aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/rocker/rocker.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-06-23switchdev; add VLAN support for port's bridge_getlinkScott Feldman1-0/+25
One more missing piece of the puzzle. Add vlan dump support to switchdev port's bridge_getlink. iproute2 "bridge vlan show" cmd already knows how to show the vlans installed on the bridge and the device , but (until now) no one implemented the port vlan part of the netlink PF_BRIDGE:RTM_GETLINK msg. Before this patch, "bridge vlan show": $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlans 57 sw1p1 << device side vlans (missing) sw1p2 57 sw1p2 sw1p3 sw1p4 br0 None (When the port is bridged, the output repeats the vlan list for the vlans on the bridge side of the port and the vlans on the device side of the port. The listing above show no vlans for the device side even though they are installed). After this patch: $ bridge -c vlan show port vlan ids sw1p1 30-34 << bridge side vlan 57 sw1p1 30-34 << device side vlans 57 3840 PVID sw1p2 57 sw1p2 57 3840 PVID sw1p3 3842 PVID sw1p4 3843 PVID br0 None I re-used ndo_dflt_bridge_getlink to add vlan fill call-back func. switchdev support adds an obj dump for VLAN objects, using the same call-back scheme as FDB dump. Support included for both compressed and un-compressed vlan dumps. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23switchdev: rename vlan vid_start to vid_beginScott Feldman1-2/+2
Use vid_begin/end to be consistent with BRIDGE_VLAN_INFO_RANGE_BEGIN/END. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15bridge: del external_learned fdbs from device on flush or ageoutScott Feldman1-1/+1
We need to delete from offload the device externally learnded fdbs when any one of these events happen: 1) Bridge ages out fdb. (When bridge is doing ageing vs. device doing ageing. If device is doing ageing, it would send SWITCHDEV_FDB_DEL directly). 2) STP state change flushes fdbs on port. 3) User uses sysfs interface to flush fdbs from bridge or bridge port: echo 1 >/sys/class/net/BR_DEV/bridge/flush echo 1 >/sys/class/net/BR_PORT/brport/flush 4) Offload driver send event SWITCHDEV_FDB_DEL to delete fdb entry. For rocker, we can now get called to delete fdb entry in wait and nowait contexts, so set NOWAIT flag when deleting fdb entry. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: move port stop to 'no wait' processingScott Feldman1-1/+2
rocker_port_stop can be called from atomic and non-atomic contexts. Since we can't test what context we're getting called in, do the processing as 'no wait', which will cover all cases. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: move MAC learn event back to 'no wait' processingScott Feldman1-37/+3
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: mark STP update as 'no wait' processingScott Feldman1-1/+2
We can get STP updates from the bridge driver in atomic and non-atomic contexts. Since we can't test what context we're getting called in, do the STP processing as 'no wait', which will cover all cases. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: mark neigh update event processing as 'no wait'Scott Feldman1-1/+2
Neigh update event handler runs in a context where we can't sleep, so mark processing in driver with ROCKER_OP_FLAG_NOWAIT. NOWAIT will use GFP_ATOMIC for allocations and will queue cmds to the device's cmd ring but will not wait (sleep) for cmd response back from device. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: revert back to support for nowait processesScott Feldman1-90/+112
