aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-07net: ethernet: intel: Demote MTU change prints to debugFlorian Fainelli1-1/+2
Changing a network device MTU can be a fairly frequent operation, and failure to change the MTU is reflected to user-space properly, both by an appropriate message as well as by looking at whether the device's MTU matches the configuration. Demote the prints to debug prints by using netdev_dbg(), making all Intel wired LAN drivers consistent, since they used a mixture of PCI device and network device prints before. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-29e1000e: Fix compiler warning when CONFIG_PM_SLEEP is not setSasha Neftin1-0/+2
When CONFIG_PM_SLEEP is not defined compiler complain as follow: CC [M] drivers/net/ethernet/intel/e1000e/netdev.o drivers/net/ethernet/intel/e1000e/netdev.c:6302:12: warning: ‘e1000e_s0ix_entry_flow’ defined but not used [-Wunused-function] static void e1000e_s0ix_entry_flow(struct e1000_adapter *adapter) drivers/net/ethernet/intel/e1000e/netdev.c:6411:12: warning: ‘e1000e_s0ix_exit_flow’ defined but not used [-Wunused-function] static void e1000e_s0ix_exit_flow(struct e1000_adapter *adapter) LD [M] drivers/net/ethernet/intel/e1000e/e1000e.o Add wrap to fix these warnings. Reported-by: kbuild test robot <lpk@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Add support for Tiger LakeSasha Neftin5-1/+26
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Tiger Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Drop unnecessary __E1000_DOWN bit twiddlingAlexander Duyck1-6/+1
Since we no longer check for __E1000_DOWN in e1000e_close we can drop the spot where we were restoring the bit. This saves us a bit of unnecessary complexity. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-29e1000e: Use rtnl_lock to prevent race conditions between net and pci/pmAlexander Duyck1-33/+35
This patch is meant to address possible race conditions that can exist between network configuration and power management. A similar issue was fixed for igb in commit 9474933caf21 ("igb: close/suspend race in netif_device_detach"). In addition it consolidates the code so that the PCI error handling code will essentially perform the power management freeze on the device prior to attempting a reset, and will thaw the device afterwards if that is what it is planning to do. Otherwise when we call close on the interface it should see it is detached and not attempt to call the logic to down the interface and free the IRQs again. From what I can tell the check that was adding the check for __E1000_DOWN in e1000e_close was added when runtime power management was added. However it should not be relevant for us as we perform a call to pm_runtime_get_sync before we call e1000_down/free_irq so it should always be back up before we call into this anyway. Reported-by: Morumuri Srivalli <smorumu1@in.ibm.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Tested-by: David Dai <zdai@linux.vnet.ibm.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2019-10-29e1000e: Add support for Comet LakeSasha Neftin2-0/+12
Add devices ID's for the next LOM generations that will be available on the next Intel Client platform (Comet Lake) This patch provides the initial support for these devices Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-21e1000e: Add support for S0ixSasha Neftin2-0/+186
Implement flow for S0ix support. Modern SoCs support S0ix low power states during idle periods, which are sub-states of ACPI S0 that increase power saving while supporting an instant-on experience for providing lower latency that ACPI S0. The S0ix states shut off parts of the SoC when they are not in use, while still maintaning optimal performance. This patch add support for S0ix started from an Ice Lake platform. Suggested-by: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@linux.intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-23Merge tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-1/+0
