aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbevf (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-09-23ixgbevf: remove ndo_poll_controllerEric Dumazet1-21/+0
As diagnosed by Song Liu, ndo_poll_controller() can be very dangerous on loaded hosts, since the cpu calling ndo_poll_controller() might steal all NAPI contexts (for all RX/TX queues of the NIC). This capture can last for unlimited amount of time, since one cpu is generally not able to drain all the queues under load. ixgbevf uses NAPI for TX completions, so we better let core networking stack call the napi->poll() to avoid the capture. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13xdp: don't make drivers report attachment modeJakub Kicinski1-1/+0
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-06-12treewide: Use array_size() in vmalloc()Kees Cook1-3/+5
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-04ixgbevf: fix possible race in the reset subtaskEmil Tantilov1-2/+4
Extend the RTNL lock in ixgbevf_reset_subtask() to protect the state bits check in addition to the call to ixgbevf_reinit_locked(). This is to make sure that we get the most up-to-date values for the bits and avoid a possible race when going down. Suggested-by: Zhiping du <zhipingdu@tencent.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-06-04ixgbevf: Fix coexistence of malicious driver detection with XDPAlexander Duyck2-7/+30
In the case of the VF driver it is supposed to provide a context descriptor that allows us to provide information about the header offsets inside of the frame. However in the case of XDP we don't really have any of that information since the data is minimally processed. As a result we were seeing malicious driver detection (MDD) events being triggered when the PF had that functionality enabled. To address this I have added a bit of new code that will "prime" the XDP ring by providing one context descriptor that assumes the minimal setup of an Ethernet frame which is an L2 header length of 14. With just that we can provide enough information to make the hardware happy so that we don't trigger MDD events. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-17ixgbevf: fix MAC address changes through ixgbevf_set_mac()Emil Tantilov1-0/+1
Set hw->mac.perm_addr in ixgbevf_set_mac() in order to avoid losing the custom MAC on reset. This can happen in the following case: >ip link set $vf address $mac >ethtool -r $vf Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-17ixgbe/ixgbevf: Free IRQ when PCI error recovery removes the deviceMauro S M Rodrigues1-3/+3
Since commit f7f37e7ff2b9 ("ixgbe: handle close/suspend race with netif_device_detach/present") ixgbe_close_suspend is called, from ixgbe_close, only if the device is present, i.e. if it isn't detached. That exposed a situation where IRQs weren't freed if a PCI error recovery system opts to remove the device. For such case the pci channel state is set to pci_channel_io_perm_failure and ixgbe_io_error_detected was returning PCI_ERS_RESULT_DISCONNECT before calling ixgbe_close_suspend consequentially not freeing IRQ and crashing when the remove handler calls pci_disable_device, hitting a BUG_ON at free_msi_irqs, which asserts that there is no non-free IRQ associated with the device to be removed: BUG_ON(irq_has_action(entry->irq + i)); The issue is fixed by calling the ixgbe_close_suspend before evaluate the pci channel state. Reported-by: Naresh Bannoth <nbannoth@in.ibm.com> Reported-by: Abdul Haleem <abdhalee@in.ibm.com> Signed-off-by: Mauro S M Rodrigues <maurosr@linux.vnet.ibm.com> Reviewed-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11ixgbevf: fix ixgbevf_xmit_frame()'s return typeLuc Van Oostenryck1-1/+1
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, but the implementation in this driver returns an 'int'. Fix this by returning 'netdev_tx_t' in this driver too. Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher10-252/+14
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24ixgbevf: ensure xdp_ring resources are free'd on error exitColin Ian King1-1/+1
The current error handling for failed resource setup for xdp_ring data is a break out of the loop and returning 0 indicated everything was OK, when in fact it is not. Fix this by exiting via the error exit label err_setup_tx that will clean up the resources correctly and return and error status. Detected by CoverityScan, CID#1466879 ("Logically dead code") Fixes: 21092e9ce8b1 ("ixgbevf: Add support for XDP_TX action") Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add XDP queue stats reportingTony Nguyen1-0/+24
XDP stats are included in TX stats, however, they are not reported in TX queue stats since they are setup on different queues. Add reporting for XDP queue stats to provide consistency between the total stats and per queue stats. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add support for meta dataTony Nguyen1-4/+25
