aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-4/+32
Three conflicts, one of which, for marvell10g.c is non-trivial and requires some follow-up from Heiner or someone else. The issue is that Heiner converted the marvell10g driver over to use the generic c45 code as much as possible. However, in 'net' a bug fix appeared which makes sure that a new local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0 is cleared. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21i40e: fix XDP_REDIRECT/XDP xmit ring cleanup raceBjörn Töpel2-3/+15
When the driver clears the XDP xmit ring due to re-configuration or teardown, in-progress ndo_xdp_xmit must be taken into consideration. The ndo_xdp_xmit function is typically called from a NAPI context that the driver does not control. Therefore, we must be careful not to clear the XDP ring, while the call is on-going. This patch adds a synchronize_rcu() to wait for napi(s) (preempt-disable regions and softirqs), prior clearing the queue. Further, the __I40E_CONFIG_BUSY flag is checked in the ndo_xdp_xmit implementation to avoid touching the XDP xmit queue during re-configuration. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21i40e: fix potential RX buffer starvation for AF_XDPMagnus Karlsson2-1/+17
When the RX rings are created they are also populated with buffers so that packets can be received. Usually these are kernel buffers, but for AF_XDP in zero-copy mode, these are user-space buffers and in this case the application might not have sent down any buffers to the driver at this point. And if no buffers are allocated at ring creation time, no packets can be received and no interrupts will be generated so the NAPI poll function that allocates buffers to the rings will never get executed. To rectify this, we kick the NAPI context of any queue with an attached AF_XDP zero-copy socket in two places in the code. Once after an XDP program has loaded and once after the umem is registered. This take care of both cases: XDP program gets loaded first then AF_XDP socket is created, and the reverse, AF_XDP socket is created first, then XDP program is loaded. Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-15net: bpf: remove XDP_QUERY_XSK_UMEM enumeratorJan Sokolowski3-33/+0
Commit c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") moved the umem query code to the AF_XDP core, and therefore removed the need to query the netdevice for a umem. This patch removes XDP_QUERY_XSK_UMEM and all code that implement that behavior, which is just dead code. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06flow_offload: add flow_rule and flow_match structures and use themPablo Neira Ayuso1-110/+68
This patch wraps the dissector key and mask - that flower uses to represent the matching side - around the flow_match structure. To avoid a follow up patch that would edit the same LoCs in the drivers, this patch also wraps this new flow match structure around the flow rule object. This new structure will also contain the flow actions in follow up patches. This introduces two new interfaces: bool flow_rule_match_key(rule, dissector_id) that returns true if a given matching key is set on, and: flow_rule_match_XYZ(rule, &match); To fetch the matching side XYZ into the match container structure, to retrieve the key and the mask with one single call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22i40e: clean up several indentation issuesColin Ian King3-8/+8
There are several statements that have incorrect levels of indentation, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: increase indentationJulia Lawall1-1/+1
Convert spaces to tabs to get correct alignment. Found with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: update version numberAlice Michael1-2/+2
Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: remove debugfs tx_timeout supportLihong Yang1-25/+1
The tx_timeout command from debugfs was originally intended to support early silicon validation efforts. It is no longer needed. Thus remove it to avoid misuse of triggering tx_timeout through debugfs. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: check queue pairs num in config queues handlerSergey Nemov1-1/+6
Check if num_queue_pairs number requested by VF is less than maximum possible value in VIRTCHNL_OP_CONFIG_VSI_QUEUES handler. Also check if local_vf_id >= 0 in common handler since it is of int type and can potentially be negative. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Change unmatched function typesGrzegorz Siwik1-4/+4
Change of function declaration from int to u64 due to return type mismatch (u64). Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Add support FEC configuration for Fortville 25GDamian Dybek3-2/+256