Pull PCI updates from Bjorn Helgaas: "Enumeration: - Consolidate _HPP/_HPX stuff in pci-acpi.c and simplify it (Krzysztof Wilczynski) - Fix incorrect PCIe device types and remove dev->has_secondary_link to simplify code that deals with upstream/downstream ports (Mika Westerberg) - After suspend, restore Resizable BAR size bits correctly for 1MB BARs (Sumit Saxena) - Enable PCI_MSI_IRQ_DOMAIN support for RISC-V (Wesley Terpstra) Virtualization: - Add ACS quirks for iProc PAXB (Abhinav Ratna), Amazon Annapurna Labs (Ali Saidi) - Move sysfs SR-IOV functions to iov.c (Kelsey Skunberg) - Remove group write permissions from sysfs sriov_numvfs, sriov_drivers_autoprobe (Kelsey Skunberg) Hotplug: - Simplify pciehp indicator control (Denis Efremov) Peer-to-peer DMA: - Allow P2P DMA between root ports for whitelisted bridges (Logan Gunthorpe) - Whitelist some Intel host bridges for P2P DMA (Logan Gunthorpe) - DMA map P2P DMA requests that traverse host bridge (Logan Gunthorpe) Amazon Annapurna Labs host bridge driver: - Add DT binding and controller driver (Jonathan Chocron) Hyper-V host bridge driver: - Fix hv_pci_dev->pci_slot use-after-free (Dexuan Cui) - Fix PCI domain number collisions (Haiyang Zhang) - Use instance ID bytes 4 & 5 as PCI domain numbers (Haiyang Zhang) - Fix build errors on non-SYSFS config (Randy Dunlap) i.MX6 host bridge driver: - Limit DBI register length (Stefan Agner) Intel VMD host bridge driver: - Fix config addressing issues (Jon Derrick) Layerscape host bridge driver: - Add bar_fixed_64bit property to endpoint driver (Xiaowei Bao) - Add CONFIG_PCI_LAYERSCAPE_EP to build EP/RC drivers separately (Xiaowei Bao) Mediatek host bridge driver: - Add MT7629 controller support (Jianjun Wang) Mobiveil host bridge driver: - Fix CPU base address setup (Hou Zhiqiang) - Make "num-lanes" property optional (Hou Zhiqiang) Tegra host bridge driver: - Fix OF node reference leak (Nishka Dasgupta) - Disable MSI for root ports to work around design problem (Vidya Sagar) - Add Tegra194 DT binding and controller support (Vidya Sagar) - Add support for sideband pins and slot regulators (Vidya Sagar) - Add PIPE2UPHY support (Vidya Sagar) Misc: - Remove unused pci_block_cfg_access() et al (Kelsey Skunberg) - Unexport pci_bus_get(), etc (Kelsey Skunberg) - Hide PM, VC, link speed, ATS, ECRC, PTM constants and interfaces in the PCI core (Kelsey Skunberg) - Clean up sysfs DEVICE_ATTR() usage (Kelsey Skunberg) - Mark expected switch fall-through (Gustavo A. R. Silva) - Propagate errors for optional regulators and PHYs (Thierry Reding) - Fix kernel command line resource_alignment parameter issues (Logan Gunthorpe)" * tag 'pci-v5.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (112 commits) PCI: Add pci_irq_vector() and other stubs when !CONFIG_PCI arm64: tegra: Add PCIe slot supply information in p2972-0000 platform arm64: tegra: Add configuration for PCIe C5 sideband signals PCI: tegra: Add support to enable slot regulators PCI: tegra: Add support to configure sideband pins PCI: vmd: Fix shadow offsets to reflect spec changes PCI: vmd: Fix config addressing when using bus offsets PCI: dwc: Add validation that PCIe core is set to correct mode PCI: dwc: al: Add Amazon Annapurna Labs PCIe controller driver dt-bindings: PCI: Add Amazon's Annapurna Labs PCIe host bridge binding PCI: Add quirk to disable MSI-X support for Amazon's Annapurna Labs Root Port PCI/VPD: Prevent VPD access for Amazon's Annapurna Labs Root Port PCI: Add ACS quirk for Amazon Annapurna Labs root ports PCI: Add Amazon's Annapurna Labs vendor ID MAINTAINERS: Add PCI native host/endpoint controllers designated reviewer PCI: hv: Use bytes 4 and 5 from instance ID as the PCI domain numbers dt-bindings: PCI: tegra: Add PCIe slot supplies regulator entries dt-bindings: PCI: tegra: Add sideband pins configuration entries PCI: tegra: Add Tegra194 PCIe support PCI: Get rid of dev->has_secondary_link flag ...
