aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/reg.h (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2015-10-16mlxsw: reg: Add Switch Virtual-Port Enabling register definitionIdo Schimmel1-0/+38
In order for a port to support {Port, VID} to FID mapping it needs to be configured to a virtual port mode (as opposed to VLAN mode). Add the SVPE register, which enables port virtualization. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch VID to FID Allocation register definitionIdo Schimmel1-0/+95
An incoming packet can be classified into a filtering identifer (FID) based on its VID or incoming port and VID ({Port, VID}). Add the SVFA register, which controls this mapping. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FID Management register definitionIdo Schimmel1-0/+87
Filtering identifiers (FIDs) are unique identifers of bridge instances in the hardware. Add the SFMR register, which is responsible for the creation and configuration of these FIDs. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add shared buffer configuration registers definitionsJiri Pirko1-0/+349
Add definitions of SBPR, SBCM, SBPM, SBMM and PBMC registers that are used to configure shared buffers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Port VID and Switch Port VLAN Membership registers definitionsElad Raz1-0/+146
Add SPVID and SPVM registers responsible for default port VID configuration and VLAN membership of a port. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch FDB Notification register definitionJiri Pirko1-0/+101
Add SFN register which is used to poll for newly added and aged-out FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: reg: Add Switch Filtering Database register definitionJiri Pirko1-0/+216
Add the SFD register which is responsible for filtering database manipulation, including static and dynamic FDB entries. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Add MLXSW_ITEM_BUF_INDEXED helperJiri Pirko1-6/+40
Add missing item helper which allows to access char bufs on multiple offsets. This is needed by SFD and SFN register definitions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: item: Make src arg of memcpy_to helper constJiri Pirko1-2/+2
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce FID-offset flooding tablesIdo Schimmel3-0/+18
Packets destined to offloaded netdevs will be classified to FIDs in the device and flooded in case of BUM. The flooding table used is of type FID-offset, which allows one to create different flooding domains for different FIDs and specify the offset in the flooding table for each FID (not necessarily equal to FID or VID). Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: cmd: Introduce per-FID flooding tablesIdo Schimmel3-0/+19
In the newly introduced Spectrum switch ASIC, packets destined to not offloaded netdevs will be classified to special FIDs (vFIDs) in the device and flooded to the CPU port. The flooding table used is of type per-FID, which allows one to create different flooding domains for different vFIDs. While using a simple single-entry flood table is certainly sufficient at this point, we do plan to offload 802.1D bridges involving VLAN interfaces, thus making this change necessary. Add support for this flooding table type, by exposing the configuration of the number of tables from this type and their size. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16mlxsw: Enable configuration of flooding domainsIdo Schimmel2-4/+5
As part of the introduction of L2 offloads, allow different ports to join/leave the flooding domain, according to user configuration. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16net: introduce pre-change upper device notifierJiri Pirko2-0/+10
This newly introduced netdevice notifier is called before actual change upper happens. That provides a possibility for notifier handlers to know upper change will happen and react to it, including possibility to forbid the change. That is valuable for drivers which can check if the upper device linkage is supported and forbid that in case it is not. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16timekeeping: Increment clock_was_set_seq in timekeeping_init()Thomas Gleixner1-1/+1
