aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-10-03ixgbe: move common Tx functions to ixgbe_txrx_common.hBjörn Töpel2-6/+8
This patch prepares for the upcoming zero-copy Tx functionality by moving common functions used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: add AF_XDP zero-copy Rx supportBjörn Töpel6-21/+745
This patch adds zero-copy Rx support for AF_XDP sockets. Instead of allocating buffers of type MEM_TYPE_PAGE_SHARED, the Rx frames are allocated as MEM_TYPE_ZERO_COPY when AF_XDP is enabled for a certain queue. All AF_XDP specific functions are added to a new file, ixgbe_xsk.c. Note that when AF_XDP zero-copy is enabled, the XDP action XDP_PASS will allocate a new buffer and copy the zero-copy frame prior passing it to the kernel stack. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: move common Rx functions to ixgbe_txrx_common.hBjörn Töpel2-18/+37
This patch prepares for the upcoming zero-copy Rx functionality, by moving/changing linkage of common functions, used both by the regular path and zero-copy path. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: added Rx/Tx ring disable/enable functionsBjörn Töpel2-0/+159
Add functions for Rx/Tx ring enable/disable. Instead of resetting the whole device, only the affected ring is disabled or enabled. This plumbing is used in later commits, when zero-copy AF_XDP support is introduced. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Tested-by: William Tu <u9012063@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: Fix crash with VFs and flow director on interface flapRadoslaw Tyl1-2/+8
This patch fix crash when we have restore flow director filters after reset adapter. In ixgbe_fdir_filter_restore() filter->action is outside of the rx_ring array, as it has a VF identifier in the upper 32 bits. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03i40e: Remove unnecessary print statementNathan Chancellor1-2/+0
Clang warns that the address of a pointer will always evaluated as true in a boolean context. drivers/net/ethernet/intel/i40e/i40e_debugfs.c:136:9: warning: address of array 'vsi->active_vlans' will always evaluate to 'true' [-Wpointer-bool-conversion] vsi->active_vlans ? "<valid>" : "<null>"); ~~~~~^~~~~~~~~~~~ ~ ./include/linux/device.h:1431:33: note: expanded from macro 'dev_info' _dev_info(dev, dev_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~~ 1 warning generated. Given that the statement shows that active_vlans is always valid, just remove the statement since it's not giving any useful information. Link: https://github.com/ClangBuiltLinux/linux/issues/82 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03i40e: Use proper enum in i40e_ndo_set_vf_link_stateNathan Chancellor1-1/+1
Clang warns when one enumerated type is converted implicitly to another. drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4214:42: warning: implicit conversion from enumeration type 'enum i40e_aq_link_speed' to different enumeration type 'enum virtchnl_link_speed' [-Wenum-conversion] pfe.event_data.link_event.link_speed = I40E_LINK_SPEED_40GB; ~ ^~~~~~~~~~~~~~~~~~~~ 1 warning generated. Use the proper enum from virtchnl_link_speed, which has the same value as I40E_LINK_SPEED_40GB, VIRTCHNL_LINK_SPEED_40GB. This appears to be missed by commit ff3f4cc267f6 ("virtchnl: finish conversion to virtchnl interface"). Link: https://github.com/ClangBuiltLinux/linux/issues/81 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbevf: off by one in ixgbevf_ipsec_tx()Dan Carpenter1-1/+1
The ipsec->tx_tbl[] array has IXGBE_IPSEC_MAX_SA_COUNT elements so the > should be a >=. Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: remove redundant function ixgbe_fw_recovery_mode()YueHaibing1-11/+0
There are no in-tree callers. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbe: Fix ixgbe TX hangs with XDP_TX beyond queue limitRadoslaw Tyl1-4/+10
We have Tx hang when number Tx and XDP queues are more than 64. In XDP always is MTQC == 0x0 (64TxQs). We need more space for Tx queues. Signed-off-by: Radoslaw Tyl <radoslawx.tyl@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ixgbevf: fix msglen for ipsec mbx messagesShannon Nelson1-7/+4
Don't be fancy with message lengths, just set lengths to number of dwords, not bytes. Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Update version stringAnirudh Venkataramanan1-1/+1
Update version string to 0.7.2-k Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Use the right function to enable/disable VSIDave Ertman1-9/+14
The ice_ena/dis_vsi should have a single differentiating factor to determine if the netdev_ops call is used or a direct call to ice_vsi_open/close. This is if the netif is running or not. If netif is running, use ndo_open/ndo_close. Else, use ice_vsi_open/ice_vsi_close. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add more flexibility on how we assign an ITR indexBrett Creeley3-47/+59
