Age | Commit message (Collapse) | Author | Files | Lines |
|
Add ioctl support to IPoIB device driver. For now, this
ioctl will support timestamp get and set.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Enable PTP for IPoIB rdma_netdev and add the ability
to get the time stamping parameters using ethtool.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Eitan Rabin <rabin@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add misses counters (bytes, packet, gso, xmit_more) in TX flow for ipoib
traffic.
Fixes: 58545449b7b ("net/mlx5e: IPoIB, Xmit flow")
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add the ndo that supports change mtu for IPoIB.
The callback called from the ipoib ULP driver, that gives the ability to
change the SW and HW resources accordingly in the lower driver.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The mtu extra space that kept for the HW is specific for each link type,
and it is different in mlx5e and mlx5i modules.
Now it is kept in the priv structures, set by the mlx5e/mlx5i driver
accordingly.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add function that sets the default values for ipoib, setting/clearing
abilities that IPoIB doesn't support, like RQ size in this case.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Updating the carrier involves specific HW setting, each profile should
use its own function for that.
Both IPoIB and VF representor don't need carrier update function, since
VF representor has only a logical link to VF and IPoIB manages its own
link via ib_core upper layer.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add support for the following:
"ethtool -S" (statistics).
"ethtool -i" (driver info).
"ethtool -g/G" (rings parameters).
"ethtool -l/L" (channels parameters).
"ethtool -c/C" (coalesce options).
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Port flow control supported only for ethernet ports,
therefore, prevent any call if the port type differs from
MLX5_CAP_PORT_TYPE_ETH.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
IPoIB netdevice driver was only introduced in previous kernel release
and it is growing in terms of features and LOC, move it to a separate
directory.
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Saeed Mahameed says:
====================
Mellanox mlx5 updates and cleanups 2017-06-16
mlx5-updates-2017-06-16
This series provide some updates and cleanups for mlx5 core and netdevice
driver.
From Eli Cohen, add a missing event string.
From Or Gerlitz, some checkpatch cleanups.
From Moni, Disalbe HW level LAG when SRIOV is enabled.
From Tariq, A code reuse cleanup in aRFS flow.
From Itay Aveksis, Typo fix.
From Gal Pressman, ethtool statistics updates and "update stats" deferred work optimizations.
From Majd Dibbiny, Fast unload support on kernel shutdown.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to mlx5e to report bpf_prog ID during XDP_QUERY_PROG.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support to mlx4 to report bpf_prog ID during XDP_QUERY_PROG.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Acked-by: Alexei Starovoitov <ast@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
@@
expression SKB, LEN;
identifier fn = { skb_push, __skb_push, skb_push_rcsum };
@@
- fn(SKB, LEN)[0]
+ *(u8 *)fn(SKB, LEN)
Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.
Make these functions (skb_put, __skb_put and pskb_put) return void *
and remove all the casts across the tree, adding a (u8 *) cast only
where the unsigned char pointer was used directly, all done with the
following spatch:
@@
expression SKB, LEN;
typedef u8;
identifier fn = { skb_put, __skb_put };
@@
- *(fn(SKB, LEN))
+ *(u8 *)fn(SKB, LEN)
@@
expression E, SKB, LEN;
identifier fn = { skb_put, __skb_put };
type T;
@@
- E = ((T *)(fn(SKB, LEN)))
+ E = fn(SKB, LEN)
which actually doesn't cover pskb_put since there are only three
users overall.
A handful of stragglers were converted manually, notably a macro in
drivers/isdn/i4l/isdn_bsdcomp.c and, oddly enough, one of the many
instances in net/bluetooth/hci_sock.c. In the former file, I also
had to fix one whitespace problem spatch introduced.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There were many places that my previous spatch didn't find,
as pointed out by yuan linyu in various patches.
The following spatch found many more and also removes the
now unnecessary casts:
@@
identifier p, p2;
expression len;
expression skb;
type t, t2;
@@
(
-p = skb_put(skb, len);
+p = skb_put_zero(skb, len);
|
-p = (t)skb_put(skb, len);
+p = skb_put_zero(skb, len);
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, len);
|
-memset(p, 0, len);
)
@@
type t, t2;
identifier p, p2;
expression skb;
@@
t *p;
...
