aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/spectrum.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-25mlxsw: spectrum_qdisc: Support offloading of TBF QdiscPetr Machata1-0/+2
React to the TC messages that were introduced in a preceding patch and configure egress maximum shaper as appropriate. TBF can be used as a root qdisc or under one of PRIO or strict ETS bands. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Configure shaper rate and burst size togetherPetr Machata1-1/+1
In order to allow configuration of burst size together with shaper rate, extend mlxsw_sp_port_ets_maxrate_set() with a burst_size argument. Convert call sites to pass 0 (for default). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25mlxsw: spectrum: Add lowest_shaper_bs to struct mlxsw_spPetr Machata1-0/+1
Lower limit of burst size configuration is dependent on system type. Add a datum to track the value. Initialize as appropriate in mlxsw_spX_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20spectrum: Add a delayed work to update SPAN buffsize according to speedJiri Pirko1-0/+3
When PUDE event is handled and the link is up, update the port SPAN buffer size according to the current speed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Fix SPAN egress mirroring buffer size for Spectrum-2Jiri Pirko1-0/+3
For SPAN egress mirroring buffer size, it is needed to use a different formula for Spectrum and Spectrum-2. Move the buffer size computation to ops and implement new formula for Spectrum-2. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20mlxsw: spectrum: Push code getting port speed into a helperJiri Pirko1-0/+1
Currently PTP code queries directly PTYS register for port speed from work scheduled upon PUDE event. Since the speed needs to be used for SPAN buffer size computation as well, push the code into a separate helper. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18mlxsw: spectrum_qdisc: Support offloading of ETS QdiscPetr Machata1-0/+2
Handle TC_SETUP_QDISC_ETS, add a new ops structure for the ETS Qdisc. Invoke the extended prio handlers implemented in the previous patch. For stats ops, invoke directly the prio callbacks, which are not sensitive to differences between PRIO and ETS. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use port_module_max_width to compute base port indexJiri Pirko1-2/+0
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Remember split base local port and use it in unsplitJiri Pirko1-0/+1
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Replace port_to_module array with array of structsJiri Pirko1-6/+12
Store the initial PMLP register configuration into array of structures instead of just simple array of module numbers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-18mlxsw: spectrum: Register switched port analyzers (SPAN) as resourceDanielle Ratson1-0/+3
The switch supports an enhanced switched port analyzer that enables selecting network traffic for analysis by a network analyzer. SPAN agents are configured and consumed whenever a tc filter is added with a mirror action to a new destination. The destination can either be a physical port (e.g., swp1), a VLAN device or a gretap. Expose the maximum number of SPAN agents and their current usage to the user. Signed-off-by: Danielle Ratson <danieller@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko1-1/+2
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum: Take devlink net instead of init_netJiri Pirko1-0/+6
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: spectrum_ptp: Add counters for GC eventsPetr Machata1-0/+11
On Spectrum-1, timestamped PTP packets and the corresponding timestamps need to be kept in caches until both are available, at which point they are matched up and packets forwarded as appropriate. However, not all packets will ever see their timestamp, and not all timestamps will ever see their packet. It is necessary to dispose of such abandoned entries, so a garbage collector was introduced in commit 5d23e4159772 ("mlxsw: spectrum: PTP: Garbage-collect unmatched entries"). If these GC events happen often, it is a sign of a problem. However because this whole mechanism is taking place behind the scenes, there is no direct way to determine whether garbage collection took place. Therefore to fix this, on Spectrum-1 only, expose four artificial ethtool counters for the GC events: GCd timestamps and packets, in TX and RX directions. Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-28mlxsw: spectrum: Prevent auto negotiation on number of lanesShalom Toledo1-3/+3
After 50G-1-lane and 100G-2-lanes link modes were introduced, the driver is facing situations in which the hardware auto negotiates not only on speed and type, but also on number of lanes. Prevent auto negotiation on number of lanes by allowing only port speeds that can be supported on a given port according to its width. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21mlxsw: spectrum: Add devlink-trap supportIdo Schimmel1-0/+13
