aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ibm (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-3/+6
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-30/+0
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01ibmvnic: Add ethtool private flag for driver-defined queue limitsThomas Falcon2-35/+100
When choosing channel amounts and ring sizes, the maximums in the ibmvnic driver are defined by the virtual i/o server management partition. Even though they are defined as maximums, the client driver may in fact successfully request resources that exceed these limits, which are mostly dependent on a user's hardware With this in mind, provide an ethtool flag that when enabled will allow the user to request resources limited by driver-defined maximums instead of limits defined by the management partition. The driver will try to honor the user's request but may not allowed by the management partition. In this case, the driver requests as close as it can get to the desired amount until it succeeds. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01ibmvnic: Introduce driver limits for ring sizesThomas Falcon1-0/+1
Introduce driver-defined maximums for queue ring sizes. Devices available for IBM vNIC today will likely not allow this amount, but this should give us some leeway for future devices that may support larger ring sizes. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01ibmvnic: Increase maximum queue size limitThomas Falcon1-1/+1
Increase queue size limit to 16. Devices available for IBM vNIC today will not allow this amount, but this should give us some leeway for future devices that may support more RX or TX queues. Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28ibmvnic: remove ndo_poll_controllerEric Dumazet1-16/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ibmvnic uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. ibmvnic_netpoll_controller() was completely wrong anyway, as it was scheduling NAPI to service RX queues (instead of TX), so I doubt netpoll ever worked on this driver. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-28ehea: remove ndo_poll_controllerEric Dumazet1-14/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ehea uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Douglas Miller <dougmill@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+10
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ibm: remove redundant local variables 'act_nr_of_entries' and 'act_pages'zhong jiang1-3/+1
That local variable are never used after being assigned. hence it should be redundant and can be removed. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: ibm: remove a redundant local variable 'k'zhong jiang1-2/+1
The local variable 'k' is never used after being assigned. hence it should be redundant adn can be removed. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ethernet: remove redundant includezhong jiang1-1/+0
module.h already contained moduleparam.h, so it is safe to remove the redundant include. The issue is detected with the help of Coccinelle. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: ibm: fix return type of ndo_start_xmit functionYueHaibing3-6/+7
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: emac: fix fixed-link setup for the RTL8363SB switchChristian Lamparter1-5/+10
On the Netgear WNDAP620, the emac ethernet isn't receiving nor xmitting any frames from/to the RTL8363SB (identifies itself as a RTL8367RB). This is caused by the emac hardware not knowing the forced link parameters for speed, duplex, pause, etc. This begs the question, how this was working on the original driver code, when it was necessary to set the phy_address and phy_map to 0xffffffff. But I guess without access to the old PPC405/440/460 hardware, it's not possible to know. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-13net/ibm/emac: Remove VLA usageKees Cook2-1/+8
In the quest to remove all stack VLA usage from the kernel[1], this removes the VLA used for the emac xaht registers size. Since the size of registers can only ever be 4 or 8, as detected in emac_init_config(), the max can be hardcoded and a runtime test added for robustness. [1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com Cc: "David S. Miller" <davem@davemloft.net> Cc: Christian Lamparter <chunkeey@gmail.com> Cc: Ivan Mikhaylov <ivan@de.ibm.com> Cc: netdev@vger.kernel.org Co-developed-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use DIV_ROUND_UP instead of reimplementing its functionzhong jiang1-1/+1
DIV_ROUND_UP has implemented the code-opened function. Therefore, just replace the implementation with DIV_ROUND_UP. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Acked-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-03net/ibm/emac: wrong emac_calc_base call was used by typoIvan Mikhaylov1-3/+3
__emac_calc_base_mr1 was used instead of __emac4_calc_base_mr1 by copy-paste mistake for emac4syn. Fixes: 45d6e545505fd32edb812f085be7de45b6a5c0af ("net/ibm/emac: add 8192 rx/tx fifo size") Signed-off-by: Ivan Mikhaylov <ivan@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31ibmvnic: Include missing return code checks in reset functionThomas Falcon1-3/+9
Check the return codes of these functions and halt reset in case of failure. The driver will remain in a dormant state until the next reset event, when device initialization will be re-attempted. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07ibmvnic: Update firmware error reporting with cause stringThomas Falcon1-4/+30
Print a string instead of the error code. Since there is a possibility that the driver can recover, classify it as a warning instead of an error. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07ibmvnic: Remove code to request error informationThomas Falcon2-176/+1
When backing device firmware reports an error, it provides an error ID, which is meant to be queried for more detailed error information. Currently, however, an error ID is not provided by the Virtual I/O server and there are not any plans to do so. For now, it is always unfilled or zero, so request_error_information will never be called. Remove it. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Fix error recovery on login failureJohn Allen1-2/+2
Testing has uncovered a failure case that is not handled properly. In the event that a login fails and we are not able to recover on the spot, we return 0 from do_reset, preventing any error recovery code from being triggered. Additionally, the state is set to "probed" meaning that when we are able to trigger the error recovery, the driver always comes up in the probed state. To handle the case properly, we need to return a failure code here and set the adapter state to the state that we entered the reset in indicating the state that we would like to come out of the recovery reset in. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-16ibmvnic: Revise RX/TX queue error messagesThomas Falcon1-12/+27
