aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ibm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-11-17net: annotate accesses to queue->trans_startEric Dumazet1-1/+1
In following patches, dev_watchdog() will no longer stop all queues. It will read queue->trans_start locklessly. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-9/+12
Merge in the fixes we had queued in case there was another -rc. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-01ibmvnic: delay complete()Sukadev Bhattiprolu1-7/+9
If we get CRQ_INIT, we set errno to -EIO and first call complete() to notify the waiter. Then we try to schedule a FAILOVER reset. If this occurs while adapter is in PROBING state, ibmvnic_reset() changes the error code to EAGAIN and returns without scheduling the FAILOVER. The purpose of setting error code to EAGAIN is to ask the waiter to retry. But due to the earlier complete() call, the waiter may already have seen the -EIO response and decided not to retry. This can cause intermittent failures when bringing up ibmvnic adapters during boot, specially in in kexec/kdump kernels. Defer the complete() call until after scheduling the reset. Also streamline the error code to EAGAIN. Don't see why we need EIO sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN. Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: Process crqs after enabling interruptsSukadev Bhattiprolu1-0/+3
Soon after registering a CRQ it is possible that we get a fail over or maybe a CRQ_INIT from the VIOS while interrupts were disabled. Look for any such CRQs after enabling interrupts. Otherwise we can intermittently fail to bring up ibmvnic adapters during boot, specially in kexec/kdump kernels. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-01ibmvnic: don't stop queue in xmitSukadev Bhattiprolu1-2/+0
If adapter's resetting bit is on, discard the packet but don't stop the transmit queue - instead leave that to the reset code. With this change, it is possible that we may get several calls to ibmvnic_xmit() that simply discard packets and return. But if we stop the queue here, we might end up doing so just after __ibmvnic_open() started the queues (during a hard/soft reset) and before the ->resetting bit was cleared. If that happens, there will be no one to restart queue and transmissions will be blocked indefinitely. This can cause a TIMEOUT reset and with auto priority failover enabled, an unnecessary FAILOVER reset to less favored backing device and then a FAILOVER back to the most favored backing device. If we hit the window repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER resets leaving the adapter unusable for extended periods of time. Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit") Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: ibmveth: use ether_addr_to_u64()Jakub Kicinski1-14/+3
We'll want to make netdev->dev_addr const, remove the local helper which is missing a const qualifier on the argument and use ether_addr_to_u64(). Similar story to mlx4. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: ibm/emac: use of_get_ethdev_address() to load dev_addrJakub Kicinski1-1/+1
A straggler I somehow missed in the automated conversion in commit 9ca01b25dfff ("ethernet: use of_get_ethdev_address()"). Use the new helper instead of using netdev->dev_addr directly. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski2-2/+2
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: ehea: add missing castJakub Kicinski1-1/+1
We need to cast the pointer, unlike memcpy() eth_hw_addr_set() does not take void *. The driver already casts &port->mac_addr to u8 * in other places. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: a96d317fb1a3 ("ethernet: use eth_hw_addr_set()") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski2-4/+3
Convert Ethernet from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski2-2/+2
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-8/+0
drivers/net/phy/bcm7xxx.c d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations") f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165") net/sched/sch_api.c b193e15ac69d ("net: prevent user from passing illegal stab size") 69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers") Both cases trivial - adjacent code additions. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-27net: ethernet: emac: utilize of_net's of_get_mac_address()Christian Lamparter1-7/+5
of_get_mac_address() reads the same "local-mac-address" property. ... But goes above and beyond by checking the MAC value properly. printk+message seems outdated too, so let's put dev_err in the queue. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27ibmveth: Use dma_alloc_coherent() instead of kmalloc/dma_map_single()Cai Huoqing1-16/+9
