aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/qlogic/qlge (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-01-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: Documentation/networking/ip-sysctl.txt drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c Both conflicts were simply overlapping context. A build fix for qlcnic is in here too, simply removing the added devinit annotations which no longer exist. Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-11qlge: remove NETIF_F_TSO6 flagAmerigo Wang1-1/+1
It is werid that qlge driver supports NETIF_F_TSO6 but not NETIF_F_IPV6_CSUM. This also causes some kernel warning [1] when VLAN device setups on a qlge interface. I think the qlge hardware doesn't support NETIF_F_IPV6_CSUM, so we have to just remove the NETIF_F_TSO6 flag. After this patch, the TCP/IPv6 traffic becomes normal again, no kernel warnings any more. NOTE: I only tested it on 2.6.32 kernel, even if the upstream kernel could fix this automatically (it is hard to track NETIF* flags), removing it is also safe. 1. https://bugzilla.redhat.com/show_bug.cgi?id=891839 Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <amwang@redhat.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-01-08remove init of dev->perm_addr in driversJiri Pirko1-1/+0
perm_addr is initialized correctly in register_netdevice() so to init it in drivers is no longer needed. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07drivers/net: fix up function prototypes after __dev* removalsGreg Kroah-Hartman1-3/+3
The __dev* removal patches for the network drivers ended up messing up the function prototypes for a bunch of drivers. This patch fixes all of them back up to be properly aligned. Bonus is that this almost removes 100 lines of code, always a nice surprise. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03qlge: remove __dev* attributesBill Pemberton1-4/+4
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-06drivers: ethernet: qlogic: qlge_dbg.c: Fixed a coding style issueKumar Amit Mehta1-8/+8
checkpatch.pl throws error message for the current code. This patch fixes this coding style issue. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Jitendra Kalsaria <Jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-07netdev: make pci_error_handlers constStephen Hemminger1-1/+1
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2012-07-29qlge: Add offload features to vlan interfacesbrenohl@br.ibm.com1-0/+1
This patch fills the net_device vlan_features with the proper hardware features, thus, improving the vlan interface performance. With the patch applied, I can see around 148% improvement on a TCP_STREAM test, from 3.5 Gb/s to 8.7 Gb/s. On TCP_RR, I see a 11% improvement, from 18k to 20. The CPU utilization is almost the same on both cases, from the comparison above. Signed-off-by: Breno Leitao <brenohl@br.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18qlge: fix an "&&" vs "||" bugDan Carpenter1-1/+1
The condition is always true so WOL will never work. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11qlge: fix endian issueLi RongQing1-3/+3
commit 6d29b1ef introduces a bug, ntohs is __be16_to_cpu, not cpu_to_be16. We always use htons on IP_OFFSET and IP_MF, then compare with network package. Signed-off-by: Li RongQing <roy.qing.li@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Bumped driver version to 1.00.00.31Jitendra Kalsaria1-1/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Refactoring of ethtool stats.Jitendra Kalsaria1-138/+157
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Moving low level frame error to ethtool statistics.Jitendra Kalsaria3-27/+58
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fixed double pci free upon tx_ring->q allocation failure.Jitendra Kalsaria1-4/+6
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Added missing case statement to ethtool get_strings.Jitendra Kalsaria1-0/+5
Missing case was causing ethtool self test to print garbage value in extra info section. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Clean up ethtool set WOL routine.Jitendra Kalsaria1-9/+0
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fix ethtool WOL calls to operate only on devices that support WOL.Jitendra Kalsaria2-4/+18
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Cleanup atomic queue threshold check.Jitendra Kalsaria2-5/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: Fix TX queue stoppage due to full condition.Jitendra Kalsaria1-1/+11
TX queue was being stopped at beginning of send path instead of at the end when last descriptor is used. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10qlge: remove unnecessary setting of skb->devJon Mason1-2/+0
