aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40e (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-21i40e: fix XDP_REDIRECT/XDP xmit ring cleanup raceBjörn Töpel2-3/+15
When the driver clears the XDP xmit ring due to re-configuration or teardown, in-progress ndo_xdp_xmit must be taken into consideration. The ndo_xdp_xmit function is typically called from a NAPI context that the driver does not control. Therefore, we must be careful not to clear the XDP ring, while the call is on-going. This patch adds a synchronize_rcu() to wait for napi(s) (preempt-disable regions and softirqs), prior clearing the queue. Further, the __I40E_CONFIG_BUSY flag is checked in the ndo_xdp_xmit implementation to avoid touching the XDP xmit queue during re-configuration. Fixes: d9314c474d4f ("i40e: add support for XDP_REDIRECT") Fixes: 123cecd427b6 ("i40e: added queue pair disable/enable functions") Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-21i40e: fix potential RX buffer starvation for AF_XDPMagnus Karlsson2-1/+17
When the RX rings are created they are also populated with buffers so that packets can be received. Usually these are kernel buffers, but for AF_XDP in zero-copy mode, these are user-space buffers and in this case the application might not have sent down any buffers to the driver at this point. And if no buffers are allocated at ring creation time, no packets can be received and no interrupts will be generated so the NAPI poll function that allocates buffers to the rings will never get executed. To rectify this, we kick the NAPI context of any queue with an attached AF_XDP zero-copy socket in two places in the code. Once after an XDP program has loaded and once after the umem is registered. This take care of both cases: XDP program gets loaded first then AF_XDP socket is created, and the reverse, AF_XDP socket is created first, then XDP program is loaded. Fixes: 0a714186d3c0 ("i40e: add AF_XDP zero-copy Rx support") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-02-15net: bpf: remove XDP_QUERY_XSK_UMEM enumeratorJan Sokolowski3-33/+0
Commit c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") moved the umem query code to the AF_XDP core, and therefore removed the need to query the netdevice for a umem. This patch removes XDP_QUERY_XSK_UMEM and all code that implement that behavior, which is just dead code. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-06flow_offload: add flow_rule and flow_match structures and use themPablo Neira Ayuso1-110/+68
This patch wraps the dissector key and mask - that flower uses to represent the matching side - around the flow_match structure. To avoid a follow up patch that would edit the same LoCs in the drivers, this patch also wraps this new flow match structure around the flow rule object. This new structure will also contain the flow actions in follow up patches. This introduces two new interfaces: bool flow_rule_match_key(rule, dissector_id) that returns true if a given matching key is set on, and: flow_rule_match_XYZ(rule, &match); To fetch the matching side XYZ into the match container structure, to retrieve the key and the mask with one single call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22i40e: clean up several indentation issuesColin Ian King3-8/+8
There are several statements that have incorrect levels of indentation, fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: increase indentationJulia Lawall1-1/+1
Convert spaces to tabs to get correct alignment. Found with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: update version numberAlice Michael1-2/+2
Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: remove debugfs tx_timeout supportLihong Yang1-25/+1
The tx_timeout command from debugfs was originally intended to support early silicon validation efforts. It is no longer needed. Thus remove it to avoid misuse of triggering tx_timeout through debugfs. Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: check queue pairs num in config queues handlerSergey Nemov1-1/+6
Check if num_queue_pairs number requested by VF is less than maximum possible value in VIRTCHNL_OP_CONFIG_VSI_QUEUES handler. Also check if local_vf_id >= 0 in common handler since it is of int type and can potentially be negative. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Change unmatched function typesGrzegorz Siwik1-4/+4
Change of function declaration from int to u64 due to return type mismatch (u64). Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Add support FEC configuration for Fortville 25GDamian Dybek3-2/+256
This patch adds support for setting/getting FEC configuration using ethtool options: set/show-priv-flags rs-fec/base-r-fec set/show-fec off/rs/baser/auto for kernels version >= 4.14 Signed-off-by: Damian Dybek <damian.dybek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Limiting RSS queues to CPUsAleksandr Loktionov1-0/+1
Limiting RSS queues number to online CPUs number in order to avoid issues with creating misconfigured RSS queues. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-22i40e: Remove umem from VSIJan Sokolowski2-99/+21