Replacing kmalloc/kfree/dma_map_single/dma_unmap_single() with dma_alloc_coherent/dma_free_coherent() helps to reduce code size, and simplify the code, and coherent DMA will not clear the cache every time. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-27Revert "ibmvnic: check failover_pending in login response"Desnes A. Nunes do Rosario1-8/+0
This reverts commit d437f5aa23aa2b7bd07cd44b839d7546cc17166f. Code has been duplicated through commit <273c29e944bd> "ibmvnic: check failover_pending in login response" Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+16
No conflicts! Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-15ibmvnic: Reuse tx pools when possibleSukadev Bhattiprolu2-70/+147
Rather than releasing the tx pools on every close and reallocating them on open, reuse the tx pools unless the pool parameters (number of pools, size of each pool or size of each buffer in a pool) have changed. If the pool parameters changed, then release the old pools (if any) and allocate new ones. Specifically release tx pools, if: - adapter is removed, - pool parameters change during reset, - we encounter an error when opening the adapter in response to a user request (in ibmvnic_open()). and don't release them: - in __ibmvnic_close() or - on errors in __ibmvnic_open() in the hope that we can reuse them during this or next reset. With these changes reset_tx_pools() can be dropped because its optimization is now included in init_tx_pools() itself. cleanup_tx_pools() releases all the skbs associated with the pool and is called from ibmvnic_cleanup(), which is called on every reset. Since we want to reuse skbs across resets, move cleanup_tx_pools() out of ibmvnic_cleanup() and call it only when user closes the adapter. Add two new adapter fields, ->prev_mtu, ->prev_tx_pool_size to track the previous values and use them to decide whether to reuse or realloc the pools. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Reuse rx pools when possibleSukadev Bhattiprolu2-64/+137
Rather than releasing the rx pools on and reallocating them on every reset, reuse the rx pools unless the pool parameters (number of pools, size of each pool or size of each buffer in a pool) have changed. If the pool parameters changed, then release the old pools (if any) and allocate new ones. Specifically release rx pools, if: - adapter is removed, - pool parameters change during reset, - we encounter an error when opening the adapter in response to a user request (in ibmvnic_open()). and don't release them: - in __ibmvnic_close() or - on errors in __ibmvnic_open() in the hope that we can reuse them on the next reset. With these, reset_rx_pools() can be dropped because its optimzation is now included in init_rx_pools() itself. cleanup_rx_pools() releases all the skbs associated with the pool and is called from ibmvnic_cleanup(), which is called on every reset. Since we want to reuse skbs across resets, move cleanup_rx_pools() out of ibmvnic_cleanup() and call it only when user closes the adapter. Add two new adapter fields, ->prev_rx_buf_sz, ->prev_rx_pool_size to keep track of the previous values and use them to decide whether to reuse or realloc the pools. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Reuse LTB when possibleSukadev Bhattiprolu1-63/+74
Reuse the long term buffer during a reset as long as its size has not changed. If the size has changed, free it and allocate a new one of the appropriate size. When we do this, alloc_long_term_buff() and reset_long_term_buff() become identical. Drop reset_long_term_buff(). Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Use bitmap for LTB map_idsSukadev Bhattiprolu2-5/+10
In a follow-on patch, we will reuse long term buffers when possible. When doing so we have to be careful to properly assign map ids. We can no longer assign them sequentially because a lower map id may be available and we could wrap at 255 and collide with an in-use map id. Instead, use a bitmap to track active map ids and to find a free map id. Don't need to take locks here since the map_id only changes during reset and at that time only the reset worker thread should be using the adapter. Noticed this when analyzing an error Dany Madden ran into with the patch set. Reported-by: Dany Madden <drt@linux.ibm.com> Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: init_tx_pools move loop-invariant codeSukadev Bhattiprolu1-3/+2