This patch adds support for setting/getting FEC configuration using ethtool options: set/show-priv-flags rs-fec/base-r-fec set/show-fec off/rs/baser/auto for kernels version >= 4.14 Signed-off-by: Damian Dybek <damian.dybek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Limiting RSS queues to CPUsAleksandr Loktionov1-0/+1
Limiting RSS queues number to online CPUs number in order to avoid issues with creating misconfigured RSS queues. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Remove umem from VSIJan Sokolowski2-99/+21
As current implementation of netdev already contains and provides umems for us, we no longer have the need to contain these structures in i40e_vsi. Refactor the code to operate on netdev-provided umems. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-17net: Add extack argument to ndo_fdb_add()Petr Machata1-1/+2
Drivers may not be able to support certain FDB entries, and an error code is insufficient to give clear hints as to the reasons of rejection. In order to make it possible to communicate the rejection reason, extend ndo_fdb_add() with an extack argument. Adapt the existing implementations of ndo_fdb_add() to take the parameter (and ignore it). Pass the extack parameter when invoking ndo_fdb_add() from rtnl_fdb_add(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-20Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller2-6/+15
Jeff Kirsher says: ==================== Intel Wired LAN Driver Updates 2018-12-20 This series contains updates to e100, igb, ixgbe, i40e and ice drivers. I replaced spinlocks for mutex locks to reduce the latency on CPU0 for igb when updating the statistics. This work was based off a patch provided by Jan Jablonsky, which was against an older version of the igb driver. Jesus adjusts the receive packet buffer size from 32K to 30K when running in QAV mode, to stay within 60K for total packet buffer size for igb. Vinicius adds igb kernel documentation regarding the CBS algorithm and its implementation in the i210 family of NICs. YueHaibing from Huawei fixed the e100 driver that was potentially passing a NULL pointer, so use the kernel macro IS_ERR_OR_NULL() instead. Konstantin Khorenko fixes i40e where we were not setting up the neigh_priv_len in our net_device, which caused the driver to read beyond the neighbor entry allocated memory. Miroslav Lichvar extends the PTP gettime() to read the system clock by adding support for PTP_SYS_OFFSET_EXTENDED ioctl in i40e. Young Xiao fixed the ice driver to only enable NAPI on q_vectors that actually have transmit and receive rings. Kai-Heng Feng fixes an igb issue that when placed in suspend mode, the NIC does not wake up when a cable is plugged in. This was due to the driver not setting PME during runtime suspend. Stephen Douthit enables the ixgbe driver allow DSA devices to use the MII interface to talk to switches. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20i40e: extend PTP gettime function to read system clockMiroslav Lichvar1-6/+12
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-20i40e: define proper net_device::neigh_priv_lenKonstantin Khorenko1-0/+3
Out of bound read reported by KASan. i40iw_net_event() reads unconditionally 16 bytes from neigh->primary_key while the memory allocated for "neighbour" struct is evaluated in neigh_alloc() as tbl->entry_size + dev->neigh_priv_len where "dev" is a net_device. But the driver does not setup dev->neigh_priv_len and we read beyond the neigh entry allocated memory, so the patch in the next mail fixes this. Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-52/+22
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net: ndo_bridge_setlink: Add extackPetr Machata1-1/+3
Drivers may not be able to implement a VLAN addition or reconfiguration. In those cases it's desirable to explain to the user that it was rejected (and why). To that end, add extack argument to ndo_bridge_setlink. Adapt all users to that change. Following patches will use the new argument in the bridge driver. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12i40e: DRY rx_ptype handling codeMichał Mirosław3-15/+6
Move rx_ptype extracting to i40e_process_skb_fields() to avoid duplicating the code. Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-12i40e: fix VLAN.TCI == 0 RX HW offloadMichał Mirosław3-30/+9
This fixes two bugs in hardware VLAN offload: 1. VLAN.TCI == 0 was being dropped 2. there was a race between disabling of VLAN RX feature in hardware and processing RX queue, where packets processed in this window could have their VLAN information dropped Fix moves the VLAN handling into i40e_process_skb_fields() to save on duplicated code. i40e_receive_skb() becomes trivial and so is removed. Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-12i40e: fix mac filter delete when setting mac addressStefan Assmann1-7/+7
