aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-27/+2
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-09ixgbe: Clear SWFW_SYNC register during initEmil Tantilov1-7/+12
Added clearing of SW resource bits in the SW/FW synchronization register to ixgbe_init_swfw_sync_X540(). Updated ixgbe_acquire_swfw_sync_X540 SW Manageability host interface resource bit error case to match the error handling of the other SW resource bits. Which is to release the SW resource bits if SW times out while attempting to acquire the resource. This allows the driver to load in cases where the semaphore bits could be stuck after a reset or a crash. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-28ixgbe: Acquire PHY semaphore before device resetPaul Greenwalt1-0/+8
A recent firmware change fixed an issue to acquire the PHY semaphore before accessing PHY registers. This led to a case where SW can issue a device reset clearing the MDIO registers. This patch makes SW acquire the PHY semaphore before issuing a device reset. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Remove unused firmware version functions and methodMark Rustad1-1/+0
The firmware version method and functions are not used anywhere, so remove them all. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-01-03ixgbe: Add bounds check for x540 LED functionsTony Nguyen1-2/+7
This is an extension of commit 003287e0f087 ("ixgbevf: Correct parameter sent to LED function"); add bounds checking to x540 functions to ensure the index is valid. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-04ixgbe: Add X553 PHY FC autoneg supportDon Skidmore1-0/+1
This patch adds X553 flow control auto negotiation for fiber and backplain. To enable this new function pointers were added as well as creating a function to dynamically set function pointer we can't define only on MAC type. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-04ixgbe: Add support to retrieve and store LED link activeDon Skidmore1-0/+1
This patch adds support to get the LED link active via the LEDCTL register. If the LEDCTL register does not have LED link active (LED mode field = 0x0100) set then default LED link active returned. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use BIT() macroJacob Keller1-2/+2
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Place SWFW semaphore in known valid state at probeDon Skidmore1-0/+20
It is possible on some HW that a system reset could occur when we are holding the SWFW semaphore lock. So next time the driver was loaded we would see it incorrectly as locked. This patch will recover from that state by: Attempting to acquire the semaphore and then regardless of whether or not it was acquire we immediately release it. This will force us into a known good state. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Fix flow control for Xeon D KR backplaneMark Rustad1-0/+1
Xeon D KR backplane is different from other backplanes, in that we can't use auto-negotiation to determine the mode. Instead, use whatever the user configured. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-04ixgbe: Make all unchanging ops structures constMark Rustad1-5/+5
The source for the ops structure contents are const, so make them so. Copy them in place with structure assignments instead of memcpys. Make the mbx_ops accessed by reference instead of making a copy of the source structure. Update copyright date on the touched files. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Julia Lawall <julia.lawall@lip6.fr> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-12ixgbe: Clear stale pool mappingsAlexander Duyck1-3/+7
This patch makes certain that we clear the pool mappings added when we configure default MAC addresses for the interface. Without this we run the risk of leaking an address into pool 0 which really belongs to VF 0 when SR-IOV is enabled. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Always turn PHY power on when requestedMark Rustad1-2/+1
Instead of inhibiting PHY power control when manageability is present, only inhibit turning PHY power off when manageability is present. Consequently, PHY power will always be turned on when requested. Without this patch, some systems with X540 or X550 devices in some conditions will never get link. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-03ixgbe: Correct spec violations by waiting after resetMark Rustad1-1/+2
The ixgbe driver was violating the specification in the datasheet by not waiting 1ms before checking for the reset bit clearing. This is called out for devices supported by ixgbe, so implement the required delay. Reported-by: Dan Streetman <dan.streetman@canonical.com> Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Darin Miller <darin.j.miller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Correct error path in semaphore handlingMark Rustad1-0/+5
The timeout path is supposed to release the semaphore, so do that. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-23ixgbe: Add I2C bus mux supportMark Rustad1-36/+61
Take control of an I2C mux that selects which SFP is attached to the I2C bus. The control of the mux is captured in the taking and releasing of the related semaphore. Because only port 1 can control the mux, port 1 always leaves the mux set to select port 0. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-01ixgbe: Assign set_phy_power dynamically where neededDon Skidmore1-0/+5