(
-p = skb_put(skb, sizeof(t));
+p = skb_put_zero(skb, sizeof(t));
|
-p = (t *)skb_put(skb, sizeof(t));
+p = skb_put_zero(skb, sizeof(t));
)
... when != p
(
p2 = (t2)p;
-memset(p2, 0, sizeof(*p));
|
-memset(p, 0, sizeof(*p));
)
@@
expression skb, len;
@@
-memset(skb_put(skb, len), 0, len);
+skb_put_zero(skb, len);
Apply it to the tree (with one manual fixup to keep the
comment in vxlan.c, which spatch removed.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some code re-ordering, functionally equivalent.
- The !tx_info->inl check is evaluated anyway in both flows
(common case/end case). Run it first, this might finish
the flows earlier.
- dma_unmap calls are identical in both flows, get it out
of the if block into the common area.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Gain is too small to be measurable, no degradation sensed.
Results are similar for IPv4 and IPv6.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Define LOG_TXBB_SIZE, log of TXBB_SIZE, and use it with a shift
operation instead of a multiplication with TXBB_SIZE.
Operations are equivalent as TXBB_SIZE is a power of two.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Gain is too small to be measurable, no degradation sensed.
Results are similar for IPv4 and IPv6.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Increase the default TX ring size (from 512 to 1024) to match
the RX ring size.
This gives the XDP TX ring a better chance to keep up with the
rate of its RX ring in case of a high load of XDP_TX actions.
Tested:
Ethtool counter rx_xdp_tx_full used to increase, after applying this
patch it stopped.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Instead of having their own NAPIs, XDP TX completion queues get
polled within the corresponding RX NAPI.
This prevents any possible race on TX ring prod/cons indices,
between the context that issues the transmits (RX NAPI) and the
context that handles the completions (was previously done in
a separate NAPI).
This also improves performance, as it decreases the number
of NAPIs running on a CPU, saving the overhead of syncing
and switching between the contexts.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Single queue no-RSS optimization ON.
XDP_TX packet rate:
-------------------------------------
| Before | After | Gain |
IPv4 | 12.0 Mpps | 13.8 Mpps | 15% |
IPv6 | 12.0 Mpps | 13.8 Mpps | 15% |
-------------------------------------
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several performance improvements in XDP TX datapath,
including:
- Ring a single doorbell for XDP TX ring per NAPI budget,
instead of doing it per a lower threshold (was 8).
This includes removing the flow of immediate doorbell ringing
in case of a full TX ring.
- Compiler branch predictor hints.
- Calculate values in compile time rather than in runtime.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Single queue no-RSS optimization ON.
XDP_TX packet rate:
-------------------------------------
| Before | After | Gain |
IPv4 | 10.3 Mpps | 12.0 Mpps | 17% |
IPv6 | 10.3 Mpps | 12.0 Mpps | 17% |
-------------------------------------
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several small code and performance improvements in stack TX datapath,
including:
- Compiler branch predictor hints.
- Minimize variables scope.
- Move tx_info non-inline flow handling to a separate function.
- Calculate data_offset in compile time rather than in runtime
(for !lso_header_size branch).
- Avoid trinary-operator ("?") when value can be preset in a matching
branch.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Gain is too small to be measurable, no degradation sensed.
Results are similar for IPv4 and IPv6.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several small performance improvements in TX CQ polling,
including:
- Compiler branch predictor hints.
- Minimize variables scope.
- More proper check of cq type.
- Use boolean instead of int for a binary indication.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Packet-rate tests for both regular stack and XDP use cases:
No noticeable gain, no degradation.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several small performance improvements in RX datapath,
including:
- Compiler branch predictor hints.
- Replace a multiplication with a shift operation.
- Minimize variables scope.
- Write-prefetch for packet header.
- Avoid trinary-operator ("?") when value can be preset in a matching
branch.
- Save a branch by updating RX ring doorbell within
mlx4_en_refill_rx_buffers(), which now returns void.
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
Single queue no-RSS optimization ON
(enable by ethtool -L <interface> rx 1).
XDP_DROP packet rate:
Same (28.1 Mpps), lower CPU utilization (from ~100% to ~92%).