Add support for XDP meta data when using build skb. Based on commit 366a88fe2f40 ("bpf, ixgbe: add meta data support") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Delay tail write for XDP packetsTony Nguyen1-12/+18
Current XDP implementation hits the tail on every XDP_TX; change the driver to only hit the tail after packet processing is complete. Based on commit 7379f97a4fce ("ixgbe: delay tail write to every 'n' packets") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add support for XDP_TX actionTony Nguyen3-32/+294
This implements the XDP_TX action which is modeled on the ixgbe implementation. However instead of using CPU id to determine which XDP queue to use, this uses the received RX queue index, which is similar to i40e. Doing this eliminates the restriction that number of CPUs not exceed number of XDP queues that ixgbe has. Also, based on the number of queues available, the number of TX queues may be reduced when an XDP program is loaded in order to accommodate the XDP queues. Based largely on commit 33fdc82f0883 ("ixgbe: add support for XDP_TX action") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23ixgbevf: Add XDP support for pass and drop actionsTony Nguyen3-42/+178
Implement XDP_PASS and XDP_DROP based on the ixgbe implementation. Based largely on commit 924708081629 ("ixgbe: add XDP support for pass and drop actions"). Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher6-0/+6
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-12ixgbevf: fix unused variable warningArnd Bergmann1-5/+5
The new ixgbevf_set_rx_buffer_len() function causes a harmless warnings in configurations with large page size: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function 'ixgbevf_set_rx_buffer_len': drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1758:15: error: unused variable 'max_frame' [-Werror=unused-variable] This rephrases the code so that the compiler can see the use of that variable, making it slightly easier to read in the process. Fixes: f15c5ba5b6cd ("ixgbevf: add support for using order 1 pages to receive large frames") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: remove redundant initialization of variable 'dma'Colin Ian King1-1/+1
Variable dma is initialized with a value that is never read, later on it is re-assigned a new value, hence the initialization is redundant and can be removed. Cleans up clang warning: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:584:13: warning: Value stored to 'dma' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add build_skb supportEmil Tantilov1-0/+41
Add support for build_skb() similar to: commit 6f429223b31c ("ixgbe: Add support for build_skb") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: break out Rx buffer page managementEmil Tantilov1-113/+114
Based on commit e014272672b9 ("igb: Break out Rx buffer page management") Consolidate Rx code paths to reduce duplication when we expand them in the future. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: allocate the rings as part of q_vectorEmil Tantilov2-217/+182
Make it so that all rings allocations are made as part of q_vector. The advantage to this is that we can keep all of the memory related to a single interrupt in one page. The goal is to bring the logic of handling rings closer to ixgbe. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: make sure all frames fit minimum size requirementsEmil Tantilov1-5/+25
Similar to commit a50c29dd09ed ("ixgbe: Make certain that all frames fit minimum size requirements") Make sure that any packet we attempt to transmit will meet minimum size requirements. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add support for padding packetEmil Tantilov2-4/+39
Following the logic from commit 2de6aa3a666e ("ixgbe: Add support for padding packet") Add support for providing a buffer with headroom and tail room to allow for shared info, NET_SKB_PAD, and NET_IP_ALIGN. With this combined with the DMA changes we can start using build_skb to build frames around an incoming Rx buffer instead of having to memcpy the headers. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: setup queue countsEmil Tantilov1-15/+29
Add calls for netif_set_real_num_t/rx_queues() in ixgbevf_open(). Make sure that calls to ixgbevf_open() are rtnl protected and improve the error handling when setting up multiple queues. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add support for using order 1 pages to receive large framesEmil Tantilov2-24/+92
Based on commit 8649aaef4044 ("igb: Add support for using order 1 pages to receive large frames") Add support for using 3K buffers in order 1 page. We are reserving 1K for now to have space available for future tail room and head room when we enable build_skb support. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: add ethtool private flag for legacy RxEmil Tantilov2-0/+50
