aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/i40evf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-10-31i40e: Implementation of ERROR state for NVM update state machineMaciej Sosin2-2/+3
This patch adds I40E_NVMUPD_STATE_ERROR state for NVM update. Without this patch driver has no possibility to return NVM image write failure.This state is being set when ARQ rises error. arq_last_status is also updated every time when ARQ event comes, not only on error cases. Change-ID: I67ce43ba22a240773c2821b436e96054db0b7c81 Signed-off-by: Maciej Sosin <maciej.sosin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40e: Reorder logic for coalescing RS bitsAlexander Duyck2-52/+54
This patch reorders the logic at the end of i40e_tx_map to address the fact that the logic was rather convoluted and much larger than it needed to be. In order to try and coalesce the code paths I have updated some of the comments and repurposed some of the variables in order to reduce unnecessary overhead. This patch does the following: 1. Quit tracking skb->xmit_more with a flag, just max out packet_stride 2. Drop tail_bump and do_rs and instead just use desc_count and td_cmd 3. Pull comments from ixgbe that make need for wmb() more explicit. Change-ID: Ic7da85ec75043c634e87fef958109789bcc6317c Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-31i40evf: avoid an extra msleep whileJacob Keller1-3/+5
Remove the second call to msleep outside the loop, and move the msleep within the loop as the first step. This guarantees that a single loop will wait the minimum time first, and then after the reset finishes we no longer need an extra msleep. Change-ID: Ib2086f0a142402b614f67846bc091754203a0b9a Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e/i40evf: Changed version from 1.6.19 to 1.6.21Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: Drop redundant Rx descriptor processing codeAlexander Duyck1-12/+6
This patch cleans up several pieces of redundant code in the Rx clean-up paths. The first bit is that hdr_addr and the status_err_len portions of the Rx descriptor represent the same value. As such there is no point in setting them to 0 before setting them to 0. I'm dropping the second spot where we are updating the value to 0 so that we only have 1 write for this value instead of 2. The second piece is the checking for the DD bit in the packet. We only need to check for a non-zero value for the status_err_len because if the device is done with the descriptor it will have written something back and the DD is just one piece of it. In addition I have moved the reading of the Rx descriptor bits related to rx_ptype down so that they are actually below the dma_rmb() call so that we are guaranteed that we don't have any funky 64b on 32b calls causing any ordering issues. Change-ID: I256e44a025d3c64a7224aaaec37c852bfcb1871b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e/i40evf: Changed version from 1.6.16 to 1.6.19Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e/i40evf: fix interrupt affinity bugAlan Brady3-27/+78
There exists a bug in which a 'perfect storm' can occur and cause interrupts to fail to be correctly affinitized. This causes unexpected behavior and has a substantial impact on performance when it happens. The bug occurs if there is heavy traffic, any number of CPUs that have an i40e interrupt are pegged at 100%, and the interrupt afffinity for those CPUs is changed. Instead of moving to the new CPU, the interrupt continues to be polled while there is heavy traffic. The bug is most readily realized as the driver is first brought up and all interrupts start on CPU0. If there is heavy traffic and the interrupt starts polling before the interrupt is affinitized, the interrupt will be stuck on CPU0 until traffic stops. The bug, however, can also be wrought out more simply by affinitizing all the interrupts to a single CPU and then attempting to move any of those interrupts off while there is heavy traffic. This patch fixes the bug by registering for update notifications from the kernel when the interrupt affinity changes. When that fires, we cache the intended affinity mask. Then, while polling, if the cpu is pegged at 100% and we failed to clean the rings, we check to make sure we have the correct affinity and stop polling if we're firing on the wrong CPU. When the kernel successfully moves the interrupt, it will start polling on the correct CPU. The performance impact is minimal since the only time this section gets executed is when performance is already compromised by the CPU. Change-ID: I4410a880159b9dba1f8297aa72bef36dca34e830 Signed-off-by: Alan Brady <alan.brady@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-28i40e: group base mode VF offload flagsPreethi Banala1-0/+4
