aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/mellanox/mlxsw (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-24mlxsw: spectrum_router: Fix use of uninitialized adjacency indexAmit Cohen1-3/+2
When mlxsw_sp_adj_discard_write() is called for the first time, the value stored in 'mlxsw_sp->router->adj_discard_index' is invalid, as indicated by 'mlxsw_sp->router->adj_discard_index_valid' being set to 'false'. In this case, we should not use the value initially stored in 'mlxsw_sp->router->adj_discard_index' (0) and instead use the value allocated later in the function. Fixes: 983db6198f0d ("mlxsw: spectrum_router: Allocate discard adjacency entry when needed") Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24mlxsw: spectrum_router: After underlay moves, demote conflicting tunnelsPetr Machata1-1/+38
When a GRE tunnel is bound to an underlay netdevice and that netdevice is moved to a different VRF, that could cause two tunnels to have the same underlay local address in the same VRF. Linux in this situation dispatches the traffic according to the tunnel key (or lack thereof), but that cannot be offloaded to Spectrum devices. Detect this situation and unoffload the two impacted tunnels when it happens. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-18/+1
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-18mlxsw: spectrum_router: Fix determining underlay for a GRE tunnelPetr Machata1-18/+1
The helper mlxsw_sp_ipip_dev_ul_tb_id() determines the underlay VRF of a GRE tunnel. For a tunnel without a bound device, it uses the same VRF that the tunnel is in. However in Linux, a GRE tunnel without a bound device uses the main VRF as the underlay. Fix the function accordingly. mlxsw further assumed that moving a tunnel to a different VRF could cause conflict in local tunnel endpoint address, which cannot be offloaded. However, the only way that an underlay could be changed by moving the tunnel device itself is if the tunnel device does not have a bound device. But in that case the underlay is always the main VRF, so there is no opportunity to introduce a conflict by moving such device. Thus this check constitutes a dead code, and can be removed, which do. Fixes: 6ddb7426a7d4 ("mlxsw: spectrum_router: Introduce loopback RIFs") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-15mlxsw: spectrum_router: Allocate discard adjacency entry when neededIdo Schimmel1-11/+32
Commit 0c3cbbf96def ("mlxsw: Add specific trap for packets routed via invalid nexthops") allocated an adjacency entry during driver initialization whose purpose is to discard packets hitting the route pointing to it. These adjacency entries are allocated from a resource called KVD linear (KVDL). There are situations in which the user can decide to set the size of this resource (via devlink-resource) to 0, in which case the driver will not be able to load. Therefore, instead of pre-allocating this adjacency entry, simply allocate it only when needed. A variable indicating the validity of the entry is added and is used to ensure it is only allocated and written once and that it is freed after all the routes were flushed. Fixes: 0c3cbbf96def ("mlxsw: Add specific trap for packets routed via invalid nexthops") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: spectrum: Enable EMAD string TLVShalom Toledo1-0/+2
Make sure to enable EMAD string TLV only after using the required firmware version. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add support for using EMAD string TLVShalom Toledo2-6/+72
In case the firmware had an error while processing EMADs, it can send back an ASCII string with the reason using EMAD string TLV. This patch adds the support for using EMAD string TLV. In case of an error, reports the reason using devlink hwerr tracepoint. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Extend EMAD information reported to devlink hwerrShalom Toledo1-2/+10
Extend EMAD information reported to devlink hwerr tracepoint with transaction id and reg id (both, hex and string). Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add support for EMAD string TLV parsingShalom Toledo1-0/+15
During parsing of incoming EMADs, fill the string TLV's offset when it is used. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Add EMAD string TLVShalom Toledo2-1/+24
Add EMAD string TLV, an ASCII string the driver can receive from the firmware in case of an error. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: emad: Remove deprecated EMAD TLVsShalom Toledo1-4/+1
Remove deprecated EMAD TLVs. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12mlxsw: core: Parse TLVs' offsets of incoming EMADsShalom Toledo1-11/+42