2019-09-09e1000e: Make speed detection on hotplugging cable more reliableKai-Heng Feng1-6/+6
After hot plugging an 1Gbps Ethernet cable with 1Gbps link partner, the MII_BMSR may report 10Mbps, renders the network rather slow. The issue has much lower fail rate after commit 59653e6497d1 ("e1000e: Make watchdog use delayed work"), which essentially introduces some delay before running the watchdog task. But there's still a chance that the hot plugging event and the queued watchdog task gets run at the same time, then the original issue can be observed once again. So let's use mod_delayed_work() to add a deterministic 1 second delay before running watchdog task, after an interrupt. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-28PCI: Move ASPM declarations to linux/pci.hKrzysztof Wilczynski1-1/+0
Move ASPM definitions and function prototypes from include/linux/pci-aspm.h to include/linux/pci.h so users only need to include <linux/pci.h>: PCIE_LINK_STATE_L0S PCIE_LINK_STATE_L1 PCIE_LINK_STATE_CLKPM pci_disable_link_state() pci_disable_link_state_locked() pcie_no_aspm() No functional changes intended. Link: https://lore.kernel.org/r/20190827095620.11213-1-kw@linux.com Signed-off-by: Krzysztof Wilczynski <kw@linux.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-08-22ethernet: Delete unnecessary checks before the macro call “dev_kfree_skb”Markus Elfring1-4/+2
The dev_kfree_skb() function performs also input parameter validation. Thus the test around the shown calls is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-24e1000e: add workaround for possible stalled packetKai-Heng Feng2-1/+11
This works around a possible stalled packet issue, which may occur due to clock recovery from the PCH being too slow, when the LAN is transitioning from K1 at 1G link speed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204057 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-07-23e1000e: Use dev_get_drvdata where possibleChuhong Yuan1-4/+3
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22net: Use skb accessors in network driversMatthew Wilcox (Oracle)1-2/+1
In preparation for unifying the skb_frag and bio_vec, use the fine accessors which already exist and use skb_frag_t instead of struct skb_frag_struct. Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-28e1000e: PCIm function state supportVitaly Lifshits2-1/+20
Due to commit: 5d8682588605 ("[misc] mei: me: allow runtime pm for platform with D0i3") When disconnecting the cable and reconnecting it the NIC enters DMoff state. This caused wrong link indication and duplex mismatch. This bug is described in: https://bugzilla.redhat.com/show_bug.cgi?id=1689436 Checking PCIm function state and performing PHY reset after a timeout in watchdog task solves this issue. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Make watchdog use delayed workDetlev Casanova2-27/+32
Use delayed work instead of timers to run the watchdog of the e1000e driver. Simplify the code with one less middle function. Signed-off-by: Detlev Casanova <detlev.casanova@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Reduce boot time by tightening sleep rangesArjan van de Ven7-28/+28
The e1000e driver is a great user of the usleep_range() API, and has nice ranges that in principle help power management. However the ranges that are used only during system startup are very long (and can add easily 100 msec to the boot time) while the power savings of such long ranges is irrelevant due to the one-off, boot only, nature of these functions. This patch shrinks some of the longest ranges to be shorter (while still using a power friendly 1 msec range); this saves 100msec+ of boot time on my BDW NUCs Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-28e1000e: Increase pause and refresh timeMiguel Bernal Marin1-2/+2
Suggested-by: Tim Pepper <timothy.c.pepper@linux.intel.com> Signed-off-by: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-28e1000e: start network tx queue only when link is upKonstantin Khlebnikov1-2/+4
Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980bf5ee ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Tested-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-28Revert "e1000e: fix cyclic resets at link up with active tx"Konstantin Khlebnikov1-6/+9
