aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-08-24mlxsw: router: Enable neighbors to be created on stacked devicesYotam Gigi1-1/+1
Make the function mlxsw_router_neigh_construct search the rif according to the neighbour dev other than the dev that was passed to the ndo, thus allowing creating neigbhours upon stacked devices. Fixes: 6cf3c971dc84 ("mlxsw: spectrum_router: Add private neigh table") Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-14mlxsw: spectrum_router: Fix use after freeVincent1-1/+2
In mlxsw_sp_router_fib4_add_info_destroy(), the fib_entry pointer is used after it has been freed by mlxsw_sp_fib_entry_destroy(). Use a temporary variable to fix this. Fixes: 61c503f976b5449e ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> Cc: Jiri Pirko <jiri@mellanox.com> Acked-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14mlxsw: spectrum_router: Return -ENOENT in case of errorChristophe Jaillet1-1/+1
'vr' should be a valid pointer here, so returning 'PTR_ERR(vr)' is wrong. Return an explicit error code (-ENOENT) instead. Fixes: 61c503f976 ("mlxsw: spectrum_router: Implement fib4 add/del switchdev obj ops") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: Add the unresolved next-hops probesYotam Gigi1-1/+32
Now, the driver sends arp probes for all unresolved neighbours that are currently a nexthop for some route on the system. The job is set periodically every 5 seconds. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add the nexthop neigh activity updateYotam Gigi1-15/+60
For nexthop neighbours we need to make kernel to think there is a traffic flowing to them preventing it from going to stale state. Otherwise kernel would stale it and eventually the neigh would be removed from HW and nexthop as well. That would reduce ECMP group in HW. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Implement next-hop routingJiri Pirko1-2/+491
Implement next-hop routing offload including ECMP. To make it possible, introduce next-hop group entity. This entity keeps track of resolved neighbours and updates HW adjacency table accordingly. Note that HW next-hops are stored in this adjacency table, in form of MAC. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Offload neighbours based on NUD state changeYotam Gigi1-0/+103
Listen to any NEIGH_UPDATE events sent and program the device accordingly. If NUD state is VALID and neighbour isn't yet offloaded, then program it into the device's table. Otherwise, just edit its parameters. If NUD state machine transitioned neighbour out of VALID state and it's present in the device's table, then remove it. Note that the device is programmed in delayed work, as the netevent notification chain is atomic and prevents us from going to sleep. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Periodically update the kernel's neigh tableYotam Gigi1-2/+190
As previously explained, the driver should periodically poll the device for neighbours activity according to the configured DELAY_PROBE_TIME. This will prevent active neighbours from staying in STALE state for long periods of time. During init configure the polling interval according to the DELAY_PROBE_TIME used in the default table. In addition, register a netevent notification block, so that the interval is updated whenever DELAY_PROBE_TIME changes. Using the computed interval schedule a delayed work, which will update the kernel via neigh_event_send() on any active neighbour since the last delayed work. Signed-off-by: Yotam Gigi <yotamg@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-05mlxsw: spectrum_router: Add private neigh tableJiri Pirko1-1/+145
We need to hold some private data for every neigh entry. It would be possible to do it using neigh_priv_len/ndo_neigh_construct/ ndo_neigh_destroy however only for the port device itself. That would not work for stacked devices like bridge/team/bond. So introduce a private neigh table. Hook onto ndos neigh_construct/destroy and add/remove table entry according to that. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement fib4 add/del switchdev obj opsJiri Pirko1-0/+245
Implement ipv4 FIB entries addition and removal. Initially, we support local and broadcast routes using "ip2me" trap action. Also, unicast routes without nexthop are supported using "local" action. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Add virtual router managementJiri Pirko1-0/+228
Virtual router is a construct used inside HW. In this implementation we map kernel tables to virtual routers one to one. Introduce management logic to create virtual routers when needed and destroy in case they are no longer in use. According to that, call into LPM tree management. Each virtual router is always bound to one LPM tree. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement LPM trees managementJiri Pirko1-1/+154
Introduce basic LPM tree management allowing to share the trees in between tables if the used prefixes in the tables are the same. Build the tree structure according to the used prefixes. Although it is not optimal for many use cases, this initial implementation does only simple linear left-tree. More advanced structures will be introduced later on, possibly including mechanisms to change trees on the fly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-04mlxsw: spectrum_router: Implement private fibJiri Pirko1-0/+120
Shadow FIB is needed in order to hold additional information for FIB entries and keep track of used prefixes. That is needed for the LPM tree construction to be introduced later on in this set. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-02mlxsw: spectrum_router: Add basic ipv4 router initializationIdo Schimmel1-0/+68
Create a skeleton router file and do basic HW initialization of router. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.