| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
1) New generic devlink param "enable_roce", for downstream devlink
reload support
2) Do vport ACL configuration on per vport basis when
enabling/disabling a vport. This enables to have vports enabled/disabled
outside of eswitch config for future
3) Split the code for legacy vs offloads mode and make it clear
4) Tide up vport locking and workqueue usage
5) Fix metadata enablement for ECPF
6) Make explicit use of VF property to publish IB_DEVICE_VIRTUAL_FUNCTION
7) E-Switch and flow steering core low level support and refactoring for
netfilter flowtables offload
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Tc chains are implemented by creating a chained prio steering type, and
inside it there is a namespace for each chain (FDB_TC_MAX_CHAINS). Each
of those has a list of priorities.
Currently, all namespaces in a prio start at the parent prio level.
But since we can jump from chain (namespace) to another chain in the
same prio, we need the levels for higher chains to be higher as well.
So we created unused prios to account for levels in previous namespaces.
Fix that by accumulating the namespaces levels if we are inside a chained
type prio, and removing the unused prios.
Fixes: 328edb499f99 ('net/mlx5: Split FDB fast path prio to multiple namespaces')
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Rename it to prepare for next patch that will add a
different type of offload to the FDB.
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The value is already the calculation so remove the log prefix.
Fixes: e52c28024008 ("net/mlx5: E-Switch, Add chains and priorities")
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
There is a spelling mistake in a esw_warn warning message. Fix it.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Saeed Mahameed says:
====================
mlx5-updates-2019-11-01
Misc updates for mlx5 netdev and core driver
1) Steering Core: Replace CRC32 internal implementation with standard
kernel lib.
2) Steering Core: Support IPv4 and IPv6 mixed matcher.
3) Steering Core: Lockless FTE read lookups
4) TC: Bit sized fields rewrite support.
5) FPGA: Standalone FPGA support.
6) SRIOV: Reset VF parameters configurations on SRIOV disable.
7) netdev: Dump WQs wqe descriptors on CQE with error events.
8) MISC Cleanups.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When setting number of VFs to 0 (disable SRIOV), clear VF's
configuration.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently on ECPF, metadata is enabled on the ECPF vport = 0xfffe
(manager vport).
Metadata when supported, must be enabled on own vport which is
used to pass metadata to vport of NIC Rx Flow Table.
Due to this error, traffic tagged by ingress ACL is not processed
correctly at NIC rx flow table level which is supposed to work
on metadata tag.
Hence, instead of working on eswitch manager vport, always working on
eswitch own vport regardless of PF or ECPF.
Given that mlx5_eswitch_query/modify_esw_vport_context() is used to
access other vport in legacy mode and own vport settings in switchdev mode,
extend low level API to explicitly specify other_vport.
Fixes: c1286050cf47 ("net/mlx5: E-Switch, Pass metadata from FDB to eswitch manager")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Drop, untagged, spoof check and untagged spoof check flow groups are
limited to legacy mode only.
Therefore, following refactoring is done to
(a) improve code readability
(b) have better code split between legacy and offloads mode
1. Move legacy flow groups under legacy structure
2. Add validity check for group deletion
3. Restrict scope of esw_vport_disable_ingress_acl to legacy mode
4. Rename esw_vport_enable_ingress_acl() to
esw_vport_create_ingress_acl_table() and limit its scope to
table creation
5. Introduce legacy flow groups creation helper
esw_legacy_create_ingress_acl_groups() and keep its scope to legacy mode
6. Reduce offloads ingress groups from 4 to just 1 metadata group
per vport
7. Removed redundant IS_ERR_OR_NULL as entries are marked NULL on free.
8. Shortern error message to remove redundant 'E-switch'
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Now that there is clear separation for acl setup/cleanup between legacy
and offloads mode, limit metdata disablement to offloads mode.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently legacy mode enables ACL while enabling vport, while offloads
mode enable ACL when moving to offloads mode.
Bring consistency to both modes by enabling/disabling ACL when
enabling/disabling a vport.
It also eliminates creating ingress ACL table on unused ECPF vport in
offloads mode.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Introduce and use per vport ACL tables creation and destroy APIs, so that
subsequently patch can use them during enabling/disabling a vport.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In subsequent patch, esw_enable_vport() could fail and return error.
