aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/netronome/nfp/nfp_net_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-28nfp: register devlink port before netdevJiri Pirko1-15/+17
Change the init/fini flow and register devlink port instance before netdev. Now it is needed for correct behavior of phys_port_name generation, but in general it makes sense to register devlink port first. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-24nfp: move devlink port type set after netdev registrationJiri Pirko1-2/+7
Similar to other driver, move the port type set after netdev registration is done. Along with that, clear the type before unregistration. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08nfp: pass ctrl_bar pointer to nfp_net_allocJakub Kicinski1-2/+2
Move setting ctrl_bar pointer to the nfp_net_alloc function, to make sure we can parse capabilities early in the following patch. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11nfp: replace long license headers with SPDXJakub Kicinski1-32/+2
Replace the repeated license text with SDPX identifiers. While at it bump the Copyright dates for files we touched this year. Signed-off-by: Edwin Peer <edwin.peer@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Nic Viljoen <nick.viljoen@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-28nfp: pass cpp_id to nfp_cpp_map_area()Jakub Kicinski1-4/+4
Align nfp_cpp_map_area() with other CPP-level APIs and pass encoded cpp_id/dest rather than target, action, domain tuple. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Francois H. Theron <francois.theron@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: assign vNIC id as phys_port_name of vNICs which are not portsJakub Kicinski1-1/+3
When NFP is modelled as a switch we assign phys_port_name to respective port(representor )s: vNIC0 - | - PF port (pf%d) MAC/PHY (p%d[s%d]) - |E== In most cases there is only one vNIC for communication with the switch. If there is more than one we need to be able to identify them. Use %d as phys_port_name of the vNICs. We don't have to pass ID to nfp_net_debugfs_vnic_add() separately any more. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: add shared buffer configurationJakub Kicinski1-0/+7
Allow app FW to advertise its shared buffer pool information. Use the per-PF mailbox to configure them from devlink. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23nfp: move rtsym helpers to pf codeJakub Kicinski1-48/+13
nfp_net_pf_rtsym_read_optional() and nfp_net_pf_map_rtsym() are not really related to networking code. Move them to the PF code and remove the net from their names. They will soon be needed by code outside of nfp_net_main.c anyway. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27nfp: don't depend on eth_tbl being availableJakub Kicinski1-13/+18
For very very old generation of the management FW Ethernet port information table may theoretically not be available. This in turn will cause the nfp_port structures to not be allocated. Make sure we don't crash the kernel when there is no eth_tbl: RIP: 0010:nfp_net_pci_probe+0xf2/0xb40 [nfp] ... Call Trace: nfp_pci_probe+0x6de/0xab0 [nfp] local_pci_probe+0x47/0xa0 work_for_cpu_fn+0x1a/0x30 process_one_work+0x1de/0x3e0 Found while working with broken/development version of management FW. Fixes: a5950182c00e ("nfp: map mac_stats and vf_cfg BARs") Fixes: 93da7d9660ee ("nfp: provide nfp_port to of nfp_net_get_mac_addr()") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19nfp: read ME frequency from vNIC ctrl memoryJakub Kicinski1-6/+0
PCIe island clock frequency is used when converting coalescing parameters from usecs to NFP timestamps. Most chips don't run at 1200MHz, allow FW to provide us with the real frequency. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19nfp: register devlink after app is createdJakub Kicinski1-11/+25
Devlink used to have two global locks: devlink lock and port lock, our lock ordering looked like this: devlink lock -> driver's pf->lock -> devlink port lock After recent changes port lock was replaced with per-instance lock. Unfortunately, new per-instance lock is taken on most operations now. This means we can only grab the pf->lock from the port split/unsplit ops. Lock ordering looks like this: devlink lock -> driver's pf->lock -> devlink instance lock Since we can't take pf->lock from most devlink ops, make sure nfp_apps are prepared to service them as soon as devlink is registered. Locking the pf must be pushed down after nfp_app_init() callback. The init order looks like this: nfp_app_init devlink_register nfp_app_start netdev/port_register As soon as app_init is done nfp_apps must be ready to service devlink-related callbacks. apps can only register their own devlink objects from nfp_app_start. Fixes: 2406e7e546b2 ("devlink: Add per devlink instance lock") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-19nfp: release global resources only on the remove pathJakub Kicinski1-23/+13
NFP app is currently shut down as soon as all the vNICs are gone. This means we can't depend on the app existing throughout the lifetime of the device. Free the app only from PCI remove path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05nfp: resync repr state when port table syncDirk van der Merwe1-0/+6