Introduce legacy-rx private flag that will allow switching between the old and new (build_skb based) Rx code paths. The implementation is the same as in commit e08912985b29 ("igb: Add support for ethtool private flag to allow use of legacy Rx") This provides a means of validating the legacy Rx path in the event that we are forced to fall back. At some point in the future when we are convinced we don't need it anymore we might be able to drop the legacy-rx flag. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-02-26ixgbevf: use page_address offset from pageEmil Tantilov1-6/+5
Based on commit 3456fd53421e ("igb: Use page_address offset from page instead of masking virtual address") Update the handling of page addresses so that we always refer to them using a void pointer, and try to use the consistent name of va indicating we are working with a virtual address. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: use ARRAY_SIZE for various array sizing calculationsColin Ian King1-10/+7
Use the ARRAY_SIZE macro on various arrays to determine size of the arrays. Improvement suggested by coccinelle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: don't bother clearing tx_buffer_info in ixgbevf_clean_tx_ring()Emil Tantilov1-43/+72
In the case of the Tx rings we need to only clear the Tx buffer_info when we are resetting the rings. Ideally we do this when we configure the ring to bring it back up instead of when we are taking it down in order to avoid dirtying pages we don't need to. In addition we don't need to clear the Tx descriptor ring since we will fully repopulate it when we begin transmitting frames and next_to_watch can be cleared to prevent the ring from being cleaned beyond that point instead of needing to touch anything in the Tx descriptor ring. Finally with these changes we can avoid having to reset the skb member of the Tx buffer_info structure in the cleanup path since the skb will always be associated with the first buffer which has next_to_watch set. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: improve performance and reduce size of ixgbevf_tx_map()Emil Tantilov1-25/+20
Based on commit ec718254cbfe ("ixgbe: Improve performance and reduce size of ixgbe_tx_map") This change is meant to both improve the performance and reduce the size of ixgbevf_tx_map(). Expand the work done in the main loop by pushing first into tx_buffer. This allows us to pull in the dma_mapping_error check, the tx_buffer value assignment, and the initial DMA value assignment to the Tx descriptor. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: clear rx_buffer_info in configure instead of cleanEmil Tantilov1-13/+13
Based on commit d2bead576e67 ("igb: Clear Rx buffer_info in configure instead of clean") This change makes it so that instead of going through the entire ring on Rx cleanup we only go through the region that was designated to be cleaned up and stop when we reach the region where new allocations should start. In addition we can avoid having to perform a memset on the Rx buffer_info structures until we are about to start using the ring again. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add counters for Rx page allocationsEmil Tantilov3-7/+25
We already had placehloders for failed page and buffer allocations. Added alloc_rx_page and made sure the stats are properly updated and exposed in ethtool. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: update code to better handle incrementing page countEmil Tantilov2-9/+28
Based on commit bd4171a5d4c2 ("igb: update code to better handle incrementing page count") Update the driver code so that we do bulk updates of the page reference count instead of just incrementing it by one reference at a time. The advantage to doing this is that we cut down on atomic operations and this in turn should give us a slight improvement in cycles per packet. In addition if we eventually move this over to using build_skb the gains will be more noticeable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add support for DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERINGEmil Tantilov2-22/+38
Based on commit 5be5955425c2 ("igb: update driver to make use of DMA_ATTR_SKIP_CPU_SYNC") and commit 7bd175928280 ("igb: Add support for DMA_ATTR_WEAK_ORDERING") Convert the calls to dma_map/unmap_page() to the attributes version and add DMA_ATTR_SKIP_CPU_SYNC/WEAK_ORDERING which should help improve performance on some platforms. Move sync_for_cpu call before we perform a prefetch to avoid invalidating the first 128 bytes of the packet on architectures where that call may invalidate the cache. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: use length to determine if descriptor is doneEmil Tantilov1-6/+8