Register supported packet traps (layer 2 drops only, currently) and associated trap group with devlink during driver initialization. The amount of traffic generated by these packet drop traps is capped at 10Kpps to ensure the CPU is not overwhelmed by incoming packets. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+4
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29mlxsw: spectrum_ptp: Increase parsing depth when PTP is enabledPetr Machata1-0/+4
Spectrum systems have a configurable limit on how far into the packet they parse. By default, the limit is 96 bytes. An IPv6 PTP packet is layered as Ethernet/IPv6/UDP (14+40+8 bytes), and sequence ID of a PTP event is only available 32 bytes into payload, for a total of 94 bytes. When an additional 802.1q header is present as well (such as when ptp4l is running on a VLAN port), the parsing limit is exceeded. Such packets are not recognized as PTP, and are not timestamped. Therefore generalize the current VXLAN-specific parsing depth setting to allow reference-counted requests from other modules as well. Keep it in the VXLAN module, because the MPRS register also configures UDP destination port number used for VXLAN, and is thus closely tied to the VXLAN code anyway. Then invoke the new interfaces from both VXLAN (in obvious places), as well as from PTP code, when the (global) timestamping configuration changes from disabled to enabled or vice versa. Fixes: 8748642751ed ("mlxsw: spectrum: PTP: Support SIOCGHWTSTAMP, SIOCSHWTSTAMP ioctls") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-27mlxsw: spectrum_acl: Track rules that forbid egress block bindJiri Pirko1-2/+5
Some matches and actions are not supported on egress. Track such rules and forbid a bind of block which contains them to egress. With this patch, the kernel tells the user he cannot do that: $ tc qdisc add dev ens16np1 ingress_block 22 clsact $ tc filter add block 22 protocol 802.1q pref 2 handle 101 flower vlan_id 100 skip_sw action pass $ tc qdisc add dev ens16np2 egress_block 22 clsact Error: mlxsw_spectrum: Block cannot be bound to egress because it contains unsupported rules. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-17mlxsw: spectrum: Do not process learned records with a dummy FIDIdo Schimmel1-0/+1
The switch periodically sends notifications about learned FDB entries. Among other things, the notification includes the FID (Filtering Identifier) and the port on which the MAC was learned. In case the driver does not have the FID defined on the relevant port, the following error will be periodically generated: mlxsw_spectrum2 0000:06:00.0 swp32: Failed to find a matching {Port, VID} following FDB notification This is not supposed to happen under normal conditions, but can happen if an ingress tc filter with a redirect action is installed on a bridged port. The redirect action will cause the packet's FID to be changed to the dummy FID and a learning notification will be emitted with this FID - which is not defined on the bridged port. Fix this by having the driver ignore learning notifications generated with the dummy FID and delete them from the device. Another option is to chain an ignore action after the redirect action which will cause the device to disable learning, but this means that we need to consume another action whenever a redirect action is used. In addition, the scenario described above is merely a corner case. Fixes: cedbb8b25948 ("mlxsw: spectrum_flower: Set dummy FID before forward action") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Alex Kushnarov <alexanderk@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Alex Kushnarov <alexanderk@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: flow_offload: rename tc_cls_flower_offload to flow_cls_offloadPablo Neira Ayuso1-5/+5
And any other existing fields in this structure that refer to tc. Specifically: * tc_cls_flower_offload_flow_rule() to flow_cls_offload_flow_rule(). * TC_CLSFLOWER_* to FLOW_CLS_*. * tc_cls_common_offload to tc_cls_common_offload. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Set up PTP shaper when port status has changedShalom Toledo1-0/+1
When getting port up down event (PUDE), change the PTP shaper configuration based on hardware time stamping on/off and the port's speed. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05mlxsw: spectrum: Add new operation for getting the port's speedShalom Toledo1-0/+1
New operation for getting the port's speed as part of port-type-speed operations. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01mlxsw: spectrum: PTP: Support timestamping on Spectrum-1Petr Machata1-0/+5