Prepare code to handle such error.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Metadata fields are offload mode specific.
To improve code readability, move metadata under offloads structure.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Between legacy mode and switchdev mode, only two fields are changed,
vlan_tag and flow action.
Hence to avoid duplicte code between two modes, introduce and and use
helper function to configure allowed VLAN rule.
While at it, get rid of duplicate debug message.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Changing the function name esw_ingress_acl_common_config() to
esw_ingress_acl_config() to be consistent with egress config
function naming in offloads mode.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Refactor vport egress config in offloads mode
Refactoring vport egress configuration in offloads mode that
includes egress prio tag configuration.
This makes code symmetric to ingress configuration.
Signed-off-by: Vu Pham <vuhuong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Driver have function, which enable match criteria for misc parameters
in dependence of eswitch capabilities.
Fixes: 4f5d1beadc10 ("Merge branch 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux")
Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The error return from a call to mlx5_flow_namespace_set_peer is not
being assigned to variable err and hence the error check following
the call is currently not working. Fix this by assigning ret as
intended.
Addresses-Coverity: ("Logically dead code")
Fixes: 8463daf17e80 ("net/mlx5: Add support to use SMFS in switchdev mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In case that flow steering mode of the driver is SMFS (Software Managed
Flow Steering), then use the DR (SW steering) API to create the steering
objects.
In addition, add a call to the set peer namespace when switchdev gets
devcom pair event. It is required to support VF LAG in SMFS.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add flow steering actions: modify header and packet reformat
to the fs_cmd shim layer. This allows each namespace to define
possibly different functionality for alloc/dealloc action commands.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Merge conflict of mlx5 resolved using instructions in merge
commit 9566e650bf7fdf58384bb06df634f7531ca3a97e.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently mlx5_eswitch_rep stores same hw ID for all representors.
However it is never used from this structure.
It is always used from mlx5_vport.
Hence, remove unused field.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Vu Pham <vuhuong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
We have an issue that OVS application creates an offloaded drop rule
that drops VXLAN traffic with both inner and outer header match
criteria. mlx5_core driver detects correctly the inner and outer
header match criteria but does not enable the inner header match criteria
due to an incorrect assumption in mlx5_eswitch_add_offloaded_rule that
only decap rule needs inner header criteria.
Solution:
Remove mlx5_esw_flow_attr's match_level and tunnel_match_level and add
two new members: inner_match_level and outer_match_level.
inner/outer_match_level is set to NONE if the inner/outer match criteria
is not specified in the tc rule creation request. The decap assumption is
removed and the code just needs to check for inner/outer_match_level to
enable the corresponding bit in firmware's match_criteria_enable value.
Fixes: 6363651d6dd7 ("net/mlx5e: Properly set steering match levels for offloaded TC decap rules")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Misc updates from mlx5-next branch.
1) Eli improves the handling of the support for QoS element type
2) Gavi refactors and prepares mlx5 flow counters for bulk allocation
support
3) Parav, refactors and improves E-Switch load/unload flows
4) Saeed, two misc cleanups
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Currently for PF and ECPF vports, representors are created before
their eswitch hardware ports are initialized in below flow.
mlx5_eswitch_enable()
esw_offloads_init()
esw_offloads_load_all_reps()
[..]
esw_enable_vport()
However for VFs, vports are initialized before creating their
respective netdev represnetors in event handling context.
Similarly while disabling eswitch, first hardware vports are disabled,
followed by destroying their representors.
Here while underlying vports gets destroyed but its respective user
facing netdevice can still exist on which user can continue to perform
more offload operations.
Instead, its more accurate to do
enable_eswitch switchdev mode:
1. perform FDB tables initialization
2. initialize hw vport
3. create and publish representor for this vport
disable_eswitch switchdev mode:
1. destroy user facing representor for the vport
2. disable hw vport
3. perform FDB tables cleanup
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Except bit toggling code, rest of the code is same to enable/disable
metadata passing functionality.
Hence, combine them to single function and control using enable flag.
Also instead of checking metadata supported at multiple places,
fold into the helper function.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
esw->state_lock is already used to protect vlan vport configuration change.