In init_tx_pools() move some loop-invariant code out of the loop. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Use/rename local vars in init_tx_poolsSukadev Bhattiprolu1-14/+16
Use/rename local variables in init_tx_pools() for consistency with init_rx_pools() and for readability. Also add some comments Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Use/rename local vars in init_rx_poolsSukadev Bhattiprolu2-9/+10
To make the code more readable, use/rename some local variables. Basically we have a set of pools, num_pools. Each pool has a set of buffers, pool_size and each buffer is of size buff_size. pool_size is a bit ambiguous (whether size in bytes or buffers). Add a comment in the header file to make it explicit. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Fix up some comments and messagesSukadev Bhattiprolu1-6/+38
Add/update some comments/function headers and fix up some messages. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15ibmvnic: Consolidate code in replenish_rx_pool()Sukadev Bhattiprolu1-3/+7
For better readability, consolidate related code in replenish_rx_pool() and add some comments. Reviewed-by: Rick Lindsley <ricklind@linux.vnet.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09ibmvnic: check failover_pending in login responseSukadev Bhattiprolu1-0/+8
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08ibmvnic: check failover_pending in login responseSukadev Bhattiprolu1-0/+8
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann2-3/+3
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-21ibmvnic: Remove the proper scrq flushSukadev Bhattiprolu1-1/+1
Commit 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") intended to remove the call to ibmvnic_tx_scrq_flush() when the ->resetting flag is true and was tested that way. But during the final rebase to net-next, the hunk got applied to a block few lines below (which happened to have the same diff context) and the wrong call to ibmvnic_tx_scrq_flush() got removed. Fix that by removing the correct ibmvnic_tx_scrq_flush() and restoring the one that was incorrectly removed. Fixes: 65d6470d139a ("ibmvnic: clean pending indirect buffs during reset") Reported-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-01ibmvnic: retry reset if there are no other resetsSukadev Bhattiprolu1-3/+19
Normally, if a reset fails due to failover or other communication error there is another reset (eg: FAILOVER) in the queue and we would process that reset. But if we are unable to communicate with PHYP or VIOS after H_FREE_CRQ, there would be no other resets in the queue and the adapter would be in an undefined state even though it was in the OPEN state earlier. While starting the reset we set the carrier to off state so we won't even get the timeout resets. If the last queued reset fails, retry it as a hard reset (after the usual 60 second settling time). Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-24/+77
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-24ibmvnic: parenthesize a checkSukadev Bhattiprolu1-1/+1
Parenthesize a check to be more explicit and to fix a sparse warning seen on some distros. Fixes: 91dc5d2553fbf ("ibmvnic: fix miscellaneous checks") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24ibmvnic: free tx_pool if tso_pool alloc failsSukadev Bhattiprolu1-1/+4
Free tx_pool and clear it, if allocation of tso_pool fails. release_tx_pools() assumes we have both tx and tso_pools if ->tx_pool is non-NULL. If allocation of tso_pool fails in init_tx_pools(), the assumption will not be true and we would end up dereferencing ->tx_buff, ->free_map fields from a NULL pointer. Fixes: 3205306c6b8d ("ibmvnic: Update TX pool initialization routine") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24ibmvnic: set ltb->buff to NULL after freeingSukadev Bhattiprolu1-11/+15
free_long_term_buff() checks ltb->buff to decide whether we have a long term buffer to free. So set ltb->buff to NULL afer freeing. While here, also clear ->map_id, fix up some coding style and log an error. Fixes: 9c4eaabd1bb39 ("Check CRQ command return codes") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24ibmvnic: account for bufs already saved in indir_bufSukadev Bhattiprolu1-1/+8
This fixes a crash in replenish_rx_pool() when called from ibmvnic_poll() after a previous call to replenish_rx_pool() encountered an error when allocating a socket buffer. Thanks to Rick Lindsley and Dany Madden for helping debug the crash. Fixes: 4f0b6812e9b9 ("ibmvnic: Introduce batched RX buffer descriptor transmission") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24ibmvnic: clean pending indirect buffs during resetSukadev Bhattiprolu1-2/+6