On Spectrum-1, timestamps arrive through a pair of dedicated events: MLXSW_TRAP_ID_PTP_ING_FIFO and _EGR_FIFO. The payload delivered with those traps is contents of the timestamp FIFO at a given port in a given direction. Add a Spectrum-1-specific handler for these two events which decodes the timestamps and forwards them to the PTP module. Add a function that parses a packet, dispatching to ptp_classify_raw(), and decodes PTP message type, domain number, and sequence ID. Add a new mlxsw dependency on the PTP classifier. Add helpers that can store and retrieve unmatched timestamps and SKBs to the hash table added in a preceding patch. Add the matching code itself: upon arrival of a timestamp or a packet, look up the corresponding unmatched entry, and match it up. If there is none, add a new unmatched entry. This logic is the same on ingress as on egress. Packets and timestamps that never matched need to be eventually disposed of. A garbage collector added in a follow-up patch will take care of that. Since currently all this code is turned off, no crud will accumulate in the hash table. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01mlxsw: spectrum: PTP: Add PTP initialization / finalizationPetr Machata1-0/+2
Add two ptp_ops: init and fini, to initialize and finalize the PTP subsystem. Call as appropriate from mlxsw_sp_init() and _fini(). Lay the groundwork for Spectrum-1 support. On Spectrum-1, the received timestamped packets and their corresponding timestamps arrive independently, and need to be matched up. Introduce the related data types and add to struct mlxsw_sp_ptp_state the hash table that will keep the unmatched entries. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01mlxsw: spectrum: PTP: Hook into packet receive pathPetr Machata1-0/+2
When configured, the Spectrum hardware can recognize PTP packets and trap them to the CPU using dedicated traps, PTP0 and PTP1. One reason to get PTP packets under dedicated traps is to have a separate policer suitable for the amount of PTP traffic expected when switch is operated as a boundary clock. For this, add two new trap groups, MLXSW_REG_HTGT_TRAP_GROUP_SP_PTP0 and _PTP1, and associate the two PTP traps with these two groups. In the driver, specifically for Spectrum-1, event PTP packets will need to be paired up with their timestamps. Those arrive through a different set of traps, added later in the patch set. To support this future use, introduce a new PTP op, ptp_receive. It is possible to configure which PTP messages should be trapped under which PTP trap. On Spectrum systems, we will use PTP0 for event packets (which need timestamping), and PTP1 for control packets (which do not). Thus configure PTP0 trap with a custom callback that defers to the ptp_receive op. Additionally, L2 PTP packets are actually trapped through the LLDP trap, not through any of the PTP traps. So treat the LLDP trap the same way as the PTP0 trap. Unlike PTP traps, which are currently still disabled, LLDP trap is active. Correspondingly, have all the implementations of the ptp_receive op return true, which the handler treats as a signal to forward the packet immediately. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01mlxsw: spectrum: Add support for traps specific to Spectrum-1Petr Machata1-0/+2
On Spectrum-1, timestamps for PTP packets are delivered through queues of ingress and egress timestamps. There are two event traps corresponding to activity on each of those queues. This mechanism is absent on Spectrum-2, and therefore the traps should only be registered on Spectrum-1. Carry a chip-specific listener array in mlxsw_sp->listeners and listeners_count. Register listeners from that array in mlxsw_sp_traps_init(). Add a new listener array for Spectrum-1 traps and configure the newly-added mlxsw_sp->listeners with this array. The listener array is empty for now, the events will be added in a later patch. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19mlxsw: spectrum_flower: Implement support for ingress device matchingJiri Pirko1-0/+9
Benefit from the previously extended flow_dissector infrastructure and offload matching on ingress port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-13mlxsw: spectrum: PTP physical hardware clock initializationShalom Toledo1-0/+3
Initialize the PTP physical hardware clock. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-22mlxsw: spectrum_buffers: Add extack messages for invalid configurationsIdo Schimmel1-3/+5
Add extack messages to better communicate invalid configuration to the user. Example: # devlink sb pool set pci/0000:01:00.0 pool 0 size 104857600 thtype dynamic Error: mlxsw_spectrum: Exceeded shared buffer size. devlink answers: Invalid argument Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27net: Remove switchdev_opsFlorian Fainelli1-2/+0
Now that we have converted all possible callers to using a switchdev notifier for attributes we do not have a need for implementing switchdev_ops anymore, and this can be removed from all drivers the net_device structure. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add Spectrum-2 ASIC port type-speed operationsShalom Toledo1-0/+1
