aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/renesas (follow)
AgeCommit message (Collapse)AuthorFilesLines
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-4/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-09sh_eth: Use dev_err_probe() helperGeert Uytterhoeven1-2/+1
Use the dev_err_probe() helper, instead of open-coding the same operation. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/2576cc15bdbb5be636640f491bcc087a334e2c02.1638959463.git.geert+renesas@glider.be Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen2-4/+12
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19ethernet: renesas: Use div64_ul instead of do_divYang Li1-4/+2
do_div() does a 64-by-32 division. Here the divisor is an unsigned long which on some platforms is 64 bit wide. So use div64_ul instead of do_div to avoid a possible truncation. Eliminate the following coccicheck warning: ./drivers/net/ethernet/renesas/ravb_main.c:2492:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/1637228883-100100-1-git-send-email-yang.lee@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-19ethernet: renesas: use eth_hw_addr_set()Jakub Kicinski2-14/+18
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address up into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-13ravb: Fix typo AVB->DMACBiju Das1-1/+1
Fix the typo AVB->DMAC in comment, as the code following the comment is for DMAC on Gigabit Ethernet IP. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Update ravb_emac_init_gbeth()Biju Das2-2/+9
This patch enables Receive/Transmit port of TOE and removes the setting of promiscuous bit from EMAC configuration mode register. This patch also update EMAC configuration mode comment from "PAUSE prohibition" to "EMAC Mode: PAUSE prohibition; Duplex; TX; RX; CRC Pass Through". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Document PFRI register bitBiju Das1-1/+1
Document PFRI register bit, as it is documented on R-Car Gen3 and RZ/G2L hardware manuals. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "nc_queue" feature bitBiju Das2-19/+19
Rename the feature bit "nc_queue" with "nc_queues" as AVB DMAC has RX and TX NC queues. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Optimize ravb_emac_init_gbeth functionBiju Das1-2/+1
Optimize CXR31 register initialization on ravb_emac_init_gbeth function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Rename "tsrq" variableBiju Das2-5/+5
Rename the variable "tsrq" with "tccr_mask" as we are passing TCCR mask to the ravb_wait() function. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add support to retrieve stats for GbEthernetBiju Das1-0/+21
Add support for retrieving stats information for GbEthernet. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add carrier_counters to struct ravb_hw_infoBiju Das2-0/+11
RZ/G2L E-MAC supports carrier counters. Add a carrier_counter hw feature bit to struct ravb_hw_info to add this feature only for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_gbeth() stubBiju Das2-5/+142
Fillup ravb_rx_gbeth() function to support RZ/G2L. This patch also renames ravb_rcar_rx to ravb_rx_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_format_gbeth() stubBiju Das2-4/+31
Fillup ravb_rx_ring_format_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_format to ravb_rx_ring_format_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_rx_ring_free_gbeth() stubBiju Das1-4/+24
Fillup ravb_rx_ring_free_gbeth() function to support RZ/G2L. This patch also renames ravb_rx_ring_free to ravb_rx_ring_free_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Fillup ravb_alloc_rx_desc_gbeth() stubBiju Das2-7/+24
Fillup ravb_alloc_rx_desc_gbeth() function to support RZ/G2L. This patch also renames ravb_alloc_rx_desc to ravb_alloc_rx_desc_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Add rx_max_buf_size to struct ravb_hw_infoBiju Das2-1/+5
R-Car AVB-DMAC has maximum 2K size on RX buffer, whereas on RZ/G2L it is 8K. We need to allow for changing the MTU within the limit of the maximum size of a descriptor. Add a rx_max_buf_size variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-13ravb: Use ALIGN macro for max_rx_lenBiju Das1-1/+1
Use ALIGN macro for calculating the value for max_rx_len. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-07ethernet: use of_get_ethdev_address()Jakub Kicinski1-1/+1
Use the new of_get_ethdev_address() helper for the cases where dev->dev_addr is passed in directly as the destination. @@ expression dev, np; @@ - of_get_mac_address(np, dev->dev_addr) + of_get_ethdev_address(np, dev) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski1-1/+1