We batch subordinate command response queue (scrq) descriptors that we need to send to the VIOS using an "indirect" buffer. If after we queue one or more scrqs in the indirect buffer encounter an error (say fail to allocate an skb), we leave the queued scrq descriptors in the indirect buffer until the next call to ibmvnic_xmit(). On the next call to ibmvnic_xmit(), it is possible that the adapter is going through a reset and it is possible that the long term buffers have been unmapped on the VIOS side. If we proceed to flush (send) the packets that are in the indirect buffer, we will end up using the old map ids and this can cause the VIOS to trigger an unnecessary FATAL error reset. Instead of flushing packets remaining on the indirect_buff, discard (clean) them instead. Fixes: 0d973388185d4 ("ibmvnic: Introduce xmit_more support using batched subCRQ hcalls") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24Revert "ibmvnic: remove duplicate napi_schedule call in open function"Dany Madden1-0/+5
This reverts commit 7c451f3ef676c805a4b77a743a01a5c21a250a73. When a vnic interface is taken down and then up, connectivity is not restored. We bisected it to this commit. Reverting this commit until we can fully investigate the issue/benefit of the change. Fixes: 7c451f3ef676 ("ibmvnic: remove duplicate napi_schedule call in open function") Reported-by: Cristobal Forno <cforno12@linux.ibm.com> Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-24Revert "ibmvnic: simplify reset_long_term_buff function"Sukadev Bhattiprolu1-8/+38
This reverts commit 1c7d45e7b2c29080bf6c8cd0e213cc3cbb62a054. We tried to optimize the number of hcalls we send and skipped sending the REQUEST_MAP calls for some maps. However during resets, we need to resend all the maps to the VIOS since the VIOS does not remember the old values. In fact we may have failed over to a new VIOS which will not have any of the mappings. When we send packets with map ids the VIOS does not know about, it triggers a FATAL reset. While the client does recover from the FATAL error reset, we are seeing a large number of such resets. Handling FATAL resets is lot more unnecessary work than issuing a few more hcalls so revert the commit and resend the maps to the VIOS. Fixes: 1c7d45e7b2c ("ibmvnic: simplify reset_long_term_buff function") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-23ibmveth: Set CHECKSUM_PARTIAL if NULL TCP CSUM.David Wilder1-23/+28
TCP checksums on received packets may be set to NULL by the sender if CSO is enabled. The hypervisor flags these packets as check-sum-ok and the skb is then flagged CHECKSUM_UNNECESSARY. If these packets are then forwarded the sender will not request CSO due to the CHECKSUM_UNNECESSARY flag. The result is a TCP packet sent with a bad checksum. This change sets up CHECKSUM_PARTIAL on these packets causing the sender to correctly request CSUM offload. Signed-off-by: David Wilder <dwilder@us.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.vnet.ibm.com> Tested-by: Cristobal Forno <cforno12@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-21ibmvnic: Use strscpy() instead of strncpy()Kees Cook1-3/+3
Since these strings are expected to be NUL-terminated and the buffers are exactly sized (in vnic_client_data_len()) with no padding, strncpy() can be safely replaced with strscpy() here, as strncpy() on NUL-terminated string is considered deprecated[1]. This has the side-effect of silencing a -Warray-bounds warning due to the compiler being confused about the vlcd incrementing: In file included from ./include/linux/string.h:253, from ./include/linux/bitmap.h:10, from ./include/linux/cpumask.h:12, from ./include/linux/mm_types_task.h:14, from ./include/linux/mm_types.h:5, from ./include/linux/buildid.h:5, from ./include/linux/module.h:14, from drivers/net/ethernet/ibm/ibmvnic.c:35: In function '__fortify_strncpy', inlined from 'vnic_add_client_data' at drivers/net/ethernet/ibm/ibmvnic.c:3919:2: ./include/linux/fortify-string.h:39:30: warning: '__builtin_strncpy' offset 12 from the object at 'v lcd' is out of the bounds of referenced subobject 'name' with type 'char[]' at offset 12 [-Warray-bo unds] 39 | #define __underlying_strncpy __builtin_strncpy | ^ ./include/linux/fortify-string.h:51:9: note: in expansion of macro '__underlying_strncpy' 51 | return __underlying_strncpy(p, q, size); | ^~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/ibm/ibmvnic.c: In function 'vnic_add_client_data': drivers/net/ethernet/ibm/ibmvnic.c:3883:7: note: subobject 'name' declared here 3883 | char name[]; | ^~~~ [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings Cc: Dany Madden <drt@linux.ibm.com> Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Cc: Thomas Falcon <tlfalcon@linux.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-14ibmvnic: fix send_request_map incompatible argumentLijun Pan1-1/+1