Until now the code assumes a fixed structure which makes it difficult to support EMADs with and without new TLVs. Make it more generic by parsing the TLVs when the EMADs are received and store the offset to the different TLVs in the control block. Using these offsets to extract information from the EMADs without relying on a specific structure. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11mlxsw: core: Enable devlink reload only on probeJiri Pirko1-2/+3
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by: Shalom Toledo <shalomt@mellanox.com> Fixes: a0c76345e3d3 ("devlink: disallow reload operation during device cleanup") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11mlxsw: core: Enable devlink reload only on probeJiri Pirko1-2/+3
Call devlink enable only during probe time and avoid deadlock during reload. Reported-by: Shalom Toledo <shalomt@mellanox.com> Fixes: 5a508a254bed ("devlink: disallow reload operation during device cleanup") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Tested-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09devlink: disallow reload operation during device cleanupJiri Pirko1-1/+5
There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind devlink dev reload pci/0000:00:10.0 & echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08devlink: disallow reload operation during device cleanupJiri Pirko1-1/+5
There is a race between driver code that does setup/cleanup of device and devlink reload operation that in some drivers works with the same code. Use after free could we easily obtained by running: while true; do echo 10 > /sys/bus/netdevsim/new_device devlink dev reload netdevsim/netdevsim10 & echo 10 > /sys/bus/netdevsim/del_device done Fix this by enabling reload only after setup of device is complete and disabling it at the beginning of the cleanup process. Reported-by: Ido Schimmel <idosch@mellanox.com> Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07mlxsw: Add layer 3 devlink-trap exceptions supportAmit Cohen3-8/+65
Add the trap IDs used to report layer 3 exceptions. Trapped packets are first reported to devlink and then injected to the kernel's receive path. All the packets have 'offload_fwd_mark' set in order to prevent them from potentially being forwarded by the bridge again. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07mlxsw: Add specific trap for packets routed via invalid nexthopsAmit Cohen3-0/+39
Currently, mlxsw does not differentiate between these two cases of routes with invalid nexthops: 1. Nexthops whose nexthop device is a mlxsw upper (has a RIF), but whose neighbour could not be resolved 2. Nexthops whose nexthop device is not a mlxsw upper (e.g., management interface) Up until now this did not matter and mlxsw trapped packets for both cases using the same trap ID. However, packets that should have been routed in hardware (case 1), but incurred a problem are considered exceptions and should be reported to the user. The two cases should therefore be split between two different trap IDs. Allocate a new adjacency entry during initialization and upon the insertion of the first route with an invalid mlxsw nexthop, program this entry to discard packets. Packets hitting this entry will be reported using new trap ID - "DISCARD_ROUTER3". In the future, the entry could be written during initialization, but currently firmware requires a valid RIF, which is not available at this stage. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07mlxsw: Add new FIB entry type for reject routesAmit Cohen3-2/+25
Currently, packets that cannot be routed in hardware (e.g., nexthop device is not upper of mlxsw), are trapped to the kernel for forwarding. Such packets are trapped using "RTR_INGRESS0" trap. This trap also traps packets that hit reject routes (e.g., "unreachable") so that the kernel will generate the appropriate ICMP error message for them. Subsequent patch will need to only report to devlink packets that hit a reject route, which is impossible as long as "RTR_INGRESS0" is overloaded like that. Solve this by using "RTR_INGRESS1" trap for packets that hit reject routes. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07mlxsw: Add layer 3 devlink-trap supportAmit Cohen3-0/+49
Add the trap IDs and trap group used to report layer 3 drops. Register layer 3 packet traps and associated layer 3 trap group with devlink during driver initialization. Signed-off-by: Amit Cohen <amitc@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-07mlxsw: spectrum: Fix error return code in mlxsw_sp_port_module_info_init()Wei Yongjun1-1/+3
Fix to return negative error code -ENOMEM from the error handling case instead of 0, as done elsewhere in this function. Fixes: 4a7f970f1240 ("mlxsw: spectrum: Replace port_to_module array with array of structs") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-2/+2
The only slightly tricky merge conflict was the netdevsim because the mutex locking fix overlapped a lot of driver reload reorganization. The rest were (relatively) trivial in nature. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: Fix 64-bit division in mlxsw_sp_sb_prs_initNathan Chancellor1-1/+1