skb->dev is being unnecessarily set by the driver on packet recieve. eth_type_trans already sets skb->dev to the proper value and it is not referenced anywhere else in the dirver, thus making its setting unnecessary. Signed-off-by: Jon Mason <jdmason@kudzu.us> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-05qlge: set maximal number of default RSS queuesYuval Mintz1-1/+1
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-14net: Fix spelling typo in netMasanari Iida1-1/+1
Correct spelling typo within drivers/net. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Bumped driver version to 1.00.00.30.Jitendra Kalsaria1-1/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fix memory leak in the process of refillJitendra Kalsaria1-3/+5
Driver was leaking memory when page allocation failures occurs. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Removing needless print's which are notJitendra Kalsaria1-70/+1
Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-04qlge: Fixed invalid reference to ip headerJitendra Kalsaria1-3/+4
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-31drivers/net: Remove unnecessary k.alloc/v.alloc OOM messagesJoe Perches1-3/+1
alloc failures use dump_stack so emitting an additional out-of-memory message is an unnecessary duplication. Remove the allocation failure messages. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-08net: make vlan ndo_vlan_rx_[add/kill]_vid return error valueJiri Pirko1-14/+24
Let caller know the result of adding/removing vlan id to/from vlan filter. In some drivers I make those functions to just return 0. But in those where there is able to see if hw setup went correctly, return value is set appropriately. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-5/+3
Conflicts: net/ipv4/inet_diag.c
2011-11-23qlge: fix size of external list for TX address descriptorsThadeu Lima de Souza Cascardo1-5/+3
When transmiting a fragmented skb, qlge fills a descriptor with the fragment addresses, after DMA-mapping them. If there are more than eight fragments, it will use the eighth descriptor as a pointer to an external list. After mapping this external list, called OAL to a structure containing more descriptors, it fills it with the extra fragments. However, considering that systems with pages larger than 8KiB would have less than 8 fragments, which was true before commit a715dea3c8e, it defined a macro for the OAL size as 0 in those cases. Now, if a skb with more than 8 fragments (counting skb->data as one fragment), this would start overwriting the list of addresses already mapped and would make the driver fail to properly unmap the right addresses on architectures with pages larger than 8KiB. Besides that, the list of mappings was one size too small, since it must have a mapping for the maxinum number of skb fragments plus one for skb->data and another for the OAL. So, even on architectures with page sizes 4KiB and 8KiB, a skb with the maximum number of fragments would make the driver overwrite its counter for the number of mappings, which, again, would make it fail to unmap the mapped DMA addresses. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-16net: introduce and use netdev_features_t for device features setsMichał Mirosław1-4/+6
v2: add couple missing conversions in drivers split unexporting netdev_fix_features() implemented %pNF convert sock::sk_route_(no?)caps Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-08sweep the floors and convert some .get_drvinfo routines to strlcpyRick Jones1-4/+7
Per the mention made by Ben Hutchings that strlcpy is now the preferred string copy routine for a .get_drvinfo routine, do a bit of floor sweeping and convert some of the as-yet unconverted ethernet drivers to it. Signed-off-by: Rick Jones <rick.jones2@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19net: add skb frag size accessorsEric Dumazet1-3/+3
To ease skb->truesize sanitization, its better to be able to localize all references to skb frags size. Define accessors : skb_frag_size() to fetch frag size, and skb_frag_size_{set|add|sub}() to manipulate it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-06net: use DMA_x_DEVICE and dma_mapping_error with skb_frag_dma_mapIan Campbell1-2/+2
When I converted some drivers from pci_map_page to skb_frag_dma_map I neglected to convert PCI_DMA_xDEVICE into DMA_x_DEVICE and pci_dma_mapping_error into dma_mapping_error. Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-15qlge: convert to SKB paged frag API.Ian Campbell1-12/+6
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-17net: remove use of ndo_set_multicast_list in driversJiri Pirko1-1/+1
replace it by ndo_set_rx_mode Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-10qlogic: Move the QLogic driversJeff Kirsher6-0/+11344
Moves the QLogic drivers into drivers/net/ethernet/qlogic/ and the necessary Kconfig and Makefile changes. CC: Ron Mercer <ron.mercer@qlogic.com> CC: Amit Kumar Salecha <amit.salecha@qlogic.com> CC: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.