HiNICXue Chaojing7-1/+78
In order to improve performance, this patch adds rx checksum offload for the HiNIC driver. Performance test(Iperf) shows more than 80% improvement in TCP streams. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-20net-next/hinic:replace multiply and division operatorsXue Chaojing2-20/+38
To improve performance, this patch uses bit operations to replace multiply and division operators. Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29hinic: Fix l4_type parameter in hinic_task_set_tunnel_l4Nathan Chancellor2-2/+2
Clang warns: drivers/net/ethernet/huawei/hinic/hinic_tx.c:392:34: error: implicit conversion from enumeration type 'enum hinic_l4_tunnel_type' to different enumeration type 'enum hinic_l4_offload_type' [-Werror,-Wenum-conversion] hinic_task_set_tunnel_l4(task, TUNNEL_UDP_NO_CSUM, ~~~~~~~~~~~~~~~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~ 1 error generated. It seems that hinic_task_set_tunnel_l4 was meant to take an enum of type hinic_l4_tunnel_type, not hinic_l4_offload_type, given both the name of the functions and the values used. Fixes: cc18a7543d2f ("net-next/hinic: add checksum offload and TSO support") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-18net-next/hinic: add checksum offload and TSO supportZhao Chen10-60/+571
This patch adds checksum offload and TSO support for the HiNIC driver. Perfomance test (Iperf) shows more than 100% improvement in TCP streams. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: Xue Chaojing <xuechaojing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28hinic: remove ndo_poll_controllerEric Dumazet1-20/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. hinic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Note that hinic_netpoll() was incorrectly scheduling NAPI on both RX and TX queues. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-08net-next: hinic: fix a problem in free_tx_poll()Zhao Chen3-11/+49
This patch fixes the problem below. The problem can be reproduced by the following steps: 1) Connecting all HiNIC interfaces 2) On server side # sudo ifconfig eth0 192.168.100.1 up #Using MLX CX4 card # iperf -s 3) On client side # sudo ifconfig eth0 192.168.100.2 up #Using our HiNIC card # iperf -c 192.168.101.1 -P 10 -t 100000 after hours of testing, we will see errors: hinic 0000:05:00.0: No MGMT msg handler, mod = 0 hinic 0000:05:00.0: No MGMT msg handler, mod = 0 hinic 0000:05:00.0: No MGMT msg handler, mod = 0 hinic 0000:05:00.0: No MGMT msg handler, mod = 0 The errors are caused by the following problem. 1) The hinic_get_wqe() checks the "wq->delta" to allocate new WQEs: if (atomic_sub_return(num_wqebbs, &wq->delta) <= 0) { atomic_add(num_wqebbs, &wq->delta); return ERR_PTR(-EBUSY); } If the WQE occupies multiple pages, the shadow WQE will be used. Then the hinic_xmit_frame() fills the WQE. 2) While in parallel with 1), the free_tx_poll() checks the "wq->delta" to free old WQEs: if ((atomic_read(&wq->delta) + num_wqebbs) > wq->q_depth) return ERR_PTR(-EBUSY); There is a probability that the shadow WQE which hinic_xmit_frame() is using will be damaged by copy_wqe_to_shadow(): if (curr_pg != end_pg) { void *shadow_addr = &wq->shadow_wqe[curr_pg * wq->max_wqe_size]; copy_wqe_to_shadow(wq, shadow_addr, num_wqebbs, *cons_idx); return shadow_addr; } This can cause WQE data error and you will see the above error messages. This patch fixes the problem. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-02Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
The BTF conflicts were simple overlapping changes. The virtio_net conflict was an overlap of a fix of statistics counter, happening alongisde a move over to a bonafide statistics structure rather than counting value on the stack. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25hinic: Link the logical network device to the pci device in sysfsdann frazier1-0/+1
Otherwise interfaces get exposed under /sys/devices/virtual, which doesn't give udev the context it needs for PCI-based predictable interface names. Signed-off-by: dann frazier <dann.frazier@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
2018-07-19net-next/hinic: fix a problem in hinic_xmit_frame()Zhao Chen1-0/+1