This reverts commit 0f9e980bf5ee1a97e2e401c846b2af989eb21c61. That change cased false-positive warning about hardware hang: e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready e1000e 0000:00:1f.6 eth0: Detected Hardware Unit Hang: TDH <0> TDT <1> next_to_use <1> next_to_clean <0> buffer_info[next_to_clean]: time_stamp <fffba7a7> next_to_watch <0> jiffies <fffbb140> next_to_watch.status <0> MAC Status <40080080> PHY Status <7949> PHY 1000BASE-T Status <0> PHY Extended Status <3000> PCI Status <10> e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx Besides warning everything works fine. Original issue will be fixed property in following patch. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Reported-by: Joseph Yasi <joe.yasi@gmail.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=203175 Tested-by: Joseph Yasi <joe.yasi@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-3/+3
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-04-08drivers: Remove explicit invocations of mmiowb()Will Deacon1-7/+0
mmiowb() is now implied by spin_unlock() on architectures that require it, so there is no reason to call it from driver code. This patch was generated using coccinelle: @mmiowb@ @@ - mmiowb(); and invoked as: $ for d in drivers include/linux/qed sound; do \ spatch --include-headers --sp-file mmiowb.cocci --dir $d --in-place; done NOTE: mmiowb() has only ever guaranteed ordering in conjunction with spin_unlock(). However, pairing each mmiowb() removal in this patch with the corresponding call to spin_unlock() is not at all trivial, so there is a small chance that this change may regress any drivers incorrectly relying on mmiowb() to order MMIO writes between CPUs using lock-free synchronisation. If you've ended up bisecting to this commit, you can reintroduce the mmiowb() calls using wmb() instead, which should restore the old behaviour on all architectures other than some esoteric ia64 systems. Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2019-04-01net: move skb->xmit_more hint to softnet dataFlorian Westphal1-1/+1
There are two reasons for this. First, the xmit_more flag conceptually doesn't fit into the skb, as xmit_more is not a property related to the skb. Its only a hint to the driver that the stack is about to transmit another packet immediately. Second, it was only done this way to not have to pass another argument to ndo_start_xmit(). We can place xmit_more in the softnet data, next to the device recursion. The recursion counter is already written to on each transmit. The "more" indicator is placed right next to it. Drivers can use the netdev_xmit_more() helper instead of skb->xmit_more to check the "more packets coming" hint. skb->xmit_more is retained (but always 0) to not cause build breakage. This change takes care of the simple s/skb->xmit_more/netdev_xmit_more()/ conversions. Remaining drivers are converted in the next patches. Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19e1000e: Disable runtime PM on CNP+Kai-Heng Feng1-1/+1
There are some new e1000e devices can only be woken up from D3 one time, by plugging Ethernet cable. Subsequent cable plugging does set PME bit correctly, but it still doesn't get woken up. Since e1000e connects to the root complex directly, we rely on ACPI to wake it up. In this case, the GPE from _PRW only works once and stops working after that. Though it appears to be a platform bug, e1000e maintainers confirmed that I219 does not support D3. So disable runtime PM on CNP+ chips. We may need to disable earlier generations if this bug also hit older platforms. Bugzilla: https://bugzilla.kernel.org/attachment.cgi?id=280819 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-19intel: correct return from set features callbackSerhey Popovych1-1/+1
According to comments in <linux/netdevice.h> we should return either >0 or -errno from ->ndo_set_features() if changing dev->features by itself. Return 1 in such places to notify netdev_update_features() about applied changes in dev->features. Signed-off-by: Serhey Popovych <serhe.popovych@gmail.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-23e1000e: Fix -Wformat-truncation warningsFlorian Fainelli1-2/+2
