aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igc/igc_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-05-22igc: Fix NFC rules restorationAndre Guedes1-7/+9
When network interface is brought up, the driver re-enables the NFC rules previously configured. However, this is done in reverse order the rules were added and hardware filters are configured differently. For example, consider the following rules: $ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:AA queue 0 $ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:BB queue 1 $ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:CC queue 2 $ ethtool -N eth0 flow-type ether dst 00:00:00:00:00:DD queue 3 RAL/RAH registers are configure so filter index 1 has address ending with AA, filter index 2 has address ending in BB, and so on. If we bring the interface down and up again, RAL/RAH registers are configured so filter index 1 has address ending in DD, filter index 2 has CC, and so on. IOW, in reverse order we had before bringing the interface down. This issue can be fixed by traversing adapter->nfc_rule_list in backwards when restoring the rules. Since hlist doesn't support backwards traversal, this patch replaces it by list_head and fixes igc_restore_nfc_rules() accordingly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-22igc: Fix NFC rules with multicast addressesAndre Guedes1-6/+0
Multicast MAC addresses are valid address for NFC rules but igc_add_mac_filter() is currently rejecting them. In fact, the I225 controller doesn't impose any constraint on the address value so this patch gets rid of the address validation check in MAC filter APIs. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21igc: Align terms used in NFC support codeAndre Guedes1-21/+21
The Network Flow Classification (NFC) support code from IGC driver uses terms such as 'rule', 'filter', 'entry', 'input' interchangeably when referring to NFC rules, making it harder to follow the code. This patch renames IGC's internal APIs, structs, and variables so we stick with the term 'rule' since this is the term used in ethtool APIs. It also removes some not applicable comments along the way. No functionality is changed by this patch. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21igc: Add 'igc_ethtool_' prefix to functions in igc_ethtool.cAndre Guedes1-1/+1
This patch adds the prefix 'igc_ethtool_' to all functions defined in igc_ethtool.c so they align with the name convention already followed by other parts of the driver (e.g. igc_tsn, igc_ptp). Also, this avoids some name clashing with functions added to igc_main.c by upcoming patches in this series. No functionality is changed by this patch, just function renaming. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21igc: Get rid of igc_max_channels()Andre Guedes1-6/+1
The local function igc_max_channels() is a pointless wrapper around igc_get_max_rss_queues(). This patch removes it and updates the callers accordingly. It also does some cleanup on igc_get_max_rss_queues(). Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-21igc: Add support for source address filters in coreAndre Guedes1-16/+33
This patch extends MAC address filter internal APIs igc_add_mac_filter() and igc_del_mac_filter(), as well as local helpers, to support filters based on source address. A new parameters 'type' is added to the APIs to indicate if the filter type is source or destination. In case it is source type, the RAH register is configured accordingly in igc_set_mac_filter_hw(). Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-20igc: Remove mac_table from igc_adapterAndre Guedes1-37/+20
In igc_adapter we keep a sort of shadow copy of RAL and RAH registers. There is not much benefit in keeping it, at the cost of maintainability, since adding/removing MAC address filters is not hot path, and we already keep filters information in adapter->nfc_filter_list for cleanup and restoration purposes. So in order to simplify the MAC address filtering code and prepare it for source address support, this patch removes the mac_table from igc_adapter. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-20igc: Remove IGC_MAC_STATE_SRC_ADDR flagAndre Guedes1-19/+8
MAC address filters based on source address are not currently supported by the IGC driver. Despite of that, the driver have some dangling code to handle it, inherited from IGB driver. This patch removes that code to prepare for a follow up patch that adds proper source MAC address filter support. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-19igc: Refactor ethertype filtering codeAndre Guedes1-0/+93
The whole ethertype filtering code is implemented in igc_ethtool.c and mixes logic from ethtool and core parts. This patch refactors it so core logic is moved to igc_main.c, aligning the ethertype filtering code organization with the rest of the filtering code from the driver (MAC address and VLAN priority). Besides moving code to igc_main.c, this patch also does some minor improvements to the code. Below are some highlights. In case all filters are already in use and the user tries to add another filter, we return -ENOSPC instead of -EINVAL so a more meaningful error code is provided. This also aligns with the behavior implemented in MAC address filtering code. With this code refactoring, 'etype_bitmap' array in struct igc_adapter and 'etype_reg_index' in struct igc_nfc_filter are not needed anymore and are removed. Log messages are added to help debugging the ethertype filtering code. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-19igc: Refactor VLAN priority filtering codeAndre Guedes1-0/+52