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Initialize GbEthernet E-MACBiju Das2-13/+62
Initialize GbEthernet E-MAC found on RZ/G2L SoC. This patch also renames ravb_set_rate to ravb_set_rate_rcar and ravb_rcar_emac_init to ravb_emac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add half_duplex to struct ravb_hw_infoBiju Das2-8/+31
RZ/G2L supports half duplex mode. Add a half_duplex hw feature bit to struct ravb_hw_info for supporting half duplex mode for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add magic_pkt to struct ravb_hw_infoBiju Das2-1/+5
E-MAC on R-Car supports magic packet detection, whereas RZ/G2L does not support this feature. Add magic_pkt to struct ravb_hw_info and enable this feature only for R-Car. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add tsrq to struct ravb_hw_infoBiju Das2-2/+8
R-Car AVB-DMAC has 4 Transmit start request queues, whereas RZ/G2L has only 1 Transmit start request queue. Add a tsrq variable to struct ravb_hw_info to handle this difference. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Exclude gPTP feature support for RZ/G2LBiju Das1-36/+49
R-Car supports gPTP feature whereas RZ/G2L does not support it. This patch excludes gtp feature support for RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Initialize GbEthernet DMACBiju Das2-2/+31
Initialize GbEthernet DMAC found on RZ/G2L SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add support for RZ/G2L SoCBiju Das2-0/+64
RZ/G2L SoC has Gigabit Ethernet IP consisting of Ethernet controller (E-MAC), Internal TCP/IP Offload Engine (TOE) and Dedicated Direct memory access controller (DMAC). This patch adds compatible string for RZ/G2L and fills up the ravb_hw_info struct. Function stubs are added which will be used by gbeth_hw_info and will be filled incrementally. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Add nc_queue to struct ravb_hw_infoBiju Das2-49/+94
R-Car supports network control queue whereas RZ/G2L does not support it. Add nc_queue to struct ravb_hw_info, so that NC queue is handled only by R-Car. This patch also renames ravb_rcar_dmac_init to ravb_dmac_init_rcar to be consistent with the naming convention used in sh_eth driver. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "no_ptp_cfg_active" and "ptp_cfg_active" variablesBiju Das2-15/+15
Rename the variable "no_ptp_cfg_active" with "gptp" and "ptp_cfg_active" with "ccc_gac" to match the HW features. There is no functional change. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ravb: Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar"Biju Das2-6/+6
Rename "ravb_set_features_rx_csum" function to "ravb_set_features_rcar" and replace the function pointer "set_rx_csum_feature" with "set_feature". Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07net: renesas: sh_eth: Fix freeing wrong tx descriptorYoshihiro Shimoda1-0/+1
The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Add reset supportBiju Das2-0/+12
Reset support is present on R-Car. Let's support it, if it is available. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_emac_init functionBiju Das2-2/+13
The E-MAC IP on the R-Car AVB module has different initialization parameters for RX frame size, duplex settings, different offset for transfer speed setting and has magic packet detection support compared to E-MAC on RZ/G2L Gigabit Ethernet module. Factorise the ravb_emac_init function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_dmac_init functionBiju Das2-21/+32
The DMAC IP on the R-Car AVB module has different initialization parameters for RCR, TGC, TCCR, RIC0, RIC2, and TIC compared to DMAC IP on the RZ/G2L Gigabit Ethernet module. Factorise the ravb_dmac_init function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_set_featuresBiju Das2-2/+14
RZ/G2L supports HW checksum on RX and TX whereas R-Car supports on RX. Factorise ravb_set_features to support this feature. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_adjust_link functionBiju Das2-1/+5
R-Car supports 100 and 1000 Mbps transfer speed whereas RZ/G2L in addition support 10Mbps. Factorise ravb_adjust_link function in order to support 10Mbps speed. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_rx functionBiju Das2-2/+13
R-Car uses an extended descriptor in RX whereas, RZ/G2L uses normal descriptor in RX. Factorise the ravb_rx function to support the later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_init functionBiju Das2-5/+17