timekeeping_init() can set the wall time offset, so we need to increment the clock_was_set_seq counter. That way hrtimers will pick up the early offset immediately. Otherwise on a machine which does not set wall time later in the boot process the hrtimer offset is stale at 0 and wall time timers are going to expire with a delay of 45 years. Fixes: 868a3e915f7f "hrtimer: Make offset update smarter" Reported-and-tested-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Stefan Liebler <stli@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org>
2015-10-16i40e/i40evf: Bump i40e to 1.3.34 and i40evf to 1.3.21Catherine Sullivan2-2/+2
Bump. Change-ID: I7ec818a507554648675b9b245ced9e6b6bd9ed4e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: increase AQ work limitMitch Williams1-1/+1
With 64 VFs, we can easily overwhelm the AQ on the PF if we have too low a limit on the number of AQ requests. This leads to ARQ overflow errors, and occasionally VFs that fail to initialize. Since we really only hit this condition on initial VF driver load, the requests that we process are lightweight, so this extra work doesn't cause problems for the PF driver. Change-ID: I620221520d8af987df6ace9ba938ffaf22107681 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: relax and stagger init timing a bitMitch Williams2-3/+3
On some devices, in some systems, in some configurations, the VFs would fail to initialize the first time you loaded the driver. To correct this, increase the delay time for the init task slightly, and wait longer before giving up. If we enable VFs and load the VF driver in the same kernel as the PF driver, we can totally overwhelm the PF driver with AQ requests because all of the instances try to initialize at the same time. To help alleviate this, stagger the initial scheduling of the init task using the PCIe function as a multiplier. We mask off the function to only three bits so no instance has to wait too long. With these two changes, initializing 128 VFs on a single device goes from four minutes to just a few seconds. Change-ID: If3d8720c1c4e838ab36d8781d9ec295a62380936 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Recognize 1000Base_T_Optical phy type when link is upCatherine Sullivan1-0/+6
1000Base_T_Optical got added to the function that figures out what is supported when link is down but not when link is up. Add it in there too so that we display the correct information. Change-ID: I85ebcdfa7c02d898c44c673b1500552a53c8042e Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: correctly populate vlan_featuresMitch Williams1-1/+4
The vlan_features field was correctly being set to the same value as the netdev features field. However, this was being done before the features were actually being set up, leaving the vlan_features empty. Also, after a reset, vlan_features will be incorrectly assigned the previous netdev feature flags, which can contain VLAN feature bits. This makes the VLAN code angry and will cause a stack dump. To fix these issues, set up the netdev features first, then mask out the VLAN feature bits when assigning vlan_features. Change-ID: Ib0548869dc83cf6a841cb8697dd94c12359ba4d2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: reset the invalid msg counter in vf when a valid msg is receivedJingjing Wu2-1/+4
When the number of invalid messages from a VF is exceeded, the VF will be disabled, due to the invalid messages. This happens if other VF drivers (like DPDK) send a message through the driver's mailbox (aka virtchannel) interface, but the message is not supported by the i40e pf driver, such as CONFIG_PROMISCUOUS_MODE. This patch changes the num_invalid_msgs in struct i40e_vf to record the continuous invalid msgs, and it will be reset when a valid msg is received. Change-ID: Iaec42fd3dcdd281476b3518be23261dd46fc3718 Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: moderate interrupts differentlyJesse Brandeburg5-3/+52
