aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/oki-semi (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2016-01-07phy: Add phydev_err() and phydev_dbg() macrosAndrew Lunn5-13/+23
In preparation for moving some of the phy_device structure members, add macros for printing errors and debug information. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Use phy_read() instead of mdiobus_read()Andrew Lunn1-68/+36
Since we have a phydev, make use of it and the phy_read() function. This will help with later refactoring. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07mdio: Move mdiobus_read/write operatings into mdio.hAndrew Lunn2-5/+7
These are logically MDIO operations, not phy operations, so move them into the mdio header. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-07phy: Consistently use addr for address on an MII busAndrew Lunn1-2/+2
Within phy.h, an address on an MII bus has been called both addr and phy_id. phy_id is particularly confusion, since it also means the ID found in register 3, if the device on the bus is a phy. Consistently use addr. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06tcp: fix zero cwnd in tcp_cwnd_reductionYuchung Cheng1-0/+3
Patch 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") introduced a bug that cwnd may become 0 when both inflight and sndcnt are 0 (cwnd = inflight + sndcnt). This may lead to a div-by-zero if the connection starts another cwnd reduction phase by setting tp->prior_cwnd to the current cwnd (0) in tcp_init_cwnd_reduction(). To prevent this we skip PRR operation when nothing is acked or sacked. Then cwnd must be positive in all cases as long as ssthresh is positive: 1) The proportional reduction mode inflight > ssthresh > 0 2) The reduction bound mode a) inflight == ssthresh > 0 b) inflight < ssthresh sndcnt > 0 since newly_acked_sacked > 0 and inflight < ssthresh Therefore in all cases inflight and sndcnt can not both be 0. We check invalid tp->prior_cwnd to avoid potential div0 bugs. In reality this bug is triggered only with a sequence of less common events. For example, the connection is terminating an ECN-triggered cwnd reduction with an inflight 0, then it receives reordered/old ACKs or DSACKs from prior transmission (which acks nothing). Or the connection is in fast recovery stage that marks everything lost, but fails to retransmit due to local issues, then receives data packets from other end which acks nothing. Fixes: 3759824da87b ("tcp: PRR uses CRB mode by default and SS mode conditionally") Reported-by: Oleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: Add eth_platform_get_mac_address() helper.David S. Miller3-0/+41
A repeating pattern in drivers has become to use OF node information and, if not found, platform specific host information to extract the ethernet address for a given device. Currently this is done with a call to of_get_mac_address() and then some ifdef'd stuff for SPARC. Consolidate this into a portable routine, and provide the arch_get_platform_mac_address() weak function hook for all architectures to implement if they want. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06Driver: Vmxnet3: Fix regression caused by 5738a09Shrikrishna Khare2-6/+6
Reported-by: Bingkuo Liu <bingkuol@vmware.com> Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: move ndo_features_check() close to ndo_start_xmit()Eric Dumazet1-11/+11
TX fast path uses ndo_start_xmit(), ndo_features_check() and ndo_select_queue(). Move ndo_features_check() close to ndo_start_xmit() to increase data locality. All "struct net_device_ops" should now be using C99 initializers. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: qmi_wwan: Add WeTelecom-WPD600NKristian Evensen1-0/+1
The WeTelecom-WPD600N is an LTE module that, in addition to supporting most "normal" bands, also supports LTE over 450MHz. Manual testing showed that only interface number three replies to QMI messages. Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: double free on probe failureDan Carpenter1-1/+0
"priv" is allocated with devm_kzalloc() so freeing it here with kfree() will lead to a double free. Fixes: 3933961682a3 ('fsl/fman: Add FMan MAC driver') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06fsl/fman: fix the pause_time testDan Carpenter1-1/+1
pause_time is unsigned so it can't be less than zero. The bug means that we allow invalid pause-times. Fixes: 57ba4c9b56d8 ('fsl/fman: Add FMan MAC support') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: core: remove an unnecessary conditionDan Carpenter1-1/+1
We checked "err" on the lines before so we know it's zero here. These cause a static checker warning because checking known things can indicate a bug. Maybe there is a missing assignment or we are checking the wrong variable. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mkiss: fix scribble on freed memoryAlan1-0/+5
