aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e/i40e_adminq_cmd.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+2
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08igb/igc: use ktime accessors for skb->tstampJacob Keller1-0/+2
When implementing launch time support in the igb and igc drivers, the skb->tstamp value is assumed to be a s64, but it's declared as a ktime_t value. Although ktime_t is typedef'd to s64 it wasn't always, and the kernel provides accessors for ktime_t values. Use the ktime_to_timespec64 and ktime_set accessors instead of directly assuming that the variable is always an s64. This improves portability if the code is ever moved to another kernel version, or if the definition of ktime_t ever changes again in the future. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Extend PHY access with page change flagPiotr Azarewicz1-1/+7
Currently FW use MDIO I/F number corresponded with current PF for PHY access. This code allow to specify used MDIO I/F number. Add new field - command flags with only one flag for now. Added flag tells FW that it shouldn't change page while accessing QSFP module, as it was set manually. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: mark additional missing bits as reservedJacob Keller1-0/+3
Mark bits 0xD through 0xF for the command flags of a cloud filter as reserved. These bits are not yet defined and are considered as reserved in the data sheet. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-09-11i40e: remove I40E_AQC_ADD_CLOUD_FILTER_OIPJacob Keller1-1/+1
The bit 0x0001 used in the cloud filters adminq command is reserved, and is not actually a valid type. The Linux driver has never used this type, and it's not clear if any driver ever has. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-22i40e: Update FW API version to 1.9Piotr Azarewicz1-2/+2
Upcoming FW increment API version to 1.9 due to Extend PHY access AQ command support. SW is ready for that support as well. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-22i40e: Add drop mode parameter to set mac configSylwia Wnuczko1-14/+15
This patch adds "drop mode" parameter to set mac config AQ command. This bit controls the behavior when a no-drop packet is blocking a TC queue. 0 – The PF driver is notified. 1 – The blocking packet is dropped and then the PF driver is notified. Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04i40e: Add support for X710 B/P & SFP+ cardsAleksandr Loktionov1-1/+11
New device ids are created to support X710 backplane and SFP+ cards. This patch adds in i40e driver support for 2.5GbaseT and 5GbaseT speed. It's implemented by checking I40E_CAP_PHY_TYPE_2_5GBASE_T, I40E_CAP_PHY_TYPE_5GBASE_T bits from f/w and setting corresponding bits in ethtool link ksettings supported and advertising masks. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03i40e: Further implementation of LLDPAleksandr Loktionov1-4/+16
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-16i40e: Changed maximum supported FW API version to 1.8Adam Ludkiewicz1-2/+2
A new FW has been released, which uses API version 1.8. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Add capability flag for stopping FW LLDPKrzysztof Galazka1-1/+3
Add HW capability flag to indicate that firmware supports stopping LLDP agent. This feature has been added in FW API 1.7 for XL710 devices and 1.6 for X722. Also raise expected minor version number for X722 FW API to 6. Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: Add AQ command for rearrange NVM structurePiotr Azarewicz1-0/+2
During switching between old NVM structure approach (called structured NVM) to new one (called flat NVM) or backward flash needs to be rearranged to required NVM structure. This is a part of transition from one NVM structure to another. The function is introduced to command firmware to start rearrangement process. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-26i40e: link_down_on_close private flag supportMariusz Stachura1-0/+37
This patch introduces new ethtool private flag used for forcing true link state. Function i40e_force_link_state that implements this functionality was added, it sets phy_type = 0 in order to work-around firmware's LESM. False positive error messages were suppressed. The ndo_open() should not succeed if there were issues with forcing link state to be UP. Added I40E_PHY_TYPES_BITMASK define with all phy types OR-ed together in one bitmask. Added after phy type definition, so it will be hard to forget to include new phy types to the bitmask. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26i40e: Display LLDP information on vSphere Web ClientUpasana Menon1-0/+12