Group together the minimum set of offload capabilities that are always supported by VF in base mode. This define would be used by PF to make sure VF in base mode gets minimum of base capabilities . Change-ID: Id5e8f22ba169c8f0a38d22fc36b2cb531c02582c Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-10-18ethernet/intel: use core min/max MTU checkingJarod Wilson1-4/+4
e100: min_mtu 68, max_mtu 1500 - remove e100_change_mtu entirely, is identical to old eth_change_mtu, and no longer serves a purpose. No need to set min_mtu or max_mtu explicitly, as ether_setup() will already set them to 68 and 1500. e1000: min_mtu 46, max_mtu 16110 e1000e: min_mtu 68, max_mtu varies based on adapter fm10k: min_mtu 68, max_mtu 15342 - remove fm10k_change_mtu entirely, does nothing now i40e: min_mtu 68, max_mtu 9706 i40evf: min_mtu 68, max_mtu 9706 igb: min_mtu 68, max_mtu 9216 - There are two different "max" frame sizes claimed and both checked in the driver, the larger value wasn't relevant though, so I've set max_mtu to the smaller of the two values here to retain identical behavior. igbvf: min_mtu 68, max_mtu 9216 - Same issue as igb duplicated ixgb: min_mtu 68, max_mtu 16114 - Also remove pointless old == new check, as that's done in dev_set_mtu ixgbe: min_mtu 68, max_mtu 9710 ixgbevf: min_mtu 68, max_mtu dependent on hardware/firmware - Some hw can only handle up to max_mtu 1504 on a vf, others 9710 CC: netdev@vger.kernel.org CC: intel-wired-lan@lists.osuosl.org CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24i40evf: support queue-specific settings for interrupt moderationJacob Keller5-62/+195
In commit a75e8005d506f3 ("i40e: queue-specific settings for interrupt moderation") the i40e driver gained support for setting interrupt moderation values per queue. This patch adds support for this feature to the i40evf driver as well. In addition, a few changes are made to the i40e implementation to add function header documentation comments, as well. This behaves in a similar fashion to the implementation in i40e. Thus, requesting the moderation value when no queue is provided will report queue 0 value, while setting the value without a queue will set all queues at once. Change-ID: I1f310a57c8e6c84a8524c178d44d1b7a6d3a848e Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e/i40evf: Add txring_txq function to match fm10k and ixgbeAlexander Duyck2-11/+15
This patch adds a txring_txq function which allows us to convert a i40e_ring/i40evf_ring to a netdev_tx_queue structure. This way we can avoid having to make a multi-line function call for all the spots that need access to this. Change-ID: Ic063b71d8b92ea406d2c32e798c8e2b02809d65b Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e: Fix Flow Director raw_buf cleanupAlexander Duyck1-4/+4
The Tx cleanup flow was incorrectly assuming it could check for the flow director bits after it had unmapped the buffer. However in this case it results in us trying to free a raw_buf as though it is an sk_buff. To fix this I am moving up the flag test for the FD_SB bit so that when find a non-NULL skb or raw_buf value we then check the flag and use the appropriate call to free the buffer. Change-ID: I6284034ba1ea87c9922e56f6eb3181f7f09bddde Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40evf: enable adaptive interrupt throttlingMitch Williams1-5/+11
All of the code to support adaptive interrupt throttling is already in the interrupt handler, it just needs to be enabled. Fill out the data structures properly to make it happen. Single-flow traffic tests may show slightly lower throughput, but interrupts per second will drop by about 75%. Change-ID: I9cd7d42c025b906bf1bb85c6aeb6112684aa6471 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e/i40evf: Changed version to 1.6.16Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-24i40e: add encap csum VF offload flagPreethi Banala1-0/+1
Add ENCAP_CSUM offload negotiation flag. Currently VF assumes checksum offload for encapsulated packets is supported by default. Going forward, this feature needs to be negotiated with PF before advertising to the stack. Hence, we need a flag to control it. This is in regards to prepping up for VF base mode functionality support. Change-ID: Iaab1f25cc0abda5f2fbe3309092640f0e77d163e Signed-off-by: Preethi Banala <preethi.banala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40e_shutdown_adminqLihong Yang1-2/+1
The i40e_shutdown_adminq function never returns failure. There is no need to check the non-0 return value. Clean up the unnecessary error checking and warning against it. Change-ID: Ibb616f09cfb93bd1a872ebf3241a15fb8354b31b Signed-off-by: Lihong Yang <lihong.yang@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: Limit TX descriptor count in cases where frag size is greater than 16KAlexander Duyck1-5/+2
