aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/sfc/net_driver.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-07-21sfc: support cascaded multicast filtersDaniel Pieczko1-0/+2
If the workaround to support cascaded multicast filters ("workaround_26807") is enabled, the broadcast filter and individual multicast filters are not inserted when in promiscuous or allmulti mode. There is a race while inserting and removing filters when entering and leaving promiscuous mode. When changing promiscuous state with cascaded multicast filters, the old multicast filters are removed before inserting the new filters to avoid duplicating packets; this can lead to dropped packets until all filters have been inserted. The efx_nic:mc_promisc flag is added to record the presence of a multicast promiscuous filter; this gives a simple way to tell if the promiscuous state is changing. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09sfc: Report TX completions to BQL after all TX events in interruptPeter Dunning1-0/+2
The limit for BQL is updated each time we call netdev_tx_completed_queue. Without this patch the BQL limit was updated for every TX event we see. The issue was that this only updated the limit to handle the data we complete in two events as the first event wouldn't show that enough traffic had been processed between them. This was OK when interrupt moderation was off but not when it was on as more data had to be completed in a single interrupt. The patch changes this so that we do report the completion to BQL only when all the TX events in the interrupt have been processed. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-02sfc: Implement ndo_gets_phys_port_id() for EF10 VFsShradha Shah1-0/+2
Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: set the MAC address using MC_CMD_VADAPTOR_SET_MACShradha Shah1-1/+2
Add a set_mac_address() NIC-type function for EF10 only, and use this to set the MAC address on the vadaptor. For Siena and earlier, the MAC address continues to be set by MC_CMD_SET_MAC; this is still called on EF10, and including a MAC address in this command has no effect. The sriov_mac_address_changed() NIC-type function is no longer needed on EF10, but it is needed for Siena where it is used to update the peer address of the PF for VFDI. Change this to use the new set_mac_address function pointer. efx_ef10_sriov_mac_address_changed() is no longer called, as VFs will try to change the MAC address on their vadaptor rather than trying to change to the context of the PF to alter the vport. When a VF is running in direct passthrough mode with MAC spoofing enabled, it will be able to change the MAC address on its vadaptor. In this case, there is a link to the PF, so find the correct VF in its ef10_vf array and update the MAC address. ndo_set_mac_address() can be called during driver unload while bonding, and in this case the device has already been stopped, so don't call efx_net_open() to restart it after reconfiguration. efx->port_enabled is set to false in efx_stop_port(), so it is indicator of whether the device needs to be restarted. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: add ndo_set_vf_link_state() function for EF10Edward Cree1-0/+2
Exercised with "ip link set <PF intf> vf <vf_i> state {auto|enable|disable}" Sets the reporting policy for VF link state to either - mirror physical link state - always up - always down get VF link state mode in efx_ef10_sriov_get_vf_config Exercised by "ip link show <PF intf>"; output will include a line like vf 0 MAC 12:34:56:78:9a:bc, link-state auto Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: Enable a VF to get its own MAC addressDaniel Pieczko1-0/+1
A VF's MAC address is set by its parent PF and added to its vport. To get this MAC address, the VF must use MC_CMD_ VPORT_GET_MAC_ADDRESSES. In the current scheme, a VF's vport should only have one MAC address, so warn if this is not the case. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: protect filter table against use-after-freeEdward Cree1-1/+4
If MCDI timeouts are encountered during efx_ef10_filter_table_remove(), an FLR will be queued, but efx->filter_state will still be kfree()d. The queued FLR will then call efx_ef10_filter_table_restore(), which will try to use efx->filter_state. This previously caused a panic. This patch adds an rwsem to protect the existence of efx->filter_state, separately from the spinlock protecting its contents. Users which can race against efx_ef10_filter_table_remove() should down_read this rwsem. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-21sfc: save old MAC address in case sriov_mac_address_changed failsShradha Shah1-1/+1