This patch enables driver to display LLDP information on the vSphere Web Client with Intel adapters (X710, XL710) and Distributed Virtual Switch. Signed-off-by: Upasana Menon <upasana.menon@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags for NVM updatePawel Jablonski1-2/+6
This patch adds new I40E_NVMUPD_GET_AQ_EVENT state to allow retrieval of AdminQ events as a result of AdminQ commands sent to firmware. Add preservation flags support on X722 devices for NVM update AdminQ function wrapper. Add new parameter and handling to nvmupdate admin queue function intended to allow nvmupdate tool to configure the preservation flags in the AdminQ command. This is required to implement FlatNVM on X722 devices. Signed-off-by: Pawel Jablonski <pawel.jablonski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-10i40e: change ppp name to ddpJingjing Wu1-5/+5
PPP name was going to be confusing since PPP already means point to point protocol. It is decided to change pipeline personalization profile(ppp) to dynamic device personalization(ddp). Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-31i40e: Enable cloud filters via tc-flowerAmritha Nambiar1-0/+3
This patch enables tc-flower based hardware offloads. tc flower filter provided by the kernel is configured as driver specific cloud filter. The patch implements functions and admin queue commands needed to support cloud filters in the driver and adds cloud filters to configure these tc-flower filters. The classification function of the filter is to direct matched packets to a traffic class. The hardware traffic class is set based on the the classid reserved in the range :ffe0 - :ffef. Match Dst MAC and route to TC0: prio 1 flower dst_mac 3c:fd:fe:a0:d6:70 skip_sw\ hw_tc 1 Match Dst IPv4,Dst Port and route to TC1: prio 2 flower dst_ip 192.168.3.5/32\ ip_proto udp dst_port 25 skip_sw\ hw_tc 2 Match Dst IPv6,Dst Port and route to TC1: prio 3 flower dst_ip fe8::200:1\ ip_proto udp dst_port 66 skip_sw\ hw_tc 2 Delete tc flower filter: Example: Flow Director Sideband is disabled while configuring cloud filters via tc-flower and until any cloud filter exists. Unsupported matches when cloud filters are added using enhanced big buffer cloud filter mode of underlying switch include: 1. source port and source IP 2. Combined MAC address and IP fields. 3. Not specifying L4 port These filter matches can however be used to redirect traffic to the main VSI (tc 0) which does not require the enhanced big buffer cloud filter support. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-31i40e: Admin queue definitions for cloud filtersAmritha Nambiar1-2/+105
Add new admin queue definitions and extended fields for cloud filter support. Define big buffer for extended general fields in Add/Remove Cloud filters command. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-31i40e: Cloud filter mode for set_switch_config commandAmritha Nambiar1-1/+29
Add definitions for L4 filters and switch modes based on cloud filters modes and extend the set switch config command to include the additional cloud filter mode. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-17i40e: Add new PHY types for 25G AOC and ACC supportSudheer Mogilappagari1-0/+4
This patch adds support for 25G Active Optical Cables (AOC) and Active Copper Cables (ACC) PHY types. Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Krzysztof Malek <krzysztof.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06i40e: Display error message if module does not meet thermal requirementsFilip Sadowski1-0/+1
This patch causes error message to be displayed when NIC detects insertion of module that does not meet thermal requirements. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-06i40e: redfine I40E_PHY_TYPE_MAXMitch Williams1-1/+1
Since I40E_PHY_TYPE_MAX is used as an iterator, usually combined with some sort of bit-shifting, it should only include actual PHY types and not error cases. Move it up in the enum declaration so that loops only iterate across valid PHY types. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Stop dropping 802.1ad tags - eth proto 0x88a8Scott Peterson1-1/+16
