aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic/qede (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-07qede: Fix internal loopback failure with jumbo mtu configurationSudarsana Reddy Kalluru1-2/+5
Driver uses port-mtu as packet-size for the loopback traffic. This patch limits the max packet size to 1.5K to avoid data being split over multiple buffer descriptors (BDs) in cases where MTU > PAGE_SIZE. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08qede: Add ethtool interface for SmartAN query.Sudarsana Reddy Kalluru1-1/+10
The patch adds driver support to query SmartAN capability via ethtool. Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Michal Kalderon <mkalderon@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-1/+20
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06qed*: Advance drivers version to 8.37.0.20Manish Chopra1-1/+1
Version update for qed/qede modules. Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06qede: Fix system crash on configuring channels.Sudarsana Reddy Kalluru3-0/+19
Under heavy traffic load, when changing number of channels via ethtool (ethtool -L) which will cause interface to be reloaded, it was observed that some packets gets transmitted on old TX channel/queue id which doesn't really exist after the channel configuration leads to system crash. Add a safeguard in the driver by validating queue id through ndo_select_queue() which is called before the ndo_start_xmit(). Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06qede: use ethtool_rx_flow_rule() to remove duplicated parser codePablo Neira Ayuso1-203/+76
The qede driver supports for ethtool_rx_flow_spec and flower, both codebases look very similar. This patch uses the ethtool_rx_flow_rule() infrastructure to remove the duplicated ethtool_rx_flow_spec parser and consolidate ACL offload support around the flow_rule infrastructure. Furthermore, more code can be consolidated by merging qede_add_cls_rule() and qede_add_tc_flower_fltr(), these two functions also look very similar. This driver currently provides simple ACL support, such as 5-tuple matching, drop policy and queue to CPU. Drivers that support more features can benefit from this infrastructure to save even more redundant codebase. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06qede: place ethtool_rx_flow_spec after code after TC flower codebasePablo Neira Ayuso1-132/+132
This is a preparation patch to reuse the existing TC flower codebase from ethtool_rx_flow_spec. This patch is merely moving the core ethtool_rx_flow_spec parser after tc flower offload driver code so we can skip a few forward function declarations in the follow up patch. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06drivers: net: use flow action infrastructurePablo Neira Ayuso1-6/+6
This patch updates drivers to use the new flow action infrastructure. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06flow_offload: add flow_rule and flow_match structures and use themPablo Neira Ayuso1-49/+36
This patch wraps the dissector key and mask - that flower uses to represent the matching side - around the flow_match structure. To avoid a follow up patch that would edit the same LoCs in the drivers, this patch also wraps this new flow match structure around the flow rule object. This new structure will also contain the flow actions in follow up patches. This introduces two new interfaces: bool flow_rule_match_key(rule, dissector_id) that returns true if a given matching key is set on, and: flow_rule_match_XYZ(rule, &match); To fetch the matching side XYZ into the match container structure, to retrieve the key and the mask with one single call. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-28qede: Error recovery processTomer Tayar3-70/+288
This patch adds the error recovery process in the qede driver. The process includes a partial/customized driver unload and load, which allows it to look like a short suspend period to the kernel while preserving the net devices' state. Signed-off-by: Tomer Tayar <tomer.tayar@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30qede: Register l2 queues with doorbell overflow recovery mechanismAriel Elior1-0/+9
All L2 queues funnel through this flow, so this would cover the regular RSS queues, as well queues created for VFs, mqos queues, xdp queues, etc. Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Tomer Tayar <Tomer.Tayar@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29qede - Add a statistic for a case where driver drops tx packet due to memory allocation failure.Michael Shteinbok3-2/+4
skb_linearization can fail due to memory allocation failure. In such a case, the driver will drop the packet. In such a case The driver used to print an error message. This patch replaces this error message by a dedicated statistic. Signed-off-by: Michael Shteinbok <michael.shteinbok@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qede: Update link status only when interface is ready.Sudarsana Reddy Kalluru2-2/+7
In the case of internal reload (e.g., mtu change), there could be a race between link-up notification from mfw and the driver unload processing. In such case kernel assumes the link is up and starts using the queues which leads to the server crash. Send link notification to the kernel only when driver has already requested MFW for the link. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-27qede: Simplify the usage of qede-flags.Sudarsana Reddy Kalluru3-8/+11
The values represented by qede->flags is being used in mixed ways: 1. As 'value' at some places e.g., QEDE_FLAGS_IS_VF usage 2. As bit-mask(value) at some places e.g., QEDE_FLAGS_PTP_TX_IN_PRORGESS usage. This implementation pose problems in future when we want to add more flag values e.g., overlap of the values, overflow of 64-bit storage. Updated the implementation to go with approach (2) for qede->flags. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16qede: Check available link modes before link set from ethtool.Rahul Verma1-19/+45