Add Spectrum-2 ASIC port type-speed operations. Since multiple ethtool link modes are represented using a single bit in the ASIC, the driver forces the user to configure all types per a specific speed. For example, if the user wants to advertise 100Gbps 4-lanes speed, he should advertise all the types of 100Gbps 4-lanes speed that are supported by the ASIC as shown below: Supported ethtool bits for 100Gbps 4-lanes: 0x1000000000 100000baseKR4 Full 0x2000000000 100000baseSR4 Full 0x4000000000 100000baseCR4 Full 0x8000000000 100000baseLR4_ER4 Full Command for advertising 100Gbps 4-lanes: ethtool -s enp3s0np1 advertise 0xF000000000 Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-23mlxsw: spectrum: Add port type-speed operationsShalom Toledo1-1/+26
Add port type-speed operations in order to have different operations for different ASICs. For now, both ASICs use the same pointer. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum_buffers: Reject overlarge headroom size requestsPetr Machata1-0/+1
cap_max_headroom_size holds maximum headroom size supported. Overstepping that limit might under certain conditions lead to ASIC freeze. Query and store the value, and add mlxsw_sp_sb_max_headroom_cells() for obtaining the stored value. In __mlxsw_sp_port_headroom_set(), reject requests where the total port buffer is larger than the advertised maximum. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-21mlxsw: spectrum: Add struct mlxsw_sp_sb_valsPetr Machata1-0/+5
Spectrum-2 will be configured with a different shared buffer configuration than Spectrum-1. Therefore introduce a structure for keeping the chip-specific default and immutable configuration. Configuration mutable in runtime will still be kept in struct mlxsw_sp_sb. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum: add "acl_region_rehash_interval" devlink paramJiri Pirko1-0/+2
Expose new driver-specific "acl_region_rehash_interval" devlink param which would allow user to alter default ACL region rehash interval. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Pass hints priv all the way to ERP codeJiri Pirko1-1/+2
The hints priv comes from ERP code and it is possible to obtain it from TCAM code. Add arg to appropriate functions so the hints priv could be passed back down to ERP code. Pass NULL now as the follow-up patches would pass an actual hints priv pointer. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08mlxsw: spectrum_acl: Implement basic ERP rehash hits creationJiri Pirko1-0/+2
Introduce an initial implementation of rehash logic in ERP code. Currently, the rehash is considered as needed only in case number of roots in the hints is smaller than the number of roots actually in use. In that case return hints pointer and let it be obtained through the callpath through the Spectrum-2 TCAM op. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28mlxsw: spectrum_acl: Remove unnecessary arg on action_replace call pathJiri Pirko1-2/+1
No need to pass ruleset/group and chunk pointers on action_replace call path, nobody uses them. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-23mlxsw: spectrum: Expose functions to create and destroy underlay RIFIdo Schimmel1-0/+3
In Spectrum-2, instead of providing the ID of the virtual router (VR) where NVE underlay lookups will occur as in Spectrum-1, the ID of a router interface (RIF) in this VR is required. Expose functions to create and destroy such a RIF. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-20mlxsw: spectrum: Set RIF ops per ASIC typeNir Dotan1-0/+6
Set RIF ops array as member of mlxsw_sp in order to control which RIF operations callbacks are called per ASIC type. This is needed to control per ASIC handling of loopback RIF configurations. Signed-off-by: Nir Dotan <nird@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20mlxsw: spectrum: Switch to VID 4095 as default VIDIdo Schimmel1-1/+1
There is no need to abuse VID 1 anymore and we can instead use VID 4095 as the default VLAN, which will be configured on the port throughout its lifetime. The OVS join / leave functions are changed to enable VIDs 1-4094 (inclusive) instead of 2-4095. This because VID 4095 is now the default VLAN instead of 1. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20mlxsw: spectrum: Store pointer to default port VLAN in port structIdo Schimmel1-0/+1
Subsequent patches will need to access the default port VLAN. Since this VLAN will exist throughout the lifetime of the port, simply store it in the port's struct. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20mlxsw: spectrum: Replace hard-coded default VID with a defineIdo Schimmel1-0/+2