As current implementation of netdev already contains and provides umems for us, we no longer have the need to contain these structures in i40e_vsi. Refactor the code to operate on netdev-provided umems. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Acked-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-01-17net: Add extack argument to ndo_fdb_add()Petr Machata1-1/+2
Drivers may not be able to support certain FDB entries, and an error code is insufficient to give clear hints as to the reasons of rejection. In order to make it possible to communicate the rejection reason, extend ndo_fdb_add() with an extack argument. Adapt the existing implementations of ndo_fdb_add() to take the parameter (and ignore it). Pass the extack parameter when invoking ndo_fdb_add() from rtnl_fdb_add(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-20i40e: extend PTP gettime function to read system clockMiroslav Lichvar1-6/+12
This adds support for the PTP_SYS_OFFSET_EXTENDED ioctl. Cc: Richard Cochran <richardcochran@gmail.com> Cc: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-20i40e: define proper net_device::neigh_priv_lenKonstantin Khorenko1-0/+3
Out of bound read reported by KASan. i40iw_net_event() reads unconditionally 16 bytes from neigh->primary_key while the memory allocated for "neighbour" struct is evaluated in neigh_alloc() as tbl->entry_size + dev->neigh_priv_len where "dev" is a net_device. But the driver does not setup dev->neigh_priv_len and we read beyond the neigh entry allocated memory, so the patch in the next mail fixes this. Signed-off-by: Konstantin Khorenko <khorenko@virtuozzo.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-12net: ndo_bridge_setlink: Add extackPetr Machata1-1/+3
Drivers may not be able to implement a VLAN addition or reconfiguration. In those cases it's desirable to explain to the user that it was rejected (and why). To that end, add extack argument to ndo_bridge_setlink. Adapt all users to that change. Following patches will use the new argument in the bridge driver. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12i40e: DRY rx_ptype handling codeMichał Mirosław3-15/+6
Move rx_ptype extracting to i40e_process_skb_fields() to avoid duplicating the code. Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-12i40e: fix VLAN.TCI == 0 RX HW offloadMichał Mirosław3-30/+9
This fixes two bugs in hardware VLAN offload: 1. VLAN.TCI == 0 was being dropped 2. there was a race between disabling of VLAN RX feature in hardware and processing RX queue, where packets processed in this window could have their VLAN information dropped Fix moves the VLAN handling into i40e_process_skb_fields() to save on duplicated code. i40e_receive_skb() becomes trivial and so is removed. Signed-off-by: Michał Mirosław <michal.miroslaw@atendesoftware.pl> Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-12-12i40e: fix mac filter delete when setting mac addressStefan Assmann1-7/+7
A previous commit moved the ether_addr_copy() in i40e_set_mac() before the mac filter del/add to avoid a race. However it wasn't taken into account that this alters the mac address being handed to i40e_del_mac_filter(). Also changed i40e_add_mac_filter() to operate on netdev->dev_addr, hopefully that makes the code easier to read. Fixes: 458867b2ca0c ("i40e: don't remove netdev->dev_addr when syncing uc list") Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-28i40e: fix kerneldoc for xsk methodsJan Sokolowski1-7/+7
One method, xsk_umem_setup, had an incorrect kernel doc description, which has been corrected. Also fixes small typos found in the comments. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-28i40e: Fix deletion of MAC filtersLihong Yang1-1/+1
In __i40e_del_filter function, the flag __I40E_MACVLAN_SYNC_PENDING for the PF state is wrongly set for the VSI. Deleting any of the MAC filters has caused the incorrect syncing for the PF. Fix it by setting this state flag to the intended PF. CC: stable <stable@vger.kernel.org> Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-21ethernet/intel: consolidate NAPI and NAPI exitJesse Brandeburg1-4/+5
While reviewing code, I noticed that Eric Dumazet recommends that drivers check the return code of napi_complete_done, and use that to decide to enable interrupts or not when exiting poll. One of the Intel drivers was already fixed (ixgbe). Upon looking at the Intel drivers as a whole, we are handling our polling and NAPI exit in a few different ways based on whether we have multiqueue and whether we have Tx cleanup included. Several drivers had the bug of exiting NAPI with return 0, which appears to mess up the accounting in the stack. Consolidate all the NAPI routines to do best known way of exiting and to just mostly look like each other. 1) check return code of napi_complete_done to control interrupt enable 2) return the actual amount of work done. 3) return budget immediately if need NAPI poll again Tested the changes on e1000e with a high interrupt rate set, and it shows about an 8% reduction in the CPU utilization when busy polling because we aren't re-enabling interrupts when we're about to be polled. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: prevent overlapping tx_timeout recoverAlan Brady2-0/+6