Set link mode after checking available "supported" link caps of the port. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-16qed: Add supported link and advertise link to display in ethtool.Rahul Verma1-4/+27
Added transceiver type, speed capability and board types in HSI, are utilizing to display the accurate link information in ethtool. Signed-off-by: Rahul Verma <Rahul.Verma@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-02qede: Add driver support for 20G link speed.Sudarsana Reddy Kalluru1-0/+9
Add driver support for reading/configuring the 20G link speed via ethtool. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-19net: qede: Use FIELD_SIZEOF directly instead of reimplementing its functionzhong jiang1-1/+1
FIELD_SIZEOF is defined as a macro to calculate the specified value. Therefore, We prefer to use the macro rather than calculating its value. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove list_head from tc_actionCong Wang1-4/+2
After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-10qed/qede: qede_setup_tc() can be statickbuild test robot1-1/+1
Fixes: 5e7baf0fcb2a ("qed/qede: Multi CoS support.") Signed-off-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09qede: Ingress tc flower offload (drop action) support.Manish Chopra4-11/+362
The main motive of this patch is to lay down driver's tc offload infrastructure in place. With these changes tc can offload various supported flow profiles (4 tuples, src-ip, dst-ip, l4 port) for the drop action. Dropped flows statistic is a global counter for all the offloaded flows for drop action and is populated in ethtool statistics as common "gft_filter_drop". Examples - tc qdisc add dev p4p1 ingress tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_ip 192.168.40.200 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto udp src_ip 192.168.40.100 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp src_ip 192.168.40.100 dst_ip 192.168.40.200 \ src_port 453 dst_port 876 action drop tc filter add dev p4p1 protocol ipv4 parent ffff: flower \ skip_sw ip_proto tcp dst_port 98 action drop Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09qede: Add destination ip based flow profile.Manish Chopra1-48/+66
This patch adds support for dropping and redirecting the flows based on destination IP in the packet. This also moves the profile mode settings in their own functions which can be used through tc flows in successive patch. For example - ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.40.100 action -1 ethtool -N p5p1 flow-type udp4 dst-ip 192.168.50.100 action 1 ethtool -N p5p1 flow-type tcp4 dst-ip 192.168.60.100 action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09qed/qede: Multi CoS support.Manish Chopra4-44/+185
This patch adds support for tc mqprio offload, using this different traffic classes on the adapter can be utilized based on configured priority to tc map. For example - tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 This will cause SKBs with priority 0,1,2,3 to transmit over tc 0,1,2,3 hardware queues respectively. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-07qede: qede_fp: Mark expected switch fall-throughGustavo A. R. Silva1-0/+2
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1384501 ("Missing break in switch") Addresses-Coverity-ID: 1398869 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-19qede: Add driver callbacks for eeprom module query.Sudarsana Reddy Kalluru1-0/+88
This patch implements the ethtool callbacks for querying sfp/eeprom module. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-13xdp: don't make drivers report attachment modeJakub Kicinski1-1/+0
prog_attached of struct netdev_bpf should have been superseded by simply setting prog_id long time ago, but we kept it around to allow offloading drivers to communicate attachment mode (drv vs hw). Subsequently drivers were also allowed to report back attachment flags (prog_flags), and since nowadays only programs attached will XDP_FLAGS_HW_MODE can get offloaded, we can tell the attachment mode from the flags driver reports. Remove prog_attached member. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-07-02qede: Adverstise software timestamp caps when PHC is not available.Sudarsana Reddy Kalluru1-2/+8
When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode), get-tsinfo() callback should return the software timestamp capabilities instead of returning the error. Fixes: 4c55215c ("qede: Add driver support for PTP") Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: Use array_size() in vzalloc()Kees Cook1-2/+3
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-05-31qed*: Add link change count value to ethtool statistics display.Sudarsana Reddy Kalluru3-0/+4
This patch adds driver changes for capturing the link change count in ethtool statistics display. Please consider applying this to "net-next". Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qed*: Support drop action classificationManish Chopra4-0/+17
With this patch, User can configure for the supported flows to be dropped. Added a stat "gft_filter_drop" as well to be populated in ethtool for the dropped flows. For example - ethtool -N p5p1 flow-type udp4 dst-port 8000 action -1 ethtool -N p5p1 flow-type tcp4 scr-ip 192.168.8.1 action -1 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Support flow classification to the VFs.Manish Chopra1-4/+30