Otherwise the PF and VF can disagree on the VF's MAC address and this leads to strange behaviour, up to and including kernel panics. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Bind the sfc driver to any available VF'sShradha Shah1-0/+1
Add the device ID of the VF to the PCI device ID table. Added a boolean flag is_vf in efx_nic_type to differentiate between a VF and PF at probe time. This flag is useful in later patches while setting MAC address specially in the PCI-passthrough case. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Add use of shared RSS contexts.Jon Cooper1-1/+2
Allow PFs to allocate shared RSS contexts if we exhaust our exclusive RSS contexts. Make VFs use shared RSS contexts in all cases. Spruce up error handling so that the shadow copy of the RSS table is updated after successful update, rather than in all cases, so that we report the actual contents of the RSS table after a failure to set it, rather than what we'd like it to be. Populate context_size parameter when vacuously allocating RSS context of size 1. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Prepare to bind the sfc driver to the VF.Shradha Shah1-0/+2
Added efx_nic_type structure for VF. Mapped a different BAR for VF as it uses BAR 0 for memory. Added functions sriov_init and sriov_fini. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: create VEB vswitch and vport above default firmware setupDaniel Pieczko1-0/+3
Adds functions to allocate and free vswitches and vports; vadaptors are automatically allocated and freed when TX/RX queues are initialised and finalised. This vswitching structure is only created if the firmware supports it, so a check that full-featured firmware is running is performed first. If the MC resets, the vswitching infrastructure will need to be recreated, so mark the "must_probe_vswitching" flag when an MC reboot is detected. Don't try to create a vswitch if vf-count=0 This allocation of vswitches and vports does not currently support configuring VLAN tags, but that can be added in a future change. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Enable VF's via a write to the sysfs file sriov_numvfsShradha Shah1-0/+1
This patch adds support for the use of sriov_configure on EF10 to enable Virtual Functions while the driver is loaded. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Move and rename efx_vf struct to siena_vfDaniel Pieczko1-3/+0
The efx_vf struct contains Siena-specific fields for VFs, so rename to siena_vf. Also move it into the siena_nic_data struct, as EF10 will track its VFs in its own ef10_nic_data, storing much less information about them since VFDI is no longer used. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-09sfc: Own header for nic-specific sriov functions, single instance of netdev_ops and sriov removed from Falcon codeShradha Shah1-0/+8
By putting all the efx_{siena,ef10}_sriov_* declarations in {siena,ef10}_sriov.h, ensure they cannot be called from nic-generic code. Also fixes up an instance of this, where mcdi.c was calling efx_siena_sriov_flr. The single instance of netdev_ops should call general high level functions that can then call something adapter specific in efx_nic_type. We should only do adapter specialisation via efx_nic_type. Removal of sriov functionality from the Falcon code means that tests are needed for the presence of some callbacks. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06sfc: Add NIC type operations to replace direct calls from efx.c into siena_sriov.cShradha Shah1-0/+5
Also add dummy functions where required to avoid NULL pointer dereference. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06sfc: Move the current VF state from efx_nic into siena_nic_dataShradha Shah1-14/+0
This patch series provides a base and cleanup for the upcoming EF10 SRIOV support. This patch moves the VF state into siena_nic_data as a basis to save the VF state based on nic type. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-22sfc: Add support for busy pollingAlexandre Rames1-0/+148
This patch adds the sfc driver code for implementing busy polling. It adds ndo_busy_poll method and locking between it and napi poll. It also adds each napi to the napi_hash right after netif_napi_add(). Uses efx_start_eventq and efx_stop_eventq in the self tests. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-17sfc: Add per-queue statistics in ethtoolAndrew Rybchenko1-0/+4
Implement per channel software TX and RX packet counters accessed as ethtool statistics. This allows confirmation with MAC statistics. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15sfc: add extra RX drop counters for nodesc_trunc and noskb_dropEdward Cree1-0/+2
