aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/realtek (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-01-11r8169: improve handling D3 PLL power-downHeiner Kallweit1-29/+22
Realtek provided a description of bits 6 and 7 in register PMCH. They configure whether the chip powers down certain PLL in D3hot and D3cold respectively. They do not actually power down the PLL. Reflect this in the code and configure D3 PLL powerdown based on whether WOL is enabled. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: enable PLL power-down for chip versions 34, 35, 36, 42Heiner Kallweit1-7/+4
There's no known reason why PLL powerdown on D3 shouldn't be enabled on chip versions 34, 35, 36, and 42. At least the vendor driver doesn't exclude any of these chip versions. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: make use of the unaligned access helpersHeiner Kallweit1-22/+13
Instead of open-coding unaligned access let's use the predefined unaligned access helpers. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/cfaf9176-e4f9-c32d-4d4d-e8fb52009f35@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: tweak max read request size for newer chips also in jumbo mtu modeHeiner Kallweit1-4/+5
So far we don't increase the max read request size if we switch to jumbo mode before bringing up the interface for the first time. Let's change this. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: align RTL8168e jumbo pcie read request size with vendor driverHeiner Kallweit1-4/+2
Align behavior with r8168 vendor driver and don't reduce max read request size for RTL8168e in jumbo mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-11r8169: deprecate support for RTL_GIGA_MAC_VER_27Heiner Kallweit1-2/+6
RTL8168dp is ancient anyway, and I haven't seen any trace of its early version 27 yet. This chip versions needs quite some special handling, therefore it would facilitate driver maintenance if support for it could be dropped. For now just disable detection of this chip version. If nobody complains we can remove support for it in the near future. v2: - extend unknown chip version error message Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/ca98f018-a0e1-8762-e95c-f0ad773a0271@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: don't wakeup-enable device on shutdown if WOL is disabledHeiner Kallweit1-1/+1
If WOL isn't enabled, then there's no need to enable wakeup from D3 on system shutdown. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: improve rtl_ocp_reg_failureHeiner Kallweit1-11/+6
Use WARN_ONCE here to get a call trace in case of a problem. This facilitates finding the offending code part. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-09r8169: replace BUG_ON with WARN in _rtl_eri_writeHeiner Kallweit1-1/+3
Use WARN here to avoid stopping the system. In addition print the addr and mask values that triggered the warning. v2: - return on WARN to avoid an invalid register write Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07r8169: improve RTL8168g PHY suspend quirkHeiner Kallweit1-26/+26
According to Realtek the ERI register 0x1a8 quirk is needed to work around a hw issue with the PHY on RTL8168g. The register needs to be changed before powering down the PHY. Currently we don't meet this requirement, however I'm not aware of any problems caused by this. Therefore I see the change as an improvement. The PHY driver has no means to access the chip ERI registers, therefore we have to intercept MDIO writes to BMCR register. If the BMCR_PDOWN bit is going to be set, then let's apply the quirk before actually powering down the PHY. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07r8169: move ERI access functions to avoid forward declarationHeiner Kallweit1-64/+64
No functional change here. We just move a code block to avoid a function forward declaration in a subsequent change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04r8169: work around power-saving bug on some chip versionsHeiner Kallweit1-2/+4
A user reported failing network with RTL8168dp (a quite rare chip version). Realtek confirmed that few chip versions suffer from a PLL power-down hw bug. Fixes: 07df5bd874f0 ("r8169: power down chip in probe") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a1c39460-d533-7f9e-fa9d-2b8990b02426@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-05r8169: make NUM_RX_DESC a signed intHeiner Kallweit1-3/+3
After recent changes there's no need any longer to define NUM_RX_DESC as an unsigned value. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-05r8169: improve rtl_rxHeiner Kallweit1-10/+5
There's no need to check min(budget, NUM_RX_DESC). At first budget (NAPI_POLL_WEIGHT = 64) is less then NUM_RX_DESC (256). And more important: Even in case of budget > NUM_RX_DESC we could safely continue processing descriptors as long as they are owned by the CPU. In addition replace rx_left with a normal counter variable, this allows to simplify the code. Last but not least there's no need any longer to pass the budget as an u32. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-12-01r8169: set tc_offset only if tally counter reset isn't supportedHeiner Kallweit1-16/+9