Enable i40e to pass traffic with VLAN tags using the 802.1ad ethernet protocol ID (0x88a8). This requires NIC firmware providing version 1.7 of the API. With older NIC firmware 802.1ad tagged packets will continue to be dropped. No VLAN offloads nor RSS are supported for 802.1ad VLANs. Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Add support for 'ethtool -m'Filip Sadowski1-0/+18
This patch adds support for 'ethtool -m' command which displays information about (Q)SFP+ module plugged into NIC's cage. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Fix reporting of supported link modesFilip Sadowski1-2/+18
This patch fixes incorrect reporting of supported link modes on some NICs. Signed-off-by: Filip Sadowski <filip.sadowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-09-29i40e: refactor FW version checkingMitch Williams1-1/+9
The i40e driver now supports two different devices with two different firmware versions. So be smart about how we handle these. Move the FW version macros to the appropriate header file, and add a convenience macro that checks the version based on the device. Then use this macro to check whether or not the driver can use the new link info API. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-06-20i40e/i40evf: update WOL and I40E_AQC_ADDR_VALID_MASK flagsAlice Michael1-2/+2
Update a few flags related to FW interactions. Copyright updated to 2017. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-19i40e: new AQ commandsJingjing Wu1-0/+34
Add admin queue functions for Pipeline Personalization Profile AQ commands: - Write Recipe Command buffer (Opcode: 0x0270) - Get Applied Profiles list (Opcode: 0x0271) Change-ID: I558b4145364140f624013af48d4bbf79d21ebb0d Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-03-14i40e: fix up recent proxy and wol bits for X722_SUPPORTShannon Nelson1-1/+64
Some opcodes added & reordered to be in numerical order with the rest of the opcodes. This patch adds admin queue structs to support Wake on LAN feature for X722. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-02-18i40e: enable mc magic pkt wakeup during power downJoshua Hay1-0/+2
This patch adds a call to the mac_address_write admin q function during power down to update the PRTPM_SAH/SAL registers with the MC_MAG_EN bit thus enabling multicast magic packet wakeup. A FW workaround is needed to write the multicast magic wake up enable bit in the PRTPM_SAH register. The FW expects the mac address write admin q cmd to be called first with one of the WRITE_TYPE_LAA flags and then with the multicast relevant flags. *Note: This solution only works for X722 devices currently. A PFR will clear the previously mentioned bit by default, but X722 has support for a WOL_PRESERVE_ON_PFR flag which prevents the bit from being cleared. Once other devices support this flag, this solution should work as well. Change-ID: I51bd5b8535bd9051c2676e27c999c1657f786827 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Add FEC for 25gCarolyn Wyborny1-2/+23
This patch adds adminq support for Forward Error Correction ("FEC")for 25g products. Change-ID: Iaff4910737c239d2c730e5c22a313ce9c37d3964 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jacek Naczyk <jacek.naczyk@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-12-06i40e: Add support for 25G devicesCarolyn Wyborny1-3/+27
Add support for 25G devices - defines and data structures. One tricky part here is that the firmware support for these Devices introduces a mismatch between the PHY type enum and the bitfields for the phy types. This change creates a macro and uses it to increment the 25G PHY values when creating 25G bitfields. Change-ID: I69b24d837d44cf9220bf5cb8dd46c5be89ce490b Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Add support for HMC resource and profile for X722Carolyn Wyborny1-0/+21
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Fix byte ordering in ARP NS code for X722Carolyn Wyborny1-17/+21
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-13i40e: Add support for disabling all link and change bits needed for PHY interactionsKevin Scott1-0/+3
Add flag to tell firmware to disable link on all ports. This patch changes the bits set for telling firmware the PHY needs to be modified by driver. Without this patch, the setting will only set that mode for the current port on the device. Because the MDIO interface is common for the copper device. The command needs to set the mode for all ports. Change-ID: I8baa7da91d384291ac95b41ae1a516604f8eb67f Signed-off-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: make use of BIT() macro to prevent left shift of signed valuesJacob Keller1-28/+25