The whole VLAN priority filtering code is implemented in igc_ethtool.c and mixes logic from ethtool and core parts. This patch refactors it so core logic is moved to igc_main.c, aligning the VLAN priority filtering code organization with the MAC address filtering code. This patch also takes the opportunity to add some log messages to ease debugging. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-19igc: remove IGC_REMOVED functionVitaly Lifshits1-3/+0
igc driver has leftovers from the previous device that supported Virtualization. This can be found in the function IGC_REMOVED which became obsolete, and can be removed. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-18igc: add support to eeprom, registers and link self-testsVitaly Lifshits1-2/+2
Introduced igc_diag.c and igc_diag.h, these files have the diagnostics functionality of igc driver. For the time being these files are being used by ethtool self-test callbacks. Which mean that eeprom, registers and link self-tests for ethtool were implemented. Signed-off-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-18igc: Use netdev log helpers in igc_main.cAndre Guedes1-61/+50
In igc_main.c we print log messages using both dev_* and netdev_* helpers, generating inconsistent output. Since this is a network device driver, we should preferably use netdev_* helpers because they append the interface name to the message, helping making sense out of the logs. This patch converts all dev_* calls to netdev_*. There is only two exceptions: 1) calls wihtin igc_probe (net_device has not been registered yet) 2) calls in igc_init_module (module initialization). It also takes this opportunity to improve some messages. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-05-18igc: Add ECN support for TSOSasha Neftin1-0/+1
Align with other Intel drivers and add ECN support for TSO. Add NETIF_F_TSO_ECN flag Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-24PM: sleep: core: Rename DPM_FLAG_NEVER_SKIPRafael J. Wysocki1-1/+1
Rename DPM_FLAG_NEVER_SKIP to DPM_FLAG_NO_DIRECT_COMPLETE which matches its purpose more closely. No functional impact. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Bjorn Helgaas <bhelgaas@google.com> # for PCI parts Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com>
2020-04-19igc: Add debug messages to MAC filter codeAndre Guedes1-2/+22
This patch adds log messages to functions related to the MAC address filtering code to ease debugging. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Refactor igc_del_mac_filter()Andre Guedes1-26/+19
This patch does a code refactoring in igc_del_mac_filter() so it uses the new helper igc_find_mac_filter() and improves the comment about the special handling when deleting the default filter. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Refactor igc_mac_entry_can_be_used()Andre Guedes1-33/+47
The helper igc_mac_entry_can_be_used() implementation is a bit convoluted since it does two different things: find a not-in-use slot in mac_table or find an in-use slot where the address and address type match. This patch does a code refactoring and break it up into two helper functions. With this patch we might traverse mac_table twice in some situations, but this is not harmful performance-wise (mac_table has only 16 entries and adding mac filters is not hot-path), and it improves igc_add_mac_ filter() readability considerably. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove igc_*_mac_steering_filter() wrappersAndre Guedes1-16/+4
With the previous two patches, igc_add_mac_steering_filter() and igc_del_mac_steering_filter() became a pointless wrapper of igc_add_mac_filter() and igc_del_mac_filter(). This patch removes these wrappers and update callers to call igc_add_mac_filter() and igc_del_mac_filter() directly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove IGC_MAC_STATE_QUEUE_STEERINGAndre Guedes1-13/+19
The IGC_MAC_STATE_QUEUE_STEERING bit in mac_table[i].state is utilized to indicate that frames matching the filter are assigned to mac_table[i].queue. This bit is not strictly necessary since we can convey the same information as follows: queue == -1 means queue assignment is disabled, otherwise it is enabled. In addition to make the code simpler, this change fixes some awkward situations where we pass a complete misleading 'queue' value such as in igc_uc_sync(). So this patch removes IGC_MAC_STATE_QUEUE_STEERING and also takes the opportunity to improve the igc_add_mac_filter documentation. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove 'queue' check in igc_del_mac_filter()Andre Guedes1-14/+11
igc_add_mac_filter() doesn't allow us to have more than one entry with the same address and address type in adapter->mac_table so checking if 'queue' matches in igc_del_mac_filter() isn't necessary. This patch removes that check. This patch also takes the opportunity to improve the igc_del_mac_filter documentation and remove comment which is not applicable to this I225 controller. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Improve address check in igc_del_mac_filter()Andre Guedes1-1/+1