During a device failover, there may be latency between the loss of the current backing device and a notification from firmware that a failover has occurred. This latency can result in a large amount of error printouts as firmware returns outgoing traffic with a generic error code. These are not necessarily errors in this case as the firmware is busy swapping in a new backing adapter and is not ready to send packets yet. This patch reclassifies those error codes as warnings with an explanation that a failover may be pending. All other return codes will be considered errors. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-1/+1
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+15
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25ibmvnic: Fix partial success login retriesThomas Falcon1-1/+6
In its current state, the driver will handle backing device login in a loop for a certain number of retries while the device returns a partial success, indicating that the driver may need to try again using a smaller number of resources. The variable it checks to continue retrying may change over the course of operations, resulting in reallocation of resources but exits without sending the login attempt. Guard against this by introducing a boolean variable that will retain the state indicating that the driver needs to reattempt login with backing device firmware. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Introduce hard reset recoveryThomas Falcon2-4/+98
Introduce a recovery hard reset to handle reset failure as a result of change of device context following a transport event, such as a backing device failover or partition migration. These operations reset the device context to its initial state. If this occurs during a reset, any initialization commands are likely to fail with an invalid state error as backing device firmware requests reinitialization. When this happens, make one more attempt by performing a hard reset, which frees any resources currently allocated and performs device initialization. If a transport event occurs during a device reset, a flag is set which will trigger a new hard reset following the completionof the current reset event. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Set resetting state at earliest possible pointThomas Falcon1-2/+1
Set device resetting state at the earliest possible point: as soon as a reset is successfully scheduled. The reset state is toggled off when all resets have been processed to completion. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Create separate initialization routine for resetsThomas Falcon1-2/+46
Instead of having one initialization routine for all cases, create a separate, simpler function for standard initialization, such as during device probe. Use the original initialization function to handle device reset scenarios. The goal of this patch is to avoid having a single, cluttered init function to handle all possible scenarios. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Handle error case when setting link stateThomas Falcon1-0/+4
If setting the link state is not successful, print a warning with the resulting return code and return it to be handled by the caller. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Return error code if init interrupted by transport eventThomas Falcon1-1/+4
If device init is interrupted by a failover, set the init return code so that it can be checked and handled appropriately by the init routine. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Check CRQ command return codesThomas Falcon1-14/+37
Check whether CRQ command is successful before awaiting a response from the management partition. If the command was not successful, the driver may hang waiting for a response that will never come. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Introduce active CRQ stateThomas Falcon2-0/+11
Introduce an "active" state for a IBM vNIC Command-Response Queue. A CRQ is considered active once it has initialized or linked with its partner by sending an initialization request and getting a successful response back from the management partition. Until this has happened, do not allow CRQ commands to be sent other than the initialization request. This change will avoid a protocol error in case of a device transport event occurring during a initialization. When the driver receives a transport event notification indicating that the backing hardware has changed and needs reinitialization, any further commands other than the initialization handshake with the VIOS management partition will result in an invalid state error. Instead of sending a command that will be returned with an error, print a warning and return an error that will be handled by the caller. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24ibmvnic: Mark NAPI flag as disabled when releasedThomas Falcon1-0/+1
Set adapter NAPI state as disabled if they are removed. This will allow them to be enabled again if reallocated in case of a hard reset. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23ibmvnic: Only do H_EOI for mobility eventsNathan Fontenot1-6/+9
When enabling the sub-CRQ IRQ a previous update sent a H_EOI prior to the enablement to clear any pending interrupts that may be present across a partition migration. This fixed a firmware bug where a migration could erroneously indicate that a H_EOI was pending. The H_EOI should only be sent when enabling during a mobility event though. Doing so at other time could wrong and can produce extra driver output when IRQs are enabled when doing TX completion. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Fix statistics buffers memory leakThomas Falcon1-9/+15
Move initialization of statistics buffers from ibmvnic_init function into ibmvnic_probe. In the current state, ibmvnic_init will be called again during a device reset, resulting in the allocation of new buffers without freeing the old ones. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Fix non-fatal firmware error resetThomas Falcon1-2/+1
It is not necessary to disable interrupt lines here during a reset to handle a non-fatal firmware error. Move that call within the code block that handles the other cases that do require interrupts to be disabled and re-enabled. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17ibmvnic: Free coherent DMA memory if FW map failedThomas Falcon1-0/+1
If the firmware map fails for whatever reason, remember to free up the memory after. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-22ibmvnic: Clean actual number of RX or TX poolsThomas Falcon1-2/+2
Avoid using value stored in the login response buffer when cleaning TX and RX buffer pools since these could be inconsistent depending on the device state. Instead use the field in the driver's private data that tracks the number of active pools. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16ibmvnic: Clear pending interrupt after device resetThomas Falcon1-4/+11