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e: Remove HMC AQ API implementationNeerav Parikh1-25/+0
Remove the code that implements the HMC AQ APIs and call these APIs. This is done because these are obsolete APIs and are not supported by firmware. Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-27i40e: Add device capability which defines if update is availableMichal Kosiarz1-0/+1
Add device capability which defines if update is available and security check is needed during update process. Change-ID: I380787c878275e1df18b39198df3ee3666342282 Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-18i40e: add adminq commands for Rx CTL registersShannon Nelson1-0/+16
Add the new opcodes and struct used for asking the firmware to update Rx control registers that need extra care when being accessed while under heavy traffic - e.g. sustained 64byte packets at line rate on all ports. The firmware will take extra steps to be sure the register accesses are successful. The registers involved are: PFQF_CTL_0 PFQF_HENA PFQF_FDALLOC PFQF_HREGION PFLAN_QALLOC VPQF_CTL VFQF_HENA VFQF_HREGION VSIQF_CTL VSILAN_QBASE VSILAN_QTABLE VSIQF_TCREGION PFQF_HKEY VFQF_HKEY PRTQF_CTL_0 GLFCOE_RCTL GLFCOE_RSOF GLQF_CTL GLQF_SWAP GLQF_HASH_MSK GLQF_HASH_INSET GLQF_HSYM GLQF_FC_MSK GLQF_FC_INSET GLQF_FD_MSK PRTQF_FD_INSET PRTQF_FD_FLXINSET PRTQF_FD_MSK Change-ID: I56c8144000da66ad99f68948d8a184b2ec2aeb3e Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-17i40e: When in promisc mode apply promisc mode to Tx Traffic as wellAnjali Singhai Jain1-1/+2
In MFP mode particularly when we were setting the PF VSI in limited promiscuous, the HW switch was still mirroring the outgoing packets from other VSIs (VF/VMdq) onto the PF VSI. With this new bit set, the mirroring doesn't happen any more and so we are in limited promiscuous on the PF VSI in MFP which is similar to defport. An API check is not required, since this bit is reserved for FW API version < 1.5 Also update copyright year in file headers. Change-ID: I9840cb95f11dde733d943cb03ce84f68b9611bc8 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: Bump AQ minor version to 1.5 for new FW featuresShannon Nelson1-1/+1
Bump AQ minor version to 1.5 for new FW features. Change-ID: I5a790f7f519a2a8921aaa1c5663727dd1897ffec Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ thermal sensor control structShannon Nelson1-0/+17
Add the new AQ command and struct for managing a thermal sensor. Change-ID: I6f5631839a0f3dca352a6c222f1269a960e2310a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Add VXLAN-GPE tunnel typeShannon Nelson1-0/+3
Add the new Cisco VXLAN-GPE cloud tunnel type for the Add Cloud Filter and UDP tunnel AQ commands. Change-ID: I2c093c7d79726c7fca08a36e5c63581a905da3d2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Add set_switch_configShannon Nelson1-1/+14
Add the new Set Switch Config AdminQ command, and mark the L2 Filter bit as deprecated in the Add VEB command. Change-ID: I5b24790f14c56f0ddf3f70df1e486844146b039f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-16i40e: AQ Shared resource flagsShannon Nelson1-0/+5
Add flags to MAC allocation requests to signify that the MAC VLAN filters should come from the shared resource pool rather than the dedicated PF resource pools. Change-ID: I4c2da64c01856edcb0982bc4aab75c5a91047a7a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: AQ Add external power class to get link statusShannon Nelson1-1/+6
Add the new External Device Power Ability field to the get_link_status data structure, using space from the reserved field at the end of the struct. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-03i40e: AQ Geneve cloud tunnel typeShannon Nelson1-2/+2
Fix the name of the new cloud tunnel type from the place-holder NGE name to the official Geneve. Also fix the spelling of the VXLAN type. Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-02-03i40e: AQ Add Run PHY Activity structShannon Nelson1-0/+13
Add the AQ opcode and struct definitions for the Run PHY Activity command Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Kevin Scott <kevin.c.scott@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.