The calculation of "wqe_size" is not correct when the tx queue is busy in hinic_xmit_frame(). When there are no free WQEs, the tx flow will unmap the skb buffer, then ring the doobell for the pending packets. But the "wqe_size" which used to calculate the doorbell address is not correct. The wqe size should be cleared to 0, otherwise, it will cause a doorbell error. This patch fixes the problem. Reported-by: Zhou Wang <wangzhou1@hisilicon.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-04net: hinic: remove redundant pointer pfhwdevColin Ian King1-3/+0
Pointer pfhwdev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'pfhwdev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28hinic: reset irq affinity before freeing irqWei Yongjun1-0/+1
Following warning is seen when rmmod hinic. This is because affinity value is not reset before calling free_irq(). This patch fixes it. [ 55.181232] WARNING: CPU: 38 PID: 19589 at kernel/irq/manage.c:1608 __free_irq+0x2aa/0x2c0 Fixes: 352f58b0d9f2 ("net-next/hinic: Set Rxq irq to specific cpu for NUMA") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-2/+3
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-08net-next/hinic: add pci device ids for 25ge and 100ge cardZhao Chen1-2/+6
This patch adds PCI device IDs to support 25GE and 100GE card: 1. Add device id 0x0201 for HINIC 100GE dual port card. 2. Add device id 0x0200 for HINIC 25GE dual port card. 3. Macro of device id 0x1822 is modified for HINIC 25GE quad port card. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net-next/hinic: add arm64 supportZhao Chen1-1/+1
This patch enables arm64 platform support for the HINIC driver. Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-02hinic: Replace PCI pool old APIRomain Perier2-6/+6
The PCI pool API is deprecated. Replace the PCI pool old API by the appropriate function with the DMA pool API. Signed-off-by: Romain Perier <romain.perier@collabora.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2017-09-28net-next/hinic: Fix a case of Tx Queue is Stopped foreverAviad Krawczyk1-2/+12
Fix the following scenario: 1. tx_free_poll is running on cpu X 2. xmit function is running on cpu Y and fails to get sq wqe 3. tx_free_poll frees wqes on cpu X and checks the queue is not stopped 4. xmit function stops the queue after failed to get sq wqe 5. The queue is stopped forever Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net-next/hinic: Set Rxq irq to specific cpu for NUMAAviad Krawczyk1-9/+9
Set Rxq irq to specific cpu for allocating and receiving the skb from the same node. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28hinic: don't build the module by defaultVitaly Kuznetsov1-1/+0
We probably don't want to enable code supporting particular hardware by default e.g. when someone does 'make defconfig'. Other ethernet modules don't do it. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28net-next/hinic: fix comparison of a uint16_t type with -1Aviad Krawczyk2-36/+22
Remove the search for index of constant buffer size Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28net-next/hinic: Fix MTU limitationAviad Krawczyk1-0/+1
Fix the hw MTU limitation by setting max_mtu Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25hinic: skb_pad() frees on errorDan Carpenter1-1/+2
The skb_pad() function frees the skb on error, so this code has a double free. Fixes: 00e57a6d4ad3 ("net-next/hinic: Add Tx operation") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-24hinic: uninitialized variable in hinic_api_cmd_init()Dan Carpenter1-0/+1
We never set the error code in this function. Fixes: eabf0fad81d5 ("net-next/hinic: Initialize api cmd resources") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23net: hinic: make functions set_ctrl0 and set_ctrl1 staticColin Ian King1-2/+2
The functions set_ctrl0 and set_ctrl1 are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: symbol 'set_ctrl0' was not declared. Should it be static? symbol 'set_ctrl1' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-22net-next/hinic: Add netpollAviad Krawczyk1-0/+20
Add more netdev operation - netpoll. Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com> Signed-off-by: Zhao Chen <zhaochen6@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.