One of the items removed from the rocker driver in the Spring Cleanup patch series was the ability to mark processing in the driver as "no wait" for those contexts where we cannot sleep. Turns out, we have "no wait" contexts where we want to program the device. So re-add the ROCKER_OP_FLAG_NOWAIT flag to mark such processes, and propagate flags to mem allocator and to the device cmd executor. With NOWAIT, mem allocs are GFP_ATOMIC and device cmds are queued to the device, but the driver will not wait (sleep) for the response back from the device. My bad for removing NOWAIT support in the first place; I thought we could swing non-sleep contexts to process context using a work queue, for example, but there is push-back to keep processing in original context. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: fix neigh tbl index increment raceScott Feldman1-2/+2
rocker->neigh_tbl_next_index is used to generate unique indices for neigh entries programmed into the device. The way new indices were generated was racy with the new prepare-commit transaction model. A simple fix here removes the race. The race was with two processes getting the same index, one process using prepare-commit, the other not: Proc A Proc B PREPARE phase get neigh_tbl_next_index NONE phase get neigh_tbl_next_index neigh_tbl_next_index++ COMMIT phase neigh_tbl_next_index++ Both A and B got the same index. The fix is to store and increment neigh_tbl_next_index in the PREPARE (or NONE) phase and use value in COMMIT phase: Proc A Proc B PREPARE phase get neigh_tbl_next_index neigh_tbl_next_index++ NONE phase get neigh_tbl_next_index neigh_tbl_next_index++ COMMIT phase // use value stashed in PREPARE phase Reported-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-15rocker: gaurd against NULL rocker_port when removing portsScott Feldman1-0/+2
The ports array is filled in as ports are probed, but if probing doesn't finish, we need to stop only those ports that where probed successfully. Check the ports array for NULL to skip un-probed ports when stopping. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: remove support for legacy VLAN ndo opsScott Feldman1-33/+1
Remove support for legacy ndo ops .ndo_vlan_rx_add_vid/.ndo_vlan_rx_kill_vid. Rocker will use bridge_setlink/dellink exclusively for VLAN add/del operations. The legacy ops are needed if using 8021q driver module to setup VLANs on the port. But an alternative exists in using bridge_setlink/delink to setup VLANs, which doesn't depend on 8021q module. So rocker will switch to the newer setlink/dellink ops. VLANs can added/delete from the port, regardless if port is bridged or not, using the bridge commands: bridge vlan [add|del] vid VID dev DEV self (Yes, I agree it's confusing to use the "bridge" command to set a VLAN on a non-bridged port). Using setlink/dellink over legacy ops let's us handle the stacked driver case automatically. It's built-in. setlink also pass additional flags (PVID, egress untagged) that aren't available with the legacy ops. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: install/remove router MAC for untagged VLAN when joining/leaving bridgeScott Feldman1-17/+25
When the port joins a bridge, the port's internal VLAN ID needs to change to the bridge's internal VLAN ID. Likewise, when leaving the bridge, the internal VLAN ID reverts back the port's original internal VLAN ID. (The internal VLAN ID is used by device to internally mark untagged pkts with some VLAN, which will eventually be removed on egress...think PVID). When the internal VLAN ID changes, we need to update the VLAN table entries and the router MAC entries for IP/IPv6 to reflect the new internal VLAN ID. This patch makes use of the common rocker_port_vlan_add/del functions to make sure the tables are updated for the current internal VLAN ID. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: install untagged VLAN (vid=0) support for each portScott Feldman1-3/+17