However, all preparation and correctness checks, and code that sets vport
data are not protected by this lock and assume external synchronization by
rtnl lock. In order to remove dependency on rtnl lock, extend
esw->state_lock protection to whole eswitch vlan add/del functions.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Eswitch implements its own locking by means of state_lock mutex and
multiple fine-grained lock in containing data structures, and is supposed
to not rely on rtnl lock. However, eswitch offloads num_flows type is a
regular long long integer and cannot be modified concurrently. This is an
implicit assumptions that mlx5 tc is serialized (by rtnl lock or any other
means). In order to remove implicit dependency on rtnl lock, change
num_flows type to atomic64 to allow concurrent modifications.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
kvzalloc already zeroes the memory during the allocation.
pci_alloc_consistent calls dma_alloc_coherent directly.
In commit 518a2f1925c3
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So the memset after these function is not needed.
Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-07-11
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.15
('net/mlx5e: IPoIB, Add error path in mlx5_rdma_setup_rn')
For -stable v5.1
('net/mlx5e: Fix port tunnel GRE entropy control')
('net/mlx5e: Rx, Fix checksum calculation for new hardware')
('net/mlx5e: Fix return value from timeout recover function')
('net/mlx5e: Fix error flow in tx reporter diagnose')
For -stable v5.2
('net/mlx5: E-Switch, Fix default encap mode')
Conflict note: This pull request will produce a small conflict when
merged with net-next.
In drivers/net/ethernet/mellanox/mlx5/core/eswitch_offloads.c
Take the hunk from net and replace:
esw_offloads_steering_init(esw, vf_nvports, total_nvports);
with:
esw_offloads_steering_init(esw);
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Fix the following compiler warning:
In function ‘esw_vport_add_ingress_acl_modify_metadata’:
the frame size of 1084 bytes is larger than 1024 bytes [-Wframe-larger-than=]
Since the structure is never written to, we can statically allocate
it to avoid the stack usage.
Fixes: 7445cfb1169c ("net/mlx5: E-Switch, Tag packet with vport number in VF vports and uplink ingress ACLs")
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Reviewed-by: Jianbo Liu <jianbol@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Encap mode is related to switchdev mode only. Move the init of
the encap mode to eswitch_offloads. Before this change, we reported
that eswitch supports encap, even tough the device was in non
SRIOV mode.
Fixes: 7768d1971de67 ('net/mlx5: E-Switch, Add control for encapsulation')
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Misc updates from mlx5-next branch:
1) Add the required HW definitions and structures for upcoming TLS
support.
2) Add support for MCQI and MCQS hardware registers for fw version query.
3) Added hardware bits and structures definitions for sub-functions
4) Small code cleanup and improvement for PF pci driver.
5) Bluefield (ECPF) updates and refactoring for better E-Switch
management on ECPF embedded CPU NIC:
5.1) Consolidate querying eswitch number of VFs
5.2) Register event handler at the correct E-Switch init stage
5.3) Setup PF's inline mode and vlan pop when the ECPF is the
E-Swtich manager ( the host PF is basically a VF ).
5.4) Handle Vport UC address changes in switchdev mode.
6) Cleanup the rep and netdev reference when unloading IB rep.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
i# All conflicts fixed but you are still merging.
|
|
Functions change event output data size changes when functions other
than VFs will be enabled in HCA CAP.
With current API, multiple callers needs to align, calculate accurate
size of the output data depending on number on non VF functions enabled
in the device.
Instead of duplicating such math at multiple places, refactor
mlx5_esw_query_functions() to return raw output allocated by itself.
Caller must free the allocated memory using kvfree() as described in the
function comment section.
This hides calcuation within mlx5_esw_query_functions() and provides
simpler API.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Eswitch function change handler will service multiple type of events for
VFs and non VF functions update.
Hence, introduce and use the helper function
esw_vfs_changed_event_handler() for handling change in num VFs to improve
the code readability.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports().
mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF
vports as well.
Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to
more generic vport.h header file. Such exposure is not desired.
Hence a mlx5_eswitch_get_total_vports() is introduced.
Given that mlx5_eswitch_get_total_vports() API wants to work on const
mlx5_core_dev*, change its helper functions also to accept const *dev.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When ECPF is the eswitch manager, host PF is treated like other VFs.