Added a counter rx_noskb_drop for failure to allocate an skb. Summed the per-channel rx_nodesc_trunc counters earlier so that they can be included in rx_dropped. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast)Edward Cree1-0/+4
When an MCDI command times out (whether or not we find it completed when we poll), call efx_mcdi_abandon(), which tells all subsequent MCDI calls to fail-fast, and queues up an FLR. Because an FLR doesn't lead to receiving any reboot even from the MC (unlike most other types of reset), we have to call efx_ef10_reset_mc_allocations. In efx_start_all(), if a reset (of any kind) is pending, we bail out. Without this, attempts to reconfigure (e.g. change mtu) can cause driver/mc state inconsistency if the first MCDI call triggers an FLR. For similar reasons, on EF10, in efx_reset_down(method=RESET_TYPE_MCDI_TIMEOUT), set the number of active queues to zero before calling efx_stop_all(). And, on farch, in efx_reset_up(method=RESET_TYPE_MCDI_TIMEOUT), set active_queues and flushes pending & outstanding to zero. efx_mcdi_mode_{poll,event}() should not take us out of fail-fast mode. Instead, this is done by efx_mcdi_reset() after the FLR completes. The new FLR reset_type RESET_TYPE_MCDI_TIMEOUT doesn't really fit into the hierarchy of reset 'scopes' whereby efx_reset() decides some resets subsume others. Thus, it uses separate logic. Also, fixed up some inconsistency around RESET_TYPE_MC_BIST, which was in the wrong place in that hierarchy. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-12sfc: Add/remove blank lines to tasteBen Hutchings1-1/+0
Remove trailing blank lines in several files. Use only one blank line between functions. Add a blank line as a separator in a few places. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-12sfc: remove unused 'enum efx_rx_alloc_method'Andrew Rybchenko1-6/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: remove unused 'refcnt' from efx_rx_page_stateAndrew Rybchenko1-3/+0
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Implement efx_nic_type::filter_clear_rx operation for EF10Ben Hutchings1-3/+4
The operation can now fail, so change its return type to int. Remove the inline wrapper while we're changing the signature. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Change efx_nic_type::rx_push_indir_table to push hash key as wellAndrew Rybchenko1-2/+2
The EF10 implementation already does this, and it makes more logical sense to group the RSS hash key and indirection table together. Rename the operation to rx_push_rss_config. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Associate primary and secondary functions of controllerBen Hutchings1-0/+10
The primary function of an EF10 controller will share its clock device with other functions in the same domain (which we call secondary functions). To this end, we need to associate functions on the same controller. We do not control probe order, so allow primary and secondary functions to appear in any order. Maintain global lists of all primary functions and of unassociated secondary functions, and a list of secondary functions on each primary function. Use the VPD serial number to tell whether functions are part of the same controller. VPD will not be readable by virtual functions, so this may need to be revisited later. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Store VPD serial number at probe timeBen Hutchings1-0/+3
Original version by Stuart Hodgson. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Add RX packet timestamping for EF10Jon Cooper1-0/+22
The EF10 firmware can optionally insert RX timestamps in the packet prefix. These only include the clock minor value. We must also enable periodic time sync events on each event queue which provide the high bits of the clock value. [bwh: Combined and rebased several changes. Added the above description and some sanity checks for inline vs separate timestamps. Changed efx_rx_skb_attach_timestamp() to read the packet prefix from the skb head area.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Copy RX prefix into skb head area in efx_rx_mk_skb()Ben Hutchings1-9/+0
We can potentially pull the entire packet contents into the head area and then free the page it was in. In order to read an inline timestamp safely, we need to copy the prefix into the head area as well. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: split setup of hardware timestamping into NIC-type operationDaniel Pieczko1-0/+9
I added efx_ptp_get_mode() to avoid moving the definition for efx_ptp_data, since the current PTP mode is needed for siena.c:siena_set_ptp_hwtstamp. [bwh: Also move the rx_filters mask, and add kernel-doc] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Correct RX dropped count for drops while interface is downJon Cooper1-0/+5