Based on: commit 7ec0116c9131 ("igb: Use length to determine if descriptor is done") This change makes it so that we use the length of the packet instead of the DD status bit to determine if a new descriptor is ready to be processed. The obvious advantage is that it cuts down on reads as we don't really even need the DD bit if going from a 0 to a non-zero value on size is enough to inform us that the packet has been completed. In addition we only reset the Rx descriptor length for descriptor zero when resetting a ring instead of having to do a memset with 0 over the entire ring. By doing this we can save some time on initialization. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: only DMA sync frame lengthEmil Tantilov1-3/+4
Based on commit 64f2525ca4e7 ("igb: Only DMA sync frame length") On some architectures synching a buffer for DMA may be expensive. Instead of the entire 2K receive buffer only synchronize the length of the frame, which will typically be the MTU or smaller. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-26ixgbevf: add function for checking if we can reuse pageEmil Tantilov1-26/+33
Introduce ixgbevf_can_reuse_page() similar to the change in ixgbe from commit af43da0dba0b ("ixgbe: Add function for checking to see if we can reuse page") Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-12ixgbevf: Fix kernel-doc format warningsTony Nguyen2-5/+18
Recent checks added for formatting kernel-doc comments are causing warnings if W= is run with a non-zero value. This patch fixes function comments to resolve warnings when W=1 is used. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-09ixgbevf: remove redundant setting of xcast_modeEmil Tantilov1-4/+0
Removed leftover assignment of xcast_mode. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-21ixgbevf: Use smp_rmb rather than read_barrier_dependsBrian King1-1/+1
The original issue being fixed in this patch was seen with the ixgbe driver, but the same issue exists with ixgbevf as well, as the code is very similar. read_barrier_depends is not sufficient to ensure loads following it are not speculatively loaded out of order by the CPU, which can result in stale data being loaded, causing potential system crashes. Cc: stable <stable@vger.kernel.org> Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-4/+4
Pull networking updates from David Miller: "Highlights: 1) Maintain the TCP retransmit queue using an rbtree, with 1GB windows at 100Gb this really has become necessary. From Eric Dumazet. 2) Multi-program support for cgroup+bpf, from Alexei Starovoitov. 3) Perform broadcast flooding in hardware in mv88e6xxx, from Andrew Lunn. 4) Add meter action support to openvswitch, from Andy Zhou. 5) Add a data meta pointer for BPF accessible packets, from Daniel Borkmann. 6) Namespace-ify almost all TCP sysctl knobs, from Eric Dumazet. 7) Turn on Broadcom Tags in b53 driver, from Florian Fainelli. 8) More work to move the RTNL mutex down, from Florian Westphal. 9) Add 'bpftool' utility, to help with bpf program introspection. From Jakub Kicinski. 10) Add new 'cpumap' type for XDP_REDIRECT action, from Jesper Dangaard Brouer. 11) Support 'blocks' of transformations in the packet scheduler which can span multiple network devices, from Jiri Pirko. 12) TC flower offload support in cxgb4, from Kumar Sanghvi. 13) Priority based stream scheduler for SCTP, from Marcelo Ricardo Leitner. 14) Thunderbolt networking driver, from Amir Levy and Mika Westerberg. 15) Add RED qdisc offloadability, and use it in mlxsw driver. From Nogah Frankel. 16) eBPF based device controller for cgroup v2, from Roman Gushchin. 17) Add some fundamental tracepoints for TCP, from Song Liu. 18) Remove garbage collection from ipv6 route layer, this is a significant accomplishment. From Wei Wang. 19) Add multicast route offload support to mlxsw, from Yotam Gigi" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2177 commits) tcp: highest_sack fix geneve: fix fill_info when link down bpf: fix lockdep splat net: cdc_ncm: GetNtbFormat endian fix openvswitch: meter: fix NULL pointer dereference in ovs_meter_cmd_reply_start netem: remove unnecessary 64 bit modulus netem: use 64 bit divide by rate tcp: Namespace-ify sysctl_tcp_default_congestion_control net: Protect iterations over net::fib_notifier_ops in fib_seq_sum() ipv6: set all.accept_dad to 0 by default uapi: fix linux/tls.h userspace compilation error usbnet: ipheth: prevent TX queue timeouts when device not ready vhost_net: conditionally enable tx polling uapi: fix linux/rxrpc.h userspace compilation errors net: stmmac: fix LPI transitioning for dwmac4 atm: horizon: Fix irq release error net-sysfs: trigger netlink notification on ifalias change via sysfs openvswitch: Using kfree_rcu() to simplify the code openvswitch: Make local function ovs_nsh_key_attr_size() static openvswitch: Fix return value check in ovs_meter_cmd_features() ...