The i40e driver was incorrectly assuming that we would always be pulling no more than 1 descriptor from each fragment. It is in fact possible for us to end up with the case where 2 descriptors worth of data may be pulled when a frame is larger than one of the pieces generated when aligning the payload to either 4K or pieces smaller than 16K. To adjust for this we just need to make certain to test all the way to the end of the fragments as it is possible for us to span 2 descriptors in the block before us so we need to guarantee that even the last 6 descriptors have enough data to fill a full frame. Change-ID: Ic2ecb4d6b745f447d334e66c14002152f50e2f99 Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: remove unnecessary error checking against i40evf_up_completeBimmy Pujari1-8/+3
Function i40evf_up_complete() always returns success. Changed this to a void type and removed the code that checks the return status and prints an error message. Change-ID: I8c400f174786b9c855f679e470f35af292fb50ad Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40evf: Fix link state event handlingSridhar Samudrala2-3/+11
Currently disabling the link state from PF via ip link set enp5s0f0 vf 0 state disable doesn't disable the CARRIER on the VF. This patch updates the carrier and starts/stops the tx queues based on the link state notification from PF. PF: enp5s0f0, VF: enp5s2 #modprobe i40e #echo 2 > /sys/class/net/enp5s0f0/device/sriov_numvfs #ip link set enp5s2 up #ip -d link show enp5s2 175: enp5s2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 #ip link set enp5s0f0 vf 0 state disable #ip -d link show enp5s0f0 171: enp5s0f0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether 68:05:ca:2e:72:68 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 72 numrxqueues 72 portid 6805ca2e7268 vf 0 MAC 00:00:00:00:00:00, spoof checking on, link-state disable, trust off vf 1 MAC 00:00:00:00:00:00, spoof checking on, link-state auto, trust off #ip -d link show enp5s2 175: enp5s2: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether ea:4d:60:bc:6f:85 brd ff:ff:ff:ff:ff:ff promiscuity 0 addrgenmode eui64 numtxqueues 16 numrxqueues 16 Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-09-22i40e: avoid potential null pointer dereference when assigning lenColin Ian King1-1/+2
There is a sanitcy check for desc being null in the first line of function i40evf_debug_aq. However, before that, aq_desc is cast from desc, and aq_desc is being dereferenced on the assignment of len, so this could be a potential null pointer deference. Fix this by moving the initialization of len to the code block where len is being used and hence at this point we know it is OK to dereference aq_desc. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40evf: Open RDMA Client after resetAvinash Dayanand1-0/+2
RDMA client is closed during the PF reset and needs to be opened again. Setting the flag so that RDMA client is opened in watchdog() function. Change-ID: I507b1e4cbd05528cdff68fd360ef3dcac8901263 Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e/i40evf: Fix indentationJeff Kirsher1-27/+30
Several defines and code comments were indented with spaces instead of tabs, correct the issue to make indentation consistent. Change-ID: I0dc6bbb990ec4a9e856acc9ec526d876181f092c Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2016-08-19i40e: Add support for HMC resource and profile for X722Carolyn Wyborny1-0/+21
This patch adds support for HMC resource and profile cmds for X722 firmware. Change-ID: Icc332101f38ab15d1bfa167823100eb4f6822f7e Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: Fix byte ordering in ARP NS code for X722Carolyn Wyborny1-17/+21
This patch fixes byte ordering problems found when enabling this feature support. Without this patch, the feature will not work correctly. This patch fixes the definitions to have the correct byte order. Change-ID: Ic7489fbcbe2195df7be62ff5e359201b827cefe6 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: refactor tail_bump checkCarolyn Wyborny1-4/+2
This patch refactors tail bump check. Change-ID: Ide0e19171d67d90cb2b06b8dcd4fa791ae120160 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40evf: report link speedMitch Williams3-12/+70
The PF driver tells us the link speed, so do something with that information. Add link speed to log messages, and report speed through ethtool. Change-Id: I279dc9540cc5203376406050a3e8d67e128d5882 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-19i40e: use alloc_workqueue instead of create_singlethread_workqueueJacob Keller1-1/+2
Replace calls to create_singlethread_workqueue instead with alloc_workqueue as is style with other Intel drivers. This provides more control over workqueue creation, and allows explicit setting of the desired mode of operation. It also makes it more obvious that driver name constant is passed to a format "%s". Change-ID: I6192b44caf5140336cd54c5b350d51c73b541fdb Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40e/i40evf-Bump version from 1.6.11 to 1.6.12Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <Bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-08-18i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capabilityJacob Keller1-0/+2