If the NSP port table has been refreshed, resync the representor state with the new port information. At the moment, this only entails looking for invalid ports and killing off representors associated with them. The repr instance becomes NULL which is safe since the app accessor function for reprs returns NULL when it cannot access a repr. Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-05nfp: make use of MAC reinitJakub Kicinski1-1/+1
Recent management FW images can perform full reinit of MAC cores without requiring a reboot. When loading the driver check if there are changes pending and if so call NSP MAC reinit. Full application FW reload is still required, and all MACs need to be reinited at the same time (not only the ones which have been reconfigured, and thus potentially causing disruption to unrelated netdevs) therefore for now changing MAC config without reloading the driver still remains future work. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-13nfp: wait for board state before talking to the NSPJakub Kicinski1-23/+0
Board state informs us which low-level initialization stages the card has completed. We should wait for the card to be fully initialized before trying to communicate with it, not only before we configure passing traffic. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: move the start/stop app callbacks backJakub Kicinski1-15/+11
Since representors are now created with a separate callback start/stop app callbacks can be moved again to their original location. They are intended to app-specific init/clean up over the control channel. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-03nfp: separate app vNIC init/clean from alloc/freeJakub Kicinski1-2/+14
We currently only have one app callback for vNIC creation and destruction. This is insufficient, because some actions have to be taken before netdev is registered, after it's registered and after it's unregistered. Old callbacks were really corresponding to alloc/free actions. Rename them and add proper init/clean. Apps using representors will be able to use new callbacks to manage lifetime of upper devices. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-11/+15
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-29nfp: double free on error in probeDan Carpenter1-3/+1
Both the nfp_net_pf_app_start() and the nfp_net_pci_probe() functions call nfp_net_pf_app_stop_ctrl(pf) so there is a double free. The free should be done from the probe function because it's allocated there so I have removed the call from nfp_net_pf_app_start(). Fixes: 02082701b974 ("nfp: create control vNICs and wire up rx/tx") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-25nfp: add basic SR-IOV ndo functionsPablo Cascón1-1/+19
Add basic ndo_set/get_vf to support SR-IOV. VF to egress phy static mapping by now. Use vfcfg ABI version 2 to write the info to the FW and collect the return value from the mailbox. Signed-off-by: Pablo Cascón <pablo.cascon@netronome.com> Signed-off-by: Jimmy Kizito <jimmy.kizito@netronome.com> Signed-off-by: Rami Tomer <rami.tomer@netronome.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-23nfp: make sure representors are destroyed before their lower netdevJakub Kicinski1-8/+14
App start/stop callbacks can perform application initialization. Unfortunately, flower app started using them for creating and destroying representors. This can lead to a situation where lower vNIC netdev is destroyed while representors still try to pass traffic. This will most likely lead to a NULL-dereference on the lower netdev TX path. Move the start/stop callbacks, so that representors are created/ destroyed when vNICs are fully initialized. Fixes: 5de73ee46704 ("nfp: general representor implementation") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-18nfp: fix copy paste in names and messages regarding vNICsJakub Kicinski1-2/+2
Data and control vNICs currently use the same area name and error message. This could lead to confusion. Make sure the error message says "ctrl" in case of control and the data area is called "nfp.bar0". Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-27nfp: remove the probe deferral when FW not presentJakub Kicinski1-1/+1
We use a hack to defer probe when firmware was not pre-loaded or found on disk. This helps in case users forgot to include firmware in initramfs, the driver will most likely get another shot at probing after real root is mounted. This is not for what EPROBE_DEFER is supposed to be used, and when FW is completely missing every time new device is probed NFP will reprobe spamming kernel logs. Remove this hack, users will now have to make sure the right firmware image is present in initramfs if nfp.ko is placed there or built in. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05nfp: remove legacy MAC address lookupJakub Kicinski1-29/+5
The legacy MAC address lookup doesn't work well with breakout cables. We are probably better off picking random addresses than the wrong ones in the theoretical scenario where management FW didn't tell us what the port config is. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-05nfp: improve order of interfaces in breakout modeJakub Kicinski1-5/+5