There are various reasons why this method may or may not need to be defined and some of these we don't know until runtime. So we will set the value in get_invariants. Signed-off-by: Donald C Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: Add a PHY power state methodDon Skidmore1-0/+1
This new method will control the PHY power state. You pass in the state you wish to change to (ether on or off). For cases where this method is not used the current PHY power state behavior is maintained. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-06-09ixgbe: add array of MAC type dependent valuesDon Skidmore1-18/+23
Some of the register addresses and format where unfortunately changed between MAC types. To get around this we add a const u32 *mvals pointer to the ixgbe_hw struct to point to an array of mac-type-dependent values. These can include register offsets, masks, whatever can be in a u32. When the ixgbe_hw struct is initialized, a pointer to the appropriate array must be set. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-05-04ixgbe: Release semaphore bits in the right orderMark Rustad1-4/+4
The global semaphore bits should be released in the reverse of the order that they were taken, so correct that. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-13ixgbe: add new wrapper for X550 supportDon Skidmore1-0/+2
For the X550 mac type we have to do additional steps around enabling/disabling Rx. This patch will add a layer of indirection around these support functions to enable this. CC: <kernel-team@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-05ixgbe: Cleanup probe to remove redundant attempt to ID PHYDon Skidmore1-3/+0
We always identify the PHY in our reset_hw path anyway so there is no need to do it in get_invariants(). The reason I even noticed this is that for new hardware (X550em) we don't assign some methods until later in probe and calling phy.ops.read_reg could lead to a panic. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add X550 support function pointersDon Skidmore1-14/+12
This patch extends the function pointer structure to include the new X550 class MAC types. This creates a new file ixgbe_x550.c that contains all of the new methods. Because of similarities to the X540 part in some cases we just use it's methods where they can be used without any modification. These exported functions are now defined in the new ixgbe_x540.h file. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: cleanup checksum to allow error resultsDon Skidmore1-19/+40
Currently the shared code checksum calculation function only returns a u16 and cannot return an error code. Unfortunately a variety of errors can happen that completely prevent the calculation of a checksum. So, change the function return value from a u16 to an s32 and return a negative value on error, or the positive checksum value when there is no error. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-05ixgbe: Add x550 SW/FW semaphore supportDon Skidmore1-4/+4
The X550 hardware will use more bits in the mask, so change the prototypes to match. This larger mask will require changes in callers which use the higher bits. Likewise since X550 will use different semaphore mask values and will use the lan_id value. So save these values in the ixgbe_phy_info struct. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Make return values more directMark Rustad1-18/+12
Make return values more direct, eliminating some gotos and otherwise unneeded conditionals. This also eliminates some local variables. Also a few minor cleanups in affected code so checkpatch won't complain. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Delete a bunch of dead codeMark Rustad1-27/+0
All of the code involved with returning the supported physical layer is actually unused, so delete it. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Correct X540 semaphore errorMark Rustad1-18/+16
In the function ixgbe_get_swfw_sync_semaphore, an incorrect check was treating success as failure and vice-versa. This led to manipulating the IXGBE_SWFW_SYNC register without holding the software semaphore first, which is an error. In addition, if getting the REGSMP bit in the IXGBE_SW_FW_SYNC register timed out, no error code would be returned, making the caller think that it had successfully acquired the lock. Fix both of those issues and clean up the function a bit, such as make the name in the comment match the function. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Fix spurious release of semaphore in EEPROM accessMark Rustad1-70/+53
Failure to acquire the semaphore would lead to a spurious release of the semaphore in several functions. Do not release a semaphore that you did not get. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-25ixgbe: Convert some udelays to usleep_rangeMark Rustad1-2/+2
Convert some udelay calls to the preferred usleep_range. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: fix several concatenated strings to single lineJacob Keller1-2/+1
This patch fixes various log strings that are split over multiple lines in the ixgbe driver. This cleans up checkpatch.pl warnings, and makes it easier to search the code for warning strings displayed to the kernel log. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-05-23ixgbe: clean up checkpatch warnings about CODE_INDENT and LEADING_SPACEJacob Keller1-7/+7