Provide precision hints to snprintf() since we know the destination buffer size of the RX/TX ring names are IFNAMSIZ + 5 - 1. This fixes the following warnings: drivers/net/ethernet/intel/e1000e/netdev.c: In function 'e1000_request_msix': drivers/net/ethernet/intel/e1000e/netdev.c:2109:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-rx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2107:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->rx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->rx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-rx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/intel/e1000e/netdev.c:2125:13: warning: 'snprintf' output may be truncated before the last format character [-Wformat-truncation=] "%s-tx-0", netdev->name); ^ drivers/net/ethernet/intel/e1000e/netdev.c:2123:3: note: 'snprintf' output between 6 and 21 bytes into a destination of size 20 snprintf(adapter->tx_ring->name, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ sizeof(adapter->tx_ring->name) - 1, ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-tx-0", netdev->name); ~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-05e1000e: fix cyclic resets at link up with active txKonstantin Khlebnikov1-9/+6
I'm seeing series of e1000e resets (sometimes endless) at system boot if something generates tx traffic at this time. In my case this is netconsole who sends message "e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames" from e1000e itself. As result e1000_watchdog_task sees used tx buffer while carrier is off and start this reset cycle again. [ 17.794359] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 17.794714] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 22.936455] e1000e 0000:02:00.0 eth1: changing MTU from 1500 to 9000 [ 23.033336] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 26.102364] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 27.174495] 8021q: 802.1Q VLAN Support v1.8 [ 27.174513] 8021q: adding VLAN 0 to HW filter on device eth1 [ 30.671724] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [ 30.898564] netpoll: netconsole: local port 6666 [ 30.898566] netpoll: netconsole: local IPv6 address 2a02:6b8:0:80b:beae:c5ff:fe28:23f8 [ 30.898567] netpoll: netconsole: interface 'eth1' [ 30.898568] netpoll: netconsole: remote port 6666 [ 30.898568] netpoll: netconsole: remote IPv6 address 2a02:6b8:b000:605c:e61d:2dff:fe03:3790 [ 30.898569] netpoll: netconsole: remote ethernet address b0:a8:6e:f4:ff:c0 [ 30.917747] console [netcon0] enabled [ 30.917749] netconsole: network logging started [ 31.453353] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.185730] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.321840] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.465822] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.597423] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.745417] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 34.877356] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.005441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.157376] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.289362] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 35.417441] e1000e 0000:02:00.0: Some CPU C-states have been disabled in order to enable jumbo frames [ 37.790342] e1000e: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None This patch flushes tx buffers only once when carrier is off rather than at each watchdog iteration. Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05e1000e: fix a missing check for return valueJeff Kirsher1-10/+23
The change is based on the issue found by Kangjie Lu <kjlu@umn.edu> where we not checking the return value of a register read/write which could result in a NULL pointer dereference if the read/write fails. Since we are only trying to disable the far-end loopback, if the read and write of register fails, we do not want to bail out of the function. We just want to log that it failed to disable and continue on. CC: Sasha Neftin <sasha.neftin@intel.com> CC: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-05e1000e: Exclude device from suspend direct complete optimizationKai-Heng Feng1-0/+2