With the supported classification modes [4 tuples based, udp port based, src-ip based], flows can be classified to the VFs as well. With this patch, flows can be re-directed to the requested VF provided in "action" field of command. Please note that driver doesn't really care about the queue bits in "action" field for the VFs. Since queue will be still chosen by FW using RSS hash. [I.e., the classification would be done according to vport-only] For examples - ethtool -N p5p1 flow-type udp4 dst-port 8000 action 0x100000000 ethtool -N p5p1 flow-type tcp4 src-ip 192.16.6.10 action 0x200000000 ethtool -U p5p1 flow-type tcp4 src-ip 192.168.40.100 dst-ip \ 192.168.40.200 src-port 6660 dst-port 5550 \ action 0x100000000 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qed*: Support other classification modes.Manish Chopra1-2/+29
Currently, driver supports flow classification to PF receive queues based on TCP/UDP 4 tuples [src_ip, dst_ip, src_port, dst_port] only. This patch enables to configure different flow profiles [For example - only UDP dest port or src_ip based] on the adapter so that classification can be done according to just those fields as well. Although, at a time just one type of flow configuration is supported due to limited number of flow profiles available on the device. For example - ethtool -N enp7s0f0 flow-type udp4 dst-port 45762 action 2 ethtool -N enp7s0f0 flow-type tcp4 src-ip 192.16.4.10 action 1 ethtool -N enp7s0f0 flow-type udp6 dst-port 45762 action 3 Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Validate unsupported configurationsManish Chopra1-0/+73
Validate and prevent some of the configurations for unsupported [by firmware] inputs [for example - mac ext, vlans, masks/prefix, tos/tclass] via ethtool -N/-U. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25qede: Refactor ethtool rx classification flow.Manish Chopra1-182/+330
This patch simplifies the ethtool rx flow configuration [via ethtool -U/-N] flow code base by dividing it logically into various APIs based on given protocols. It also separates various validations and calculations done along the flow in their own APIs. Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22qede: Add support for populating ethernet TLVs.Sudarsana Reddy Kalluru1-0/+101
This patch adds callbacks for providing the ethernet protocol driver TLVs. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+1
S390 bpf_jit.S is removed in net-next and had changes in 'net', since that code isn't used any more take the removal. TLS data structures split the TX and RX components in 'net-next', put the new struct members from the bug fix in 'net' into the RX part. The 'net-next' tree had some reworking of how the ERSPAN code works in the GRE tunneling code, overlapping with a one-line headroom calculation fix in 'net'. Overlapping changes in __sock_map_ctx_update_elem(), keep the bits that read the prog members via READ_ONCE() into local variables before using them. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-17qede: Add build_skb() support.Manish Chopra4-174/+137
This patch makes use of build_skb() throughout in driver's receieve data path [HW gro flow and non HW gro flow]. With this, driver can build skb directly from the page segments which are already mapped to the hardware instead of allocating new SKB via netdev_alloc_skb() and memcpy the data which is quite costly. This really improves performance (keeping same or slight gain in rx throughput) in terms of CPU utilization which is significantly reduced [almost half] in non HW gro flow where for every incoming MTU sized packet driver had to allocate skb, memcpy headers etc. Additionally in that flow, it also gets rid of bunch of additional overheads [eth_get_headlen() etc.] to split headers and data in the skb. Tested with: system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores iperf [server]: iperf -s iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32 HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.59 0.00 32.93 0.00 0.00 43.07 0.00 0.00 23.42 HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.70 0.00 31.70 0.00 0.00 25.68 0.00 0.00 41.92 HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.86 0.00 24.14 0.00 0.00 6.59 0.00 0.00 68.41 HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle Average: all 0.87 0.00 23.75 0.00 0.00 6.19 0.00 0.00 69.19 Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-13qede: Fix ref-cnt usage countMichal Kalderon1-2/+1
Rebooting while qedr is loaded with a VLAN interface present results in unregister_netdevice waiting for the usage count to become free. The fix is that rdma devices should be removed before unregistering the netdevice, to assure all references to ndev are decreased. Fixes: cee9fbd8e2e9 ("qede: Add qedr framework") Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10qede: Fix gfp flags sent to rdma event node allocationMichal Kalderon1-1/+1
A previous commit 4609adc27175 ("qede: Fix qedr link update") added a flow that could allocate rdma event objects from an interrupt path (link notification). Therefore the kzalloc call should be done with GFP_ATOMIC. fixes: 4609adc27175 ("qede: Fix qedr link update") Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com> Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-07qed*: Refactor mf_mode to consist of bits.Sudarsana Reddy Kalluru1-2/+2
`mf_mode' field indicates the multi-partitioning mode the device is configured to. This method doesn't scale very well, adding a new MF mode requires going over all the existing conditions, and deciding whether those are needed for the new mode or not. The patch defines a set of bit-fields for modes which are derived according to the mode info shared by the MFW and all the configuration would be made according to those. To add a new mode, there would be a single place where we'll need to go and choose which bits apply and which don't. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20qed* : Add new TLV to request PF to update MAC in bulletin boardShahed Shaikh1-0/+4