This issue came about when looking at the VF function ice_vc_cfg_irq_map_msg. Currently we are assigning the itr_setting value to the itr_idx received from the AVF driver, which is not correct and is not used for the VF flow anyway. Currently the only way we set the ITR index for both the PF and VF driver is by hard coding ICE_TX_ITR or ICE_RX_ITR for the ITR index on each q_vector. To fix this, add the member itr_idx in struct ice_ring_container. This can then be used to dynamically program the correct ITR index. This change also affected the PF driver so make the necessary changes there as well. Also, removed the itr_setting member in struct ice_ring because it is not being used meaningfully and is going to be removed in a future patch that includes dynamic ITR. On another note, this will be useful moving forward if we decide to split Rx/Tx rings on different q_vectors instead of sharing them as queue pairs. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Fix potential null pointer issuesDave Ertman1-6/+7
Add checks in the filter handling flow to avoid dereferencing NULL pointers. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add code to go from ICE_FWD_TO_VSI_LIST to ICE_FWD_TO_VSIBrett Creeley1-9/+29
When a switch rule is initially created we set the filter action to ICE_FWD_TO_VSI. The filter action changes to ICE_FWD_TO_VSI_LIST whenever more than one VSI is subscribed to the same switch rule. When the switch rule goes from 2 VSIs in the list to 1 VSI we remove and delete the VSI list rule, but we currently don't update the switch rule in hardware. This is causing switch rules to be lost, so fix that by making a call to ice_update_pkt_fwd_rule() with the necessary changes. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Fix forward to queue group logicAnirudh Venkataramanan1-4/+10
When adding a rule, queue region size needs to be provided as log base 2 of the number of queues in region. Fix that. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Extend malicious operations detection logicAnirudh Venkataramanan3-2/+60
This patch extends the existing malicious driver operation detection logic to cover malicious operations by the VF driver as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Notify VF of link status changeAnirudh Venkataramanan3-0/+17
When PF gets a link status change event, notify the VFs of the same. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Implement virtchnl commands for AVF supportAnirudh Venkataramanan6-0/+1221
virtchnl is a protocol/interface specification that allows the Intel "Adaptive Virtual Function (AVF)" driver (iavf.ko) to work with more than one physical function driver. The AVF driver sends "virtchnl commands" (control plane only) to the PF driver over mailbox queues and the PF driver executes these commands and returns a result to the VF, again over mailbox. This patch adds AVF support for the ice PF driver by implementing the following virtchnl commands: VIRTCHNL_OP_VERSION VIRTCHNL_OP_GET_VF_RESOURCES VIRTCHNL_OP_RESET_VF VIRTCHNL_OP_ADD_ETH_ADDR VIRTCHNL_OP_DEL_ETH_ADDR VIRTCHNL_OP_CONFIG_VSI_QUEUES VIRTCHNL_OP_ENABLE_QUEUES VIRTCHNL_OP_DISABLE_QUEUES VIRTCHNL_OP_ADD_ETH_ADDR VIRTCHNL_OP_DEL_ETH_ADDR VIRTCHNL_OP_CONFIG_VSI_QUEUES VIRTCHNL_OP_ENABLE_QUEUES VIRTCHNL_OP_DISABLE_QUEUES VIRTCHNL_OP_REQUEST_QUEUES VIRTCHNL_OP_CONFIG_IRQ_MAP VIRTCHNL_OP_CONFIG_RSS_KEY VIRTCHNL_OP_CONFIG_RSS_LUT VIRTCHNL_OP_GET_STATS VIRTCHNL_OP_ADD_VLAN VIRTCHNL_OP_DEL_VLAN VIRTCHNL_OP_ENABLE_VLAN_STRIPPING VIRTCHNL_OP_DISABLE_VLAN_STRIPPING Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add handlers for VF netdevice operationsAnirudh Venkataramanan6-1/+629
This patch implements handlers for the following NDO operations: .ndo_set_vf_spoofchk .ndo_set_vf_mac .ndo_get_vf_config .ndo_set_vf_trust .ndo_set_vf_vlan .ndo_set_vf_link_state Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add support for VF reset eventsAnirudh Venkataramanan10-1/+272
Post VF initialization, there are a couple of different ways in which a VF reset can be triggered. One is when the underlying PF itself goes through a reset and other is via a VFLR interrupt. ice_reset_vf introduced in this patch handles both these cases. Also introduced in this patch is a helper function ice_aq_send_msg_to_vf to send messages to VF over the mailbox queue. The PF uses this to send reset notifications to VFs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Update VSI and queue management code to handle VF VSIAnirudh Venkataramanan6-34/+184
Until now, all the VSI and queue management code supported only the PF VSI type (ICE_VSI_PF). Update these flows to handle the VF VSI type (ICE_VSI_VF) type as well. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add handler to configure SR-IOVAnirudh Venkataramanan11-9/+1061