On port probe, install by default untagged VLAN support. This is equivalent to running the command: bridge vlan add vid 0 dev DEV self A user could, if they wanted, manaully removing untagged support from the port by running the command: bridge vlan del vid 0 dev DEV self But installing it by default on port initialization gives the normal expected behavior. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: cleanup vlan table on error adding vlanScott Feldman1-1/+6
Basic house keeping: If there is an error adding the router MAC for this vlan, removing the just installed VLAN table entry to leave device in same state as before failure. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: zero allocate ports arrayScott Feldman1-1/+1
When allocating the array of rocker port pointers, zero the array values so we can test for !NULL to see if port is allocated/registered. We'll need this later when installing untagged VLAN support for each port, during port probe. It's a long story, but to install a VLAN (vid=0 for untagged, in this case) on a port, we'll need to scan other ports to see if the VLAN group for that VLAN has been setup. To scan the other ports, we need to walk the port array. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-01rocker: remove rocker parameter from functions that have rocker_port parameterSimon Horman1-70/+45
The rocker (switch) of a rocker_port may be trivially obtained from the latter it seems cleaner not to pass the former to a function when the latter is being passed anyway. rocker_port_rx_proc() is omitted from this change as it is a hot path case. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25rocker: mark parameters and local variables as constSimon Horman1-200/+215
Mark parameters and local variables as const where possible. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25rocker: remove unused rocker_port parameter from rocker_port_kfreeSimon Horman1-29/+25
Remove unused rocker_port parameter from rocker_port_kfree. Also remove the rocker_port parameter from callers of rocker_port_kfree where the parameter it is now unused. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21rocker: make rocker_port_internal_vlan_id_{get, put}() non-transactionalSimon Horman1-14/+7
The motivation for this is that rocker_port_internal_vlan_id_{get,put} appear to only partially implement the transaction model: memory allocation and freeing is transactional, but hash and bitmap manipulation is not. The latter could be fixed, however, as it is not currently exercised due to trans always being SWITCHDEV_TRANS_NONE it seems cleaner to make rocker_port_internal_vlan_id_get non-transactional. This problem was introduced by c4f20321d968 ("rocker: support prepare-commit transaction model"). Found by inspection. I do not believe that this change should have any run-time effect. Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21rocker: do not make neighbour entry changes when preparing transactionsSimon Horman1-6/+13
rocker_port_ipv4_nh() and in turn rocker_port_ipv4_neigh() may be be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_obj_set() via fib_table_insert(). The first time that rocker_port_ipv4_nh() is called, with trans == SWITCHDEV_TRANS_PREPARE, _rocker_neigh_add() adds a new entry to the neigh table. And the second time rocker_port_ipv4_nh() is called, with trans == SWITCHDEV_TRANS_COMMIT, that entry is found. This causes rocker_port_ipv4_nh() to believe it is not adding an entry and thus it frees "entry", which is still present in rocker driver's neigh table. This problem does not appear to affect deletion as my analysis is that deletion is always performed with trans == SWITCHDEV_TRANS_NONE. For completeness _rocker_neigh_{add,del,prepare} are updated not to manipulate fib table entries if trans == SWITCHDEV_TRANS_PREPARE. Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Reported-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21rocker: do not modify fdb table in rocker_port_fdb() when preparing transactionsSimon Horman1-2/+4