On chip versions supporting tally counter reset we currently update the counters after a reset although we know all counters are zero. Skip this unnecessary step. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/526618b2-b1bf-1844-b82a-dab2df7bdc8f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20r8169: use dev_err_probe in rtl_get_ether_clkHeiner Kallweit1-2/+2
Tiny improvement, let dev_err_probe() deal with EPROBE_DEFER. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b0c4ebcf-2047-e933-b890-8a20e4bdb19f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-20r8169: reduce number of workaround doorbell ringsHeiner Kallweit1-2/+5
Some chip versions have a hw bug resulting in lost door bell rings. To work around this the doorbell is also rung whenever we still have tx descriptors in flight after having cleaned up tx descriptors. These PCI(e) writes come at a cost, therefore let's reduce the number of extra doorbell rings. If skb is NULL then this means: - last cleaned-up descriptor belongs to a skb with at least one fragment and last fragment isn't marked as sent yet - hw is in progress sending the skb, therefore no extra doorbell ring is needed for this skb - once last fragment is marked as transmitted hw will trigger a tx done interrupt and we come here again (with skb != NULL) and ring the doorbell if needed Therefore skip the workaround doorbell ring if skb is NULL. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/0a15a83c-aecf-ab51-8071-b29d9dcd529a@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-18r8169: remove not needed check in rtl8169_start_xmitHeiner Kallweit1-5/+2
In rtl_tx() the released descriptors are zero'ed by rtl8169_unmap_tx_skb(). And in the beginning of rtl8169_start_xmit() we check that enough descriptors are free, therefore there's no way the DescOwn bit can be set here. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6965d665-6c50-90c5-70e6-0bb335d4ea47@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-17r8169: remove nr_frags argument from rtl_tx_slots_availHeiner Kallweit1-9/+6
The only time when nr_frags isn't SKB_MAX_FRAGS is when entering rtl8169_start_xmit(). However we can use SKB_MAX_FRAGS also here because when queue isn't stopped there should always be room for MAX_SKB_FRAGS + 1 descriptors. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/3d1f2ad7-31d5-2cac-4f4a-394f8a3cab63@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-16r8169: improve rtl8169_start_xmitHeiner Kallweit1-9/+6
Improve the following in rtl8169_start_xmit: - tp->cur_tx can be accessed in parallel by rtl_tx(), therefore annotate the race by using WRITE_ONCE - avoid checking stop_queue a second time by moving the doorbell check - netif_stop_queue() uses atomic operation set_bit() that includes a full memory barrier on some platforms, therefore use smp_mb__after_atomic to avoid overhead Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/80085451-3eaf-507a-c7c0-08d607c46fbc@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13r8169: improve rtl_txHeiner Kallweit1-4/+3
We can simplify the for() condition and eliminate variable tx_left. The change also considers that tp->cur_tx may be incremented by a racing rtl8169_start_xmit(). In addition replace the write to tp->dirty_tx and the following smp_mb() with an equivalent call to smp_store_mb(). This implicitly adds a WRITE_ONCE() to the write. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/c2e19e5e-3d3f-d663-af32-13c3374f5def@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-13r8169: use READ_ONCE in rtl_tx_slots_availHeiner Kallweit1-1/+2
tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure that the compiler doesn't use cached values. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/5676fee3-f6b4-84f2-eba5-c64949a371ad@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12Merge https://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-13/+5
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07r8169: disable hw csum for short packets on all chip versionsHeiner Kallweit1-12/+3
RTL8125B has same or similar short packet hw padding bug as RTL8168evl. The main workaround has been extended accordingly, however we have to disable also hw checksumming for short packets on affected new chip versions. Instead of checking for an affected chip version let's simply disable hw checksumming for short packets in general. v2: - remove the version checks and disable short packet hw csum in general - reflect this in commit title and message Fixes: 0439297be951 ("r8169: add support for RTL8125B") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/7fbb35f0-e244-ef65-aa55-3872d7d38698@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-07r8169: fix potential skb double free in an error pathHeiner Kallweit1-1/+2
