aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/fm10k/fm10k_type.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-20fm10k: implement request_lport_map pointerJacob Keller1-0/+1
If the fm10k interface is brought up, but the switch manager software is not running, the driver will continuously request the lport map every few seconds in the base driver watchdog routine. Eventually after several minutes the switch mailbox Tx fifo will fill up and the mailbox will timeout, resulting in a reset. This reset will appear as if for no reason, and occurs regularly every few minutes until the switch manager software is loaded. Prevent this from happening by only requesting the lport map after we've verified the switch mailbox is tx_ready. In order to simplify code logic and reduce code duplication, implement this as a new function pointer "mac.ops.request_lport_map" which the VF will not implement. Otherwise, we have to duplicate the tx_ready check outside of fm10k_get_host_state_generic, or re-implement most of fm10k_get_host_state_generic in the pf version. The resulting code is simpler and easier to understand, and prevents the PF from continuously requesting lport map and filling the Tx fifo of a switch mailbox that isn't ready. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-20fm10k: don't stop reset due to FM10K_ERR_REQUESTS_PENDINGJacob Keller1-0/+1
Don't report FM10K_ERR_REQUESTS_PENDING when we fail to disable queues within the timeout. This can occur due to a hardware Tx hang, or when the switch ethernet fabric is resetting while we are transmitting traffic. It can sometimes take up to 500ms before the Tx DMA engine gives up. Instead, just skip the DMA engine check and perform a data-path reset anyways. Add a statistic counter to keep track of the number of resets occurring while we have pending DMA on the rings. In order to prevent having to re-assign err to 0, re-order the last few items of the reset_hw_pf function so that we don't perform "return err" at the end. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: consistently use Intel(R) for driver namesJacob Keller1-1/+1
Update every header file and other locations to consistently use Intel(R) instead of just Intel. Also update copyright year of files which we modified. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: use different name than FM10K_VLAN_CLEAR for override bitJacob Keller1-0/+1
Use a new #define FM10K_VLAN_OVERRIDE even though we're using the exact same bit. The reason for this is clarity in the code, otherwise you can read FM10K_VLAN_CLEAR and think it should be removed. Also add a comment explaining why the FM10K_VLAN_OVERRIDE bit is set. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: drop 1588 supportJacob Keller1-16/+1
The 1588 support within fm10k does not work correctly with the current version of the switch management software, and likely never worked correctly to begin with. Remove support for PTP/1588. Update copyright year for all these files while we're touching them. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-05fm10k: cleanup remaining right-bit-shifted 1Bruce Allan1-4/+4
Use BIT() macro instead. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-22fm10k: remove unused struct elementBruce Allan1-1/+0
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-22fm10k: constify fm10k_mac_ops, fm10k_iov_ops and fm10k_info structuresBruce Allan1-4/+4
These structures never change so declare them as const. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: use BIT() macro instead of open-coded bit-shiftingBruce Allan1-1/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: do not use CamelCaseJacob Keller1-7/+7
Avoid the use of CamelCase for some variable names that previously slipped through review. Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-05fm10k: Add support for ITR scaling based on PCIe link speedJacob Keller1-1/+16
The Intel Ethernet Switch FM10000 Host Interface interrupt throttle timers are based on the PCIe link speed. Because of this, the value being programmed into the ITR registers must be scaled accordingly. For the PF, this is as simple as reading the PCIe link speed and storing the result. However, in the case of SR-IOV, the VF's interrupt throttle timers are based on the link speed of the PF. However, the VF is unable to get the link speed information from its configuration space, so the PF must inform it of what scale to use. Rather than pass this scale via mailbox message, take advantage of unused bits in the TDLEN register to pass the scale. It is the responsibility of the PF to program this for the VF while setting up the VF queues and the responsibility of the VF to get the information accordingly. This is preferable because it allows the VF to set up the interrupts properly during initialization and matches how the MAC address is passed in the TDBAL/TDBAH registers. Since we're modifying fm10k_type.h, we may as well also update the copyright year. Reported-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23fm10k: do not assume VF always has 1 queueJacob Keller1-0/+1
It is possible that the PF has not yet assigned resources to the VF. Although rare, this could result in the VF attempting to read queues it does not own and result in FUM or THI faults in the PF. To prevent this, check queue 0 before we continue in init_hw_vf. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-22fm10k: add support for extra debug statisticsJacob Keller1-0/+6
Add a private ethtool flag to enable display of these statistics, which are generally less useful. However, sometimes it can be useful for debugging purposes. The most useful portion is the ability to see what the PF thinks the VF mailboxes look like. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-15fm10k: remove is_slot_appropriateJacob Keller1-1/+0
This function is no longer used now that we have updated fm10k_slot_warn functionality. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-17fm10k: fix incorrect DIR_NEVATIVE bit in 1588 codeJacob Keller1-1/+1
The SYSTIME_CFG.Adjust Direction bit is actually supposed to indicate that the adjustment is positive. Fix the code to align correctly with hardware and documentation. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-03fm10k: Resolve various spelling errors and checkpatch warningsMatthew Vick1-1/+1
Fix a few silly typos in the code and checkpatch warnings in support of general code cleanliness. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-03fm10k: Modify tunnel length header check when offloadingMatthew Vick1-0/+3
The FM10000 host interface can only support up to 184 bytes when performing tunnel offloads. Because of this, a check was added to prevent the driver from attempting to feed a header to the hardware too big for it to parse. Make this check a little more robust by calculating the inner L4 header length based on whether it is TCP or UDP. Cc: Joe Stringer <joestringer@nicira.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-22fm10k: Increase the timeout for the data path resetMatthew Vick1-1/+1
Based on feedback from the hardware team, 100us is too short of a time to wait for the data path reset to complete and the recommendation is to increase this timeout to 150us. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for ptp to hw specific filesAlexander Duyck1-0/+14
This change adds the messaging support needed to support PTP. In the case of Tx timestamps it is necessary for the Switch Management entity to return the frames via the mailbox as the host interface cannot know which port the timestamp will be delivered to. In addition there is only one clock on the entire switch, as such the entity that has BAR 4 access is the only one who can actually update the frequency as it is the only one with access. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for SR-IOV to PF core filesAlexander Duyck1-0/+58
This change adds a set of functions to fm10k_pf.c which allows for configuring the VF via a set of standardized TLV messages. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for VFAlexander Duyck1-0/+9
This patch provides the functions necessary to configure the VF making use of the same API pointers as the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for mailboxAlexander Duyck1-0/+3
This patch adds generic mailbox support. The general idea of the mailboxes is to use a pair of ring buffers, one for request, one for response to send data between the local driver and some remote entity be it the PF of the Switch Manager. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add register defines and basic structuresAlexander Duyck1-0/+659
This patch adds the basic defines and structures needed by the PF for operation. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add skeletal frame for Intel(R) FM10000 Ethernet Switch Host Interface DriverAlexander Duyck1-0/+27
This patch adds the beginning framework onto which I am going to add the fm10k driver which supports the Intel(R) FM10000 Ethernet Switch Host Interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.