This patch implements parts of ice_sriov_configure and VF reset flow. To create virtual functions (VFs), the user sets a value in num_vfs through sysfs. This results in the kernel calling the handler for .sriov_configure which is ice_sriov_configure. VF setup first starts with a VF reset, followed by allocation of the VF VSI using ice_vf_vsi_setup. Once the VF setup is complete a state bit ICE_VF_STATE_INIT is set in the vf->states bitmap to indicate that the VF is ready to go. Also for VF reset to go into effect, it's necessary to issue a disable queue command (ice_aqc_opc_dis_txqs). So this patch updates multiple functions in the disable queue flow to take additional parameters that distinguish if queues are being disabled due to VF reset. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03ice: Add support to detect SR-IOV capability and mailbox queuesAnirudh Venkataramanan8-1/+151
Mailbox queue is a type of control queue that's used for communication between PF and VF. This patch adds code to initialize, configure and use mailbox queues. This patch also adds support to detect and parse SR-IOV capabilities returned by the hardware. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02PCI/AER: Remove pci_cleanup_aer_uncorrect_error_status() callsOza Pawandeep5-32/+0
After bfcb79fca19d ("PCI/ERR: Run error recovery callbacks for all affected devices"), AER errors are always cleared by the PCI core and drivers don't need to do it themselves. Remove calls to pci_cleanup_aer_uncorrect_error_status() from device driver error recovery functions. Signed-off-by: Oza Pawandeep <poza@codeaurora.org> [bhelgaas: changelog, remove PCI core changes, remove unused variables] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-10-02ice: Fix error on driver removeDave Ertman1-0/+6
If the driver is unloaded when traffic is in progress, errors are generated. Fix this by releasing qvectors and NAPI handler on remove. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Add support for dynamic interrupt moderationBrett Creeley7-24/+102
Currently there is no support for dynamic interrupt moderation. This patch adds some initial code to support this. The following changes were made: 1. Currently we are using multiple members to store the interrupt granularity (itr_gran_25/50/100/200). This is not necessary because we can query the device to determine what the interrupt granularity should be set to, done by a new function ice_get_itr_intrl_gran. 2. Added intrl to ice_q_vector structure to support interrupt rate limiting. 3. Added the function ice_intrl_usecs_to_reg for converting to a value in usecs that the device understands. 4. Added call to write to the GLINT_RATE register. Disable intrl by default for now. 5. Changed rx/tx_itr_setting to itr_setting because having both seems redundant because a ring is either Tx or Rx. 6. Initialize itr_setting for both Tx/Rx rings in ice_vsi_alloc_rings() Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Align ice_reset_req enum values to hardware reset valuesBrett Creeley2-5/+14
Currently the ice_reset_req enum values have to be translated into a different set of values that the hardware understands for the same reset types. Avoid this translation by aligning ice_reset_req enum values to the ones that the hardware understands. Also add and else if block to check for ICE_RESET_EMPR and put a dev_dbg message in the else case. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Implement ethtool hook for RSS switchMd Fahad Iqbal Polash3-0/+40
This patch implements ethtool hook for enabling/disabling RSS. While disabling RSS, the LUT should be cleared. And the LUT should be reconfigured while enabling RSS. Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Split irq_tracker into sw_irq_tracker and hw_irq_trackerPreethi Banala3-64/+148
For the PF driver, when mapping interrupts to queues, we need to request IRQs from the kernel and we also have to allocate interrupts from the device. Similarly, when the VF driver (iavf.ko) initializes, it requests the kernel IRQs that it needs but it can't directly allocate interrupts in the device. Instead, it sends a mailbox message to the ice driver, which then allocates interrupts in the device on the VF driver's behalf. Currently both these cases end up having to reserve entries in pf->irq_tracker but irq_tracker itself is sized based on how many vectors the PF driver needs. Under the right circumstances, the VF driver can fail to get entries in irq_tracker, which will result in the VF driver failing probe. To fix this, sw_irq_tracker and hw_irq_tracker are introduced. The sw_irq_tracker tracks only the PF's IRQ request and doesn't play any role in VF init. hw_irq_tracker represents the device's interrupt space. When interrupts have to be allocated in the device for either PF or VF, hw_irq_tracker will be looked up to see if the device has run out of interrupts. Signed-off-by: Preethi Banala <preethi.banala@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Check for actual link state of port after resetDave Ertman3-2/+6
We are currently replaying the link state of a port after a reset, but it is possible that the link state of a port can change during the reset process. So check for the current link state of a port during the rebuild process of a reset. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Implement VSI replay frameworkAnirudh Venkataramanan6-51/+178