Due to a firmware bug, the hypervisor can send an interrupt to a transmit or receive queue just prior to a partition migration, not allowing the device enough time to handle it and send an EOI. When the partition migrates, the interrupt is lost but an "EOI-pending" flag for the interrupt line is still set in firmware. No further interrupts will be sent until that flag is cleared, effectively freezing that queue. To workaround this, the driver will disable the hardware interrupt and send an H_EOI signal prior to re-enabling it. This will flush the pending EOI and allow the driver to continue operation. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12ibmvnic: Do not notify peers on parameter change resetsNathan Fontenot1-1/+2
When attempting to change the driver parameters, such as the MTU value or number of queues, do not call netdev_notify_peers(). Doing so will deadlock on the rtnl_lock. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12ibmvnic: Handle all login error conditionsNathan Fontenot2-21/+35
There is a bug in handling the possible return codes from sending the login CRQ. The current code treats any non-success return value, minus failure to send the crq and a timeout waiting for a login response, as a need to re-send the login CRQ. This can put the drive in an infinite loop of trying to login when getting return values other that a partial success such as a return code of aborted. For these scenarios the login will not ever succeed at this point and the driver would need to be reset again. To resolve this loop trying to login is updated to only retry the login if the driver gets a return code of a partial success. Other return codes are treated as an error and the driver returns an error from ibmvnic_login(). To avoid infinite looping in the partial success return cases, the number of retries is capped at the maximum number of supported queues. This value was chosen because the driver does a renegotiation of capabilities which sets the number of queues possible and allows the driver to attempt a login for possible value for the number of queues supported. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-12ibmvnic: Define vnic_login_client_data name field as unsized arrayKees Cook1-6/+6
The "name" field of struct vnic_login_client_data is a char array of undefined length. This should be written as "char name[]" so the compiler can make better decisions about the field (for example, not assuming it's a single character). This was noticed while trying to tighten the CONFIG_FORTIFY_SOURCE checking. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08ibmvnic: Do not reset CRQ for Mobility driver resetsNathan Fontenot1-23/+32
When resetting the ibmvnic driver after a partition migration occurs there is no requirement to do a reset of the main CRQ. The current driver code does the required re-enable of the main CRQ, then does a reset of the main CRQ later. What we should be doing for a driver reset after a migration is to re-enable the main CRQ, release all the sub-CRQs, and then allocate new sub-CRQs after capability negotiation. This patch updates the handling of mobility resets to do the proper work and not reset the main CRQ. To do this the initialization/reset of the main CRQ had to be moved out of the ibmvnic_init routine and in to the ibmvnic_probe and do_reset routines. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08ibmvnic: Fix failover case for non-redundant configurationThomas Falcon2-8/+30
There is a failover case for a non-redundant pseries VNIC configuration that was not being handled properly. The current implementation assumes that the driver will always have a redandant device to communicate with following a failover notification. There are cases, however, when a non-redundant configuration can receive a failover request. If that happens, the driver should wait until it receives a signal that the device is ready for operation. The driver is agnostic of its backing hardware configuration, so this fix necessarily affects all device failover management. The driver needs to wait until it receives a signal that the device is ready for resetting. A flag is introduced to track this intermediary state where the driver is waiting for an active device. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08ibmvnic: Fix reset scheduler error handlingThomas Falcon1-10/+29
In some cases, if the driver is waiting for a reset following a device parameter change, failure to schedule a reset can result in a hang since a completion signal is never sent. If the device configuration is being altered by a tool such as ethtool or ifconfig, it could cause the console to hang if the reset request does not get scheduled. Add some additional error handling code to exit the wait_for_completion if there is one in progress. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08ibmvnic: Zero used TX descriptor counter on resetThomas Falcon1-0/+1
The counter that tracks used TX descriptors pending completion needs to be zeroed as part of a device reset. This change fixes a bug causing transmit queues to be stopped unnecessarily and in some cases a transmit queue stall and timeout reset. If the counter is not reset, the remaining descriptors will not be "removed", effectively reducing queue capacity. If the queue is over half full, it will cause the queue to stall if stopped. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08ibmvnic: Fix DMA mapping mistakesThomas Falcon1-8/+6
Fix some mistakes caught by the DMA debugger. The first change fixes a unnecessary unmap that should have been removed in an earlier update. The next hunk fixes another bad unmap by zeroing the bit checked to determine that an unmap is needed. The final change fixes some buffers that are unmapped with the wrong direction specified. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01ibmvnic: Disable irqs before exiting reset from closed stateJohn Allen1-10/+18
When the driver is closed, all the associated irqs are disabled. In the event that the driver exits a reset in the closed state, we should be consistent with the state we are in directly after a close. So before we exit the reset routine, all irqs should be disabled as well. This will prevent the irqs from being enabled twice in this case and reporting a number of noisy warning traces. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches2-5/+4
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25ibmvnic: Potential NULL dereference in clean_one_tx_pool()Dan Carpenter1-1/+1
There is an && vs || typo here, which potentially leads to a NULL dereference. Fixes: e9e1e97884b7 ("ibmvnic: Update TX pool cleaning routine") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17ibmvnic: Remove unused TSO resources in TX pool structureThomas Falcon1-2/+0
Finally, remove the TSO-specific fields in the TX pool strcutures. These are no longer needed with the introduction of separate buffer pools for TSO transmissions. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.