The XL710 hardware has a different interrupt moderation design that can support a limit of total interrupts per second per vector, in addition to the "number of interrupts per second" controls already established in the driver. This combination of hardware features allows us to set very low default latency settings but minimize the total CPU utilization by not making too many interrupts, should the user desire. The current driver implementation is still enabling the dynamic moderation in the driver, and only using the rx/tx-usecs limit in ethtool to limit the interrupt rate per second, by default. The new code implemented in this patch 2) adds init/use of the new "Interrupt Limit" register 3) adds ethtool knob to control/report the limits above Usage is ethtool -C ethx rx-usecs-high <value> Where <value> is number of microseconds to create a rate of 1/N interrupts per second, regardless of rx-usecs or tx-usecs values. Since there is a credit based scheme in the hardware, the rx-usecs and tx-usecs can be configured for very low latency for short bursts, but once the credit runs out the refill rate on the credits is limited by rx-usecs-high. Change-ID: I3a1075d3296123b0f4f50623c779b027af5b188d Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Add support for non-willing AppsGreg Bowers2-0/+9
Adds support for setting a new bit in the Set Local LLDP MIB AQ command Type field. When set to 1, the bit indicates to FW that Apps should be treated as non-willing. When 0, FW behaves as before. Change-ID: I0d2101c1606c59c7188d3e6a0c7810e0f205233a Signed-off-by: Greg Bowers <gregory.j.bowers@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: priv flag for controlling VEB statsShannon Nelson2-0/+9
Add an ethtool priv flag to enable and disable printing the VEB statistics. Change-ID: I7654054a3a73b08aa8310d94ee8fce6219107dd8 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: Removed unused definesGreg Rose1-2/+0
Two defines that are not used are causing customer confusion - remove them. Change-ID: Icef0325aca8e0f4fcdfc519e026bdd375e791200 Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: remove read/write failed messages from nvmupdateShannon Nelson1-7/+2
Allow the nvmupdate application to decide when a read or write error should be exposed to the user. Since the application needs to use write probes to find the ReadOnly sections on a potentially unknown NVM version in the HW and read probes to check the status of the last write, some error messages are expected, but need not be shown to the users. The driver doesn't know which are ignorable from real errors, so needs to let the application make the decision. Change-ID: I78fca8ab672bede11c10c820b83c26adfd536d03 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Fix compile issue related to const stringJingjing Wu5-9/+9
Add const to functions that return strings that aren't going to be modified. This addresses some reported compile complaints. Change-ID: Ic56b1e814ab4d23a50480e7fdec652445f776ee8 Signed-off-by: Jingjing Wu <jingjing.wu@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e: generate fewer startup messagesShannon Nelson4-13/+17
Cut down on the number of startup log entries by putting a couple behind debug flags and combining a couple others into a single line. Change-ID: I708089f086308f84d43f8b6f0e8a634a02d058fb Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16drivers/net/intel: use napi_complete_done()Jesse Brandeburg9-33/+55
As per Eric Dumazet's previous patches: (see commit (24d2e4a50737) - tg3: use napi_complete_done()) Quoting verbatim: Using napi_complete_done() instead of napi_complete() allows us to use /sys/class/net/ethX/gro_flush_timeout GRO layer can aggregate more packets if the flush is delayed a bit, without having to set too big coalescing parameters that impact latencies. </end quote> Tested configuration: low latency via ethtool -C ethx adaptive-rx off rx-usecs 10 adaptive-tx off tx-usecs 15 workload: streaming rx using netperf TCP_MAERTS igb: MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.48 10^6bits/s over 1.000 seconds ending at 1440193171.589 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1176930056 1475.36 797726 16384.00 71905 MIGRATED TCP MAERTS TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 10.0.0.1 () port 0 AF_INET : demo ... Interim result: 941.49 10^6bits/s over 0.997 seconds ending at 1440193142.763 Alignment Offset Bytes Bytes Recvs Bytes Sends Local Remote Local Remote Xfered Per Per Recv Send Recv Send Recv (avg) Send (avg) 8 8 0 0 1175182320 50476.00 23282 16384.00 71816 i40e: Hard to test because the traffic is incoming so fast (24Gb/s) that GRO always receives 87kB, even at the highest interrupt rate. Other drivers were only compile tested. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40evf: Add support for netpollAlexander Duyck1-0/+26
Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Drop useless "IN_NETPOLL" flagAlexander Duyck5-17/+2
The code in i40e and i40evf is using an "IN_NETPOLL" flag that has never added any value due to the fact that the Rx clean-up is handled in NAPI. As such the flag was set, the queue was scheduled via NAPI, and then polled from the netpoll controller and if any Rx packets were processed the were processed in the wrong context. In addition the flag itself just added an unneeded conditional to the hot-path so it can safely be dropped and save us a few instructions. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16i40e/i40evf: Fix handling of napi budgetAlexander Duyck2-0/+10
The polling routine for i40e was rounding up the budget for Rx cleanup to 1. This is incorrect as the netpoll poll call is expecting no Rx to be processed as the budget passed was 0. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-16genirq/msi: Do not use pci_msi_[un]mask_irq as default methodsMarc Zyngier2-5/+5
When we create a generic MSI domain, that MSI_FLAG_USE_DEF_CHIP_OPS is set, and that any of .mask or .unmask are NULL in the irq_chip structure, we set them to pci_msi_[un]mask_irq. This is a bad idea for at least two reasons: - PCI_MSI might not be selected, kernel fails to build (yes, this is legitimate, at least on arm64!) - This may not be a PCI/MSI domain at all (platform MSI, for example) Either way, this looks wrong. Move the overriding of mask/unmask to the PCI counterpart, and panic is any of these two methods is not set in the core code (they really should be present). Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Link: http://lkml.kernel.org/r/1444760085-27857-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-16net: Fix suspicious RCU usage in fib_rebalanceDavid Ahern1-2/+2
This command: ip route add 192.168.1.0/24 nexthop via 10.2.1.5 dev eth1 nexthop via 10.2.2.5 dev eth2 generated this suspicious RCU usage message: [ 63.249262] [ 63.249939] =============================== [ 63.251571] [ INFO: suspicious RCU usage. ] [ 63.253250] 4.3.0-rc3+ #298 Not tainted [ 63.254724] ------------------------------- [ 63.256401] ../include/linux/inetdevice.h:205 suspicious rcu_dereference_check() usage! [ 63.259450] [ 63.259450] other info that might help us debug this: [ 63.259450] [ 63.262297] [ 63.262297] rcu_scheduler_active = 1, debug_locks = 1 [ 63.264647] 1 lock held by ip/2870: [ 63.265896] #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff813ebfb7>] rtnl_lock+0x12/0x14 [ 63.268858] [ 63.268858] stack backtrace: [ 63.270409] CPU: 4 PID: 2870 Comm: ip Not tainted 4.3.0-rc3+ #298 [ 63.272478] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 63.275745] 0000000000000001 ffff8800b8c9f8b8 ffffffff8125f73c ffff88013afcf301 [ 63.278185] ffff8800bab7a380 ffff8800b8c9f8e8 ffffffff8107bf30 ffff8800bb728000 [ 63.280634] ffff880139fe9a60 0000000000000000 ffff880139fe9a00 ffff8800b8c9f908 [ 63.283177] Call Trace: [ 63.283959] [<ffffffff8125f73c>] dump_stack+0x4c/0x68 [ 63.285593] [<ffffffff8107bf30>] lockdep_rcu_suspicious+0xfa/0x103 [ 63.287500] [<ffffffff8144d752>] __in_dev_get_rcu+0x48/0x4f [ 63.289169] [<ffffffff8144d797>] fib_rebalance+0x3e/0x127 [ 63.290753] [<ffffffff8144d986>] ? rcu_read_unlock+0x3e/0x5f [ 63.292442] [<ffffffff8144ea45>] fib_create_info+0xaf9/0xdcc [ 63.294093] [<ffffffff8106c12f>] ? sched_clock_local+0x12/0x75 [ 63.295791] [<ffffffff8145236a>] fib_table_insert+0x8c/0x451 [ 63.297493] [<ffffffff8144bf9c>] ? fib_get_table+0x36/0x43 [ 63.299109] [<ffffffff8144c3ca>] inet_rtm_newroute+0x43/0x51 [ 63.300709] [<ffffffff813ef684>] rtnetlink_rcv_msg+0x182/0x195 [ 63.302334] [<ffffffff8107d04c>] ? trace_hardirqs_on+0xd/0xf [ 63.303888] [<ffffffff813ebfb7>] ? rtnl_lock+0x12/0x14 [ 63.305346] [<ffffffff813ef502>] ? __rtnl_unlock+0x12/0x12 [ 63.306878] [<ffffffff81407c4c>] netlink_rcv_skb+0x3d/0x90 [ 63.308437] [<ffffffff813ec00e>] rtnetlink_rcv+0x21/0x28 [ 63.309916] [<ffffffff81407742>] netlink_unicast+0xfa/0x17f [ 63.311447] [<ffffffff81407a5e>] netlink_sendmsg+0x297/0x2dc [ 63.313029] [<ffffffff813c6cd4>] sock_sendmsg_nosec+0x12/0x1d [ 63.314597] [<ffffffff813c835b>] ___sys_sendmsg+0x196/0x21b [ 63.316125] [<ffffffff8100bf9f>] ? native_sched_clock+0x1f/0x3c [ 63.317671] [<ffffffff8106c12f>] ? sched_clock_local+0x12/0x75 [ 63.319185] [<ffffffff8106c397>] ? sched_clock_cpu+0x9d/0xb6 [ 63.320693] [<ffffffff8107e2d7>] ? __lock_is_held+0x32/0x54 [ 63.322145] [<ffffffff81159fcb>] ? __fget_light+0x4b/0x77 [ 63.323541] [<ffffffff813c8726>] __sys_sendmsg+0x3d/0x5b [ 63.324947] [<ffffffff813c8751>] SyS_sendmsg+0xd/0x19 [ 63.326274] [<ffffffff814c8f57>] entry_SYSCALL_64_fastpath+0x12/0x6f It looks like all of the code paths to fib_rebalance are under rtnl. Fixes: 0e884c78ee19 ("ipv4: L3 hash-based multipath") Cc: Peter Nørlund <pch@ordbogen.com> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16via-rhine: fix VLAN receive handling regression.Andrej Ota1-1/+2
Because eth_type_trans() consumes ethernet header worth of bytes, a call to read TCI from end of packet using rhine_rx_vlan_tag() no longer works as it's reading from an invalid offset. Tested to be working on PCEngines Alix board. Fixes: 810f19bcb862 ("via-rhine: add consistent memory barrier in vlan receive code.") Signed-off-by: Andrej Ota <andrej@ota.si> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16bpf: Need to call bpf_prog_uncharge_memlock from bpf_prog_putTom Herbert1-0/+1
Currently, is only called from __prog_put_rcu in the bpf_prog_release path. Need this to call this from bpf_prog_put also to get correct accounting. Fixes: aaac3ba95e4c8b49 ("bpf: charge user for creation of BPF maps and programs") Signed-off-by: Tom Herbert <tom@herbertland.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16tcp/dccp: fix race at listener dismantle phaseEric Dumazet3-48/+51
Under stress, a close() on a listener can trigger the WARN_ON(sk->sk_ack_backlog) in inet_csk_listen_stop() We need to test if listener is still active before queueing a child in inet_csk_reqsk_queue_add() Create a common inet_child_forget() helper, and use it from inet_csk_reqsk_queue_add() and inet_csk_listen_stop() Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16tcp/dccp: add inet_csk_reqsk_queue_drop_and_put() helperEric Dumazet6-6/+13
Let's reduce the confusion about inet_csk_reqsk_queue_drop() : In many cases we also need to release reference on request socket, so add a helper to do this, reducing code size and complexity. Fixes: 4bdc3d66147b ("tcp/dccp: fix behavior of stale SYN_RECV request sockets") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Revert "inet: fix double request socket freeing"Eric Dumazet2-3/+3
This reverts commit c69736696cf3742b37d850289dc0d7ead177bb14. At the time of above commit, tcp_req_err() and dccp_req_err() were dead code, as SYN_RECV request sockets were not yet in ehash table. Real bug was fixed later in a different commit. We need to revert to not leak a refcount on request socket. inet_csk_reqsk_queue_drop_and_put() will be added in following commit to make clean inet_csk_reqsk_queue_drop() does not release the reference owned by caller. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16ipv6: Initialize rt6_info properly in ip6_blackhole_route()Martin KaFai Lau1-15/+5
ip6_blackhole_route() does not initialize the newly allocated rt6_info properly. This patch: 1. Call rt6_info_init() to initialize rt6i_siblings and rt6i_uncached 2. The current rt->dst._metrics init code is incorrect: - 'rt->dst._metrics = ort->dst._metris' is not always safe - Not sure what dst_copy_metrics() is trying to do here considering ip6_rt_blackhole_cow_metrics() always returns NULL Fix: - Always do dst_copy_metrics() - Replace ip6_rt_blackhole_cow_metrics() with dst_cow_metrics_generic() 3. Mask out the RTF_PCPU bit from the newly allocated blackhole route. This bug triggers an oops (reported by Phil Sutter) in rt6_get_cookie(). It is because RTF_PCPU is set while rt->dst.from is NULL. Fixes: d52d3997f843 ("ipv6: Create percpu rt6_info") Signed-off-by: Martin KaFai Lau <kafai@fb.com> Reported-by: Phil Sutter <phil@nwl.cc> Tested-by: Phil Sutter <phil@nwl.cc> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16ipv6: Move common init code for rt6_info to a new function rt6_info_init()Martin KaFai Lau1-6/+11