e1000e sets different WoL settings in system suspend callback and runtime suspend callback. The suspend direct complete optimization leaves e1000e in runtime suspended state with wrong WoL setting during system suspend. To fix this, we need to disable suspend direct complete optimization to let e1000e always use suspend callback to set correct WoL during system suspend. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-11-21ethernet/intel: consolidate NAPI and NAPI exitJesse Brandeburg1-8/+9
While reviewing code, I noticed that Eric Dumazet recommends that drivers check the return code of napi_complete_done, and use that to decide to enable interrupts or not when exiting poll. One of the Intel drivers was already fixed (ixgbe). Upon looking at the Intel drivers as a whole, we are handling our polling and NAPI exit in a few different ways based on whether we have multiqueue and whether we have Tx cleanup included. Several drivers had the bug of exiting NAPI with return 0, which appears to mess up the accounting in the stack. Consolidate all the NAPI routines to do best known way of exiting and to just mostly look like each other. 1) check return code of napi_complete_done to control interrupt enable 2) return the actual amount of work done. 3) return budget immediately if need NAPI poll again Tested the changes on e1000e with a high interrupt rate set, and it shows about an 8% reduction in the CPU utilization when busy polling because we aren't re-enabling interrupts when we're about to be polled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-09e1000e: extend PTP gettime function to read system clockMiroslav Lichvar3-16/+45
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-07e1000e: allow non-monotonic SYSTIM readingsMiroslav Lichvar1-3/+10
It seems with some NICs supported by the e1000e driver a SYSTIM reading may occasionally be few microseconds before the previous reading and if enabled also pass e1000e_sanitize_systim() without reaching the maximum number of rereads, even if the function is modified to check three consecutive readings (i.e. it doesn't look like a double read error). This causes an underflow in the timecounter and the PHC time jumps hours ahead. This was observed on 82574, I217 and I219. The fastest way to reproduce it is to run a program that continuously calls the PTP_SYS_OFFSET ioctl on the PHC. Modify e1000e_phc_gettime() to use timecounter_cyc2time() instead of timecounter_read() in order to allow non-monotonic SYSTIM readings and prevent the PHC from jumping. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-25Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-2/+0
Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep1-2/+0
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-18intel-ethernet: use correct module licenseJesse Brandeburg1-1/+1
We recently updated all our SPDX identifiers to correctly indicate our net/ethernet/intel/* drivers were always released and intended to be released under GPL v2, but the MODULE_LICENSE declaration was never updated. Fix the MODULE_LICENSE to be GPL v2, for all our drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-12treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+2
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04e1000e: Ignore TSYNCRXCTL when getting I219 clock attributesBenjamin Poirier1-9/+6
There have been multiple reports of crashes that look like kernel: RIP: 0010:[<ffffffff8110303f>] timecounter_read+0xf/0x50 [...] kernel: Call Trace: kernel: [<ffffffffa0806b0f>] e1000e_phc_gettime+0x2f/0x60 [e1000e] kernel: [<ffffffffa0806c5d>] e1000e_systim_overflow_work+0x1d/0x80 [e1000e] kernel: [<ffffffff810992c5>] process_one_work+0x155/0x440 kernel: [<ffffffff81099e16>] worker_thread+0x116/0x4b0 kernel: [<ffffffff8109f422>] kthread+0xd2/0xf0 kernel: [<ffffffff8163184f>] ret_from_fork+0x3f/0x70 These can be traced back to the fact that e1000e_systim_reset() skips the timecounter_init() call if e1000e_get_base_timinca() returns -EINVAL, which leads to a null deref in timecounter_read(). Commit 83129b37ef35 ("e1000e: fix systim issues", v4.2-rc1) reworked e1000e_get_base_timinca() in such a way that it can return -EINVAL for e1000_pch_spt if the SYSCFI bit is not set in TSYNCRXCTL. Some experimentation has shown that on I219 (e1000_pch_spt, "MAC: 12") adapters, the E1000_TSYNCRXCTL_SYSCFI flag is unstable; TSYNCRXCTL reads sometimes don't have the SYSCFI bit set. Retrying the read shortly after finds the bit to be set. This was observed at boot (probe) but also link up and link down. Moreover, the phc (PTP Hardware Clock) seems to operate normally even after reads where SYSCFI=0. Therefore, remove this register read and unconditionally set the clock parameters. Reported-by: Achim Mildenberger <admin@fph.physik.uni-karlsruhe.de> Message-Id: <20180425065243.g5mqewg5irkwgwgv@f2> Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1075876 Fixes: 83129b37ef35 ("e1000e: fix systim issues") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher23-466/+23