A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-8/+8
Trivial conflict in net/core/filter.c, a locally computed 'sdif' is now an argument to the function. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-28i40e: fix kerneldoc for xsk methodsJan Sokolowski1-7/+7
One method, xsk_umem_setup, had an incorrect kernel doc description, which has been corrected. Also fixes small typos found in the comments. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-28i40e: Fix deletion of MAC filtersLihong Yang1-1/+1
In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for the PF state is wrongly set for the VSI. Deleting any of the MAC filters has caused the incorrect syncing for the PF. Fix it by setting this state flag to the intended PF. CC: stable <stable@vger.kernel.org> Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-21ethernet/intel: consolidate NAPI and NAPI exitJesse Brandeburg1-4/+5
While reviewing code, I noticed that Eric Dumazet recommends that drivers check the return code of napi_complete_done, and use that to decide to enable interrupts or not when exiting poll. One of the Intel drivers was already fixed (ixgbe). Upon looking at the Intel drivers as a whole, we are handling our polling and NAPI exit in a few different ways based on whether we have multiqueue and whether we have Tx cleanup included. Several drivers had the bug of exiting NAPI with return 0, which appears to mess up the accounting in the stack. Consolidate all the NAPI routines to do best known way of exiting and to just mostly look like each other. 1) check return code of napi_complete_done to control interrupt enable 2) return the actual amount of work done. 3) return budget immediately if need NAPI poll again Tested the changes on e1000e with a high interrupt rate set, and it shows about an 8% reduction in the CPU utilization when busy polling because we aren't re-enabling interrupts when we're about to be polled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: prevent overlapping tx_timeout recoverAlan Brady2-0/+6
If a TX hang occurs, we attempt to recover by incrementally resetting. If we're starved for CPU time, it's possible the reset doesn't actually complete (or even fire) before another tx_timeout fires causing us to fly through the different resets without actually doing them. This adds a bit to set and check if a timeout recovery is already pending and, if so, bail out of tx_timeout. The bit will get cleared at the end of i40e_rebuild when reset is complete. Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: suppress bogus error messageMitch Williams1-1/+2
The i40e driver complains about unprivileged VFs trying to configure promiscuous mode each time a VF reset occurs. This isn't the fault of the poor VF driver - the PF driver itself is making the request. To fix this, skip the privilege check if the request is to disable all promiscuous activity. This gets rid of the bogus message, but doesn't affect privilege checks, since we really only care if the unprivileged VF is trying to enable promiscuous mode. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Use correct shift for VLAN priorityRichard Rodriguez1-2/+2
When using port VLAN, for VFs, and setting priority bits, the device was sending out incorrect priority bits, and also setting the CFI bit incorrectly. To fix this, changed shift and mask bit definition for this function, to use the correct ones. Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: always set ks->base.speed in i40e_get_settings_link_upJacob Keller1-0/+1
In i40e_get_settings_link_up, set ks->base.speed to SPEED_UNKNOWN in the case where we don't know the link speed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: don't restart nway if autoneg not supportedMitch Williams1-5/+5
On link types that do not support autoneg, we cannot attempt to restart nway negotiation. This results in a dead link that requires a power cycle to remedy. Fix this by saving off the autoneg state and checking this value before we try to restart nway. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Allow disabling FW LLDP on X722 devicesPatryk Małek4-15/+17
This patch allows disabling FW LLDP agent on X722 devices. It also changes a source of information for this feature from pf->hw_features to pf->hw.flags which are set in i40e_init_adminq. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: update driver versionAlice Michael1-2/+2