commit d79f16c046086f4fe0d42184a458e187464eb83e fixed a user triggerable scribble on free memory but added a new one which allows the user to scribble even more and user controlled data into freed space. As with 6pack we need to halt the queue before we free the buffers, because the transmit logic is not protected by the semaphore. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ethernet/atheros/alx: sanitize buffer sizing and paddingJarod Wilson3-12/+14
This is based on the work done by Przemek Rudy in bug 70761 at bugzilla.kernel.org, but with some work done to disentagle and clarify things a bit. Similar to Przemek's work and other drivers, we're adding a padding of 16 here, but we're also disentangling mtu size calculations from max buffer size calculations a bit, and adding ETH_HLEN to the value written into ALX_MTU. Hopefully, with a bit more consistency and clarity, things behave better here. Sadly, I can only test in my alx-driven E2200, which worked just fine before this patch. In comment #58 of bug 70761, Eugene A. Shatokhin reports that this patch does help considerably for a ROSA Linux user of his with an AR8162 network adapter when patched into a 4.1.x-based kernel, with several days of normal operation where wired network previously wasn't usable without setting MTU to 9000 as a work-around. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=70761 CC: "Eugene A. Shatokhin" <eugene.shatokhin@rosalab.ru> CC: Przemek Rudy <prudy1@o2.pl> CC: Jay Cliburn <jcliburn@gmail.com> CC: Chris Snook <chris.snook@gmail.com> CC: netdev@vger.kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: possible use after free in dst_releaseFrancesco Ruggeri1-1/+2
dst_release should not access dst->flags after decrementing __refcnt to 0. The dst_entry may be in dst_busy_list and dst_gc_task may dst_destroy it before dst_release gets a chance to access dst->flags. Fixes: d69bbf88c8d0 ("net: fix a race in dst_release()") Fixes: 27b75c95f10d ("net: avoid RCU for NOCACHE dst") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Remember untagged VLANsElad Raz3-1/+17
When a vlan is been configured, remeber the untagged mode of the vlan. When displaying the list of configured VLANs, show the untagged attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Disable vlan_filtering for non .1D bridgeElad Raz1-0/+21
When a port is bridged, the bridge must be vlan aware bridge (.1Q) or the bridging should be on top of VLAN interfaces (.1D bridge). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Renaming local variable names for consistencyElad Raz1-3/+3
Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: Fixing vlans init rangeElad Raz1-1/+2
Initialize VLANs 0..4095 (Remove init for VID 4096). Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: add vlan filtering change for new bridged deviceElad Raz1-0/+11
Notifying hardware about newly bridged port vlan-aware changes. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: add vlan filtering change notificationElad Raz1-2/+16
Notifying hardware about bridge vlan-aware changes. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06switchdev: add bridge vlan_filtering attributeElad Raz1-0/+2
Adding vlan_filtering attribute to allow hardware vendor to support vlan-aware bridges. Vlan_filtering is a per-bridge attribute. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06bridge: Propagate vlan add failure to userElad Raz1-1/+10
Disallow adding interfaces to a bridge when vlan filtering operation failed. Send the failure code to the user. Signed-off-by: Elad Raz <eladr@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: sched: fix missing free per cpu on qstatsJohn Fastabend1-1/+3
When a qdisc is using per cpu stats (currently just the ingress qdisc) only the bstats are being freed. This also free's the qstats. Fixes: b0ab6f92752b9f9d8 ("net: sched: enable per cpu qstats") Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06ARM: net: bpf: fix zero right shiftRabin Vincent1-1/+2
The LSR instruction cannot be used to perform a zero right shift since a 0 as the immediate value (imm5) in the LSR instruction encoding means that a shift of 32 is perfomed. See DecodeIMMShift() in the ARM ARM. Make the JIT skip generation of the LSR if a zero-shift is requested. This was found using american fuzzy lop. Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06soreuseport: change consume_skb to kfree_skb in error caseCraig Gallek1-1/+1
Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06soreuseport: pass skb to secondary UDP socket lookupCraig Gallek3-8/+59