Currently, switch filters get replayed after reset. In addition to filters, other VSI attributes (like RSS configuration, Tx scheduler configuration, etc.) also need to be replayed after reset. Thus, instead of replaying based on functional blocks (i.e. replay all filters for all VSIs, followed by RSS configuration replay for all VSIs, and so on), it makes more sense to have the replay centered around a VSI. In other words, replay all configurations for a VSI before moving on to rebuilding the next VSI. To that effect, this patch introduces a VSI replay framework in a new function ice_vsi_replay_all. Currently it only replays switch filters, but it will be expanded in the future to replay additional VSI attributes. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Expand use of VSI handles part 2/2Anirudh Venkataramanan9-163/+132
This patch is a continuation of the previous patch where VSI handles are used instead of VSI numbers. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-02ice: Expand use of VSI handles part 1/2Anirudh Venkataramanan4-200/+328
A VSI handle is just a number the driver maintains to uniquely identify a VSI. A VSI handle is backed by a VSI number in the hardware. When interacting when the hardware, VSI handles are converted into VSI numbers. In commit 0f9d5027a749 ("ice: Refactor VSI allocation, deletion and rebuild flow"), VSI handles were introduced but it was used only when creating and deleting VSIs. This patch is part one of two patches that expands the use of VSI handles across the rest of the driver. Also in this patch, certain parts of the code had to be refactored to correctly use VSI handles. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Change pf state behavior to protect reset pathDave Ertman4-30/+31
Currently, there is no bit, or set of bits, that protect the entirety of the reset path. If the reset is originated by the driver, then the relevant one of the following bits will be set when the reset is scheduled: __ICE_PFR_REQ __ICE_CORER_REQ __ICE_GLOBR_REQ This bit will not be cleared until after the rebuild has completed. If the reset is originated by the FW, then the first the driver knows of it will be the reception of the OICR interrupt. The __ICE_RESET_OICR_RECV bit will be set in the interrupt handler. This will also be the indicator in a SW originated reset that we have completed the pre-OICR tasks and have informed the FW that a reset was requested. To utilize these bits, change the function: ice_is_reset_recovery_pending() to be: ice_is_reset_in_progress() The new function will check all of the above bits in the pf->state and will return a true if one or more of these bits are set. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 7/7Anirudh Venkataramanan3-282/+249
This patch completes the code move out of ice_main.c The following top level functions and related dependency functions) were moved to ice_lib.c: ice_vsi_setup ice_vsi_cfg_tc The following functions were made static again: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs void ice_vsi_map_rings_to_vectors ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 6/7Anirudh Venkataramanan3-450/+521
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_setup_vector_base ice_vsi_alloc_q_vectors ice_vsi_get_qs The following functions were made static again: ice_vsi_free_arrays ice_vsi_clear_rings Also, in this patch, the netdev and NAPI registration logic was de-coupled from the VSI creation logic (ice_vsi_setup) as for SR-IOV, while we want to create VF VSIs using ice_vsi_setup, we don't want to create netdevs. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 5/7Anirudh Venkataramanan3-132/+141
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_clear ice_vsi_close ice_vsi_free_arrays ice_vsi_map_rings_to_vectors Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 4/7Anirudh Venkataramanan3-417/+429
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_alloc_rings ice_vsi_set_rss_params ice_vsi_set_num_qs ice_get_free_slot ice_vsi_init ice_vsi_clear_rings ice_vsi_alloc_arrays Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 3/7Anirudh Venkataramanan3-386/+410
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_delete ice_free_res ice_get_res ice_is_reset_recovery_pending ice_vsi_put_qs ice_vsi_dis_irq ice_vsi_free_irq ice_vsi_free_rx_rings ice_vsi_free_tx_rings ice_msix_clean_rings Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 2/7Anirudh Venkataramanan3-519/+526
This patch continues the code move out of ice_main.c The following top level functions (and related dependency functions) were moved to ice_lib.c: ice_vsi_start_rx_rings ice_vsi_stop_rx_rings ice_vsi_stop_tx_rings ice_vsi_cfg_rxqs ice_vsi_cfg_txqs ice_vsi_cfg_msix Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-01ice: Move common functions out of ice_main.c part 1/7Anirudh Venkataramanan6-315/+348