The version numbers have not been kept up to date and this is an effort to ammend that. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Protect access to VF control methodsJan Sokolowski2-5/+60
A scenario has been found in which simultaneous addition/removal and modification of VF's might cause unstable behaviour, up to and including kernel panics. Protect the methods that create/modify/destroy VF's by locking them behind an atomically set bit in PF status bitfield. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Replace strncpy with strlcpy to ensure null terminationPatryk Małek2-8/+8
Using strncpy allows destination buffer to be not null terminated after the copying takes place. strlcpy ensures that's not the case by explicitly setting last element in the buffer as '\0'. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Add capability flag for stopping FW LLDPKrzysztof Galazka3-1/+10
Add HW capability flag to indicate that firmware supports stopping LLDP agent. This feature has been added in FW API 1.7 for XL710 devices and 1.6 for X722. Also raise expected minor version number for X722 FW API to 6. Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Use a local variable for readabilityJan Sokolowski1-2/+2
Use a local variable to make the code a bit more readable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Replace spin_is_locked() with lockdepLance Roy1-2/+1
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+5
2018-11-07i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver loadJacob Keller1-3/+3
The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURETodd Fujinaka1-1/+2
There's a new flag for setting WoL filters that is only enabled on one manufacturer's NICs, and it's not ours. Fail with EOPNOTSUPP. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07intel-ethernet: software timestamp skbs as late as possibleJacob Keller1-2/+2
Many of the Intel Ethernet drivers call skb_tx_timestamp() earlier than necessary. Move the calls to this function to the latest point possible, just prior to notifying hardware of the new Tx packet when we bump the tail register. This affects i40e, iavf, igb, igc, and ixgbe. The e100, e1000, e1000e, fm10k, and ice drivers already call the skb_tx_timestamp() function just prior to indicating the Tx packet to hardware, so they do not need to be changed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e: restore NETIF_F_GSO_IPXIP[46] to netdev featuresJacob Keller1-0/+2
Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31i40e: Update status codesMitch Williams1-1/+1
Add a few new status code which will be used by the ice driver, and rename a few to make them more consistent. Error code are mapped to similar values as in i40e_status.h, so as to be compatible with older VF drivers not using this status enum. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds1-1/+0
Pull networking fixes from David Miller: "What better way to start off a weekend than with some networking bug fixes: 1) net namespace leak in dump filtering code of ipv4 and ipv6, fixed by David Ahern and Bjørn Mork. 2) Handle bad checksums from hardware when using CHECKSUM_COMPLETE properly in UDP, from Sean Tranchetti. 3) Remove TCA_OPTIONS from policy validation, it turns out we don't consistently use nested attributes for this across all packet schedulers. From David Ahern. 4) Fix SKB corruption in cadence driver, from Tristram Ha. 5) Fix broken WoL handling in r8169 driver, from Heiner Kallweit. 6) Fix OOPS in pneigh_dump_table(), from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (28 commits) net/neigh: fix NULL deref in pneigh_dump_table() net: allow traceroute with a specified interface in a vrf bridge: do not add port to router list when receives query with source 0.0.0.0 net/smc: fix smc_buf_unuse to use the lgr pointer ipv6/ndisc: Preserve IPv6 control buffer if protocol error handlers are called net/{ipv4,ipv6}: Do not put target net if input nsid is invalid lan743x: Remove SPI dependency from Microchip group. drivers: net: remove <net/busy_poll.h> inclusion when not needed net: phy: genphy_10g_driver: Avoid NULL pointer dereference r8169: fix broken Wake-on-LAN from S5 (poweroff) octeontx2-af: Use GFP_ATOMIC under spin lock net: ethernet: cadence: fix socket buffer corruption problem net/ipv6: Allow onlink routes to have a device mismatch if it is the default route net: sched: Remove TCA_OPTIONS from policy ice: Poll for link status change ice: Allocate VF interrupts and set queue map ice: Introduce ice_dev_onetime_setup net: hns3: Fix for warning uninitialized symbol hw_err_lst3 octeontx2-af: Copy the right amount of memory net: udp: fix handling of CHECKSUM_COMPLETE packets ...