rocker_port_fdb_flush() may be called be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via switchdev_port_obj_add(). Adding the new entry to the FDB table when trans == SWITCHDEV_TRANS_PREPARE may result in a memory leak because when trans == SWITCHDEV_TRANS_PREPARE rocker_flow_tbl_bridge() will allocate memory when called via rocker_port_fdb_learn(). However, when trans == SWITCHDEV_TRANS_COMMIT the presence of the FDB entry in the FDB table causes rocker_port_fdb() to set the ROCKER_OP_FLAG_REFRESH flag which results in rocker_port_fdb_learn() skipping the call to rocker_flow_tbl_bridge() which would free the memory allocated by it when trans == SWITCHDEV_TRANS_PREPARE. ip link add br0 type bridge ip link set up dev eth0 ip link set dev eth0 master br0 bridge fdb add 52:54:00:12:35:08 dev eth0 bridge fdb add 52:54:00:12:35:09 dev eth0 [ 2.600730] ------------[ cut here ]------------ [ 2.601002] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4369! [ 2.601373] invalid opcode: 0000 [#1] SMP [ 2.601963] Modules linked in: [ 2.602355] CPU: 0 PID: 64 Comm: bridge Not tainted 4.1.0-rc3-01048-g6d0f50c50211-dirty #1075 [ 2.602721] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014 [ 2.602721] task: ffff880019facef0 ti: ffff88001f96c000 task.ti: ffff88001f96c000 [ 2.602721] RIP: 0010:[<ffffffff811f1470>] [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160 [ 2.602721] RSP: 0018:ffff88001f96fa98 EFLAGS: 00000212 [ 2.602721] RAX: ffff880019d4fa68 RBX: ffff88001f96fb18 RCX: 0000000000000000 [ 2.602721] RDX: ffff880019d4f000 RSI: ffff88001f96fb18 RDI: ffff880019d4f000 [ 2.602721] RBP: 0000000000000001 R08: 0000000000000000 R09: ffff88001f904620 [ 2.602721] R10: ffff88001f96fb60 R11: ffff880019e9d100 R12: ffff88001f96fb18 [ 2.602721] R13: ffff880019d4f680 R14: ffff88001f904610 R15: ffff8800198f7b80 [ 2.602721] FS: 00007f3eee917700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000 [ 2.602721] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2.602721] CR2: 00007f3eee4a15cb CR3: 000000001f933000 CR4: 00000000000006b0 [ 2.602721] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2.602721] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 2.602721] Stack: [ 2.602721] 0000000000000000 ffff88001f96fb18 ffff880019d4f000 ffff88001f96fb18 [ 2.602721] ffff880019d4f000 ffffffff81332105 ffff88001f96fb50 ffffffff814464c0 [ 2.602721] ffff88001f96fb18 ffff88001f904600 ffff880019d4f000 ffffffff813326e5 [ 2.602721] Call Trace: [ 2.602721] [<ffffffff81332105>] ? __switchdev_port_obj_add+0x25/0x90 [ 2.602721] [<ffffffff813326e5>] ? switchdev_port_obj_add+0x25/0xc0 [ 2.602721] [<ffffffff813327b1>] ? switchdev_port_fdb_add+0x31/0x40 [ 2.602721] [<ffffffff8123911f>] ? rtnl_fdb_add+0xff/0x1e0 [ 2.602721] [<ffffffff81237d8e>] ? rtnetlink_rcv_msg+0x7e/0x250 [ 2.602721] [<ffffffff8121d1ce>] ? __skb_recv_datagram+0xfe/0x4b0 [ 2.602721] [<ffffffff81237d10>] ? rtnetlink_rcv+0x30/0x30 [ 2.602721] [<ffffffff81247958>] ? netlink_rcv_skb+0xa8/0xd0 [ 2.602721] [<ffffffff81237cff>] ? rtnetlink_rcv+0x1f/0x30 [ 2.602721] [<ffffffff81247220>] ? netlink_unicast+0x150/0x200 [ 2.602721] [<ffffffff81247714>] ? netlink_sendmsg+0x374/0x3e0 [ 2.602721] [<ffffffff8120f8df>] ? sock_sendmsg+0xf/0x30 [ 2.602721] [<ffffffff8120ffd3>] ? ___sys_sendmsg+0x1f3/0x200 [ 2.602721] [<ffffffff812100e5>] ? ___sys_recvmsg+0x105/0x140 [ 2.602721] [<ffffffff810a36f0>] ? SyS_readahead+0x90/0x90 [ 2.602721] [<ffffffff81098dfd>] ? filemap_map_pages+0x1ed/0x210 [ 2.602721] [<ffffffff810b77fc>] ? handle_mm_fault+0x5fc/0xe50 [ 2.602721] [<ffffffff81210ef9>] ? __sys_sendmsg+0x39/0x70 [ 2.602721] [<ffffffff8133ce17>] ? system_call_fastpath+0x12/0x6a [ 2.602721] Code: b7 8f a0 06 00 00 48 83 bf 88 