igc_add_mac_filter() doesn't allow filters with invalid MAC address to be added to adapter->mac_table so, in igc_del_mac_filter(), we can early return if MAC address is invalid. No need to traverse the table. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Refactor igc_rar_set_index()Andre Guedes1-31/+42
Current igc_rar_set_index() implementation is a bit convoluted so this patch does some code refactoring to improve it. The helper igc_rar_set_index() is about writing MAC filter settings into hardware registers. Logic such as address validation belongs to functions upper in the call chain such as igc_set_mac() and igc_add_mac_filter(). So this patch moves the is_valid_ether_addr() call to igc_add_mac_filter(). No need to touch igc_set_mac() since it already checks it. The variables 'rar_low' and 'rar_high' represent the value in registers RAL and RAH so we rename them to 'ral' and 'rah', respectively, to match the registers names. To make it explicit, filter settings are passed as arguments to the function instead of reading them from adapter->mac_table "under the hood". Also, the function was renamed to igc_set_mac_filter_hw to make it more clear what it does. Finally, the patch removes some wrfl() calls and comments not needed. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Fix igc_uc_unsync()Andre Guedes1-3/+1
In case igc_del_mac_filter() returns error, that error is masked since the functions always return 0 (success). This patch fixes igc_uc_unsync() so it returns whatever value igc_del_mac_filter() returns (0 on success, negative number on error). Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Change igc_add_mac_filter() returning valueAndre Guedes1-5/+2
In case of success, igc_add_mac_filter() returns the index in adapter->mac_table where the requested filter was added. This information, however, is not used by any caller of that function. In fact, callers have extra code just to handle this returning index as 0 (success). So this patch changes the function to return 0 on success instead, and cleans up the extra code. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Check unsupported flag in igc_add_mac_filter()Andre Guedes1-0/+2
The IGC_MAC_STATE_SRC_ADDR flags is not supported by igc_add_mac_ filter() so this patch adds a check for it and returns -ENOTSUPP in case it is set. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Remove duplicate code in MAC filtering logicAndre Guedes1-99/+13
This patch does a code refactoring in the MAC address filtering logic to get rid of some duplicate code. IGC driver has two functions to add MAC address filters that are pretty much the same: igc_add_mac_filter() and igc_add_mac_filter_flags(). The only difference is that the latter allows the callee to specify the 'flags' parameter while the former has it hard coded as zero. The same rationale applies to filter deletion counterparts. So this patch refactors igc_add_mac_filter() and igc_del_mac_filter() so they handle the 'flags' parameters, removes the _flags() functions, and fixes callees accordingly. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-19igc: Add new device IDs for i225 partSasha Neftin1-0/+3
Add new device IDs for the next step of i225 Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Fix default MAC address filter overrideAndre Guedes1-0/+2
This patch fixes a bug when the user adds the first MAC address filter via ethtool NFC mechanism. When the first MAC address filter is added, it overwrites the default MAC address filter configured at RAL[0] and RAH[0]. As consequence, frames addressed to the interface MAC address are not sent to host anymore. This patch fixes the bug by calling igc_set_default_mac_filter() during adapter init so the position 0 of adapter->mac_table[] is assigned to the default MAC address. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Remove dead code related to flower filterAndre Guedes1-3/+0
IGC driver has no support for tc-flower filters so this patch removes some leftover code, probably copied from IGB driver by mistake. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Fix NFC queue redirection supportAndre Guedes1-3/+8
The support for ethtool Network Flow Classification (NFC) queue redirection based on destination MAC address is currently broken in IGC. For instance, if we add the following rule, matching frames aren't enqueued on the expected rx queue. $ ethtool -N IFNAME flow-type ether dst 3c:fd:fe:9e:7f:71 queue 2 The issue here is due to the fact that igc_rar_set_index() is missing code to enable the queue selection feature from Receive Address High (RAH) register. This patch adds the missing code and fixes the issue. Signed-off-by: Andre Guedes <andre.guedes@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Remove copper fiber switch controlSasha Neftin1-9/+0
i225 device support copper mode only PHY signal detect indication for copper fiber switch not applicable to i225 part Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Enable NETIF_F_HW_TC flagSasha Neftin1-0/+1
This assignment of the feature NETIF_F_HW_TC occurs prior to the initial setup of the local hw_features variable. This ensures that NETIF_F_HW_TC are marked as user changeable, and also enables it by default when the driver loads. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add support for ETF offloadingVinicius Costa Gomes1-3/+67