Driver should do the same for inline mode and vlan pop.
Add new iterators to include host PF if ECPF is the eswitch manager.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Use the defined iterators to traversal VF reps/vport. Also, rely on
num of VFs rather than the counter of enabled vports as PF will also
be enabled from ECPF side, and the counter will be different from
num of VFs.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When driver is doing eswitch mode change, it's critical to keep number
of enabled VFs unchanged. However, it can be changed on the fly once
function changed event is registered.
To remove this uncertainty, function changed event should not be
registered before all setups, and first be unregistered before all
cleanups. Wrap this functionality together with vport event handler.
Fixes: 61fc880839e6 ("net/mlx5: E-Switch, Handle representors creation in handler context")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Enabled number of VFs is key for eswich manager to do flow steering
initialization and vport configurations. However, the number of
enabled VFs may come from two sources as below.
PF: num of VFs is provided by enabled SR-IOV of itself.
ECPF: num of VFs is provided by enabled SR-IOV from its peer PF. And
SR-IOV can't be enabled from ECPF itself.
Current driver handles the two cases in different stages and passing
the number of enabled VFs among a large scope of internal functions.
It is usually hard to find out where is the real number of VFs from
due to layers of argument pass-in.
This patch consolidated that number from the entry point of doing
eswitch setup, and maintained a copy so that eswitch functions can
refer to it directly.
Eswitch driver shall always use this number when referring to enabled
number of VFs, don't use other numbers such as from SR-IOV.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF
can be at offload mode when SR-IOV is not enabled.
Rename the interface and eswitch mode names to decouple from SR-IOV,
and cleanup eswitch messages accordingly.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When ECPF is eswitch manager, it has the privilege to query and
configure the mac and node guid of host PF.
While vport number of host PF is 0, the vport command should be
issued with other_vport set in this case as the cmd is issued by
ECPF vport(0xfffe).
Add a specific function to query own vport mac. Low level functions
are used by vport manager to query/modify any vport mac and node guid.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When ECPF eswitch manager is at offloads mode, it monitors functions
changed event from host PF side and acts according to the number of
VFs enabled/disabled.
As ECPF and host PF work in two independent hosts, it's possible that
host PF OS reboots but ECPF system is still kept on and continues
monitoring events from host PF. When kernel from host PF side is
booting, PCI iov driver does sriov_init and compute_max_vf_buses by
iterating over all valid num of VFs. This triggers FLR and generates
functions changed events, even though host PF HCA is not enabled at
this time. However, ECPF is not aware of this information, and still
handles these events as usual. ECPF system will see massive number of
reps are created, but destroyed immediately once creation finished.
To eliminate this noise, a bit is added to host parameter context to
indicate host PF is disabled. ECPF will not handle the VF changed
event if this bit is set.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In the single IB device mode, the mapping between vport number and
rep relies on a counter. However for dynamic vport allocation, it is
desired to keep consistent map of eswitch vport and IB port.
Hence, simplify code to remove the free running counter and instead
use the available vport index during load/unload sequence from the
eswitch.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Suggested-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Driver is referring to the array index when doing rep initialization,
using vport is confusing as it's normally interpreted as vport number.
This patch doesn't change any functionality.
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Misc updates from mlx5-next branch:
1) E-Switch vport metadata support for source vport matching
2) Convert mkey_table to XArray
3) Shared IRQs and to use single IRQ for all async EQs
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
As the ingress ACL rules save vhca id and vport number to packet's
metadata REG_C_0, and the metadata matching for the rules in both fast
path and slow path are all added, enable this feature if supported.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
In slow path, packet that not matched by any offloaded rule is
forwarded to eswitch vport manager for further processing.
Add matching on metadata for peer miss rules in FDB, and rules which
forward packet to correct representor in esw manager NIC_RX table.
Signed-off-by: Jianbo Liu <jianbol@mellanox.com>
Reviewed-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
Saeed Mahameed
Paul Blakey
David S. Miller
Roi Dayan
Colin Ian King
Aya Levin
Parav Pandit
Vu Pham
Dmytro Linkin
Maor Gottlieb
Huy Nguyen
Vlad Buslov
Fuqian Huang
Bodong Wang
Jianbo Liu