06 00 00 00 74 1d 48 83 c4 08 89 ee 4c 89 ef 5b 5d 41 5c 41 5d 0f b7 c9 45 31 c0 e9 51 db ff ff 90 <0f> 0b b8 ea ff ff ff e9 cf fe ff ff 0f 1f 40 00 41 57 41 56 b9 [ 2.602721] RIP [<ffffffff811f1470>] rocker_port_obj_add+0x150/0x160 [ 2.602721] RSP <ffff88001f96fa98> [ 2.615848] ---[ end trace 4f7b4f1c98077108 ]--- The above is resolved by not adding the new FDB entry to the FDB table if trans == SWITCHDEV_TRANS_PREPARE. For symmetry this patch also skips deleting FDB entries from the FDB table trans == SWITCHDEV_TRANS_PREPARE. However, my analysis is that this never occurs as trans is always SWITCHDEV_TRANS_NONE when removing FDB entries. Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21rocker: do not delete fdb entries in rocker_port_fdb_flush() when preparing transactionsSimon Horman1-1/+2
rocker_port_fdb_flush() is called by rocker_port_stp_update() which in turn may be called with trans == SWITCHDEV_TRANS_PREPARE and then trans == SWITCHDEV_TRANS_COMMIT from switchdev_port_attr_set() via br_set_state(). When rocker_port_fdb_flush() is called with trans == SWITCHDEV_TRANS_PREPARE it calls rocker_port_fdb_learn() for each entry in the FDB table which in turn calls rocker_flow_tbl_bridge() which will allocate memory using rocker_port_kzalloc(). rocker_port_fdb_learn() will then remove the entry from the FDB table. Then when rocker_port_fdb_learn() is called with trans == SWITCHDEV_TRANS_PREPARE no calls are made to rocker_port_fdb_learn() because there are no longer any entries present in the FDB table. Thus the memory previously allocated by rocker_port_fdb_learn() is leaked resulting in the kernel BUG() below. Furthermore, it looks like the driver ends up with an incorrect view of the fdb table as the FDB entries are purged from the driver's table but not the hardware's table. ip link add br0 type bridge ip link set up dev eth0 sleep 1 ip link set dev eth0 master br0 [ 3.704360] ------------[ cut here ]------------ [ 3.704611] kernel BUG at drivers/net/ethernet/rocker/rocker.c:4289! [ 3.704962] invalid opcode: 0000 [#1] SMP [ 3.705537] Modules linked in: [ 3.705919] CPU: 0 PID: 63 Comm: ip Not tainted 4.1.0-rc3-01046-gb9fbe709de4d #1044 [ 3.706191] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.0-0-g4c59f5d-20150219_092859-nilsson.home.kraxel.org 04/01/2014 [ 3.706820] task: ffff880019f70150 ti: ffff88001f92c000 task.ti: ffff88001f92c000 [ 3.707138] RIP: 0010:[<ffffffff811f0080>] [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0 [ 3.707990] RSP: 0018:ffff88001f92f808 EFLAGS: 00000212 [ 3.708200] RAX: ffff880019d4fa68 RBX: ffff880019d4f000 RCX: 0000000000000000 [ 3.708471] RDX: 000000000000000c RSI: ffff88001f92f890 RDI: ffff880019d4f680 [ 3.708740] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000004 [ 3.708999] R10: ffff880000034024 R11: 0000000000000000 R12: ffff88001f92f890 [ 3.709276] R13: ffff88001f8f1c00 R14: 000000000000000b R15: 0000000000000000 [ 3.709303] FS: 00007f8ab66bd700(0000) GS:ffff88001b000000(0000) knlGS:0000000000000000 [ 3.709303] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.709303] CR2: 0000000000654988 CR3: 000000001f8f3000 CR4: 00000000000006b0 [ 3.709303] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.709303] DR3: 0000000000000000 DR6: 0000000000000000 DR7: 0000000000000000 [ 3.709303] Stack: [ 3.709303] ffff88001f8f1c00 000000000000000b ffff88001f92f890 ffff880019d4f000 [ 3.709303] ffff88001f92f890 ffffffff813332f5 ffff88001f92f880 0000000000000000 [ 3.709303] ffff88001f92f890 0000000000000001 ffff880019d4f000 ffffffff81333627 [ 3.709303] Call Trace: [ 3.709303] [<ffffffff813332f5>] ? __switchdev_port_attr_set+0x25/0x90 [ 3.709303] [<ffffffff81333627>] ? switchdev_port_attr_set+0x27/0x120 [ 3.709303] [<ffffffff81318e86>] ? br_set_state+0x36/0x50 [ 3.709303] [<ffffffff8131795c>] ? br_add_if+0x37c/0x400 [ 3.709303] [<ffffffff81238ce1>] ? do_setlink+0x7e1/0x800 [ 3.709303] [<ffffffff8111f980>] ? radix_tree_lookup_slot+0x10/0x30 [ 3.709303] [<ffffffff81136fba>] ? nla_parse+0xaa/0x110 [ 3.709303] [<ffffffff81239c98>] ? rtnl_newlink+0x548/0x870 [ 3.709303] [<ffffffff8111f900>] ? __radix_tree_lookup+0x40/0xb0 [ 3.709303] [<ffffffff81136f3e>] ? nla_parse+0x2e/0x110 [ 3.709303] [<ffffffff81237d7e>] ? rtnetlink_rcv_msg+0x7e/0x250 [ 3.709303] [<ffffffff8121d1be>] ? __skb_recv_datagram+0xfe/0x4b0 [ 3.709303] [<ffffffff81237d00>] ? rtnetlink_rcv+0x30/0x30 [ 3.709303] [<ffffffff81247948>] ? netlink_rcv_skb+0xa8/0xd0 [ 3.709303] [<ffffffff81237cef>] ? rtnetlink_rcv+0x1f/0x30 [ 3.709303] [<ffffffff81247210>] ? netlink_unicast+0x150/0x200 [ 3.709303] [<ffffffff81247704>] ? netlink_sendmsg+0x374/0x3e0 [ 3.709303] [<ffffffff8120f8cf>] ? sock_sendmsg+0xf/0x30 [ 3.709303] [<ffffffff8120ffc3>] ? ___sys_sendmsg+0x1f3/0x200 [ 3.709303] [<ffffffff812100d5>] ? ___sys_recvmsg+0x105/0x140 [ 3.709303] [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90 [ 3.709303] [<ffffffff812228d9>] ? dev_get_by_name_rcu+0x69/0x90 [ 3.709303] [<ffffffff81217b7d>] ? skb_dequeue+0x4d/0x60 [ 3.709303] [<ffffffff81217bb0>] ? skb_queue_purge+0x20/0x30 [ 3.709303] [<ffffffff810ebdcf>] ? __inode_wait_for_writeback+0x5f/0xb0 [ 3.709303] [<ffffffff810648b0>] ? autoremove_wake_function+0x30/0x30 [ 3.709303] [<ffffffff81210ee9>] ? __sys_sendmsg+0x39/0x70 [ 3.709303] [<ffffffff8133e097>] ? system_call_fastpath+0x12/0x6a [ 3.709303] Code: bb 90 06 00 00 48 c7 04 24 00 00 00 00 45 31 c9 45 31 c0 48 c7 c1 c0 b7 1e 81 89 ea e8 da da ff ff eb 95 0f 1f 84 00 00 00 00 00 <0f> 0b 66 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 48 83 fe 15 75 [ 3.709303] RIP [<ffffffff811f0080>] rocker_port_attr_set+0xe0/0xf0 [ 3.709303] RSP <ffff88001f92f808> [ 3.721409] ---[ end trace b7481fcb7cb032aa ]--- Segmentation fault Fixes: c4f20321d968 ("rocker: support prepare-commit transaction model") Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-17switchdev: add support for fdb add/del/dump via switchdev_port_obj ops.Samudrala, Sridhar1-107/+81
- introduce port fdb obj and generic switchdev_port_fdb_add/del/dump() - use switchdev_port_fdb_add/del/dump in rocker/team/bonding ndo ops. - add support for fdb obj in switchdev_port_obj_add/del/dump() - switch rocker to implement fdb ops via switchdev_ops v3: updated to sync with named union changes. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-15rocker: fix a neigh entry leak issueYing Xue1-3/+5
Once we get a neighbour through looking up arp cache or creating a new one in rocker_port_ipv4_resolve(), the neighbour's refcount is already taken. But as we don't put the refcount again after it's used, this makes the neighbour entry leaked. Suggested-by: Eric Dumazet <edumazet@google.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13switchdev: don't use anonymous union on switchdev attr/obj structsScott Feldman1-9/+9
Older gcc versions (e.g. gcc version 4.4.6) don't like anonymous unions which was causing build issues on the newly added switchdev attr/obj structs. Fix this by using named union on structs. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13switchdev: sparse warning: pass ipv4 fib dst as network-byte orderScott Feldman1-3/+4
And let driver convert it to host-byte order as needed. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12rocker: make checkpatch -f cleanScott Feldman1-10/+9
Well almost clean: ignore the CHECKs for space after cast operator and some longer-than-80 char cases where for readability it's better to keep as-is. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: remove NETIF_F_HW_SWITCH_OFFLOAD feature flagScott Feldman1-2/+1