2017-10-25locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE()Mark Rutland2-2/+2
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-18ethernet/intel: Convert timers to use timer_setup()Kees Cook1-4/+4
In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. Switches test of .data field to .function, since .data will be going away. Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: intel-wired-lan@lists.osuosl.org Cc: netdev@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-01ixgbe: Initialize 64-bit stats seqcountsFlorian Fainelli1-0/+4
On 32-bit hosts and with CONFIG_DEBUG_LOCK_ALLOC we should be seeing a lockdep splat indicating this seqcount is not correctly initialized, fix that. Fixes: 4197aa7bb818 ("ixgbevf: provide 64 bit statistics") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-13ixgbevf: Bump version numberTony Nguyen1-1/+1
Update ixgbevf version number. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbevf: Resolve warnings for -Wimplicit-fallthroughTony Nguyen1-0/+2
Additions to gcc 7 now warn whenever a switch statement falls through implicitly. This patch adds explicit fall through comments to address the following warnings: drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_reta_locked’: drivers/net/ethernet/intel/ixgbevf/vf.c:336:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->mac.type < ixgbe_mac_X550_vf) ^ drivers/net/ethernet/intel/ixgbevf/vf.c:338:2: note: here default: ^~~~~~~ drivers/net/ethernet/intel/ixgbevf/vf.c: In function ‘ixgbevf_get_rss_key_locked’: drivers/net/ethernet/intel/ixgbevf/vf.c:402:6: warning: this statement may fall through [-Wimplicit-fallthrough=] if (hw->mac.type < ixgbe_mac_X550_vf) ^ drivers/net/ethernet/intel/ixgbevf/vf.c:404:2: note: here default: ^~~~~~~ Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbevf: Resolve truncation warning for q_vector->nameTony Nguyen1-7/+7
The following warning is now shown as a result of new checks added for gcc 7: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c: In function ‘ixgbevf_open’: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:13: warning: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size between 3 and 18 [-Wformat-truncation=] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~ drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1363:6: note: directive argument in the range [0, 2147483647] "%s-%s-%d", netdev->name, "TxRx", ri++); ^~~~~~~~~~ drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c:1362:4: note: ‘snprintf’ output between 8 and 32 bytes into a destination of size 24 snprintf(q_vector->name, sizeof(q_vector->name) - 1, ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ "%s-%s-%d", netdev->name, "TxRx", ri++); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Resolve this warning by making a couple of changes. - Don't reserve space for the null terminator. Since snprintf adds the null terminator automatically, there is no need for us to reserve a byte for it. - Change a couple variables that can never be negative from int to unsigned int. While we're making changes to the format string, move the constant strings into the format string instead of providing them as specifiers. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-05-31ixgbe/ixgbevf: Enables TSO for MPLS encapsulated packetsScott Peterson1-2/+10
This patch advertises TSO & GSO features in netdev->mpls_features. In ixgbe(vf)_tso() where we set up segmentation offload, the IP header will be the inner network header when eth_p_mpls() indicates the Ethernet protocol is MPLS (UC or MC). Suggested-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-29ixgbevf: Check for RSS key before setting valueTony Nguyen3-4/+34
The RSS key is being repopulated every time the interface is brought up regardless of whether there is an existing value. If the user sets the RSS key and the interface is brought up (e.g. reset), the user specified RSS key will be overwritten. This patch changes the rss_key to a pointer so we can check to see if the key has been populated and preserve it accordingly. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.