If a TX hang occurs, we attempt to recover by incrementally resetting. If we're starved for CPU time, it's possible the reset doesn't actually complete (or even fire) before another tx_timeout fires causing us to fly through the different resets without actually doing them. This adds a bit to set and check if a timeout recovery is already pending and, if so, bail out of tx_timeout. The bit will get cleared at the end of i40e_rebuild when reset is complete. Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: suppress bogus error messageMitch Williams1-1/+2
The i40e driver complains about unprivileged VFs trying to configure promiscuous mode each time a VF reset occurs. This isn't the fault of the poor VF driver - the PF driver itself is making the request. To fix this, skip the privilege check if the request is to disable all promiscuous activity. This gets rid of the bogus message, but doesn't affect privilege checks, since we really only care if the unprivileged VF is trying to enable promiscuous mode. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Use correct shift for VLAN priorityRichard Rodriguez1-2/+2
When using port VLAN, for VFs, and setting priority bits, the device was sending out incorrect priority bits, and also setting the CFI bit incorrectly. To fix this, changed shift and mask bit definition for this function, to use the correct ones. Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: always set ks->base.speed in i40e_get_settings_link_upJacob Keller1-0/+1
In i40e_get_settings_link_up, set ks->base.speed to SPEED_UNKNOWN in the case where we don't know the link speed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: don't restart nway if autoneg not supportedMitch Williams1-5/+5
On link types that do not support autoneg, we cannot attempt to restart nway negotiation. This results in a dead link that requires a power cycle to remedy. Fix this by saving off the autoneg state and checking this value before we try to restart nway. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Allow disabling FW LLDP on X722 devicesPatryk Małek4-15/+17
This patch allows disabling FW LLDP agent on X722 devices. It also changes a source of information for this feature from pf->hw_features to pf->hw.flags which are set in i40e_init_adminq. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: update driver versionAlice Michael1-2/+2
The version numbers have not been kept up to date and this is an effort to ammend that. Signed-off-by: Alice Michael <alice.michael@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Protect access to VF control methodsJan Sokolowski2-5/+60
A scenario has been found in which simultaneous addition/removal and modification of VF's might cause unstable behaviour, up to and including kernel panics. Protect the methods that create/modify/destroy VF's by locking them behind an atomically set bit in PF status bitfield. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Replace strncpy with strlcpy to ensure null terminationPatryk Małek2-8/+8
Using strncpy allows destination buffer to be not null terminated after the copying takes place. strlcpy ensures that's not the case by explicitly setting last element in the buffer as '\0'. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Add capability flag for stopping FW LLDPKrzysztof Galazka3-1/+10
Add HW capability flag to indicate that firmware supports stopping LLDP agent. This feature has been added in FW API 1.7 for XL710 devices and 1.6 for X722. Also raise expected minor version number for X722 FW API to 6. Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Use a local variable for readabilityJan Sokolowski1-2/+2
Use a local variable to make the code a bit more readable. Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Replace spin_is_locked() with lockdepLance Roy1-2/+1
lockdep_assert_held() is better suited to checking locking requirements, since it won't get confused when someone else holds the lock. This is also a step towards possibly removing spin_is_locked(). Signed-off-by: Lance Roy <ldr709@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e: enable NETIF_F_NTUPLE and NETIF_F_HW_TC at driver loadJacob Keller1-3/+3
The assignment of the feature flag NETIF_F_NTUPLE and NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This means the features are set as user-changeable, but are not set in the currently active feature list. This results in the features being disabled at the driver's initial load. Move the assignment after the initial assignment of hw_features, and assign to the local variable. This ensures that NETIF_F_NTUPLE and NETIF_F_HW_TC are marked as user-changeable, and also enables them by default when the driver loads. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURETodd Fujinaka1-1/+2
There's a new flag for setting WoL filters that is only enabled on one manufacturer's NICs, and it's not ours. Fail with EOPNOTSUPP. Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07intel-ethernet: software timestamp skbs as late as possibleJacob Keller1-2/+2
Many of the Intel Ethernet drivers call skb_tx_timestamp() earlier than necessary. Move the calls to this function to the latest point possible, just prior to notifying hardware of the new Tx packet when we bump the tail register. This affects i40e, iavf, igb, igc, and ixgbe. The e100, e1000, e1000e, fm10k, and ice drivers already call the skb_tx_timestamp() function just prior to indicating the Tx packet to hardware, so they do not need to be changed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-07i40e: restore NETIF_F_GSO_IPXIP[46] to netdev featuresJacob Keller1-0/+2