Introduce rt6_info_init() to do the common init work for 'struct rt6_info' (after calling dst_alloc). It is a prep work to fix the rt6_info init logic in the ip6_blackhole_route(). Signed-off-by: Martin KaFai Lau <kafai@fb.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: Julian Anastasov <ja@ssi.bg> Cc: Phil Sutter <phil@nwl.cc> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16Bluetooth: Fix initializing conn_params in scan phaseJakub Pawlowski2-8/+20
This patch makes sure that conn_params that were created just for explicit_connect, will get properly deleted during cleanup. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16Bluetooth: Fix conn_params list update in hci_connect_le_scan_cleanupJohan Hedberg1-4/+19
After clearing the params->explicit_connect variable the parameters may need to be either added back to the right list or potentially left absent from both the le_reports and the le_conns lists. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16Bluetooth: Fix remove_device behavior for explicit connectsJohan Hedberg1-1/+6
Devices undergoing an explicit connect should not have their conn_params struct removed by the mgmt Remove Device command. This patch fixes the necessary checks in the command handler to correct the behavior. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16Bluetooth: Fix LE reconnection logicJohan Hedberg4-12/+8
We can't use hci_explicit_connect_lookup() since that would only cover explicit connections, leaving normal reconnections completely untouched. Not using it in turn means leaving out entries in pend_le_reports. To fix this and simplify the logic move conn params from the reports list to the pend_le_conns list for the duration of an explicit connect. Once the connect is complete move the params back to the pend_le_reports list. This also means that the explicit connect lookup function only needs to look into the pend_le_conns list. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16Bluetooth: Fix reference counting for LE-scan based connectionsJohan Hedberg1-17/+36
The code should never directly call hci_conn_hash_del since many cleanup & reference counting updates would be lost. Normally hci_conn_del is the right thing to do, but in the case of a connection doing LE scanning this could cause a deadlock due to doing a cancel_delayed_work_sync() on the same work callback that we were called from. Connections in the LE scanning state actually need very little cleanup - just a small subset of hci_conn_del. To solve the issue, refactor out these essential pieces into a new hci_conn_cleanup() function and call that from the two necessary places. Signed-off-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16Bluetooth: Fix double scan updatesJakub Pawlowski3-5/+15
When disable/enable scan command is issued twice, some controllers will return an error for the second request, i.e. requests with this command will fail on some controllers, and succeed on others. This patch makes sure that unnecessary scan disable/enable commands are not issued. When adding device to the auto connect whitelist when there is pending connect attempt, there is no need to update scan. hci_connect_le_scan_cleanup is conditionally executing hci_conn_params_del, that is calling hci_update_background_scan. Make the other case also update scan, and remove reduntand call from hci_connect_le_scan_remove. When stopping interleaved discovery the state should be set to stopped only when both LE scanning and discovery has stopped. Signed-off-by: Jakub Pawlowski <jpawlowski@google.com> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera50-113/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: update node FSM when peer RESET message is receivedJon Paul Maloy3-6/+13
The change made in the previous commit revealed a small flaw in the way the node FSM is updated. When the function tipc_node_link_down() is called for the last link to a node, we should check whether this was caused by a local reset or by a received RESET message from the peer. In the latter case, we can directly issue a PEER_LOST_CONTACT_EVT to the node FSM, so that it is ready to re-establish contact. If this is not done, the peer node will sometimes have to go through a second establish cycle before the link becomes stable. We fix this in this commit by conditionally issuing the mentioned event in the function tipc_node_link_down(). We also move LINK_RESET FSM even away from the link_reset() function and into the caller function, partially because it is easier to follow the code when state changes are gathered at a limited number of locations, partially because there will be cases in future commits where we don't want the link to go RESET mode when link_reset() is called. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: send out RESET immediately when link goes downJon Paul Maloy5-8/+19