2018-10-25drivers: net: remove <net/busy_poll.h> inclusion when not neededEric Dumazet1-1/+0
Drivers using generic NAPI interface no longer need to include <net/busy_poll.h>, since busy polling was moved to core networking stack long ago. See commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()") for reference. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-25Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds1-9/+0
Pull PCI updates from Bjorn Helgaas: - Fix ASPM link_state teardown on removal (Lukas Wunner) - Fix misleading _OSC ASPM message (Sinan Kaya) - Make _OSC optional for PCI (Sinan Kaya) - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set (Patrick Talbert) - Remove x86 and arm64 node-local allocation for host bridge structures (Punit Agrawal) - Pay attention to device-specific _PXM node values (Jonathan Cameron) - Support new Immediate Readiness bit (Felipe Balbi) - Differentiate between pciehp surprise and safe removal (Lukas Wunner) - Remove unnecessary pciehp includes (Lukas Wunner) - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner) - Tolerate PCIe Slot Presence Detect being hardwired to zero to workaround broken hardware, e.g., the Wilocity switch/wireless device (Lukas Wunner) - Unify pciehp controller & slot structs (Lukas Wunner) - Constify hotplug_slot_ops (Lukas Wunner) - Drop hotplug_slot_info (Lukas Wunner) - Embed hotplug_slot struct into users instead of allocating it separately (Lukas Wunner) - Initialize PCIe port service drivers directly instead of relying on initcall ordering (Keith Busch) - Restore PCI config state after a slot reset (Keith Busch) - Save/restore DPC config state along with other PCI config state (Keith Busch) - Reference count devices during AER handling to avoid race issue with concurrent hot removal (Keith Busch) - If an Upstream Port reports ERR_FATAL, don't try to read the Port's config space because it is probably unreachable (Keith Busch) - During error handling, use slot-specific reset instead of secondary bus reset to avoid link up/down issues on hotplug ports (Keith Busch) - Restore previous AER/DPC handling that does not remove and re-enumerate devices on ERR_FATAL (Keith Busch) - Notify all drivers that may be affected by error recovery resets (Keith Busch) - Always generate error recovery uevents, even if a driver doesn't have error callbacks (Keith Busch) - Make PCIe link active reporting detection generic (Keith Busch) - Support D3cold in PCIe hierarchies during system sleep and runtime, including hotplug and Thunderbolt ports (Mika Westerberg) - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots are empty or occupied (Jon Derrick) - Remove duplicated include from pci/pcie/err.c and unused variable from cpqphp (YueHaibing) - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza Pawandeep) - Uninline PCI bus accessors for better ftracing (Keith Busch) - Remove unused AER Root Port .error_resume method (Keith Busch) - Use kfifo in AER instead of a local version (Keith Busch) - Use threaded IRQ in AER bottom half (Keith Busch) - Use managed resources in AER core (Keith Busch) - Reuse pcie_port_find_device() for AER injection (Keith Busch) - Abstract AER interrupt handling to disconnect error injection (Keith Busch) - Refactor AER injection callbacks to simplify future improvments (Keith Busch) - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski) - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko) - Add switch fall-through annotations (Gustavo A. R. Silva) - Remove unused Switchtec quirk variable (Joshua Abraham) - Fix pci.c kernel-doc warning (Randy Dunlap) - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig) - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng) - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid useless dmesg errors (Logan Gunthorpe) - Update Switchtec NTB documentation (Wesley Yung) - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz) - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang) - Add PCI support for peer-to-peer DMA (Logan Gunthorpe) - Add sysfs group for PCI peer-to-peer memory statistics (Logan Gunthorpe) - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan Gunthorpe) - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan Gunthorpe) - Add PCI peer-to-peer DMA driver writer's documentation (Logan Gunthorpe) - Add block layer flag to indicate driver support for PCI peer-to-peer DMA (Logan Gunthorpe) - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P memory (Logan Gunthorpe) - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan Gunthorpe) - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan Gunthorpe) - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise, Christoph Hellwig, Logan Gunthorpe) - Cache VF config space size to optimize enumeration of many VFs (KarimAllah Ahmed) - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas) - Fix VMD AERSID quirk Device ID