Since commit bacd75cfac8a ("i40e/i40evf: Add capability exchange for outer checksum", 2017-04-06) the i40e driver has not reported support for IP-in-IP offloads. This likely occurred due to a bad rebase, as the commit extracts hw_enc_features into its own variable. As part of this change, it dropped the NETIF_F_FSO_IPXIP flags from the netdev->hw_enc_features. This was unfortunately not caught during code review. Fix this by adding back the missing feature flags. For reference, NETIF_F_GSO_IPXIP4 was added in commit 7e13318daa4a ("net: define gso types for IPx over IPv4 and IPv6", 2016-05-20), replacing NETIF_F_GSO_IPIP and NETIF_F_GSO_SIT. NETIF_F_GSO_IPXIP6 was added in commit bf2d1df39502 ("intel: Add support for IPv6 IP-in-IP offload", 2016-05-20). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-31i40e: Update status codesMitch Williams1-1/+1
Add a few new status code which will be used by the ice driver, and rename a few to make them more consistent. Error code are mapped to similar values as in i40e_status.h, so as to be compatible with older VF drivers not using this status enum. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-25drivers: net: remove <net/busy_poll.h> inclusion when not neededEric Dumazet1-1/+0
Drivers using generic NAPI interface no longer need to include <net/busy_poll.h>, since busy polling was moved to core networking stack long ago. See commit 79e7fff47b7b ("net: remove support for per driver ndo_busy_poll()") for reference. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-03i40e: Remove unnecessary print statementNathan Chancellor1-2/+0
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/ethernet/intel/i40e/i40e_debugfs.c:136:9: warning: address of array 'vsi->active_vlans' will always evaluate to 'true' [-Wpointer-bool-conversion] vsi->active_vlans ? "<valid>" : "<null>"); ~~~~~^~~~~~~~~~~~ ~ ./include/linux/device.h:1431:33: note: expanded from macro 'dev_info' _dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~ 1 warning generated. Given that the statement shows that active_vlans is always valid, just remove the statement since it's not giving any useful information. Link: https://github.com/ClangBuiltLinux/linux/issues/82 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03i40e: Use proper enum in i40e_ndo_set_vf_link_stateNathan Chancellor1-1/+1
Clang warns when one enumerated type is converted implicitly to another. drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning: implicit conversion from enumeration type 'enum i40e_aq_link_speed' to different enumeration type 'enum virtchnl_link_speed' [-Wenum-conversion] pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB; ~ ^~~~~~~~~~~~~~~~~~~~ 1 warning generated. Use the proper enum from virtchnl_link_speed, which has the same value as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be missed by commit ff3f4cc267f6 ("virtchnl: finish conversion to virtchnl interface"). Link: https://github.com/ClangBuiltLinux/linux/issues/81 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep1-9/+0
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-09-25i40e: disallow changing the number of descriptors when AF_XDP is onBjörn Töpel3-0/+30
When an AF_XDP UMEM is attached to any of the Rx rings, we disallow a user to change the number of descriptors via e.g. "ethtool -G IFNAME". Otherwise, the size of the stash/reuse queue can grow unbounded, which would result in OOM or leaking userspace buffers. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-25i40e: clean zero-copy XDP Rx ring on shutdown/resetBjörn Töpel3-9/+96
Outstanding Rx descriptors are temporarily stored on a stash/reuse queue. When/if the HW rings comes up again, entries from the stash are used to re-populate the ring. The latter required some restructuring of the allocation scheme for the AF_XDP zero-copy implementation. There is now a fast, and a slow allocation. The "fast allocation" is used from the fast-path and obtains free buffers from the fill ring and the internal recycle mechanism. The "slow allocation" is only used in ring setup, and obtains buffers from the fill ring and the stash (if any). Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-25i40e: clean zero-copy XDP Tx ring on shutdown/resetBjörn Töpel3-6/+43
When the zero-copy enabled XDP Tx ring is torn down, due to configuration changes, outstanding frames on the hardware descriptor ring are queued on the completion ring. The completion ring has a back-pressure mechanism that will guarantee that there is sufficient space on the ring. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-25i40e: Remove unused msglen parameter from virtchnl functionsPatryk Małek1-59/+37
msglen parameter seems to be unused in several virtchnl function. This patch removes it from signatures of those functions. Signed-off-by: Patryk Małek <patryk.malek@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-25i40e: fix double 'NIC Link is Down' messagesSergey Nemov1-1/+4
When isup is false meaning that interface is going to shut down set new speed to 0 to avoid double 'NIC Link is Down' messages. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>