When a link is taken down because of a node local event, such as disabling of a bearer or an interface, we currently leave it to the peer node to discover the broken communication. The default time for such failure discovery is 1.5-2 seconds. If we instead allow the terminating link endpoint to send out a RESET message at the moment it is reset, we can achieve the impression that both endpoints are going down instantly. Since this is a very common scenario, we find it worthwhile to make this small modification. Apart from letting the link produce the said message, we also have to ensure that the interface is able to transmit it before TIPC is detached. We do this by performing the disabling of a bearer in three steps: 1) Disable reception of TIPC packets from the interface in question. 2) Take down the links, while allowing them so send out a RESET message. 3) Disable transmission of TIPC packets on the interface. Apart from this, we now have to react on the NETDEV_GOING_DOWN event, instead of as currently the NEDEV_DOWN event, to ensure that such transmission is possible during the teardown phase. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-15tipc: delay ESTABLISH state event when link is establishedJon Paul Maloy3-23/+49
Link establishing, just like link teardown, is a non-atomic action, in the sense that discovering that conditions are right to establish a link, and the actual adding of the link to one of the node's send slots is done in two different lock contexts. The link FSM is designed to help bridging the gap between the two contexts in a safe manner. We have now discovered a weakness in the implementaton of this FSM. Because we directly let the link go from state LINK_ESTABLISHING to state LINK_ESTABLISHED already in the first lock context, we are unable to distinguish between a fully established link, i.e., a link that has been added to its slot, and a link that has not yet reached the second lock context. It may hence happen that a manual intervention, e.g., when disabling an interface, causes the function tipc_node_link_down() to try removing the link from the node slots, decrementing its active link counter etc, although the link was never added there in the first place. We solve this by delaying the actual state change until we reach the second lock context, inside the function tipc_node_link_up(). This makes it possible for potentail callers of __tipc_node_link_down() to know if they should proceed or not, and the problem is solved. Unforunately, the situation described above also has a second problem. Since there by necessity is a tipc_node_link_up() call pending once the node lock has been released, we must defuse that call by setting the link back from LINK_ESTABLISHING to LINK_RESET state. This forces us to make a slight modification to the link FSM, which will now look as follows. +------------------------------------+ |RESET_EVT | | | | +--------------+ | +-----------------| SYNCHING |-----------------+ | |FAILURE_EVT +--------------+ PEER_RESET_EVT| | | A | | | | | | | | | | | | | | |SYNCH_ |SYNCH_ | | | |BEGIN_EVT |END_EVT | | | | | | | V | V V | +-------------+ +--------------+ +------------+ | | RESETTING |<---------| ESTABLISHED |--------->| PEER_RESET | | +-------------+ FAILURE_ +--------------+ PEER_ +------------+ | | EVT | A RESET_EVT | | | | | | | | +----------------+ | | | RESET_EVT| |RESET_EVT | | | | | | | | | | |ESTABLISH_EVT | | | | +-------------+ | | | | | | RESET_EVT | | | | | | | | | | | V V V | | | | +-------------+ +--------------+ RESET_EVT| +--->| RESET |--------->| ESTABLISHING |<----------------+ +-------------+ PEER_ +--------------+ | A RESET_EVT | | | | | | | |FAILOVER_ |FAILOVER_ |FAILOVER_ |BEGIN_EVT |END_EVT |BEGIN_EVT | | | V | | +-------------+ | | FAILINGOVER |<----------------+ +-------------+ Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.