For historical reasons we enumerate the vNICs in order. This means that if user configures breakout on a multiport card, the first interface of the second port will have its MAC address changed. What's worse, when moved from static information (HWInfo) to using management FW (NSP), more features started depending on the port ids. Right now in case of breakout first subport of the second port and second subport of the first port will have their link info swapped. Revise the ordering scheme so that first subport maintains its address. Side effect of this change is that we will use base lane ids in devlink (i.e. 40G ports will be 4 ids apart), e.g.: pci/0000:04:00.0/0: type eth netdev p6p1 pci/0000:04:00.0/4: type eth netdev p6p2 Note that behaviour of phys_port_id is not changed since there is a separate id number for the subport there. Fixes: ec8b1fbe682d ("nfp: support port splitting via devlink") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: allocate a private workqueue for driver workJakub Kicinski1-1/+1
Since we grab pf->lock around pci_enable_sriov() we can no longer safely queue work which may also grab that lock onto system workqueue. pci_enable_sriov() will flush system workqueue as part to wait for VF probing. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: reorder SR-IOV config and nfp_app SR-IOV callbacksJakub Kicinski1-0/+10
We previously assumed that app callback can be guaranteed to be executed before SR-IOV is actually enabled. Given that we can't guarantee that SR-IOV will be disabled during probe or that we will be able to disable it on remove, we should reorder the callbacks. We should also call the app's sriov_enable if SR-IOV was enabled during probe. Application FW must be able to disable VFs internally and not depend on them being removed at PCIe level. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: add nfp_app cleanup callback and make flower use itJakub Kicinski1-1/+5
Add a cleanup callback for undoing what app init callback did. Make flower allocate its private structure on init and free it from the new callback. While at it remember to set the app pointer to NULL on the error path to avoid any races while probe path unwinds. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: add helper for mapping runtime symbolsJakub Kicinski1-28/+8
Move most of the helper for mapping RTsyms from nfp_net_main.c to nfpcore. Use the new helper directly for mapping MAC statistics, since they don't need to include the PCIe interface ID in the symbol name. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: move area mapping helper into nfpcoreJakub Kicinski1-54/+2
nfp_net_map_area() is a helper for mapping areas of NFP memory defined in nfp_net_main.c. Move it to nfpcore to allow reuse and rename accordingly. Create an additional helper - nfp_cpp_area_alloc_acquire() the opposite of already existing nfp_cpp_area_release_free(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-27nfp: explicitly check if application FW is loadedJakub Kicinski1-4/+7
We support application FW being either loaded automatically at boot from flash or (more commonly) by the driver from disk. If FW is not found on disk and nothing is preloaded users are faced with this unintuitive error: nfp 0000:04:00.0: nfp: Failed to find PF symbol _pf0_net_bar0 We can do better. Since we rely on symbol table being present - check early if it could be correctly read out of from the device and if not print a more informative message. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25nfp: provide nfp_port to of nfp_net_get_mac_addr()Simon Horman1-13/+12
Provide port rather than vNIC as parameter of nfp_net_get_mac_addr. This is to allow this function to be used by representor netdevs where a vNIC may have more than one physical port none of which are associated with the vNIC. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-25nfp: map mac_stats and vf_cfg BARsSimon Horman1-32/+90
If present map mac_stats and vf_cfg BARs. These will be used by representor netdevs to read statistics for phys port and vf representors. Also provide defines describing the layout of the mac_stats area. Similar defines are already present for the cf_cfg area. Based in part on work by Jakub Kicinski. Signed-off-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: remove automatic caching of HWInfoJakub Kicinski1-6/+6
Make callers take care of managing life time of HWInfo. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: remove automatic caching of RTsym tableJakub Kicinski1-2/+2
The fact that RTsym table is cached inside nfp_cpp handle is a relic of old times when nfpcore was a library module. All the nfp_cpp "caches" are awkward to deal with because of concurrency and prone to keeping stale information. Make the run time symbol table be an object read out from the device and managed by whoever requested it. Since the driver loads FW at ->probe() and never reloads, we can hold onto the table for ever. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-09nfp: make sure to cancel port refresh on the error pathJakub Kicinski1-0/+1