The function calls netif_set_real_num_(tx|rx)_queues, both of which should be done only under rntl lock. Unfortunately the i40evf_init_task did not hold the rtnl_lock as necessary. This patch adds the locking needed. Change-ID: Ib72a21c3ce22b71a226b16f9bbe0f5f8cc3e849b Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-25Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller4-5/+4
Conflicts: drivers/net/ethernet/intel/i40e/i40e_main.c Jeff Kirsher says: ==================== 40GbE Intel Wired LAN Driver Updates 2016-07-22 This series contains updates to i40e and i40evf. Heinrich Schuchardt found a possible null pointer being dereferenced in i40e_debug_aq(), fixed the issue by doing the variable assignment after we are sure the pointer is not null. Avinash fixed an issue when link was down, we were not showing the correct advertised link modes. Mitch cleans up a useless initializer since the variable is assigned right away. Refactors the receive filter handling to properly track filter adds and deletes so the driver will not lose filters during a reset and up/down cycles. Also added a tracking mechanism so that the driver knows when to enter and leave promiscuous mode. Catherine removes a device id which is not needed (or used). Moves a mutex lock since we need to lock the client list around the i40e_client_release() call to prevent the release from interrupting the client instances while they are being added. Joshua adds Hyper-V specific VF device ids. Amitoj Kaur Chawla cleans up a redundant memset() call before a memcpy(). Stefan Assmann adds the missing link advertise for some x710 NICs. Tushar Dave fixes and issue found on SPARC, where a PF reset clears MAC filters and if a platform-specific MAC address is used, the driver has to explicitly write default MAC address to MAC filters otherwise all incoming traffic destined to the default MAC address will be dropped after reset. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-13/+17
Just several instances of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-22i40e/i40evf-bump version to 1.6.11Bimmy Pujari1-1/+1
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40evf: add hyperv dev idsJoshua Hay1-0/+2
This patch adds the Hyper-V specific VF device ids. Change-ID: I9c4fe6d8dfd34f7f68ebc9fdae225c8768439c89 Signed-off-by: Joshua Hay <joshua.a.hay@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e: Remove device ID 0x37D4Catherine Sullivan2-2/+0
This device ID is not needed, so take it out. Change-ID: I148d29f68a1f58b03980ecd83047a1b440f4f74d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-22i40e/i40evf: remove useless initializerMitch Williams1-2/+1
This initializer isn't needed because the variable is assigned right away. Change-ID: I6ce3edb3f4e0364db248a7a0bcc62ca95c01d941 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-07-14i40e/i40evf: Fix i40e_rx_checksumAlexander Duyck1-13/+17
There are a couple of issues I found in i40e_rx_checksum while doing some recent testing. As a result I have found the Rx checksum logic is pretty much broken and returning that the checksum is valid for tunnels in cases where it is not. First the inner types are not the correct values to use to test for if a tunnel is present or not. In addition the inner protocol types are not a bitmask as such performing an OR of the values doesn't make sense. I have instead changed the code so that the inner protocol types are used to determine if we report CHECKSUM_UNNECESSARY or not. For anything that does not end in UDP, TCP, or SCTP it doesn't make much sense to report a checksum offload since it won't contain a checksum anyway. This leaves us with the need to set the csum_level based on some value. For that purpose I am using the tunnel_type field. If the tunnel type is GRENAT or greater then this means we have a GRE or UDP tunnel with an inner header. In the case of GRE or UDP we will have a possible checksum present so for this reason it should be safe to set the csum_level to 1 to indicate that we are reporting the state of the inner header. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40e/i40evf: Bump version from 1.5.16 to 1.6.4Bimmy Pujari1-2/+2
Signed-off-by: Bimmy Pujari <bimmy.pujari@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40evf: always activate correct MAC address filterMitch Williams1-1/+1
Always add MAC address at the tail of the MAC filter list. Since the device's "real" MAC address is added first, it will always be at the beginning of the list. This prevents an issue where the "real" MAC filter might not get added if too many other filters are added before bringing the interface up. Change-ID: I34a8aeebeb0cb87a44b24118adc4176c7b943c1c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-06-27i40evf: don't overflow bufferMitch Williams1-0/+8
