aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/efx.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2013-03-07sfc: Remove rx_alloc_method SKBAlexandre Rames1-1/+0
[bwh: Remove more dead code, and make efx_ptp_rx() pull the data it needs into the header area.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-03-06sfc: Disable soft interrupt handling during efx_device_detach_sync()Ben Hutchings1-2/+2
efx_device_detach_sync() locks all TX queues before marking the device detached and thus disabling further TX scheduling. But it can still be interrupted by TX completions which then result in TX scheduling in soft interrupt context. This will deadlock when it tries to acquire a TX queue lock that efx_device_detach_sync() already acquired. To avoid deadlock, we must use netif_tx_{,un}lock_bh(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-12-01sfc: lock TX queues when calling netif_device_detach()Daniel Pieczko1-0/+13
The assertion of netif_device_present() at the top of efx_hard_start_xmit() may fail if we don't do this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-09-07sfc: Add channel specific receive_skb handler and post_remove callbackStuart Hodgson1-0/+1
Allows an extra channel to override the standard receive_skb handler and also for extra non generic operations to be performed on remove. Also set default rx strategy so only skbs can be delivered to the PTP receive function. Signed-off-by: Stuart Hodgson <smhodgson@solarflare.com> Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-08-02sfc: Fix maximum number of TSO segments and minimum TX queue sizeBen Hutchings1-4/+10
Currently an skb requiring TSO may not fit within a minimum-size TX queue. The TX queue selected for the skb may stall and trigger the TX watchdog repeatedly (since the problem skb will be retried after the TX reset). This issue is designated as CVE-2012-3412. Set the maximum number of TSO segments for our devices to 100. This should make no difference to behaviour unless the actual MSS is less than about 700. Increase the minimum TX queue size accordingly to allow for 2 worst-case skbs, so that there will definitely be space to add an skb after we wake a queue. To avoid invalidating existing configurations, change efx_ethtool_set_ringparam() to fix up values that are too small rather than returning -EINVAL. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-06sfc: Run event/IRQ self-test asynchronously when interface is brought upBen Hutchings1-1/+1
Generate a test event on each event queue whenever the interface is brought up, then after 1 second check that we have either handled a test event or handled another IRQ for each event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-02-16sfc: Add support for 'extra' channel typesBen Hutchings1-0/+1
Abstract some of the channel operations to allow for 'extra' channels that do not have RX or TX queues. - Try to assign a channel to each extra channel type that is enabled for the NIC, but gracefully degrade if we can't allocate sufficient MSI-X vectors - Allow each extra channel type to generate its own channel name - Allow channel types to disable reallocation and reinitialisation of their channels Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27sfc: Replace efx_rx_buffer::is_page and other booleans with a flags fieldBen Hutchings1-2/+2
Replace checksummed and discard booleans from efx_handle_rx_event() with a bitmask, added to the flags field. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-27sfc: Clean up test interrupt handlingBen Hutchings1-0/+6
Interrupts are normally generated by the event queues, moderated by timers. However, they may also be triggered by detection of a 'fatal' error condition (e.g. memory parity error) or by the host writing to certain CSR fields as part of a self-test. The IRQ level/index used for these on Falcon rev B0 and Siena is set by the KER_INT_LEVE_SEL field and cached by the driver in efx_nic::fatal_irq_level. Since this value is also relevant to self-tests rename the field to just 'irq_level'. Avoid unnecessary cache traffic by using a per-channel 'last_irq_cpu' field and only writing to the per-controller field when the interrupt matches efx_nic::irq_level. Remove the volatile qualifier and use ACCESS_ONCE in the places we read these fields. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2012-01-04sfc: Remove now-unused filter functionBen Hutchings1-2/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Add support for retrieving and removing filters by IDBen Hutchings1-0/+12
These new functions will support an implementation of the ethtool RX NFC rules API. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-04sfc: Use consistent types for filter IDs, indices and search depthsBen Hutchings1-1/+1
Filter IDs are u32 (but never very large) so an ID/error return value should have type s32. Filter indices and search depths are never negative, so should have type unsigned int. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06sfc: Remove device ID macros only used onceBen Hutchings1-4/+0
The SFC9020/SFL9021 device IDs are only used in the device ID table, where we can just as well use comments. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-10-28Merge branch 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pciLinus Torvalds1-4/+0
* 'next-rebase' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci: PCI: Clean-up MPS debug output pci: Clamp pcie_set_readrq() when using "performance" settings PCI: enable MPS "performance" setting to properly handle bridge MPS PCI: Workaround for Intel MPS errata PCI: Add support for PASID capability PCI: Add implementation for PRI capability PCI: Export ATS functions to modules PCI: Move ATS implementation into own file PCI / PM: Remove unnecessary error variable from acpi_dev_run_wake() PCI hotplug: acpiphp: Prevent deadlock on PCI-to-PCI bridge remove PCI / PM: Extend PME polling to all PCI devices PCI quirk: mmc: Always check for lower base frequency quirk for Ricoh 1180:e823 PCI: Make pci_setup_bridge() non-static for use by arch code x86: constify PCI raw ops structures PCI: Add quirk for known incorrect MPSS PCI: Add Solarflare vendor ID and SFC4000 device IDs
2011-09-16sfc: Validate IRQ moderation parameters in efx_init_irq_moderation()Ben Hutchings1-2/+3
Add a range check, and move the check that RX and TX are consistent from efx_ethtool_set_coalesce(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16sfc: Correct reporting and validation of TX interrupt coalescingBen Hutchings1-0/+2
The reported TX IRQ moderation is generated in a completely crazy way. Make it simple and correct. When channels are shared between RX and TX, TX IRQ moderation must be the same as RX IRQ moderation, but must be specified as 0! Allow it to be either specified as the same, or left at its previous value in which case it will be quietly overridden. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-09-16sfc: Use consistent types for interrupt coalescing parametersBen Hutchings1-2/+2
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-08-11sfc: Move the Solarflare driversJeff Kirsher1-0/+147
Moves the Solarflare drivers into drivers/net/ethernet/sfc/ and make the necessary Kconfig and Makefile changes. CC: Steve Hodgson <shodgson@solarflare.com> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.