The functions that are used for PF VSI/netdev setup will also be used for SR-IOV support. To allow reuse of these functions, move these functions out of ice_main.c to ice_common.c/ice_lib.c This move is done across multiple patches. Each patch moves a few functions and may have minor adjustments. For example, a function that was previously static in ice_main.c will be made non-static temporarily in its new location to allow the driver to build cleanly. These adjustments will be removed in subsequent patches where more code is moved out of ice_main.c In this particular patch, the following functions were moved out of ice_main.c: int ice_add_mac_to_list ice_free_fltr_list ice_stat_update40 ice_stat_update32 ice_update_eth_stats ice_vsi_add_vlan ice_vsi_kill_vlan ice_vsi_manage_vlan_insertion ice_vsi_manage_vlan_stripping Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: fix changing of ring descriptor size (ethtool -G)Bruce Allan2-5/+16
rx_mini_pending was set to an incorrect value. This was causing EINVAL to always be returned to 'ethtool -G'. The driver does not support mini or jumbo rings so the respective settings should be zero. Also, change the valid range of the number of descriptors in the rings to make the code simpler and easier for users to understand (this removes the valid settings of 8 and 16). Add a system log message indicating when the number is rounded-up from what the user specifies with the 'ethtool -G' command (i.e. when it is not a multiple of 32), and update the log message when a user-provided value is out of range to also indicate the stride. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: Update to capabilities admin queue commandAnirudh Venkataramanan1-16/+34
This patch makes a couple of changes in the way the driver uses the "get capabilities" command. 1. Get device capabilities in addition to function capabilities 2. Align to latest spec by using cap_count to determine size of the buffer in case of length error. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: Query the Tx scheduler node before adding itAnirudh Venkataramanan2-1/+71
Query the Tx scheduler tree node information from FW before adding it to the driver's software database. This will keep the node information current in driver. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: Update comment for ice_fltr_mgmt_list_entryBrett Creeley1-1/+2
Previously the comment stated that VSI lists should be used when a second VSI becomes a subscriber to the "VLAN address". VSI lists are always used for VLAN membership, so replace "VLAN address" with "MAC address". Also note that VLAN(s) always use VSI list rules. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: update fw version check logicJacob Keller1-11/+19
We have MAX_FW_API_VER_BRANCH, MAX_FW_API_VER_MAJOR, and MAX_FW_API_VER_MINOR that we use in ice_controlq.h to test when a firmware version is newer than expected. This is currently tested by comparing each field separately. Thus, we compare the branch field against the MAX_FW_API_VER_BRANCH, and so forth. This means that currently, if we suppose that the max firmware version is defined as 0.2.1, i.e. Then firmware 0.1.3 will fail to load. This is because the minor version 3 is greater than the max minor version 1. This is not intuitive, because of the notion that increasing the major firmware version to 2 should mean any firmware version with a major version is less than 2 should be considered older than 2... In order to allow both 0.2.1 and 0.1.3 to load, you would have to define the "max" firmware version as 0.2.3.. It is possible that such a firmware version doesn't even exist yet! Fix this by replacing the current logic with an updated check that behaves as follows: First, we check the major version. If it is greater than the expected version, then we prevent driver load. Additionally, a warning message is logged to indicate to the system administrator that they need to update their driver. This is now the only case where the driver will refuse to load. Second, if the major version is less than the expected version, we log an information message indicating the NVM should be updated. Third, if the major version is exact, we'll then check the minor version. If the minor version is more than two versions less than expected, we log an information message indicating the NVM should be updated. If it is more than two versions greater than the expected version, we log an information message that the driver should be updated. To support this, the ice_aq_ver_check function needs its signature updated to pass the HW structure. Since we now pass this structure, there is no need to pass the firmware API versions separately. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: update branding strings and supported device idsBruce Allan2-9/+3
Update branding strings and remove device ids 0x1594 and 0x1595. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-09-28ice: replace unnecessary memcpy with direct assignmentBruce Allan1-1/+1
Direct assignment is preferred over a memcpy() Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.