Subsequent patches are going to replace the current default VID (1) with VLAN_N_VID - 1 (4095). Prepare for this conversion by replacing the hard-coded '1' with a define. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20mlxsw: spectrum_router: Do not force specific configuration orderIdo Schimmel1-0/+4
In symmetric routing, the only two members in the VLAN corresponding to the L3 VNI are the router port and the VXLAN tunnel. In case the VXLAN device is already enslaved to the bridge and only later the VLAN interface is configured, the tunnel will not be offloaded. The reason for this is that when the router interface (RIF) corresponding to the VLAN interface is configured, it calls the core fid_get() API which does not check if NVE should be enabled on the FID. Instead, call into the bridge code which will check if NVE should be enabled on the FID. This effectively means that the same code path is used to retrieve a FID when either a local port or a router port joins the FID. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_router: Make RIF deletion more robustIdo Schimmel1-4/+0
In the past we had multiple instances where RIFs were not properly deleted. One of the reasons for leaking a RIF was that at the time when IP addresses were flushed from the respective netdev (prompting the destruction of the RIF), the netdev was no longer a mlxsw upper. This caused the inet{,6}addr notification blocks to ignore the NETDEV_DOWN event and leak the RIF. Instead of checking whether the netdev is our upper when an IP address is removed, we can instead check if the netdev has a RIF configured. To look up a RIF we need to access mlxsw private data, so the patch stores the notification blocks inside a mlxsw struct. This then allows us to use container_of() and extract the required private data. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum: Remove reference count from VLAN entriesIdo Schimmel1-3/+2
Commit b3529af6bb0d ("spectrum: Reference count VLAN entries") started reference counting port-VLAN entries in a similar fashion to the 8021q driver. However, this is not actually needed and only complicates things. Instead, the driver should forbid the creation of a VLAN on a port if this VLAN already exists. This would also solve the issue fixed by the mentioned commit. Therefore, remove the get()/put() API and use create()/destroy() instead. One place that needs special attention is VLAN addition in a VLAN-aware bridge via switchdev operations. In case the VLAN flags (e.g., 'pvid') are toggled, then the VLAN entry already exists. To prevent the driver from wrongly returning EEXIST, the driver is changed to check in the prepare phase whether the entry already exists and only returns an error in case it is not associated with the correct bridge port. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_fid: Remove unused functionIdo Schimmel1-1/+0
This function is no longer used. Remove it. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19mlxsw: spectrum_router: Do not destroy RIFs based on FID's reference countIdo Schimmel1-1/+1
Currently, when a RIF is constructed on top of a FID, the RIF increments the FID's reference count and the RIF is destroyed when the FID's reference count drops to 1. This effectively means that when no local ports are member in the FID, the FID is destroyed regardless if the router port is a member in the FID or not. The above can lead to the unexpected behavior in which routes using a VLAN interface as their nexthop device are no longer offloaded after the last local port leaves the corresponding VLAN (FID). Example: # ip -4 route show dev br0.10 192.0.2.0/24 proto kernel scope link src 192.0.2.1 offload # bridge vlan del vid 10 dev swp3 # ip -4 route show dev br0.10 192.0.2.0/24 proto kernel scope link src 192.0.2.1 After the patch, the route is offloaded before and after the VLAN is removed from local port 'swp3', as the RIF corresponding to 'br0.10' continues to exists. In order to remove RIFs' reliance on the underlying FID's reference count, we need to add a reference count to sub-port RIFs, which are RIFs that correspond to physical ports and their uppers (e.g., LAG devices). In this case, each {Port, VID} ('struct mlxsw_sp_port_vlan') needs to hold a reference on the RIF. For example: bond0.10 | bond0 | +-------+ | | swp1 swp2 Both {Port 1, VID 10} and {Port 2, VID 10} will hold a reference on the RIF corresponding to 'bond0.10'. When the last reference is dropped, the RIF will be destroyed. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-13mlxsw: spectrum: Add mlxsw_sp.mac_maskPetr Machata1-0/+1
The Spectrum hardware demands that all router interfaces in the system have the same first 38 resp. 36 bits of MAC address: the former limit holds on Spectrum, the latter on Spectrum-2. Add a field that refers to the required prefix mask and initialize in mlxsw_sp1_init() and mlxsw_sp2_init(). Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.