Roopa said remove the feature flag for this series and she'll work on bringing it back if needed at a later date. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert fib_ipv4_add/del over to switchdev_port_obj_add/delScott Feldman1-27/+14
The IPv4 FIB ops convert nicely to the switchdev objs and we're left with only four switchdev ops: port get/set and port add/del. Other objs will follow, such as FDB. So go ahead and convert IPv4 FIB over to switchdev obj for consistency, anticipating more objs to come. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: cut over to new switchdev_port_bridge_getlinkScott Feldman1-14/+1
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: cut over to new switchdev_port_bridge_dellinkScott Feldman1-0/+1
Rocker, bonding and team and switch over to the new switchdev_port_bridge_dellink to avoid duplicating code in each driver. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: cut over to new switchdev_port_bridge_setlinkScott Feldman1-41/+1
Rocker, bonding, and team can now use the switchdev bridge setlink to parse raw netlink; no need to duplicate this code in each driver. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: add bridge port flags attrScott Feldman1-0/+25
rocker: use switchdev get/set attr for bridge port flags Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12rocker: use switchdev add/del obj for bridge port vlansScott Feldman1-7/+123
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert STP update to switchdev attr setScott Feldman1-9/+5
STP update is just a settable port attribute, so convert switchdev_port_stp_update to an attr set. For DSA, the prepare phase is skipped and STP updates are only done in the commit phase. This is because currently the DSA drivers don't need to allocate any memory for STP updates and the STP update will not fail to HW (unless something horrible goes wrong on the MDIO bus, in which case the prepare phase wouldn't have been able to predict anyway). Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12rocker: support prepare-commit transaction modelScott Feldman1-249/+451
For rocker, support prepare-commit transaction model for setting attributes (and for adding objects). This requires rocker to preallocate memory needed for the commit up front in the prepare phase. Since rtnl_lock is held between prepare-commit, store the allocated memory on a queue hanging off of the rocker_port. Also, in prepare phase, do everything right up to calling into HW. The same code paths are tranversed in the driver for both prepare and commit phases. In some cases, any state modified in the prepare phase must be reverted before returning so the commit phase makes the same decisions. As a consequence of holding rtnl_lock in process context for all attr sets (and obj adds), all memory is GFP_KERNEL allocated and we don't need to busy spin waiting for the device to complete the command. So the bulk of this patch is simplifying the memory allocations to only use GFP_KERNEL and to remove the nowait flag and busy spin loop. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: convert parent_id_get to switchdev attr getScott Feldman1-5/+12
Switch ID is just a gettable port attribute. Convert switchdev op switchdev_parent_id_get to a switchdev attr. Note: for sysfs and netlink interfaces, SWITCHDEV_ATTR_PORT_PARENT_ID is called with SWITCHDEV_F_NO_RECUSE to limit switch ID user-visiblity to only port netdevs. So when a port is stacked under bond/bridge, the user can only query switch id via the switch ports, but not via the upper devices Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: s/swdev_/switchdev_/Jiri Pirko1-18/+19
Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12switchdev: s/netdev_switch_/switchdev_/ and s/NETDEV_SWITCH_/SWITCHDEV_/Jiri Pirko1-5/+5