We don't directly control RX ingress on Siena or any later controllers, and so we cannot prevent packets from entering the RX datapath while the RX queues are not set up. This results in the hardware incrementing RX_NODESC_DROP_CNT, but it's not an error and we should not include it in error stats. When bringing an interface up or down, pull (or wait for) stats and count the number of packets that were dropped while the interface was down. Subtract this from the reported RX dropped count. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-12sfc: Add MC BISTs to ethtool offline self test on EF10Jon Cooper1-0/+1
To run BISTs the MC goes down in to a special mode where it will only respond to MCDI from the testing PF, and TX, RX and event queues are torn down. Other PFs get a message as it goes down to tell them it's going down. When the other PFs get this message, they check the soft status register to tell when the MC has rebooted after BIST mode and they can start recovery. [bwh: Convert the test result to 1 or -1 as for earlier NICs] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-12-06sfc: RX buffer allocation takes prefix size into account in IP header alignmentAndrew Rybchenko1-0/+3
rx_prefix_size is 4-bytes aligned on Falcon/Siena (16 bytes), but it is equal to 14 on EF10. So, it should be taken into account if arch requires IP header to be 4-bytes aligned (via NET_IP_ALIGN). Fixes: 8127d661e77f ('sfc: Add support for Solarflare SFC9100 family') Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-10-31sfc: Fix DMA unmapping issue with firmware assisted TSOAlexandre Rames1-0/+3
When using firmware assisted TSO, we use a single DMA mapping for the linear area of a TSO skb. We still have to segment the super-packet and insert a descriptor containing the original headers before each segment of payload, so we can unmap the linear area only after the last segment is completed. The unmapping information for the linear area is therefore associated with the last header descriptor. We calculate the DMA address to unmap from using the map length and the invariant that the end of the DMA mapping matches the end of the data referenced by the last descriptor. But this invariant is broken when there is TCP payload in the linear area. Fix this by adding and using an explicit dma_offset field. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Use TX PIO for sufficiently small packetsJon Cooper1-0/+2
Sufficiently small linear packets can be copied into the PIO buffer with a single call to memcpy_toio(). Non-linear packets require an intermediate cache-line-sized buffer. [bwh: I wrote the first version of this, but Jon did the hard work to handle non-linear packets.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Allocate and link PIO buffers; map them with write-combiningBen Hutchings1-0/+5
Try to allocate a segment of PIO buffer to each TX channel. If allocation fails, log an error but continue. PIO buffers must be mapped separately from the NIC registers, with write-combining enabled. Where the host page size is 4K, we could potentially map each VI's registers and PIO buffer separately. However, this would add significant complexity, and we also need to support architectures such as POWER which have a greater page size. So make a single contiguous write-combining mapping after the uncacheable mapping, aligned to the host page size, and link PIO buffers there. Where necessary, allocate additional VIs within the write-combining mapping purely for access to PIO buffers. Link all TX buffers to TX queues and the additional VIs in efx_ef10_dimension_resources() and in efx_ef10_init_nic() after an MC reboot. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Update copyright bannersBen Hutchings1-2/+2
Update the dates for files that have been added to in 2012-2013. Drop the 'Solarstorm' brand name that's still lingering here. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Add support for Solarflare SFC9100 familyBen Hutchings1-1/+5
This adds support for the EF10 network controller architecture and the SFC9100 family, starting with SFC9120 'Farmingdale', and bumps the driver version to 4.0. New features in the SFC9100 family include: - Flexible allocation of internal resources to PCIe physical and virtual functions under firmware control - RX event merging to reduce DMA writes at high packet rates - Integrated RX timestamping - PIO buffers for lower TX latency - Firmware-driven data path that supports additional offload features and filter types - Delivery of packets between functions and to multiple recipients, allowing firmware to implement a vswitch - Multiple RX flow hash (RSS) contexts with their own hash keys and indirection tables - 40G MAC (single port only) ...not all of which are enabled in this initial driver or the initial firmware release. Much of the new code is by Jon Cooper. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Extend struct efx_tx_buffer to allow pushing option descriptorsBen Hutchings1-1/+6