The 3rd argument is u32 by function definition while it is __be32 by function declaration. Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12ibmvnic: fix kernel build warnings in build_hdr_descs_arrLijun Pan1-1/+2
Fix the following kernel build warnings: drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'skb' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Function parameter or member 'indir_arr' not described in 'build_hdr_descs_arr' drivers/net/ethernet/ibm/ibmvnic.c:1516: warning: Excess function parameter 'txbuff' description in 'build_hdr_descs_arr' Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-12ibmvnic: fix kernel build warningLijun Pan1-0/+4
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘adapter_state_to_string’: drivers/net/ethernet/ibm/ibmvnic.c:855:2: warning: enumeration value ‘VNIC_DOWN’ not handled in switch [-Wswitch] 855 | switch (state) { | ^~~~~~ drivers/net/ethernet/ibm/ibmvnic.c: In function ‘reset_reason_to_string’: drivers/net/ethernet/ibm/ibmvnic.c:1958:2: warning: enumeration value ‘VNIC_RESET_PASSIVE_INIT’ not handled in switch [-Wswitch] 1958 | switch (reason) { | ^~~~~~ Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11ibmvnic: fix kernel build warning in strncpyLijun Pan1-1/+1
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘handle_vpd_rsp’: drivers/net/ethernet/ibm/ibmvnic.c:4393:3: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation] 4393 | strncpy((char *)adapter->fw_version, "N/A", 3 * sizeof(char)); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10ibmvnic: Allow device probe if the device is not ready at bootCristobal Forno2-27/+132
Allow the device to be initialized at a later time if it is not available at boot. The device will be allowed to probe but will be given a "down" state. After completing device probe and registering the net device, the driver will await an interrupt signal from its partner device, indicating that it is ready for boot. The driver will schedule a work event to perform the necessary procedure and begin operation. Co-developed-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: Cristobal Forno <cforno12@linux.ibm.com> Acked-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-10ibmvnic: Use list_for_each_entry() to simplify code in ibmvnic.cWang Hai1-2/+1
Convert list_for_each() to list_for_each_entry() where applicable. This simplifies the code. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Lijun Pan <lijunp213@gmail.com> Reviewed-by: Dany Madden <drt@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-28ehea: fix error return code in ehea_restart_qps()Zhen Lei1-4/+5
Fix to return -EFAULT from the error handling case instead of 0, as done elsewhere in this function. By the way, when get_zeroed_page() fails, directly return -ENOMEM to simplify code. Fixes: 2c69448bbced ("ehea: DLPAR memory add fix") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Link: https://lore.kernel.org/r/20210528085555.9390-1-thunder.leizhen@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-23ehea: Use DEVICE_ATTR_*() macroYueHaibing1-9/+9
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-20ibmvnic: remove default label from to_string switchMichal Suchanek1-4/+2
This way the compiler warns when a new value is added to the enum but not to the string translation like: drivers/net/ethernet/ibm/ibmvnic.c: In function 'adapter_state_to_string': drivers/net/ethernet/ibm/ibmvnic.c:832:2: warning: enumeration value 'VNIC_FOOBAR' not handled in switch [-Wswitch] switch (state) { ^~~~~~ drivers/net/ethernet/ibm/ibmvnic.c: In function 'reset_reason_to_string': drivers/net/ethernet/ibm/ibmvnic.c:1935:2: warning: enumeration value 'VNIC_RESET_FOOBAR' not handled in switch [-Wswitch] switch (reason) { ^~~~~~ Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Lijun Pan <lijunp213@gmail.com> Link: https://lore.kernel.org/netdev/CAOhMmr701LecfuNM+EozqbiTxFvDiXjFdY2aYeKJYaXq9kqVDg@mail.gmail.com/ Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: ibm: remove leading spaces before tabsHui Tang1-1/+1
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Cc: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: Hui Tang <tanghui20@huawei.com> Acked-by: Lijun Pan <lijunp213@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.