aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-18mlxsw: core: Prevent QSFP module initialization for old hardwareVadim Pasternak1-0/+6
Old Mellanox silicons, like switchx-2, switch-ib do not support reading QSFP modules temperature through MTMP register. Attempt to access this register on systems equipped with the this kind of silicon will cause initialization flow failure. Test for hardware resource capability is added in order to distinct between old and new silicon - old silicons do not have such capability. Fixes: 6a79507cfe94 ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Fixes: 5c42eaa07bd0 ("mlxsw: core: Extend hwmon interface with QSFP module temperature attributes") Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22mlxsw: spectrum_buffers: Add extack messages for invalid configurationsIdo Schimmel1-3/+4
Add extack messages to better communicate invalid configuration to the user. Example: # devlink sb pool set pci/0000:01:00.0 pool 0 size 104857600 thtype dynamic Error: mlxsw_spectrum: Exceeded shared buffer size. devlink answers: Invalid argument Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22net: devlink: Add extack to shared buffer operationsIdo Schimmel1-3/+6
Add extack to shared buffer set operations, so that meaningful error messages could be propagated to the user. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+3
Conflict resolution of af_smc.c from Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw workqueueIdo Schimmel1-1/+1
The workqueue is used to periodically update the networking stack about activity / statistics of various objects such as neighbours and TC actions. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. Fixes: 3d5479e92087 ("mlxsw: core: Remove deprecated create_workqueue") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for mlxsw ordered workqueueIdo Schimmel1-1/+1
The ordered workqueue is used to offload various objects such as routes and neighbours in the order they are notified. It should not be called as part of memory reclaim path, so remove the WQ_MEM_RECLAIM flag. This can also result in a warning [1], if a worker tries to flush a non-WQ_MEM_RECLAIM workqueue. [1] [97703.542861] workqueue: WQ_MEM_RECLAIM mlxsw_core_ordered:mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] is flushing !WQ_MEM_RECLAIM events:rht_deferred_worker [97703.542884] WARNING: CPU: 1 PID: 32492 at kernel/workqueue.c:2605 check_flush_dependency+0xb5/0x130 ... [97703.542988] Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 [97703.543049] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fib6_event_work [mlxsw_spectrum] [97703.543061] RIP: 0010:check_flush_dependency+0xb5/0x130 ... [97703.543071] RSP: 0018:ffffb3f08137bc00 EFLAGS: 00010086 [97703.543076] RAX: 0000000000000000 RBX: ffff96e07740ae00 RCX: 0000000000000000 [97703.543080] RDX: 0000000000000094 RSI: ffffffff82dc1934 RDI: 0000000000000046 [97703.543084] RBP: ffffb3f08137bc20 R08: ffffffff82dc18a0 R09: 00000000000225c0 [97703.543087] R10: 0000000000000000 R11: 0000000000007eec R12: ffffffff816e4ee0 [97703.543091] R13: ffff96e06f6a5c00 R14: ffff96e077ba7700 R15: ffffffff812ab0c0 [97703.543097] FS: 0000000000000000(0000) GS:ffff96e077a80000(0000) knlGS:0000000000000000 [97703.543101] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [97703.543104] CR2: 00007f8cd135b280 CR3: 00000001e860e003 CR4: 00000000003606e0 [97703.543109] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [97703.543112] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [97703.543115] Call Trace: [97703.543129] __flush_work+0xbd/0x1e0 [97703.543137] ? __cancel_work_timer+0x136/0x1b0 [97703.543145] ? pwq_dec_nr_in_flight+0x49/0xa0 [97703.543154] __cancel_work_timer+0x136/0x1b0 [97703.543175] ? mlxsw_reg_trans_bulk_wait+0x145/0x400 [mlxsw_core] [97703.543184] cancel_work_sync+0x10/0x20 [97703.543191] rhashtable_free_and_destroy+0x23/0x140 [97703.543198] rhashtable_destroy+0xd/0x10 [97703.543254] mlxsw_sp_fib_destroy+0xb1/0xf0 [mlxsw_spectrum] [97703.543310] mlxsw_sp_vr_put+0xa8/0xc0 [mlxsw_spectrum] [97703.543364] mlxsw_sp_fib_node_put+0xbf/0x140 [mlxsw_spectrum] [97703.543418] ? mlxsw_sp_fib6_entry_destroy+0xe8/0x110 [mlxsw_spectrum] [97703.543475] mlxsw_sp_router_fib6_event_work+0x6cd/0x7f0 [mlxsw_spectrum] [97703.543484] process_one_work+0x1fd/0x400 [97703.543493] worker_thread+0x34/0x410 [97703.543500] kthread+0x121/0x140 [97703.543507] ? process_one_work+0x400/0x400 [97703.543512] ? kthread_park+0x90/0x90 [97703.543523] ret_from_fork+0x35/0x40 Fixes: a3832b31898f ("mlxsw: core: Create an ordered workqueue for FIB offload") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Semion Lisyansky <semionl@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-10mlxsw: core: Do not use WQ_MEM_RECLAIM for EMAD workqueueIdo Schimmel1-1/+1