The TX path firmware for EF10 supports 'option descriptors' to control offloads and various other features. Add a flag and field for these in struct efx_tx_buffer, and don't treat them as DMA descriptors on completion. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Use a global count of active queues instead of pending drainsAlexandre Rames1-2/+2
On EF10, the firmware will initiate a queue flush in certain error cases. We need to accept that flush events might appear at any time after a queue has been initialised, not just when we try to flush them. We can handle Falcon-architecture in just the same way. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Prepare for RX scatter on EF10Jon Cooper1-2/+6
RX DMA scatter is always enabled on EF10. Adjust the common RX completion handling to allow for this. RX completion events on EF10 include the length used from a single descriptor, not the cumulative length used. Add a field to struct efx_rx_queue to hold the cumulative length. [bwh: Also fix a related comment] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Allow efx_nic_type::dimension_resources to failBen Hutchings1-1/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-29sfc: Allow event queue initialisation to failJon Cooper1-1/+1
On EF10, event queue initialisation requires an MCDI request which may return failure. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add support for reading packet length from prefixBen Hutchings1-0/+4
Define a flag for struct efx_rx_buffer and efx_rx_packet() that indicates packet length must be read from the prefix. If this is set, read the length in __efx_rx_packet() (when the prefix should have arrived in cache). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add TX merged completion counterBen Hutchings1-0/+2
Add a counter for TX merged completion events. This is implemented in the common TX path, because the NIC event handlers only know how many descriptors were completed, not how many packets. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Generalise packet hash lookup to support EF10 RX prefixJon Cooper1-2/+9
EF10 uses an entirely different RX prefix format from Falcon-arch. Extend struct efx_nic_type to describe this. [bwh: Also replace the magic numbers used for the Falcon-arch RX prefix] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Add a function pointer to abstract write of host time into NIC shared memoryLaurence Evans1-0/+1
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Delegate MAC/NIC statistic description to efx_nic_typeBen Hutchings1-78/+18
Various hardware statistics that are available for Siena are unavailable or meaningless for Falcon. Huntington adds further to the NIC-type-specific statistics, as it has different MAC blocks from Falcon/Siena. All NIC types still provide most statistics by DMA, and use little-endian byte order. Therefore: 1. Add some general utility functions for reporting hardware statistics, efx_nic_describe_stats() and efx_nic_update_stats(). 2. Add an efx_nic_type::describe_stats operation to get the number and names of statistics, implemented using efx_nic_describe_stats() 3. Change efx_nic_type::update_stats to store the core statistics (struct rtnl_link_stats64) or full statistics (array of u64) in a caller-provided buffer. Use efx_nic_update_stats() to aid in the implementation. 4. Rename struct efx_ethtool_stat to struct efx_sw_stat_desc and EFX_ETHTOOL_NUM_STATS to EFX_ETHTOOL_SW_STAT_COUNT. 5. Remove efx_nic::mac_stats and struct efx_mac_stats. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-08-27sfc: Move MTD operations into efx_nic_typeBen Hutchings1-1/+28
Merge the per-NIC-type MTD probe selection and struct efx_mtd_ops into struct efx_nic_type. Move the implementations into the appropriate source files. Several NVRAM functions are now only called from MTD operations which are now implemented in the same file (falcon.c or mcdi.c). There is no need for them to be extern, or to be defined at all if CONFIG_SFC_MTD is not enabled, so move them into the #ifdef CONFIG_SFC_MTD sections in those files. Most of the SPI-related definitions are also only used in falcon.c, so move them there. Put the remainder of spi.h into nic.h (which previously included it). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.