The caller of rtl8169_tso_csum_v2() frees the skb if false is returned. eth_skb_pad() internally frees the skb on error what would result in a double free. Therefore use __skb_put_padto() directly and instruct it to not free the skb on error. Fixes: b423e9ae49d7 ("r8169: fix offloaded tx checksum for small packets.") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/f7e68191-acff-9ded-4263-c016428a8762@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+11
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-04r8169: work around short packet hw bug on RTL8125Heiner Kallweit1-3/+11
Network problems with RTL8125B have been reported [0] and with help from Realtek it turned out that this chip version has a hw problem with short packets (similar to RTL8168evl). Having said that activate the same workaround as for RTL8168evl. Realtek suggested to activate the workaround for RTL8125A too, even though they're not 100% sure yet which RTL8125 versions are affected. [0] https://bugzilla.kernel.org/show_bug.cgi?id=209839 Fixes: 0439297be951 ("r8169: add support for RTL8125B") Reported-by: Maxim Plotnikov <wgh@torlan.ru> Tested-by: Maxim Plotnikov <wgh@torlan.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/8002c31a-60b9-58f1-f0dd-8fd07239917f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03r8169: set IRQF_NO_THREAD if MSI(X) is enabledHeiner Kallweit1-1/+3
We had to remove flag IRQF_NO_THREAD because it conflicts with shared interrupts in case legacy interrupts are used. Following up on the linked discussion set IRQF_NO_THREAD if MSI or MSI-X is used, because both guarantee that interrupt won't be shared. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://www.spinics.net/lists/netdev/msg695341.html Link: https://lore.kernel.org/r/446cf5b8-dddd-197f-cb96-66783141ade4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-03r8169: align number of tx descriptors with vendor driverHeiner Kallweit1-1/+1
Lowest number of tx descriptors used in the vendor drivers is 256 in r8169. r8101/r8168/r8125 use 1024 what seems to be the hw limit. Stay on the safe side and go with 256, same as number of rx descriptors. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/a52a6de4-f792-5038-ae2f-240d3b7860eb@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31r8169: use pm_runtime_put_sync in rtl_open error pathHeiner Kallweit1-5/+3
We can safely runtime-suspend the chip if rtl_open() fails. Therefore switch the error path to use pm_runtime_put_sync() as well. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/aa093b1e-f295-5700-1cb7-954b54dd8f17@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31r8169: remove unneeded memory barrier in rtl_txHeiner Kallweit1-2/+1
tp->dirty_tx isn't changed outside rtl_tx(). Therefore I see no need to guarantee a specific order of reading tp->dirty_tx and tp->cur_tx. Having said that we can remove the memory barrier. In addition use READ_ONCE() when reading tp->cur_tx because it can change in parallel to rtl_tx(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/2264563a-fa9e-11b0-2c42-31bc6b8e2790@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31r8169: remove no longer needed private rx/tx packet/byte countersHeiner Kallweit1-34/+0
After switching to the net core rx/tx byte/packet counters we can remove the now unused private version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-31r8169: use struct pcpu_sw_netstats for rx/tx packet/byte countersHeiner Kallweit1-3/+8
Switch to the net core rx/tx byte/packet counter infrastructure. This simplifies the code, only small drawback is some memory overhead because we use just one queue, but allocate the counters per cpu. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-29r8169: fix issue with forced threading in combination with shared interruptsHeiner Kallweit1-2/+2
As reported by Serge flag IRQF_NO_THREAD causes an error if the interrupt is actually shared and the other driver(s) don't have this flag set. This situation can occur if a PCI(e) legacy interrupt is used in combination with forced threading. There's no good way to deal with this properly, therefore we have to remove flag IRQF_NO_THREAD. For fixing the original forced threading issue switch to napi_schedule(). Fixes: 424a646e072a ("r8169: fix operation under forced interrupt threading") Link: https://www.spinics.net/lists/netdev/msg694960.html Reported-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Tested-by: Serge Belyshev <belyshev@depni.sinp.msu.ru> Link: https://lore.kernel.org/r/b5b53bfe-35ac-3768-85bf-74d1290cf394@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-19r8169: fix operation under forced interrupt threadingHeiner Kallweit1-4/+4
For several network drivers it was reported that using __napi_schedule_irqoff() is unsafe with forced threading. One way to fix this is switching back to __napi_schedule, but then we lose the benefit of the irqoff version in general. As stated by Eric it doesn't make sense to make the minimal hard irq handlers in drivers using NAPI a thread. Therefore ensure that the hard irq handler is never thread-ified. Fixes: 9a899a35b0d6 ("r8169: switch to napi_schedule_irqoff") Link: https://lkml.org/lkml/2020/10/18/19 Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/4d3ef84a-c812-5072-918a-22a6f6468310@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-10r8169: factor out handling rtl8169_statsHeiner Kallweit1-21/+25