The EMAD workqueue is used to handle retransmission of EMAD packets that contain configuration data for the device's firmware. Given the workers need to allocate these packets and that the code is not called as part of memory reclaim path, remove the WQ_MEM_RECLAIM flag. Fixes: d965465b60ba ("mlxsw: core: Fix possible deadlock") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-08mlxsw: core: Add support for devlink info commandShalom Toledo1-0/+41
Expose the following ASIC information via devlink info command: - Driver name - Hardware revision - Firmware PSID - Running firmware version Standard output example: $ devlink dev info pci/0000:03:00.0 pci/0000:03:00.0: driver mlxsw_spectrum versions: fixed: hw.revision A0 fw.psid MT_2750110033 running: fw.version 13.1910.622 Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04mlxsw: Pass switch ID through devlink_port_attrs_set()Jiri Pirko1-2/+4
Pass the switch ID down the to devlink through devlink_port_attrs_set() so it can be used by devlink_compat_switch_id_get(). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-04net: devlink: extend port attrs for switch IDJiri Pirko1-1/+2
Extend devlink_port_attrs_set() to pass switch ID for ports which are part of switch and store it in port attrs. For other ports, this is NULL. Note that this allows the driver to group devlink ports into one or more switches according to the actual topology. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Remove ndo_get_phys_port_name implementationJiri Pirko1-10/+0
Rely on the previously introduced fallback and let the core call devlink directly in order to get the physical port name. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28mlxsw: Implement ndo_get_devlink_portJiri Pirko1-0/+12
In order for devlink compat functions to work, implement ndo_get_devlink_port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24mlxsw: Move devlink_port_attrs_set() call before registerJiri Pirko1-6/+6
Since attrs are static during the existence of devlink port, set the before registration of the port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: core: Move resource query API to common locationVadim Pasternak1-0/+37
Move mlxsw_pci_resources_query() to a common location to allow reuse by the different drivers and over all the supported physical buses. Rename it to mlxsw_core_resources_query(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08devlink: publish params only after driver init is doneJiri Pirko1-0/+5
Currently, user can do dump or get of param values right after the devlink params are registered. However the driver may not be initialized which is an issue. The same problem happens during notification upon param registration. Allow driver to publish devlink params whenever it is ready to handle get() ops. Note that this cannot be resolved by init reordering, as the "driverinit" params have to be available before the driver is initialized (it needs the param values there). Signed-off-by: Jiri Pirko <jiri@mellanox.com> Cc: Michael Chan <michael.chan@broadcom.com> Cc: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06mlxsw: core: Trace EMAD errorsNir Dotan1-1/+5
Trace EMAD errors returned from HW. Signed-off-by: Nir Dotan <nird@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+18
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18mlxsw: core: Increase timeout during firmware flash processShalom Toledo1-1/+18
During the firmware flash process, some of the EMADs get timed out, which causes the driver to send them again with a limit of 5 retries. There are some situations in which 5 retries is not enough and the EMAD access fails. If the failed EMAD was related to the flashing process, the driver fails the flashing. The reason for these timeouts during firmware flashing is cache misses in the CPU running the firmware. In case the CPU needs to fetch instructions from the flash when a firmware is flashed, it needs to wait for the flashing to complete. Since flashing takes time, it is possible for pending EMADs to timeout. Fix by increasing EMADs' timeout while flashing firmware. Fixes: ce6ef68f433f ("mlxsw: spectrum: Implement the ethtool flash_device callback") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03mlxsw: spectrum: Load firmware version based on devlink parameterShalom Toledo1-0/+13
Load firmware version based on 'fw_load_policy' devlink parameter. The driver supports these two options: * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_DRIVER (0) Default, load firmware version preferred by the driver * DEVLINK_PARAM_FW_LOAD_POLICY_VALUE_FLASH (1) Load firmware currently stored in flash The second option, 'flash', allow the device to run with different firmware version than preferred by the driver for testing and/or debugging purposes. For example, testing a firmware bug fix. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03mlxsw: core: Reset firmware after flash during driver initializationShalom Toledo1-4/+28
After flashing new firmware during the driver initialization flow (reload or not), the driver should do a firmware reset when it gets -EAGAIN in order to load the new one. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-29mlxsw: core: Fix devlink unregister flowShalom Toledo1-7/+17