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher23-0/+23
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12e1000e: Fix link check race conditionBenjamin Poirier2-21/+24
Alex reported the following race condition: /* link goes up... interrupt... schedule watchdog */ \ e1000_watchdog_task \ e1000e_has_link \ hw->mac.ops.check_for_link() === e1000e_check_for_copper_link \ e1000e_phy_has_link_generic(..., &link) link = true /* link goes down... interrupt */ \ e1000_msix_other hw->mac.get_link_status = true /* link is up */ mac->get_link_status = false link_active = true /* link_active is true, wrongly, and stays so because * get_link_status is false */ Avoid this problem by making sure that we don't set get_link_status = false after having checked the link. It seems this problem has been present since the introduction of e1000e. Link: https://lkml.org/lkml/2018/1/29/338 Reported-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-12Revert "e1000e: Separate signaling for link check/link up"Benjamin Poirier3-19/+9
This reverts commit 19110cfbb34d4af0cdfe14cd243f3b09dc95b013. This reverts commit 4110e02eb45ea447ec6f5459c9934de0a273fb91. This reverts commit d3604515c9eda464a92e8e67aae82dfe07fe3c98. Commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") changed what happens to the link status when there is an error which happens after "get_link_status = false" in the copper check_for_link callbacks. Previously, such an error would be ignored and the link considered up. After that commit, any error implies that the link is down. Revert commit 19110cfbb34d ("e1000e: Separate signaling for link check/link up") and its followups. After reverting, the race condition described in the log of commit 19110cfbb34d is reintroduced. It may still be triggered by LSC events but this should keep the link down in case the link is electrically unstable, as discussed. The race may no longer be triggered by RXO events because commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") restored reading icr in the Other handler. Link: https://lkml.org/lkml/2018/3/1/789 Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: allocate ring descriptors with dma_zalloc_coherentPierre-Yves Kerbrat1-2/+2
Descriptor rings were not initialized at zero when allocated When area contained garbage data, it caused skb_over_panic in e1000_clean_rx_irq (if data had E1000_RXD_STAT_DD bit set) This patch makes use of dma_zalloc_coherent to make sure the ring is memset at 0 to prevent the area from containing garbage. Following is the signature of the panic: IODDR0@0.0: skbuff: skb_over_panic: text:80407b20 len:64010 put:64010 head:ab46d800 data:ab46d842 tail:0xab47d24c end:0xab46df40 dev:eth0 IODDR0@0.0: BUG: failure at net/core/skbuff.c:105/skb_panic()! IODDR0@0.0: Kernel panic - not syncing: BUG! IODDR0@0.0: IODDR0@0.0: Process swapper/0 (pid: 0, threadinfo=81728000, task=8173cc00 ,cpu: 0) IODDR0@0.0: SP = <815a1c0c> IODDR0@0.0: Stack: 00000001 IODDR0@0.0: b2d89800 815e33ac IODDR0@0.0: ea73c040 00000001 IODDR0@0.0: 60040003 0000fa0a IODDR0@0.0: 00000002 IODDR0@0.0: IODDR0@0.0: 804540c0 815a1c70 IODDR0@0.0: b2744000 602ac070 IODDR0@0.0: 815a1c44 b2d89800 IODDR0@0.0: 8173cc00 815a1c08 IODDR0@0.0: IODDR0@0.0: 00000006 IODDR0@0.0: 815a1b50 00000000 IODDR0@0.0: 80079434 00000001 IODDR0@0.0: ab46df40 b2744000 IODDR0@0.0: b2d89800 IODDR0@0.0: IODDR0@0.0: 0000fa0a 8045745c IODDR0@0.0: 815a1c88 0000fa0a IODDR0@0.0: 80407b20 b2789f80 IODDR0@0.0: 00000005 80407b20 IODDR0@0.0: IODDR0@0.0: IODDR0@0.0: Call Trace: IODDR0@0.0: [<804540bc>] skb_panic+0xa4/0xa8 IODDR0@0.0: [<80079430>] console_unlock+0x2f8/0x6d0 IODDR0@0.0: [<80457458>] skb_put+0xa0/0xc0 