Drop packets in TC:
-------------------------------------
| Before | After | Gain |
IPv4 | 4.14 Mpps | 4.18 Mpps | 1% |
-------------------------------------
XDP_TX packet rate:
-------------------------------------
| Before | After | Gain |
IPv4 | 10.1 Mpps | 10.3 Mpps | 2% |
IPv6 | 10.1 Mpps | 10.3 Mpps | 2% |
-------------------------------------
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid touching RX QP RSS context when loading with only
one RX ring, to allow optimized A0 RX steering.
Enable by:
- loading mlx4_core with module param: log_num_mgm_entry_size = -6.
- then: ethtool -L <interface> rx 1
Performance tests:
Tested on ConnectX3Pro, Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz
XDP_DROP packet rate:
-------------------------------------
| Before | After | Gain |
IPv4 | 20.5 Mpps | 28.1 Mpps | 37% |
IPv6 | 18.4 Mpps | 28.1 Mpps | 53% |
-------------------------------------
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove owner argument, as it is obsolete and unused.
This also saves the overhead of calculating its value in data-path.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Adding a support to flush all HW resources with one FW command and
skip all the heavy unload flows of the driver on kernel shutdown.
There's no need to free all the SW context since a new fresh kernel
will be loaded afterwards.
Regarding the FW resources, they should be closed, otherwise we will
have leakage in the FW. To accelerate this flow, we execute one command
in the beginning that tells the FW that the driver isn't going to close
any of the FW resources and asks the FW to clean up everything.
Once the commands complete, it's safe to close the PCI resources and
finish the routine.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add a new interface for commands execution that allows the
caller to wait for the command's completion in a busy-wait
loop (polling mode).
This is useful if we want to execute a command in a polling mode
while the driver is working in events mode for the rest of
the commands.
This interface will be used in the downstream patches.
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Unlike ethtool stats, get_stats ndo provides information cached by
update stats work that is running in the background without updating
them explicitly.
We cannot update all counters inside the ndo because some
updates require firmware commands that cannot be performed under a
spinlock.
update_stats work does not need to update ALL counters, since only
some of them are needed by ndo_get_stats.
This patch will allow for a minimal run of update_stats using an extra
parameter which will update necessary counters only and cut 13
firmware commands in each iteration of the work.
Work duration previous to this patch: ~4200us.
Work duration after this patch: ~700us (17% of the original time).
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
|
|
Move "query queue counter out of buffer" helper function out of
qp.c to en_main.c, since mlx5e netdev driver is the only one to use it.
Also allocate the output buffer on the stack instead of the heap, to reduce
number of heap allocs on update_stats work.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
|
|
Allocating buffers on the heap every 200ms is something we should avoid,
let's use buffers located on the stack instead.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
|
|
Rename rx_symbol_errors_phy to rx_pcs_symbol_err_phy, in order to
prevent confusion with rx_symbol_err_phy counter.
rx_pcs_symbol_err_phy counter counts the number of symbol errors that
were detected on the PCS (regardless of traffic) and weren't
corrected by FEC correction algorithm or that FEC algorithm was
not active on this interface.
rx_symbol_err_phy refers to errors on packet level (physical error
during a packet receive).
Fixes: 5db0a4f64c04 ("net/mlx5e: Expose physical layer statistical...")
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cc: kernel-team@fb.com
|
|
Signed-off-by: Itay Aveksis <itayav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
For a better code reuse and readability, use the existing
function arfs_get_tt() to map arfs_type into mlx5e_traffic_types,
instead of duplicating the switch-case logic.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
LAG cannot work if virtual functions are present. Therefore, if LAG is
configured, the attempt to create virtual functions will fail. This gives
precedence to LAG over SRIOV which is not the desired behavior as users
might want to use the bonding/teaming driver also want to work with SRIOV.
In that case we don't want to force an order of actions, first create
virtual functions and only than configure a bonding/teaming net device.
To fix, if LAG is configured during a request to create virtual
functions, remove it and continue.
We ignore ENODEV when trying to forbid lag. This makes sense
because "No such device" means that lag is forbidden anyway.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fix checkpatch complaints on that:
CHECK: No space is necessary after a cast
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fixed checkpatch complaints of the form:
CHECK: Alignment should match open parenthesis
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fixed checkpatch complaints on that:
CHECK: Blank lines aren't necessary before a close brace '}'
CHECK: Blank lines aren't necessary after an open brace '{'
and one on missing blank line..