After a failed reload, the driver is still registered to devlink, its devlink instance is still allocated and the 'reload_fail' flag is set. Then, in the next reload try, the driver's allocated devlink instance will be freed without unregistering from devlink and its components (e.g, resources). This scenario can cause a use-after-free if the user tries to execute command via devlink user-space tool. Fix by not freeing the devlink instance during reload (failed or not). Fixes: 24cc68ad6c46 ("mlxsw: core: Add support for reload") Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-17mlxsw: core: Fix use-after-free when flashing firmware during initIdo Schimmel1-0/+2
When the switch driver (e.g., mlxsw_spectrum) determines it needs to flash a new firmware version it resets the ASIC after the flashing process. The bus driver (e.g., mlxsw_pci) then registers itself again with mlxsw_core which means (among other things) that the device registers itself again with the hwmon subsystem again. Since the device was registered with the hwmon subsystem using devm_hwmon_device_register_with_groups(), then the old hwmon device (registered before the flashing) was never unregistered and was referencing stale data, resulting in a use-after free. Fix by removing reliance on device managed APIs in mlxsw_hwmon_init(). Fixes: c86d62cc410c ("mlxsw: spectrum: Reset FW after flash") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alexander Petrovskiy <alexpe@mellanox.com> Tested-by: Alexander Petrovskiy <alexpe@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: core: remove unnecessary function mlxsw_core_driver_putYueHaibing1-12/+0
The function mlxsw_core_driver_put only traverse mlxsw_core_driver_list to find the matched mlxsw_driver,but never used it. So it can be removed safely. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko1-35/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05mlxsw: Add extack messages for port_{un, }split failuresDavid Ahern1-4/+10
Return messages in extack for port split/unsplit errors. e.g., $ devlink port split swp1s1 count 4 Error: mlxsw_spectrum: Port cannot be split further. devlink answers: Invalid argument $ devlink port unsplit swp4 Error: mlxsw_spectrum: Port was not split. devlink answers: Invalid argument Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05devlink: Add extack to reload and port_{un, }split operationsDavid Ahern1-3/+6
Add extack argument to reload, port_split and port_unsplit operations. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: pci: Utilize MRSR register to perform FW resetJiri Pirko1-3/+1
So far, the PCI BAR0 register is used for triggering FW reset. However, that is a legacy attitude and it is recommended to use MRSR to perform reset instead. So do that. Move the reset into init() function as the cmd interface needs to be used. With that, IRQ initialization needs to be moved as well. As a side effect, the reset move simplifies the devlink reload flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: cmd: Handle error after reset gracefullyJiri Pirko1-7/+19
There is an exception in command interface processing in case the MRSR register is written to. The register triggers FW reset and during the reset FW returns an error. So handle this by ignoring this error while writing to MRSR register. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19mlxsw: use devlink helper to generate physical port nameJiri Pirko1-0/+11
Since devlink knows the info needed to generate the physical port name in a generic way for all devlink users, use the helper to do the job. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: extend attrs_set for setting port flavoursJiri Pirko1-2/+2
Devlink ports can have specific flavour according to the purpose of use. This patch extend attrs_set so the driver can say which flavour port has. Initial flavours are: physical, cpu, dsa User can query this to see right away what is the purpose of each port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: introduce devlink_port_attrs_setJiri Pirko1-3/+4
Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'Christophe JAILLET1-2/+2
Resources are not freed in the reverse order of the allocation. Labels are also mixed-up. Fix it and reorder code and labels in the error handling path of 'mlxsw_core_bus_device_register()' Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: Move "resources_query_enable" out of mlxsw_config_profileJiri Pirko1-2/+3
As struct mlxsw_config_profile is mapped to the payload of the FW command of the same name, resources_query_enable flag does not belong there. Move it to struct mlxsw_driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: core: Add support for reloadArkadi Sharshevsky1-17/+56
