aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/i2c.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko1-1/+1
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30mlxsw: i2c: Allow flexible setting of I2C transactions sizeVadim Pasternak1-18/+46
Current implementation uses fixed size of I2C data transaction buffer. Allow to set size of I2C transactions according to I2C physical adapter capability. For that purpose adapter read and write size is obtained from the I2C physical adapter and buffer size is set according to the minimum of these two values. If adapter does not provide such info, default buffer size is to be used. It allows to improve performance of I2C access to silicon when long size transactions are used. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-30mlxsw: i2c: Extend initialization with querying firmware infoVadim Pasternak1-0/+12
Extend initialization flow with query request for firmware info in order to obtain firmware version info. This info is to be provided to minimal driver to support ethtool get_drvinfo() interface. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend initialization by querying resources dataVadim Pasternak1-1/+11
Extend initialization flow by query requests for chip resources data in order to obtain chip's specific capabilities, like the number of ports. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Extend input parameters list of command APIVadim Pasternak1-19/+101
Extend input parameters list of command API in mlxsw_i2c_cmd() in order to support initialization commands. Up until now, only access commands were supported by I2C driver. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Modify input parameter name in initialization APIVadim Pasternak1-1/+1
Change input parameter name "resource" to "res" in mlxsw_i2c_init() in order to align it with mlxsw_pci_init(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-03mlxsw: i2c: Fix comment misspellingVadim Pasternak1-1/+1
Fix comment for mlxsw_i2c_write_cmd(). Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-13mlxsw: core: Set different thermal polling time based on bus frequency capabilityVadim Pasternak1-0/+1
Add low frequency bus capability in order to allow core functionality separation based on bus type. Driver could run over PCIe, which is considered as high frequency bus or I2C, which is considered as low frequency bus. In the last case time setting, for example, for thermal polling interval, should be increased. Use different thermal monitoring based on bus type. For I2C bus time is set to 20 seconds, while for PCIe 1 second polling interval is used. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10mlxsw: remove unused arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_nameColin Ian King1-2/+0
Arrays mlxsw_i2c_driver_name and mlxsw_pci_driver_name are defined but never used hence they are redundant and can be removed. Cleans up clang warnings: warning: 'mlxsw_i2c_driver_name' defined but not used warning: 'mlxsw_pci_driver_name' defined but not used Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09mlxsw: Replace license text with SPDX identifiers and adjust copyrightsJiri Pirko1-33/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-16mlxsw: core: Add support for reloadArkadi Sharshevsky1-2/+3
Add support for hot reload. First, all the driver/core resources are released but the PCI and devlink instances, then reset is performed through the PCI interface. Finally the driver performs initialization. In case of reload failure the driver is left in a partially initialized state. Special care is taken during the driver removal in order to properly handle this state. Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-01mlxsw: i2c: Fix buffer increment counter for write transactionVadim Pasternak1-1/+1
It fixes a problem for the last chunk where 'chunk_size' is smaller than MLXSW_I2C_BLK_MAX and data is copied to the wrong offset, overriding previous data. Fixes: 6882b0aee180 ("mlxsw: Introduce support for I2C bus") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09mlxsw: Fix mlxsw_i2c_write return valueElad Raz1-1/+1
The "err" variable is been checked, return always 0. Signed-off-by: Elad Raz <eladr@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16mlxsw: Introduce support for I2C busVadim Pasternak1-0/+582
Add I2C bus implementation for Mellanox Technologies Switch ASICs. This includes command interface implementation using input / out mailboxes, whose location is retrieved from the firmware during probe time. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.