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fixed bunch of this checkpatch complaint:
CHECK: Please don't use multiple blank lines
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Fixed few places where endianness was misspelled and
one spot whwere output was:
CHECK: 'endianess' may be misspelled - perhaps 'endianness'?
CHECK: 'ouput' may be misspelled - perhaps 'output'?
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Add missing NIC_VPORT_CHANGE event.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The conflicts were two cases of overlapping changes in
batman-adv and the qed driver.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If we hit this error path we end up returning ERR_PTR(0) which is NULL.
The caller is not expecting that so it results in a NULL dereference.
Fixes: 410ed13cae39 ("Add the mlxfw module for Mellanox firmware flash process")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Yotam Gigi <yotamg@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for access cable info via ethtool.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MCIA register is used to access the SFP+ and QSFP connector's
EPROM. It will be used to query the cable info.
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Saeed Mahameed says:
====================
mlx5-updates-2017-06-11
This series provides updates to mlx5 header rewrite feature, from Or Gerlitz.
and three more small updates From maor and eran.
-------
Or says:
Packets belonging to flows which are different by matching may still need
to go through the same header re-writes (e.g set the current routing hop
MACs and issue TTL decrement). To minimize the number of modify header
IDs, we add a cache for header re-write IDs which is keyed by the binary
chain of modify header actions.
The caching is supported for both eswitch and NIC use-cases, where the
actual conversion of the code to use caching comes in separate patches,
one per use-case.
Using a per field mask field, the TC pedit action supports modifying
partial fields. The last patch enables offloading that.
-------
From Maor, update flow table commands layout to the latest HW spec.
From Eran, ethtool connector type reporting updates.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When the page size isn't bigger than 4K, there is no added value of enabling 4K
UAR feature in the Firmware.
Modified the condition of enabling the 4K UAR accordingly.
Fixes: f502d834950a ("net/mlx5: Activate support for 4K UARs")
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for
changing the channel interrupt moderation values in order to reduce CPU
overhead for all traffic types.
Each iteration of the algorithm, DIM calculates the difference in
throughput, packet rate and interrupt rate from last iteration in order
to make a decision. DIM relies on counters for each metric. When these
counters get to their type's max value they wraparound. In this case
the delta between 'end' and 'start' samples is negative and when
translated to unsigned integers - very high. This results in a false
indication to the algorithm and might result in a wrong decision.
The fix calculates the 'distance' between 'end' and 'start' samples in a
cyclic way around the relevant type's max value. It can also be viewed as
an absolute value around the type's max value instead of around 0.
Testing show higher stability in DIM profile selection and no wraparound
issues.
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
DIM (Dynamically-tuned Interrupt Moderation) is a mechanism designed for
changing the channel interrupt moderation values in order to reduce CPU
overhead for all traffic types.
Until now only interrupt and packet rate were sampled.
We found a scenario on which we get a false indication since a change in
DIM caused more aggregation and reduced packet rate while increasing BW.
We now regard a change as succesfull iff:
current_BW > (prev_BW + threshold) or
current_BW ~= prev_BW and current_PR > (prev_PR + threshold) or
current_BW ~= prev_BW and current_PR ~= prev_PR and
current_IR < (prev_IR - threshold)
Where BW = Bandwidth, PR = Packet rate and IR = Interrupt rate
Improvements (ConnectX-4Lx 25GbE, single RX queue, LRO off)
--------------------------------------------------
packet size | before[Mb/s] | after[Mb/s] | gain |
2B | 343.4 | 359.4 | 4.5% |
16B | 2739.7 | 2814.8 | 2.7% |
64B | 9739 | 10185.3 | 4.5% |
Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Remove the following module event counters out of ethtool stats. The
reason for removing these event counters is that these events do not
occur without techinician's intervention.
module_pwr_budget_exd
module_long_range
module_no_eeprom
module_enforce_part
module_unknown_id
module_unknown_status
module_plug
Fixes: bedb7c909c19 ("net/mlx5e: Add port module event counters to ethtool stats")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|