There may be a need for VF driver to request PF to explicitly update its bulletin with a MAC address. e.g. When user assigns a MAC address to VF while VF is still down, and PF's bulletin board contains different MAC address, in this case, when VF's interface is brought up, it gets loaded with MAC address from bulletin board which is not desirable. To handle this corner case, we need a new TLV to request PF to update its bulletin board with suggested MAC. This request will be honored only for trusted VFs. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20qed* : use trust mode to allow VF to override forced MACShahed Shaikh1-2/+1
As per existing behavior, when PF sets a MAC address for a VF (also called as forced MAC), VF is not allowed to change its MAC address afterwards. This puts the limitation on few use cases such as bonding of VFs, where bonding driver asks VF to change its MAC address. This patch uses a VF trust mode to allow VF to change its MAC address in spite PF has set a forced MAC for that VF. Signed-off-by: Shahed Shaikh <shahed.shaikh@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-14/+6
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Do not drop rx-checksum invalidated packets.Manish Chopra1-8/+2
Today, driver drops received packets which are indicated as invalid checksum by the device. Instead of dropping such packets, pass them to the stack with CHECKSUM_NONE indication in skb. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29qede: Ethtool flash update support.Sudarsana Reddy Kalluru1-0/+9
The patch adds ethtool callback implementation for flash update. Signed-off-by: Sudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27qede: Fix barrier usage after tx doorbell write.Manish Chopra1-6/+4
Since commit c5ad119fb6c09b0297446be05bd66602fa564758 ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: Manish Chopra <manish.chopra@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21qede: fix spelling mistake: "registeration" -> "registration"Colin Ian King2-3/+3
Trivial fix to spelling mistakes in DP_ERR error message text and comments Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-16qede: Fix qedr link updateMichal Kalderon1-2/+2
Link updates were not reported to qedr correctly. Leading to cases where a link could be down, but qedr would see it as up. In addition, once qede was loaded, link state would be up, regardless of the actual link state. Signed-off-by: Michal Kalderon <michal.kalderon@cavium.com> Signed-off-by: Ariel Elior <ariel.elior@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller3-0/+13
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-01-07 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add a start of a framework for extending struct xdp_buff without having the overhead of populating every data at runtime. Idea is to have a new per-queue struct xdp_rxq_info that holds read mostly data (currently that is, queue number and a pointer to the corresponding netdev) which is set up during rxqueue config time. When a XDP program is invoked, struct xdp_buff holds a pointer to struct xdp_rxq_info that the BPF program can then walk. The user facing BPF program that uses struct xdp_md for context can use these members directly, and the verifier rewrites context access transparently by walking the xdp_rxq_info and net_device pointers to load the data, from Jesper. 2) Redo the reporting of offload device information to user space such that it works in combination with network namespaces. The latter is reported through a device/inode tuple as similarly done in other subsystems as well (e.g. perf) in order to identify the namespace. For this to work, ns_get_path() has been generalized such that the namespace can be retrieved not only from a specific task (perf case), but also from a callback where we deduce the netns (ns_common) from a netdevice. bpftool support using the new uapi info and extensive test cases for test_offload.py in BPF selftests have been added as well, from Jakub. 3) Add two bpftool improvements: i) properly report the bpftool version such that it corresponds to the version from the kernel source tree. So pick the right linux/version.h from the source tree instead of the installed one. ii) fix bpftool and also bpf_jit_disasm build with bintutils >= 2.9. The reason for the build breakage is that binutils library changed the function signature to select the disassembler. Given this is needed in multiple tools, add a proper feature detection to the tools/build/features infrastructure, from Roman. 4) Implement the BPF syscall command BPF_MAP_GET_NEXT_KEY for the stacktrace map. It is currently unimplemented, but there are use cases where user space needs to walk all stacktrace map entries e.g. for dumping or deleting map entries w/o having to close and recreate the map. Add BPF selftests along with it, from Yonghong. 5) Few follow-up cleanups for the bpftool cgroup code: i) rename the cgroup 'list' command into 'show' as we have it for other subcommands as well, ii) then alias the 'show' command such that 'list' is accepted which is also common practice in iproute2, and iii) remove couple of newlines from error messages using p_err(), from Jakub. 6) Two follow-up cleanups to sockmap code: i) remove the unused bpf_compute_data_end_sk_skb() function and ii) only build the sockmap infrastructure when CONFIG_INET is enabled since it's only aware of TCP sockets at this time, from John. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.