This socket-lookup path did not pass along the skb in question in my original BPF-based socket selection patch. The skb in the udpN_lib_lookup2 path can be used for BPF-based socket selection just like it is in the 'traditional' udpN_lib_lookup path. udpN_lib_lookup2 kicks in when there are greater than 10 sockets in the same hlist slot. Coincidentally, I chose 10 sockets per reuseport group in my functional test, so the lookup2 path was not excersised. This adds an additional set of tests with 20 sockets. Fixes: 538950a1b752 ("soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPF") Fixes: 3ca8e4029969 ("soreuseport: BPF selection functional test") Suggested-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-066pack: fix free memory scribblesOne Thousand Gnomes1-0/+6
commit acf673a3187edf72068ee2f92f4dc47d66baed47 fixed a user triggerable free memory scribble but in doing so replaced it with a different one that allows the user to control the data and scribble even more. sixpack_close is called by the tty layer in tty context. The tty context is protected by sp_get() and sp_put(). However network layer activity via sp_xmit() is not protected this way. We must therefore stop the queue otherwise the user gets to dump a buffer mostly of their choice into freed kernel pages. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06mlxsw: pci: Adjust value of CPU egress traffic classIdo Schimmel1-1/+1
During initialization, when creating the send descriptor queues (SDQs), we specify the CPU egress traffic class of each SDQ. The maximum number of classes of this type is different in the two ASICs supported by this PCI driver. New firmware versions check this value is set correctly, which causes errors on the Spectrum ASIC, as its max exposed egress traffic class is lower than 7. Solve this by setting this field to 3, which is an acceptable value for both ASICs. Note that we currently do not expose the QoS capabilities of the ASICs, so setting this to an hardcoded value is OK for now. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: filter: make JITs zero A for SKF_AD_ALU_XOR_XRabin Vincent5-56/+25
The SKF_AD_ALU_XOR_X ancillary is not like the other ancillary data instructions since it XORs A with X while all the others replace A with some loaded value. All the BPF JITs fail to clear A if this is used as the first instruction in a filter. This was found using american fuzzy lop. Add a helper to determine if A needs to be cleared given the first instruction in a filter, and use this in the JITs. Except for ARM, the rest have only been compile-tested. Fixes: 3480593131e0 ("net: filter: get rid of BPF_S_* enum") Signed-off-by: Rabin Vincent <rabin@rab.in> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-06net: hns: avoid uninitialized variable warning:Arnd Bergmann1-25/+22
gcc fails to see that the use of the 'last_offset' variable in hns_nic_reuse_page() is used correctly and issues a bogus warning: drivers/net/ethernet/hisilicon/hns/hns_enet.c: In function 'hns_nic_reuse_page': drivers/net/ethernet/hisilicon/hns/hns_enet.c:541:6: warning: 'last_offset' may be used uninitialized in this function [-Wmaybe-uninitialized] This simplifies the function to make it more obvious what is going on to both readers and compilers, which makes the warning go away. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05inet: kill unused skb_free opFlorian Westphal5-13/+1
The only user was removed in commit 029f7f3b8701cc7a ("netfilter: ipv6: nf_defrag: avoid/free clone operations"). Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05bridge: Only call /sbin/bridge-stp for the initial network namespaceHannes Frederic Sowa1-1/+4
[I stole this patch from Eric Biederman. He wrote:] > There is no defined mechanism to pass network namespace information > into /sbin/bridge-stp therefore don't even try to invoke it except > for bridge devices in the initial network namespace. > > It is possible for unprivileged users to cause /sbin/bridge-stp to be > invoked for any network device name which if /sbin/bridge-stp does not > guard against unreasonable arguments or being invoked twice on the > same network device could cause problems. [Hannes: changed patch using netns_eq] Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05include/uapi/linux/sockios.h: mark SIOCRTMSG unusedxypron.glpk@gmx.de1-1/+1
IOCTL SIOCRTMSG does nothing but return EINVAL. So comment it as unused. SIOCRTMSG is only used in: * net/ipv4/af_inet.c * include/uapi/linux/sockios.h inet_ioctl calls ip_rt_ioctl. ip_rt_ioctl only handles SIOCADDRT and SIOCDELRT and returns -EINVAL otherwise. Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Add PTP Hardware Clock (PHC) supportEran Ben Elisha4-1/+106
Add a PHC support to the mlx5_en driver. Use reader/writer spinlocks to protect the timecounter since every packet received needs to call timecounter_cycle2time() when timestamping is enabled. This can become a performance bottleneck with RSS and multiple receive queues if normal spinlocks are used. The driver has been tested with both Documentation/ptp/testptp and the linuxptp project (http://linuxptp.sourceforge.net/) on a Mellanox ConnectX-4 card. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Add HW timestamping (TS) supportEran Ben Elisha7-2/+279