When building for 32-bit ARM, there is a link time error because of a 64-bit division: ld.lld: error: undefined symbol: __aeabi_uldivmod >>> referenced by spectrum_buffers.c >>> net/ethernet/mellanox/mlxsw/spectrum_buffers.o:(mlxsw_sp_buffers_init) in archive drivers/built-in.a >>> did you mean: __aeabi_uidivmod >>> defined in: arch/arm/lib/lib.a(lib1funcs.o Avoid this by using div_u64, which is designed to avoid this problem. Fixes: bc9f6e94bcb5 ("mlxsw: spectrum_buffers: Calculate the size of the main pool") Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Generalize split count checkJiri Pirko1-3/+3
Make the check generic for any possible value, not only 2 and 4. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Iterate over all ports in gap during unsplit createJiri Pirko1-13/+8
During recreation of original unsplit ports, just simply iterate over the whole gap and recreate whatever originally existed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Fix base port get for split count 4 and 8Jiri Pirko1-13/+15
The current code considers only split by 2 or 4. Make the base port getting generic and allow split by 8 to be handled correctly. Generalize the used port checks as well. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use port_module_max_width to compute base port indexJiri Pirko1-2/+0
Instead of using constant value, use port_module_max_width which is aligned with the cluster size. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Remember split base local port and use it in unsplitJiri Pirko2-9/+8
Don't compute the original base local port during unsplit, rather remember it in mlxsw_sp_port structure during split port creation. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Introduce resource for getting offset of 4 lanes split portJiri Pirko2-0/+4
In Spectrum-3 the modules have 8 lanes, so split by count 2 results in two split ports each of 4 lanes. Add a resource that can be used to obtain local port offset in that case. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Push getting offsets of split ports into a helperJiri Pirko1-23/+35
Get local port offsets of split port in a separate helper function and use it in both split and unsplit function. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Add sanity checks into module info getJiri Pirko1-2/+37
Driver assumes certain values in the PMLP register. Add checks that verify that PMLP register provides fitting values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Pass mapping values in port mapping structureJiri Pirko1-30/+26
Pass the port mapping structure down to create, module_map and other function instead of individual values. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use mapping of port being split for creating split portsJiri Pirko1-10/+13
Don't use constant max width value and instead of that, use the actual width of the port. Also don't pass module value and use the value stored in the same structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Replace port_to_module array with array of structsJiri Pirko2-39/+84
Store the initial PMLP register configuration into array of structures instead of just simple array of module numbers. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Distinguish between unsplittable and split portJiri Pirko1-4/+11
Currently when user does split, he is not able to distinguish if the port cannot be split because it is already split, or because it cannot be split at all. Add another check for split flag to distinguish this. Also add check forbidding split when maximal width is 1. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Move max_width check up before count checkJiri Pirko1-6/+6
The fact that the port cannot be split further should be checked before checking the count, so move it. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: spectrum: Use PMTM register to get max module widthJiri Pirko4-19/+67
Currently the max module width is hard-coded according to ASIC type. That is not entirely correct, as the max module width might differ per-board. Use PMTM register to query FW for maximal width of a module. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Add Port Module Type Mapping RegisterJiri Pirko1-0/+50
The PMTM allows query or configuration of module types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-31mlxsw: reg: Extend PMLP tx/rx lane value size to 4 bitsJiri Pirko1-2/+3
The tx/rx lane fields got extended to 4 bits, update the reg field description accordingly. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Shalom Toledo <shalomt@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: Enforce firmware version for Spectrum-2Ido Schimmel1-0/+18