Add support for hot reload. First, all the driver/core resources are released but the PCI and devlink instances, then reset is performed through the PCI interface. Finally the driver performs initialization. In case of reload failure the driver is left in a partially initialized state. Special care is taken during the driver removal in order to properly handle this state. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: pci: Add support for getting resource through devlinkArkadi Sharshevsky1-0/+16
Up until now the KVD partition was static. This patch introduces the ability to get the resource sizes via devlink. In case the resource is not available the default configuration is used. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: spectrum: Register KVD resources with devlinkArkadi Sharshevsky1-0/+9
Register the KVD resources with devlink. The KVD is a memory resource which is subdivided into three partitions which are the linear, hash single and hash double. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-18mlxsw: core: Fix possible deadlockIdo Schimmel1-1/+10
When an EMAD is transmitted, a timeout work item is scheduled with a delay of 200ms, so that another EMAD will be retried until a maximum of five retries. In certain situations, it's possible for the function waiting on the EMAD to be associated with a work item that is queued on the same workqueue (`mlxsw_core`) as the timeout work item. This results in flushing a work item on the same workqueue. According to commit e159489baa71 ("workqueue: relax lockdep annotation on flush_work()") the above may lead to a deadlock in case the workqueue has only one worker active or if the system in under memory pressure and the rescue worker is in use. The latter explains the very rare and random nature of the lockdep splats we have been seeing: [ 52.730240] ============================================ [ 52.736179] WARNING: possible recursive locking detected [ 52.742119] 4.14.0-rc3jiri+ #4 Not tainted [ 52.746697] -------------------------------------------- [ 52.752635] kworker/1:3/599 is trying to acquire lock: [ 52.758378] (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c4fa4>] flush_work+0x3a4/0x5e0 [ 52.767837] but task is already holding lock: [ 52.774360] (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0 [ 52.784495] other info that might help us debug this: [ 52.791794] Possible unsafe locking scenario: [ 52.798413] CPU0 [ 52.801144] ---- [ 52.803875] lock(mlxsw_core_driver_name); [ 52.808556] lock(mlxsw_core_driver_name); [ 52.813236] *** DEADLOCK *** [ 52.819857] May be due to missing lock nesting notation [ 52.827450] 3 locks held by kworker/1:3/599: [ 52.832221] #0: (mlxsw_core_driver_name){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0 [ 52.842846] #1: ((&(&bridge->fdb_notify.dw)->work)){+.+.}, at: [<ffffffff811c65c4>] process_one_work+0x7d4/0x12f0 [ 52.854537] #2: (rtnl_mutex){+.+.}, at: [<ffffffff822ad8e7>] rtnl_lock+0x17/0x20 [ 52.863021] stack backtrace: [ 52.867890] CPU: 1 PID: 599 Comm: kworker/1:3 Not tainted 4.14.0-rc3jiri+ #4 [ 52.875773] Hardware name: Mellanox Technologies Ltd. "MSN2100-CB2F"/"SA001017", BIOS 5.6.5 06/07/2016 [ 52.886267] Workqueue: mlxsw_core mlxsw_sp_fdb_notify_work [mlxsw_spectrum] [ 52.894060] Call Trace: [ 52.909122] __lock_acquire+0xf6f/0x2a10 [ 53.025412] lock_acquire+0x158/0x440 [ 53.047557] flush_work+0x3c4/0x5e0 [ 53.087571] __cancel_work_timer+0x3ca/0x5e0 [ 53.177051] cancel_delayed_work_sync+0x13/0x20 [ 53.182142] mlxsw_reg_trans_bulk_wait+0x12d/0x7a0 [mlxsw_core] [ 53.194571] mlxsw_core_reg_access+0x586/0x990 [mlxsw_core] [ 53.225365] mlxsw_reg_query+0x10/0x20 [mlxsw_core] [ 53.230882] mlxsw_sp_fdb_notify_work+0x2a3/0x9d0 [mlxsw_spectrum] [ 53.237801] process_one_work+0x8f1/0x12f0 [ 53.321804] worker_thread+0x1fd/0x10c0 [ 53.435158] kthread+0x28e/0x370 [ 53.448703] ret_from_fork+0x2a/0x40 [ 53.453017] mlxsw_spectrum 0000:01:00.0: EMAD retries (2/5) (tid=bf4549b100000774) [ 53.453119] mlxsw_spectrum 0000:01:00.0: EMAD retries (5/5) (tid=bf4549b100000770) [ 53.453132] mlxsw_spectrum 0000:01:00.0: EMAD reg access failed (tid=bf4549b100000770,reg_id=200b(sfn),type=query,status=0(operation performed)) [ 53.453143] mlxsw_spectrum 0000:01:00.0: Failed to get FDB notifications Fix this by creating another workqueue for EMAD timeouts, thereby preventing the situation of a work item trying to flush a work item queued on the same workqueue. Fixes: caf7297e7ab5f ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02mlxsw: core: Use correct EMAD transaction ID in debug messageIdo Schimmel1-1/+1
'trans->tid' is only assigned later in the function, resulting in a zero transaction ID. Use 'tid' instead. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24mlxsw: Query maximum number of ports from firmwareIdo Schimmel1-4/+42
We currently hard code the maximum number of ports in the driver, but this may change in future devices, so query it from the firmware instead. Fallback to a maximum of 64 ports in case this number can't be queried. This should only happen in SwitchX-2 for which this number is correct. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-23mlxsw: Remove debugfs interfaceIdo Schimmel1-177/+0