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<804079c8>] e1000_clean_rx_irq+0x188/0x3e8 IODDR0@0.0: [<80407b1c>] e1000_clean_rx_irq+0x2dc/0x3e8 IODDR0@0.0: [<80468b48>] __dev_kfree_skb_any+0x88/0xa8 IODDR0@0.0: [<804101ac>] e1000e_poll+0x94/0x288 IODDR0@0.0: [<8046e9d4>] net_rx_action+0x19c/0x4e8 IODDR0@0.0: ... IODDR0@0.0: Maximum depth to print reached. Use kstack=<maximum_depth_to_print> To specify a custom value (where 0 means to display the full backtrace) IODDR0@0.0: ---[ end Kernel panic - not syncing: BUG! Signed-off-by: Pierre-Yves Kerbrat <pkerbrat@kalray.eu> Signed-off-by: Marius Gligor <mgligor@kalray.eu> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Fix check_for_link return value with autoneg offBenjamin Poirier2-2/+2
When autoneg is off, the .check_for_link callback functions clear the get_link_status flag and systematically return a "pseudo-error". This means that the link is not detected as up until the next execution of the e1000_watchdog_task() 2 seconds later. Fixes: 19110cfbb34d ("e1000e: Separate signaling for link check/link up") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Avoid missed interrupts following ICR readBenjamin Poirier2-8/+24
The 82574 specification update errata 12 states that interrupts may be missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by setting all bits related to events that can trigger the Other interrupt in IMS. The Other interrupt is raised for such events regardless of whether or not they are set in IMS. However, only when they are set is the INT_ASSERTED bit also set in ICR. By doing this, we ensure that INT_ASSERTED is always set when we read ICR in e1000_msix_other() and steer clear of the errata. This also ensures that ICR will automatically be cleared on read, therefore we no longer need to clear bits explicitly. Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Fix queue interrupt re-raising in Other interruptBenjamin Poirier1-0/+3
Restores the ICS write for Rx/Tx queue interrupts which was present before commit 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1) but was not restored in commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). This re-raises the queue interrupts in case the txq or rxq bits were set in ICR and the Other interrupt handler read and cleared ICR before the queue interrupt was raised. Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05Partial revert "e1000e: Avoid receiver overrun interrupt bursts"Benjamin Poirier1-14/+2
This partially reverts commit 4aea7a5c5e940c1723add439f4088844cd26196d. We keep the fix for the first part of the problem (1) described in the log of that commit, that is to read ICR in the other interrupt handler. We remove the fix for the second part of the problem (2), Other interrupt throttling. Bursts of "Other" interrupts may once again occur during rxo (receive overflow) traffic conditions. This is deemed acceptable in the interest of avoiding unforeseen fallout from changes that are not strictly necessary. As discussed, the e1000e driver should be in "maintenance mode". Link: https://www.spinics.net/lists/netdev/msg480675.html Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-05e1000e: Remove Other from EIACBenjamin Poirier1-2/+3
It was reported that emulated e1000e devices in vmware esxi 6.5 Build 7526125 do not link up after commit 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1). Some tracing shows that after e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other() on emulated e1000e devices. In comparison, on real e1000e 82574 hardware, icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation. Some experimentation showed that this flaw in vmware e1000e emulation can be worked around by not setting Other in EIAC. This is how it was before 16ecba59bc33 ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1). Fixes: 4aea7a5c5e94 ("e1000e: Avoid receiver overrun interrupt bursts") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-24e1000e: Alert the user that C-states will be disabled by enabling jumbo framesMatt Turner1-0/+2
I personally spent a long time trying to decypher why my CPU would not reach deeper C-states. Let's just tell the next user what's going on. Signed-off-by: Matt Turner <matt.turner@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.