This adds support for ETF offloading for the i225 controller. For i225, the LaunchTime feature is almost a subset of the Qbv feature. The main change from the i210 is that the launchtime of each packet is specified as an offset applied to the BASET register. BASET is automatically incremented each cycle. For i225, the approach chosen is to re-use most of the setup used for taprio offloading. With a few changes: - The more or less obvious one is that when ETF is enabled, we should set add the expected launchtime to the (advanced) transmit descriptor; - The less obvious, is that when taprio offloading is not enabled, we add a dummy schedule (all queues are open all the time, with a cycle time of 1 second). Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add support for taprio offloadingVinicius Costa Gomes1-0/+113
Adds support for translating taprio schedules into i225 cycles. This will allow schedules to run in the hardware, making the schedules enforcement more precise and saving CPU time. Right now, the only simple schedules are allowed, complex schedules are rejected. "simple" in this context are schedules that each HW queue is opened and closed only once in each cycle. Changing schedules is still not supported as well. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Andre Guedes <andre.guedes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-04-17igc: Add GSO partial supportSasha Neftin1-0/+10
Partial generic segmentation offload is a hybrid between TSO and GSO. What is effectively does is take advantage of certain traits of TCP and tunnels so that instead of having to rewrite the packet headers for each segment only in the inner-most transport header and possible the outer-most network header need to be updated. This allows devices that do not support tunnel offload or tunnels offloads with checksum to still make use of segmentation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add WOL supportSasha Neftin1-0/+10
This patch adds a define and WOL support for an i225 parts. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add pcie error handler supportSasha Neftin1-0/+103
Add pcie error detection, slot reset and resume capability Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add basic skeleton for PTPSasha Neftin1-0/+2
commit 5f2958052c58 ("igc: Add basic skeleton for PTP") added basic support for PTP, what's missing is support for suspending. Legacy power management has been added. Now we can add the suspend method to the igc_shutdown. By cleaning the runtime storage for timestamp this avoids a possible invalid memory access when the system comes back from suspend state. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Add dump optionsSasha Neftin1-0/+2
Placeholder for debugging functionality. In this patch, we add some registers and rings summary dumps. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-02-19igc: Complete to commit Add legacy power management supportSasha Neftin1-0/+27
commit 9513d2a5dc7f ("igc: Add legacy power management support") Add power management resume and schedule suspend requests. Add power management get and put synchronization. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Add support for TSOSasha Neftin1-1/+112
TCP segmentation offload allows a device to segment a single frame into multiple frames with a data payload size specified in socket buffer. As a result we can now send data approximately up to seven percents fast than was previously possible on my system. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Add SKU for i225 deviceSasha Neftin1-0/+1
Add support for blank NVM SKU Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-17igc: Fix typo in a commentSasha Neftin1-1/+1
Fix typo in a context descriptor comment Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for TX timestampingVinicius Costa Gomes1-0/+50
This adds support for timestamping packets being transmitted. Based on the code from i210. The basic differences is that i225 has 4 registers to store the transmit timestamps (i210 has one). Right now, we only support retrieving from one register, support for using the other registers will be added later. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add support for RX timestampingVinicius Costa Gomes1-0/+10
This adds support for timestamping received packets. It is based on the i210, as many features of i225 work the same way. The main difference from i210 is that i225 has support for choosing the timer register to use when timestamping packets. Right now, we only support using timer 0. The other difference is that i225 stores two timestamps in the receive descriptor, right now, we only retrieve one. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-06igc: Add basic skeleton for PTPVinicius Costa Gomes1-0/+27
This allows the creation of the /dev/ptpX device for i225, and reading and writing the time. Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_sw_initSasha Neftin1-743/+740
We want to avoid forward-declarations of function if possible. Rearrange the igc_sw_init function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_write_itrSasha Neftin1-17/+16
We want to avoid forward-declarations of function if possible. Rearrange the igc_write_itr function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-04igc: Remove no need declaration of the igc_assign_vectorSasha Neftin1-62/+61
We want to avoid forward-declarations of function if possible. Rearrange the igc_assign_vector function implementation. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.