The contents of this patch were originally generated by "scripts/checkpatch.pl --fix-inplace --types CODE_INDENT,LEADING_SPACE drivers/net/ethernet/ixgbe/*.[ch]", and then hand verified for consistency. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-20ixgbe: Stop cacheing if the MNG FW enabledDon Skidmore1-1/+0
We use to cache whether the MNG FW was enabled, how since this isn't static we really need to verify with each check. This patch makes that change. CC: Arun Sharma <asharma@fb.com> Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: add Linux NICS mailing list to contact infoJacob Keller1-0/+1
This patch updates the contact information on the ixgbe driver files so that every file includes the Linux NICS address, as it is still used, but only a few of the files mentioned it. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-03-12ixgbe: move setting rx_pb_size into get_invariantsJacob Keller1-1/+1
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-02-28ixgbe: collect all 82599 AUTOC code in one functionDon Skidmore1-0/+2
When reading or writing to the AUTOC register on 82599 devices we need to preform various operations that aren't needed for other MAC types. This patch will collect all of that code into one place to minimize MAC checks in common code paths. While doing this I also clean up some cases where we weren't holding the SW/FW semaphore during a read/modify/write of AUTOC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-01ixgbe: Cleanup the use of tabs and spacesJeff Kirsher1-6/+6
Cleans up the whitespace issues noticed during code review where a mix of tabs and spaces were used for indentation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-17ixgbe: fix MNG FW support when adapter not upDon Skidmore1-0/+1
We were only turning the laser on when the adapter was up. This causes issues for those who wanted to access the MNG FW while the port was in a down state. This patch makes sure the laser is turned on in probe and remain up even after the port is brought down. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: allow reading of SFF-8472 data over i2cEmil Tantilov1-0/+1
This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume <footplus@gmail.com> CC: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-01-31ixgbe: autoneg variable refactoringJosh Hay1-3/+2
Removes the autoneg parameter from the setup_link functions. Adds local variable autoneg to setup_link functions to be passed to get_link_capabilities functions if needed. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2013-01-31ixgbe: removed unused variable from setup_link_speedJosh Hay1-1/+1
Removes the autoneg parameter from the setup_link_speed functions. These functions do nothing with this parameter. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-12-06ixgbe: Use is_valid_ether_addrJoe Perches1-1/+1
Use the normal kernel test instead of a module specific one. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-07-19ixgbe: Correctly set SAN MAC RAR pool to default pool of PFAlexander Duyck1-0/+4
This change corrects an issue in which an FCoE enabled adapter was always setting the FCoE SAN MAC MPSAR register to 0x1. This results in the first VF being assigned the SAN MAC address in the case of SR-IOV and as such is incorrect. To resolve this I am adding a new function that will update the SAN MAC pool address after reset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-02ixgbe: add hwmon interface to export thermal dataDon Skidmore1-0/+2
Some of our adapters have thermal data available, this patch exports this data via hwmon sysfs interface. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-14ixgbe: Fix race condition where RX buffer could become corrupted.Atita Shirwaikar1-0/+2
There was a race condition in the reset path where the RX buffer could become corrupted during Fdir configuration.This is due to a HW bug.The fix right now is to lock the buffer while we do the fdir configuration.Since we were using similar workaround for another bug, I moved the existing code to a function and reused it.HW team also recommended that IXGBE_MAX_SECRX_POLL value be changed from 30 to 40.The erratum for this bug will be published in the next release 82599 Spec Update Signed-off-by: Atita Shirwaikar <atita.shirwaikar@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13drivers/net: Remove boolean comparisons to true/falseJoe Perches1-1/+1
Booleans should not be compared to true or false but be directly tested or tested with !. Done via cocci script: @@ bool t; @@ - t == true + t @@ bool t; @@ - t != true + !t @@ bool t; @@ - t == false + !t @@ bool t; @@ - t != false + t Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-03ixgbe: update copyright to 2012Don Skidmore1-1/+1
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-11-16ixgbe: fix LED blink logic to check for linkEmil Tantilov1-7/+11
Previously the driver would force link without checking whether the link was already established. This caused some inconsistencies in the LED blink rate. Do not force link if link is already up. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-05ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599Emil Tantilov1-0/+1
82598 and 82599 do not ship with this type of PHY Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.