matching (Jon Derrick) - Fix Cadence PHY handling during probe (Alan Douglas) - Signal Cadence Endpoint interrupts via AXI region 0 instead of last region (Alan Douglas) - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan Douglas) - Remove redundant controller tests for "device_type == pci" (Rob Herring) - Document R-Car E3 (R8A77990) bindings (Tho Vu) - Add device tree support for R-Car r8a7744 (Biju Das) - Drop unused mvebu PCIe capability code (Thomas Petazzoni) - Add shared PCI bridge emulation code (Thomas Petazzoni) - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni) - Add aardvark Root Port emulation (Thomas Petazzoni) - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach) - Add initial power management for i.MX7 (Leonard Crestez) - Add PME_Turn_Off support for i.MX7 (Leonard Crestez) - Fix qcom runtime power management error handling (Bjorn Andersson) - Update TI dra7xx unaligned access errata workaround for host mode as well as endpoint mode (Vignesh R) - Fix kirin section mismatch warning (Nathan Chancellor) - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare) - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I) - Update Keystone to use MRRS quirk for host bridge instead of open coding (Kishon Vijay Abraham I) - Refactor Keystone link establishment (Kishon Vijay Abraham I) - Simplify and speed up Keystone link training (Kishon Vijay Abraham I) - Remove unused Keystone host_init argument (Kishon Vijay Abraham I) - Merge Keystone driver files into one (Kishon Vijay Abraham I) - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay Abraham I) - Rename Keystone functions for uniformity (Kishon Vijay Abraham I) - Add Keystone device control module DT binding (Kishon Vijay Abraham I) - Use SYSCON API to get Keystone control module device IDs (Kishon Vijay Abraham I) - Clean up Keystone PHY handling (Kishon Vijay Abraham I) - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I) - Clean up Keystone config space access checks (Kishon Vijay Abraham I) - Get Keystone outbound window count from DT (Kishon Vijay Abraham I) - Clean up Keystone outbound window configuration (Kishon Vijay Abraham I) - Clean up Keystone DBI setup (Kishon Vijay Abraham I) - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I) - Fix Keystone IRQ status checking (Kishon Vijay Abraham I) - Add debug messages for all Keystone errors (Kishon Vijay Abraham I) - Clean up Keystone includes and macros (Kishon Vijay Abraham I) - Fix Mediatek unchecked return value from devm_pci_remap_iospace() (Gustavo A. R. Silva) - Fix Mediatek endpoint/port matching logic (Honghui Zhang) - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui Zhang) - Remove redundant Mediatek PM domain check (Honghui Zhang) - Convert Mediatek to pci_host_probe() (Honghui Zhang) - Fix Mediatek MSI enablement (Honghui Zhang) - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang) - Add Mediatek loadable module support (Honghui Zhang) - Detach VMD resources after stopping root bus to prevent orphan resources (Jon Derrick) - Convert pcitest build process to that used by other tools (iio, perf, etc) (Gustavo Pimentel) * tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits) PCI/AER: Refactor error injection fallbacks PCI/AER: Abstract AER interrupt handling PCI/AER: Reuse existing pcie_port_find_device() interface PCI/AER: Use managed resource allocations PCI: pcie: Remove redundant 'default n' from Kconfig PCI: aardvark: Implement emulated root PCI bridge config space PCI: mvebu: Convert to PCI emulated bridge config space PCI: mvebu: Drop unused PCI express capability code PCI: Introduce PCI bridge emulated config space common logic PCI: vmd: Detach resources after stopping root bus nvmet: Optionally use PCI P2P memory nvmet: Introduce helper functions to allocate and free request SGLs nvme-pci: Add support for P2P memory in requests nvme-pci: Use PCI p2pmem subsystem to manage the CMB IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]() block: Add PCI P2P flag for request queue PCI/P2PDMA: Add P2P DMA driver writer's documentation docs-rst: Add a new directory for PCI documentation PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset ...
2018-10-03i40e: Remove unnecessary print statementNathan Chancellor1-2/+0
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/ethernet/intel/i40e/i40e_debugfs.c:136:9: warning: address of array 'vsi->active_vlans' will always evaluate to 'true' [-Wpointer-bool-conversion] vsi->active_vlans ? "<valid>" : "<null>"); ~~~~~^~~~~~~~~~~~ ~ ./include/linux/device.h:1431:33: note: expanded from macro 'dev_info' _dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~ 1 warning generated. Given that the statement shows that active_vlans is always valid, just remove the statement since it's not giving any useful information. Link: https://github.com/ClangBuiltLinux/linux/issues/82 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>