If very last stages of netdev registering and init fail some other netdevs and devlink ports may have been visible to user space before we torn them back down. In this case there is a slight chance user may have triggered port refresh. We need to make sure the async work is cancelled. We have to cancel after releasing pf->lock, so we will always try to cancel, regardless of which part of probe has failed. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: advertise support for NFD ABI 0.5Jakub Kicinski1-1/+1
NFD ABI 0.5 is equivalent to NFD ABI 3.0 but requires that the driver checks the APP id symbol and makes sure it can support given app. Most advanced apps will likely require control vNIC (ability to exchange control messages between the driver and app FW). Detailed app version checking and capability exchange is left to app-specific code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: create control vNICs and wire up rx/txJakub Kicinski1-14/+107
When driver encounters an nfp_app which has a control message handler defined, allocate a control vNIC. This control channel will be used to exchange data with the application FW such as flow table programming, statistics and global datapath control. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: allow non-equal distribution of IRQsJakub Kicinski1-1/+2
Thus far the code assumed all vNICs will request similar number of IRQs. This will be no longer true with control vNICs (where 1 IRQ will suffice). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: slice the netdev spawning functionJakub Kicinski1-25/+37
We want to be able to create a special vNIC for control messages. This vNIC should be created before any netdev is registered to allow nfp_app logic to exchange messages with the FW app before any netdev is visible to user space. Unfortunately we can't enable IRQs until we know how many vNICs we will need to spawn. Divide the function which spawns netdevs for vNICs into three parts: - vNIC/memory allocation; - IRQ allocation; - netdev init and register. This will help us insert the initialization of the control channel after IRQ allocation but before netdev init and register. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: don't clutter init code passing fw_ver aroundJakub Kicinski1-10/+7
Reading fw version from the BAR is trivial. Don't pass it around through layers of init functions, simply read it again where needed. This commit has the side effect of each vNIC having the exact NFD version from its own control memory, rather than all data vNICs assuming the version of the first one. This should not result in user-visible changes, though. Capabilities of data vNICs of trival apps are identical. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: map all queue controllers at onceJakub Kicinski1-97/+25
RX and TX queue controllers are interleaved. Instead of creating two mappings which map the same area at slightly different offset, create only one mapping. Always map all queue controllers to simplify the code and allow reusing the mapping for non-data vNICs. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: make vNIC ctrl memory mapping function reusableJakub Kicinski1-27/+28
We will soon need to map control vNIC PCI memory as well as data vNIC memory. Make the function for mapping areas pointed to by an RTsym reusable. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-07nfp: allow allocation and initialization of netdev-less vNICsJakub Kicinski1-3/+4
vNICs used for sending and receiving control messages shouldn't really have a netdev. Add the ability to initialize vNICs for netdev-less operation. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31nfp: move bpf offload code to the BPF appJakub Kicinski1-0/+1
Move bulk of the eBPF offload code out of common vNIC code into app-specific callbacks. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31nfp: move port init to appsJakub Kicinski1-32/+29
Start fleshing out the apps by turning the vNIC init code to a per-app callback. The two initial apps we have are NIC and eBPF. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-31nfp: turn reading PCIe RTsym parameters into a helperJakub Kicinski1-7/+17
Turn the function to read number of ports into a generic helper. While at it make sure we propagate all errors other than -ENOENT. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: support port splitting via devlinkJakub Kicinski1-7/+16
Add support for configuring port split with devlink. Add devlink callbacks to validate requested config and call NSP helpers. Getting the right nfp_port structure can be done with simple iteration. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: register ports as devlink portsJakub Kicinski1-0/+13
Extend nfp_port to contain devlink_port structures. Register the ports to allow users inspecting device ports. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-26nfp: add helper for cleaning up vNICsJakub Kicinski1-12/+11
We will soon have to invoke more clean up for vNICs. Move the cleanup callbacks into a helper. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.