The ravb_ring_init function uses an extended descriptor in RX for R-Car and normal descriptor for RZ/G2L. Add a helper function for RX ring buffer allocation to support later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_format functionBiju Das2-12/+24
The ravb_ring_format function uses an extended descriptor in RX for R-Car compared to the normal descriptor for RZ/G2L. Factorise RX ring buffer buildup to extend the support for later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Factorise ravb_ring_free functionBiju Das2-17/+31
R-Car uses extended descriptor in RX, whereas RZ/G2L uses normal descriptor. Factorise ravb_ring_free function so that it can support later SoC. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Add ptp_cfg_active to struct ravb_hw_infoBiju Das2-14/+6
There are some H/W differences for the gPTP feature between R-Car Gen3, R-Car Gen2, and RZ/G2L as below. 1) On R-Car Gen3, gPTP support is active in config mode. 2) On R-Car Gen2, gPTP support is not active in config mode. 3) RZ/G2L does not support the gPTP feature. Add a ptp_cfg_active hw feature bit to struct ravb_hw_info for supporting gPTP active in config mode for R-Car Gen3. This patch also removes enum ravb_chip_id, chip_id from both struct ravb_hw_info and struct ravb_private, as it is unused. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Add no_ptp_cfg_active to struct ravb_hw_infoBiju Das2-8/+13
There are some H/W differences for the gPTP feature between R-Car Gen3, R-Car Gen2, and RZ/G2L as below. 1) On R-Car Gen2, gPTP support is not active in config mode. 2) On R-Car Gen3, gPTP support is active in config mode. 3) RZ/G2L does not support the gPTP feature. Add a no_ptp_cfg_active hw feature bit to struct ravb_hw_info for handling gPTP for R-Car Gen2. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Add multi_irq to struct ravb_hw_infoBiju Das3-11/+20
R-Car Gen3 supports separate interrupts for E-MAC and DMA queues, whereas R-Car Gen2 and RZ/G2L have a single interrupt instead. Add a multi_irq hw feature bit to struct ravb_hw_info to enable this only for R-Car Gen3. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-25ravb: Remove the macros NUM_TX_DESC_GEN[23]Biju Das2-6/+6
For addressing 4 bytes alignment restriction on transmission buffer for R-Car Gen2 we use 2 descriptors whereas it is a single descriptor for other cases. Replace the macros NUM_TX_DESC_GEN[23] with magic number and add a comment to explain it. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add tx_counters to struct ravb_hw_infoBiju Das2-1/+4
The register for retrieving TX counters is present only on R-Car Gen3 and RZ/G2L; it is not present on R-Car Gen2. Add the tx_counters hw feature bit to struct ravb_hw_info, to enable this feature specifically for R-Car Gen3 now and later extend it to RZ/G2L. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add internal delay hw feature to struct ravb_hw_infoBiju Das2-2/+7
R-Car Gen3 supports TX and RX clock internal delay modes, whereas R-Car Gen2 and RZ/G2L do not support it. Add an internal_delay hw feature bit to struct ravb_hw_info to enable this only for R-Car Gen3. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add net_features and net_hw_features to struct ravb_hw_infoBiju Das2-4/+10
On R-Car the checksum calculation on RX frames is done by the E-MAC module, whereas on RZ/G2L it is done by the TOE. TOE calculates the checksum of received frames from E-MAC and outputs it to DMAC. TOE also calculates the checksum of transmission frames from DMAC and outputs it E-MAC. Add net_features and net_hw_features to struct ravb_hw_info, to support subsequent SoCs without any code changes in the ravb_probe function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add gstrings_stats and gstrings_size to struct ravb_hw_infoBiju Das2-1/+10
The device stats strings for R-Car and RZ/G2L are different. R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of "rx_queue_0_missed_errors". Add structure variables gstrings_stats and gstrings_size to struct ravb_hw_info, so that subsequent SoCs can be added without any code changes in the ravb_get_strings function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-19ravb: Add stats_len to struct ravb_hw_infoBiju Das2-3/+7
R-Car provides 30 device stats, whereas RZ/G2L provides only 15. In addition, RZ/G2L has stats "rx_queue_0_csum_offload_errors" instead of "rx_queue_0_missed_errors". Replace RAVB_STATS_LEN macro with a structure variable stats_len to struct ravb_hw_info, to support subsequent SoCs without any code changes to the ravb_get_sset_count function. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.