We don't use it during development and we can't extend it either, so remove it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06mlxsw: core: Queue work immediately instead of delaying itIdo Schimmel1-3/+3
We always use zero delay before queueing a work on the ordered workqueue ('mlxsw_owq'), so use work_struct directly instead of delayable work. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03mlxsw: core: Create an ordered workqueue for FIB offloadIdo Schimmel1-0/+22
We're going to start processing FIB entries addition / deletion events in deferred work. These work items must be processed in the order they were submitted or otherwise we can have differences between the kernel's FIB table and the device's. Solve this by creating an ordered workqueue to which these work items will be submitted to. Note that we can't simply convert the current workqueue to be ordered, as EMADs re-transmissions are also processed in deferred work. Later on, we can migrate other work items to this workqueue, such as FDB notification processing and nexthop resolution, since they all take the same lock anyway. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29mlxsw: core: Change order of operations in removal pathIdo Schimmel1-1/+1
We call bus->init() before allocating 'lag.mapping'. Change the order of operations in removal path to reflect that. This makes the error path of mlxsw_core_bus_device_register() symmetric with mlxsw_core_bus_device_unregister(). Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29mlxsw: core: Add missing rollback in error pathIdo Schimmel1-0/+1
Without this rollback, the thermal zone is still registered during the error path, whereas its private data is freed upon the destruction of the underlying bus device due to the use of devm_kzalloc(). This results in use after free. Fix this by calling mlxsw_thermal_fini() from the appropriate place in the error path. Fixes: a50c1e35650b ("mlxsw: core: Implement thermal zone") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Change emad trap group settingsNogah Frankel1-39/+10
Currently, the emad trap init was done in the core. In the future we will want to add some changes to the traps groups, according to device type. This commit create a driver function to create the trap group for the emad, so later it can be changed by devices. It also changes the emad registration to use the new generic functions. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: Change trap set functionNogah Frankel1-5/+9
Change trap setting function so instead of determining the trap group by trap id, it gets it as a parameter (so later we can have different trap groups for Spectrum and Switchx2). Add "is_ctrl" parameter to the trap setting function. It control whether the trapped packets wait in a designated control buffer or in their default one. This parameter is ignored by Switchx2 and Switchib. Add these parameters to the traps array in Spectrum, Switchx2 and Switchib. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-25mlxsw: core: Create a generic function to register / unregister trapsNogah Frankel1-0/+67
We have 2 types of HW traps to handle, rx traps and events. The registration workflow for both is very similar. So it only make sense to create one function to handle both. This patch creates a struct to hold the data for both cases. It also creates a registration and an un-registration functions that get this generic struct as input. Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-22mlxsw: core: Implement thermal zoneIvan Vecera1-0/+8
Implement thermal zone for mlxsw based HW. It uses temperature sensor provided by ASIC (the same as mlxsw hwmon interface) to report current temp to thermal core. The ASIC's PWM is then used to control speed of system fans registered as cooling devices. Signed-off-by: Ivan Vecera <cera@cera.cz> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Invoke driver's init/fini methods only if definedVadim Pasternak1-5/+9
We are going to add a minimal driver on top of the mlxsw core infrastructure, which will be mainly used for hardware monitoring in Baseboard management controller (BMC) installations. Unlike the switch drivers (e.g., spectrum, switchx2), this driver does not initialize the ASIC and therefore doesn't need to implement the init() and fini() methods in its 'mlxsw_driver' struct. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Add bus capability flagVadim Pasternak1-0/+6
The mlxsw core infrastructure currently assumes that communication with the ASIC is always possible using Ethernet management datagrams (EMADs), but this is only possible when the PCI bus is used. The bus capability flag is added to indicate EMAD support and make core initialize EMAD communication only when it's set. Otherwise, register access is done using command interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.