Add support for enable/disable HW timestamping for incoming and/or outgoing packets. To enable/disable HW timestamping appropriate ioctl should be used. Currently HWTSTAMP_FILTER_ALL/NONE and HWTSAMP_TX_ON/OFF only are supported. Make all relevant changes in RX/TX flows to consider TS request and plant HW timestamps into relevant structures. Add internal clock for converting hardware timestamp to nanoseconds. In addition, add a service task to catch internal clock overflow, to make sure timestamping is accurate. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5_core: Introduce access function to read internal timerEran Ben Elisha4-6/+34
A preparation step which adds support for reading the hardware internal timer and the hardware timestamping from the CQE. In addition, advertize device_frequency_khz HCA capability. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05net/mlx5e: Do not modify the TX SKBAchiad Shochat3-34/+49
If the SKB is cloned, or has an elevated users count, someone else can be looking at it at the same time. Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: remove the local_bh_disable/enable in sctp_endpoint_lookup_assocXin Long1-16/+1
sctp_endpoint_lookup_assoc is called in the protection of sock lock there is no need to call local_bh_disable in this function. so remove them. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: drop the old assoc hashtable of sctpXin Long6-122/+3
transport hashtable will replace the association hashtable, so association hashtable is not used in sctp any more, so drop the codes about that. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: apply rhashtable api to sctp procfsXin Long1-143/+173
Traversal the transport rhashtable, get the association only once through the condition assoc->peer.primary_path != transport. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: apply rhashtable api to send/recv pathXin Long4-56/+29
apply lookup apis to two functions, for __sctp_endpoint_lookup_assoc and __sctp_lookup_association, it's invoked in the protection of sock lock, it will be safe, but sctp_lookup_association need to call rcu_read_lock() and to detect the t->dead to protect it. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05sctp: add the rhashtable apis for sctp global transport hashtableXin Long3-0/+147
tranport hashtbale will replace the association hashtable to do the lookup for transport, and then get association by t->assoc, rhashtable apis will be used because of it's resizable, scalable and using rcu. lport + rport + paddr will be the base hashkey to locate the chain, with net to protect one netns from another, then plus the laddr to compare to get the target. this patch will provider the lookup functions: - sctp_epaddr_lookup_transport - sctp_addrs_lookup_transport hash/unhash functions: - sctp_hash_transport - sctp_unhash_transport init/destroy functions: - sctp_transport_hashtable_init - sctp_transport_hashtable_destroy Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05tile: provide CONFIG_PAGE_SIZE_64KB etc for tileproChris Metcalf2-9/+10
This allows the build system to know that it can't attempt to configure the Lustre virtual block device, for example, when tilepro is using 64KB pages (as it does by default). The tilegx build already provided those symbols. Previously we required that the tilepro hypervisor be rebuilt with a different hardcoded page size in its headers, and then Linux be rebuilt using the updated hypervisor header. Now we allow each of the hypervisor and Linux to be built independently. We still check at boot time to ensure that the page size provided by the hypervisor matches what Linux expects. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: stable@vger.kernel.org [3.19+]
2016-01-04af_unix: Fix splice-bind deadlockRainer Weikusat1-26/+40
On 2015/11/06, Dmitry Vyukov reported a deadlock involving the splice system call and AF_UNIX sockets, http://lists.openwall.net/netdev/2015/11/06/24 The situation was analyzed as (a while ago) A: socketpair() B: splice() from a pipe to /mnt/regular_file does sb_start_write() on /mnt C: try to freeze /mnt wait for B to finish with /mnt A: bind() try to bind our socket to /mnt/new_socket_name lock our socket, see it not bound yet decide that it needs to create something in /mnt try to do sb_start_write() on /mnt, block (it's waiting for C). D: splice() from the same pipe to our socket lock the pipe, see that socket is connected try to lock the socket, block waiting for A B: get around to actually feeding a chunk from pipe to file, try to lock the