aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/fm10k/fm10k_vf.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-07-20fm10k: don't stop reset due to FM10K_ERR_REQUESTS_PENDINGJacob Keller1-5/+7
Don't report FM10K_ERR_REQUESTS_PENDING when we fail to disable queues within the timeout. This can occur due to a hardware Tx hang, or when the switch ethernet fabric is resetting while we are transmitting traffic. It can sometimes take up to 500ms before the Tx DMA engine gives up. Instead, just skip the DMA engine check and perform a data-path reset anyways. Add a statistic counter to keep track of the number of resets occurring while we have pending DMA on the rings. In order to prevent having to re-assign err to 0, re-order the last few items of the reset_hw_pf function so that we don't perform "return err" at the end. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: consistently use Intel(R) for driver namesJacob Keller1-1/+1
Update every header file and other locations to consistently use Intel(R) instead of just Intel. Also update copyright year of files which we modified. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: update comment regarding reserved bits checkJacob Keller1-1/+1
The original comment may be read incorrectly as referring to checking the *entire* length is zero. However, it merely checks only the reserved bits of both length and reserved in a small amount of code. Update the comment to indicate this is a clever trick and clearly spell out that it only checks the reserve bits. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: use different name than FM10K_VLAN_CLEAR for override bitJacob Keller1-1/+1
Use a new #define FM10K_VLAN_OVERRIDE even though we're using the exact same bit. The reason for this is clarity in the code, otherwise you can read FM10K_VLAN_CLEAR and think it should be removed. Also add a comment explaining why the FM10K_VLAN_OVERRIDE bit is set. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-20fm10k: drop 1588 supportJacob Keller1-56/+1
The 1588 support within fm10k does not work correctly with the current version of the switch management software, and likely never worked correctly to begin with. Remove support for PTP/1588. Update copyright year for all these files while we're touching them. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-22fm10k: constify fm10k_mac_ops, fm10k_iov_ops and fm10k_info structuresBruce Allan1-2/+2
These structures never change so declare them as const. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-22fm10k: address operator not needed when declaring function pointersBruce Allan1-19/+19
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-22fm10k: use ether_addr_equal instead of memcmpJacob Keller1-1/+1
When comparing MAC addresses, use ether_addr_equal instead of memcmp to ETH_ALEN length. Found and replaced using the following sed: sed -e 's/memcmp\x28\(.*\), ETH_ALEN\x29/!ether_addr_equal\x28\1\x29/' Reported-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-13fm10k: whitespace cleanupsBruce Allan1-0/+1
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-05fm10k: Add support for ITR scaling based on PCIe link speedJacob Keller1-2/+18
The Intel Ethernet Switch FM10000 Host Interface interrupt throttle timers are based on the PCIe link speed. Because of this, the value being programmed into the ITR registers must be scaled accordingly. For the PF, this is as simple as reading the PCIe link speed and storing the result. However, in the case of SR-IOV, the VF's interrupt throttle timers are based on the link speed of the PF. However, the VF is unable to get the link speed information from its configuration space, so the PF must inform it of what scale to use. Rather than pass this scale via mailbox message, take advantage of unused bits in the TDLEN register to pass the scale. It is the responsibility of the PF to program this for the VF while setting up the VF queues and the responsibility of the VF to get the information accordingly. This is preferable because it allows the VF to set up the interrupts properly during initialization and matches how the MAC address is passed in the TDBAL/TDBAH registers. Since we're modifying fm10k_type.h, we may as well also update the copyright year. Reported-by: Matthew Vick <matthew.vick@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-05fm10k: reset max_queues on init_hw_vf failureJacob Keller1-3/+10
VF drivers must detect how many queues are available. Previously, the driver assumed that each VF has at minimum 1 queue. This assumption is incorrect, since it is possible that the PF has not yet assigned the queues to the VF by the time the VF checks. To resolve this, we added a check first to ensure that the first queue is infact owned by the VF at init_hw_vf time. However, the code flow did not reset hw->mac.max_queues to 0. In some cases, such as during reinit flows, we call init_hw_vf without clearing the previous value of hw->mac.max_queues. Due to this, when init_hw_vf errors out, if its error code is not properly handled the VF driver may still believe it has queues which no longer belong to it. Fix this by clearing the hw->mac.max_queues on exit due to errors. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-11-23fm10k: do not assume VF always has 1 queueJacob Keller1-1/+6
It is possible that the PF has not yet assigned resources to the VF. Although rare, this could result in the VF attempting to read queues it does not own and result in FUM or THI faults in the PF. To prevent this, check queue 0 before we continue in init_hw_vf. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-15fm10k: remove is_slot_appropriateJacob Keller1-14/+0
This function is no longer used now that we have updated fm10k_slot_warn functionality. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-04-14fm10k: Have the VF get the default VLAN during initJeff Kirsher1-1/+5
Currently, the VFs do not read the default VLAN during initialization, so they will not be able to indicate untagged frames properly. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-03fm10k: Resolve various spelling errors and checkpatch warningsMatthew Vick1-7/+7
Fix a few silly typos in the code and checkpatch warnings in support of general code cleanliness. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for ptp to hw specific filesAlexander Duyck1-0/+55
This change adds the messaging support needed to support PTP. In the case of Tx timestamps it is necessary for the Switch Management entity to return the frames via the mailbox as the host interface cannot know which port the timestamp will be delivered to. In addition there is only one clock on the entire switch, as such the entity that has BAR 4 access is the only one who can actually update the frequency as it is the only one with access. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-09-23fm10k: Add support for VFAlexander Duyck1-0/+523
This patch provides the functions necessary to configure the VF making use of the same API pointers as the PF. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.