In a similar fashion to Spectrum-1, enforce a specific firmware version for Spectrum-2 so that the driver and firmware are always in sync with regards to new features. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: Bump firmware version to 13.2000.2308Ido Schimmel1-1/+1
The version adds support for querying port module type. It will be used by a followup patch set from Jiri to make port split code more generic. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: pci: Increase PCI reset timeout for SN3800 systemsIdo Schimmel1-1/+1
SN3800 Spectrum-2 based systems have gearboxes that need to be initialized by the firmware during its initialization flow. In certain cases, the firmware might need to flash these gearboxes, which is currently a time-consuming process. In newer firmware versions, the firmware will not signal to the driver that it is ready until the gearboxes are flashed. Increase the PCI reset timeout for these situations. In normal cases, the driver will need to wait no longer than 5 seconds. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: reg: Increase size of MPAR registerIdo Schimmel1-1/+1
In new firmware versions this register is extended with a sampling rate for Spectrum-2 and future ASICs. Increase the size of the register to ensure the field is initialized to 0 which means every packet is mirrored. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-30mlxsw: core: Unpublish devlink parameters during reloadJiri Pirko1-2/+2
The devlink parameter "acl_region_rehash_interval" is a runtime parameter whose value is stored in a dynamically allocated memory. While reloading the driver, this memory is freed and then allocated again. A use-after-free might happen if during this time frame someone tries to retrieve its value. Since commit 070c63f20f6c ("net: devlink: allow to change namespaces during reload") the use-after-free can be reliably triggered when reloading the driver into a namespace, as after freeing the memory (via reload_down() callback) all the parameters are notified. Fix this by unpublishing and then re-publishing the parameters during reload. Fixes: 98bbf70c1c41 ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param") Fixes: 7c62cfb8c574 ("devlink: publish params only after driver init is done") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-28mlxsw: spectrum_buffers: remove unneeded semicolonYueHaibing1-2/+2
Remove excess semicolon after closing parenthesis. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum_buffers: Calculate the size of the main poolPetr Machata1-12/+34
Instead of hard-coding the size of the largest pool, calculate it from the reported guaranteed shared buffer size and sizes of other pools (currently only the CPU port pool). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-23mlxsw: spectrum: Use guaranteed buffer size as pool size limitPetr Machata3-10/+12
There are two resources associated with shared buffer size: cap_total_buffer_size, and cap_guaranteed_shared_buffer. So far, mlxsw has been using the former as a limit to determine how large a pool size is allowed to be. However, the total size also includes headrooms and reserved space, which really cannot be used for shared buffer pools. Therefore convert mlxsw to use the latter resource as a limit. Adjust hard-coded pool sizes to be the guaranteed size minus 256000 bytes for CPU port pool. On Spectrum-1 that actually leads to an increase. A follow-up patch will have this size calculated automatically. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-22mlxsw: core: Extend QSFP EEPROM size for ethtoolVadim Pasternak1-6/+17
Extend the size of QSFP EEPROM for the cable types SSF8436 and SFF8636 from 256 to 640 bytes in order to expose all the EEPROM pages by ethtool. For SFF-8636 and SFF-8436 specifications, the driver exposes 256 bytes of data for ethtool's get_module_eeprom() callback. This is because the driver uses the below defines to specify SFF module length in ethtool's get_module_info() callback: 'ETH_MODULE_SFF_8636_LEN' and 'ETH_MODULE_SFF_8436_LEN' (both are 256). As a result of exposing 256 bytes only, ethtool shows wrong "zero" info for pages 1, 2, 3. The patch changes the length returned by callback for get_module_info() to the values from the next defines: 'ETH_MODULE_SFF_8636_MAX_LEN' and 'ETH_MODULE_SFF_8436_MAX_LEN' (both are 640) to allow exposing of upper page 1, 2 and 3. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-22mlxsw: reg: Add macro for getting QSFP module EEPROM page numberVadim Pasternak1-0/+9
Provide a macro for getting QSFP module EEPROM page number from the optional upper page number row offset, specified in request. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-0/+1
Several cases of overlapping changes which were for the most part trivially resolvable. Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.