Turned out that "switchdev" sticks. So just unify all related terms to use this prefix. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Acked-by: Andy Gospodarek <gospo@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+3
Merge net into net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-01net: rocker: Use ether_addr_equalSimon Horman1-2/+2
A small cleanup to make use of the ether_addr_equal helper. Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-29bridge/nl: remove wrong use of NLM_F_MULTINicolas Dichtel1-2/+3
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: e5a55a898720 ("net: create generic bridge ops") Fixes: 815cccbf10b2 ("ixgbe: add setlink, getlink support to ixgbe and ixgbevf") CC: John Fastabend <john.r.fastabend@intel.com> CC: Sathya Perla <sathya.perla@emulex.com> CC: Subbu Seetharaman <subbu.seetharaman@emulex.com> CC: Ajit Khaparde <ajit.khaparde@emulex.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: intel-wired-lan@lists.osuosl.org CC: Jiri Pirko <jiri@resnulli.us> CC: Scott Feldman <sfeldma@gmail.com> CC: Stephen Hemminger <stephen@networkplumber.org> CC: bridge@lists.linux-foundation.org Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-16rocker: fix error return code in rocker_probe()Wei Yongjun1-0/+1
Fix to return -EINVAL from the invalid PCI region size error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+7
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24rocker: handle non-bridge master changeSimon Horman1-1/+7
Master change notifications may occur other than when joining or leaving a bridge, for example when being added to or removed from a bond or Open vSwitch. Previously in those cases rocker_port_bridge_leave() was called which results in a null-pointer dereference as rocker_port->bridge_dev is NULL because there is no bridge device. This patch makes provision for doing nothing in such cases. Fixes: 6c7079450071f ("rocker: implement L2 bridge offloading") Acked-by: Jiri Pirko <jiri@resnulli.us> Acked-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18rocker: add support for phys_port_nameDavid Ahern1-0/+64
Implement the phys_port_name operation. Port names are pulled from the rocker hardware model in qemu and default to the qemu name + port id. e.g., sw1p1: flags=4098<BROADCAST,MULTICAST> mtu 1500 ether 52:54:00:12:35:01 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 where 'sw1' comes from the qemu command line -device rocker,name=sw1, and 'p1' is port 1. Patch is adapted from Scott's phys_port_id patch. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16rocker: replace fixed stack allocation with dynamic allocationScott Feldman1-3/+10
In hast to fix some sparse warning, I hard-coded a fix-sized array on the stack which is probably too big for kernel standards. Fix this by converting array to dynamic allocation. Signed-off-by: Scott Feldman <sfeldma@gmail.com> Acked-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16switchdev: use new swdev opsScott Feldman1-28/+36
Move swdev wrappers over to new swdev ops (from previous ndo ops). No functional changes to the implementation. Signed-off-by: Scott Feldman <sfeldma@gmail.com> rocker: move to new swdev ops Signed-off-by: Scott Feldman <sfeldma@gmail.com> dsa: move to new swdev ops Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09switchdev: add netlink flags to IPv4 FIB add opScott Feldman1-1/+2
Pass in the netlink flags (NLM_F_*) into switchdev driver for IPv4 FIB add op to allow driver to 1) optimize hardware updates, 2) handle ip route prepend and append commands correctly. Suggested-by: Jamal Hadi Salim <jhs@mojatatu.com> Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Scott Feldman <sfeldma@gmail.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-06rocker: sparse: fix dynamic allocation on stack warningScott Feldman1-1/+1
Signed-off-by: Scott Feldman <sfeldma@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.