Factor out handling the private packet/byte counters to new functions rtl_get_priv_stats() and rtl_inc_priv_stats(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+7
Small conflict around locking in rxrpc_process_event() - channel_lock moved to bundle in next, while state lock needs _bh() from net. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-08r8169: consider that PHY reset may still be in progress after applying firmwareHeiner Kallweit1-0/+7
Some firmware files trigger a PHY soft reset and don't wait for it to be finished. PHY register writes directly after applying the firmware may fail or provide unexpected results therefore. Fix this by waiting for bit BMCR_RESET to be cleared after applying firmware. There's nothing wrong with the referenced change, it's just that the fix will apply cleanly only after this change. Fixes: 89fbd26cca7e ("r8169: fix firmware not resetting tp->ocp_base") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-14/+24
Rejecting non-native endian BTF overlapped with the addition of support for it. The rest were more simple overlapping changes, except the renesas ravb binding update, which had to follow a file move as well as a YAML conversion. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01r8169: fix data corruption issue on RTL8402Heiner Kallweit1-0/+4
Petr reported that after resume from suspend RTL8402 partially truncates incoming packets, and re-initializing register RxConfig before the actual chip re-initialization sequence is needed to avoid the issue. Reported-by: Petr Tesarik <ptesarik@suse.cz> Proposed-by: Petr Tesarik <ptesarik@suse.cz> Tested-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-10-01r8169: fix handling ether_clkHeiner Kallweit1-13/+19
Petr reported that system freezes on r8169 driver load on a system using ether_clk. The original change was done under the assumption that the clock isn't needed for basic operations like chip register access. But obviously that was wrong. Therefore effectively revert the original change, and in addition leave the clock active when suspending and WoL is enabled. Chip may not be able to process incoming packets otherwise. Fixes: 9f0b54cd1672 ("r8169: move switching optional clock on/off to pll power functions") Reported-by: Petr Tesarik <ptesarik@suse.cz> Tested-by: Petr Tesarik <ptesarik@suse.cz> Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-27r8169: fix RTL8168f/RTL8411 EPHY configHeiner Kallweit1-2/+2
Mistakenly bit 2 was set instead of bit 3 as in the vendor driver. Fixes: a7a92cf81589 ("r8169: sync PCIe PHY init with vendor driver 8.047.01") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-23net: realtek: Remove set but not used variableZheng Yongjun1-2/+2
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/realtek/8139cp.c: In function cp_tx_timeout: drivers/net/ethernet/realtek/8139cp.c:1242:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] `rc` is never used, so remove it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-198139too: use true,false for bool variablesJason Yan1-1/+1
This addresses the following coccinelle warning: drivers/net/ethernet/realtek/8139too.c:981:2-8: WARNING: Assignment of 0/1 to bool variable Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-23treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-19r8169: remove member irq_enabled from struct rtl8169_privateHeiner Kallweit1-5/+1
After making use of the gro_flush_timeout attribute I once got a tx timeout due to an interrupt that wasn't handled. Seems using irq_enabled can be racy, and it's not needed any longer anyway, so remove it. I've never seen a report about such a race before, therefore treat the change as an improvement. There's just one small drawback: If a legacy PCI interrupt is used, and if this interrupt is shared with a device with high interrupt rate, then we may handle interrupts even if NAPI disabled them, and we may see a certain performance decrease under high network load. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-19r8169: use napi_complete_done return valueHeiner Kallweit1-3/+1
Consider the return value of napi_complete_done(), this allows users to use the gro_flush_timeout sysfs attribute as an alternative to classic interrupt coalescing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21r8169: allow to enable ASPM on RTL8125AHeiner Kallweit1-0/+2
For most chip versions this has been added already. Allow also for RTL8125A to enable ASPM. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-14r8169: add support for RTL8125BHeiner Kallweit3-23/+141
Add support for RTL8125B rev.b. In my tests 2.5Gbps worked well w/o firmware, however for a stable link at 1Gbps firmware revision 0.0.2 is needed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.