pipe. Deadlock. on 2015/11/10 by Al Viro, http://lists.openwall.net/netdev/2015/11/10/4 The patch fixes this by removing the kern_path_create related code from unix_mknod and executing it as part of unix_bind prior acquiring the readlock of the socket in question. This means that A (as used above) will sb_start_write on /mnt before it acquires the readlock, hence, it won't indirectly block B which first did a sb_start_write and then waited for a thread trying to acquire the readlock. Consequently, A being blocked by C waiting for B won't cause a deadlock anymore (effectively, both A and B acquire two locks in opposite order in the situation described above). Dmitry Vyukov(<dvyukov@google.com>) tested the original patch. Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04net: Propagate lookup failure in l3mdev_get_saddr to callerDavid Ahern5-14/+33
Commands run in a vrf context are not failing as expected on a route lookup: root@kenny:~# ip ro ls table vrf-red unreachable default root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 ping: Warning: source address might be selected on device other than vrf-red. PING 10.100.1.254 (10.100.1.254) from 0.0.0.0 vrf-red: 56(84) bytes of data. --- 10.100.1.254 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 999ms Since the vrf table does not have a route for 10.100.1.254 the ping should have failed. The saddr lookup causes a full VRF table lookup. Propogating a lookup failure to the user allows the command to fail as expected: root@kenny:~# ping -I vrf-red -c1 -w1 10.100.1.254 connect: No route to host Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: BPF selection functional testCraig Gallek3-1/+469
This program will build classic and extended BPF programs and validate the socket selection logic when used with SO_ATTACH_REUSEPORT_CBPF and SO_ATTACH_REUSEPORT_EBPF. It also validates the re-programing flow and several edge cases. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: setsockopt SO_ATTACH_REUSEPORT_[CE]BPFCraig Gallek22-44/+282
Expose socket options for setting a classic or extended BPF program for use when selecting sockets in an SO_REUSEPORT group. These options can be used on the first socket to belong to a group before bind or on any socket in the group after bind. This change includes refactoring of the existing sk_filter code to allow reuse of the existing BPF filter validation checks. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: fast reuseport UDP socket selectionCraig Gallek5-35/+141
Include a struct sock_reuseport instance when a UDP socket binds to a specific address for the first time with the reuseport flag set. When selecting a socket for an incoming UDP packet, use the information available in sock_reuseport if present. This required adding an additional field to the UDP source address equality function to differentiate between exact and wildcard matches. The original use case allowed wildcard matches when checking for existing port uses during bind. The new use case of adding a socket to a reuseport group requires exact address matching. Performance test (using a machine with 2 CPU sockets and a total of 48 cores): Create reuseport groups of varying size. Use one socket from this group per user thread (pinning each thread to a different core) calling recvmmsg in a tight loop. Record number of messages received per second while saturating a 10G link. 10 sockets: 18% increase (~2.8M -> 3.3M pkts/s) 20 sockets: 14% increase (~2.9M -> 3.3M pkts/s) 40 sockets: 13% increase (~3.0M -> 3.4M pkts/s) This work is based off a similar implementation written by Ying Cai <ycai@google.com> for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-04soreuseport: define reuseport groupsCraig Gallek4-1/+196
struct sock_reuseport is an optional shared structure referenced by each socket belonging to a reuseport group. When a socket is bound to an address/port not yet in use and the reuseport flag has been set, the structure will be allocated and attached to the newly bound socket. When subsequent calls to bind are made for the same address/port, the shared structure will be updated to include the new socket and the newly bound socket will reference the group structure. Usually, when an incoming packet was destined for a reuseport group, all sockets in the same group needed to be considered before a dispatching decision was made. With this structure, an appropriate socket can be found after looking up just one socket in the group. This shared structure will also allow for more complicated decisions to be made when selecting a socket (eg a BPF filter). This work is based off a similar implementation written by Ying Cai <ycai@google.com> for implementing policy-based reuseport selection. Signed-off-by: Craig Gallek <kraig@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.