If the user adds an obscene amount of MAC addresses, the driver will run into the situation where it has too many address requests to fit into a single PF message. The driver checks for this case, and calculates the maximum number of messages that it can send. Then it completely ignores this count and overflows the buffer. Fix this by checking the address count and bailing out of the loop at the appropriate time. Change-ID: If8dcbb04602c75941dc0cd8309065e1de9ca791c Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-20intel: Add support for IPv6 IP-in-IP offloadAlexander Duyck2-0/+2
This patch adds support for offloading IPXIP6 type packets that represent either IPv4 or IPv6 encapsulated inside of an IPv6 outer IP header. In addition with this change we should also be able to support FOU encapsulated traffic with outer IPv6 headers. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-20net: define gso types for IPx over IPv4 and IPv6Tom Herbert2-4/+2
This patch defines two new GSO definitions SKB_GSO_IPXIP4 and SKB_GSO_IPXIP6 along with corresponding NETIF_F_GSO_IPXIP4 and NETIF_F_GSO_IPXIP6. These are used to described IP in IP tunnel and what the outer protocol is. The inner protocol can be deduced from other GSO types (e.g. SKB_GSO_TCPV4 and SKB_GSO_TCPV6). The GSO types of SKB_GSO_IPIP and SKB_GSO_SIT are removed (these are both instances of SKB_GSO_IPXIP4). SKB_GSO_IPXIP6 will be used when support for GSO with IP encapsulation over IPv6 is added. Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-13i40e: Add allmulti support for the VFAnjali Singhai Jain3-3/+30
This patch enables a feature to enable/disable all multicast for a trusted VF. Change-Id: I926eba7f8850c8d40f8ad7e08bbe4056bbd3985f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: Allocate Rx buffers properlyMitch Williams1-4/+1
Allocate the correct number of RX buffers, and don't fiddle with next_to_use. The common RX code handles all of this. This fixes a memory leak of one page each time the driver is opened. Change-Id: Id06eca353086e084921f047acad28c14745684ee Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove unused hardware receive descriptor codeJesse Brandeburg1-14/+10
The hardware supports a 16 byte descriptor for receive, but the driver was never using it in production. There was no performance benefit to the real driver of 16 byte descriptors, so drop a whole lot of complexity while getting rid of the code. Also since the previous patch made us use no-split mode all the time, drop any support in the driver for any other value in dtype and assume it is always zero (aka no-split). Hooray for code removal! Change-ID: I2257e902e4dad84a07b94db6d2e6f4ce69b27bc0 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: refactor receive routineJesse Brandeburg5-513/+481
This is part 2 of the Rx refactor series, just including changes to i40evf. This refactor aligns the receive routine with the one in ixgbe which was highly optimized. This reduces the code we have to maintain and allows for (hopefully) more readable and maintainable RX hot path. In order to do this: - consolidate the receive path into a single function that doesn't use packet split but *does* use pages for Rx buffers. - remove the old _1buf routine - consolidate several routines into helper functions - remove VF ethtool control over packet split - remove priv_flags interface since it is unused Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40evf: Drop packet split receive routineJesse Brandeburg6-74/+2
As part of preparation for the rx-refactor, remove the packet split receive routine and ancillary code. Some of the split related context set up code stays in i40e_virtchnl_pf.c in case an older VF driver tries to load and still wants to use packet split. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Remove reference to ring->dtypeJesse Brandeburg1-1/+0
As part of the rx-refactor, the dtype variable in the i40e_ring struct is no longer used, so remove it. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-05i40e/i40evf: Refactor tunnel interpretationJesse Brandeburg1-7/+6
Refactor the interpretation of a tunnel. This removes some code and lets us start using the hardware's parsing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40e/i40evf: Add support for GSO partial with UDP_TUNNEL_CSUM and GRE_CSUMAlexander Duyck2-3/+14
This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support segmentation for frames with checksums enabled in outer headers. As a result we can now send data over these types of tunnels at over 20Gb/s versus the 12Gb/s that was previously possible on my system. The advantage with the i40e parts is that this offload is mostly transparent as the hardware still deals with the inner and/or outer IPv4 headers so the IP ID is still incrementing for both when this offload is performed. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-01i40evf: make use of BIT() macro to avoid signed left shiftJacob Keller1-22/+22
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.