aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/socionext (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-11-04net: of_get_phy_mode: Change API to solve int/unit warningsAndrew Lunn1-3/+3
Before this change of_get_phy_mode() returned an enum, phy_interface_t. On error, -ENODEV etc, is returned. If the result of the function is stored in a variable of type phy_interface_t, and the compiler has decided to represent this as an unsigned int, comparision with -ENODEV etc, is a signed vs unsigned comparision. Fix this problem by changing the API. Make the function return an error, or 0 on success, and pass a pointer, of type phy_interface_t, where the phy mode should be stored. v2: Return with *interface set to PHY_INTERFACE_MODE_NA on error. Add error checks to all users of of_get_phy_mode() Fixup a few reverse christmas tree errors Fixup a few slightly malformed reverse christmas trees v3: Fix 0-day reported errors. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: netsec: Correct dma sync for XDP_TX framesIlias Apalodimas1-2/+2
bpf_xdp_adjust_head() can change the frame boundaries. Account for the potential shift properly by calculating the new offset before syncing the buffer to the device for XDP_TX Fixes: ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-17net: socionext: netsec: fix xdp stats accountingLorenzo Bianconi1-2/+3
Increment netdev rx counters even for XDP_DROP verdict. Report even tx bytes for xdp buffers (TYPE_NETSEC_XDP_TX or TYPE_NETSEC_XDP_NDO). Moreover account pending buffer length in netsec_xdp_queue_one as it is done for skb counterpart Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-01net: socionext: netsec: always grab descriptor lockLorenzo Bianconi1-23/+7
Always acquire tx descriptor spinlock even if a xdp program is not loaded on the netsec device since ndo_xdp_xmit can run concurrently with netsec_netdev_start_xmit and netsec_clean_tx_dring. This can happen loading a xdp program on a different device (e.g virtio-net) and xdp_do_redirect_map/xdp_do_redirect_slow can redirect to netsec even if we do not have a xdp program on it. Fixes: ba2b232108d3 ("net: netsec: add XDP support") Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: socionext: ave: Avoid using netdev_err() before calling register_netdev()Kunihiko Hayashi1-3/+3
Until calling register_netdev(), ndev->dev_name isn't specified, and netdev_err() displays "(unnamed net_device)". ave 65000000.ethernet (unnamed net_device) (uninitialized): invalid phy-mode setting ave: probe of 65000000.ethernet failed with error -22 This replaces netdev_err() with dev_err() before calling register_netdev(). Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: socionext: Fix a signedness bug in ave_probe()Dan Carpenter1-1/+1
The "phy_mode" variable is an enum and in this context GCC treats it as an unsigned int so the error handling is never triggered. Fixes: 4c270b55a5af ("net: ethernet: socionext: add AVE ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-27net: netsec: Fix signedness bug in netsec_probe()Dan Carpenter1-1/+1
The "priv->phy_interface" variable is an enum and in this context GCC will treat it as an unsigned int so the error handling is never triggered. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-21net: socionext: use devm_platform_ioremap_resource() to simplify codeYueHaibing1-3/+1
Use devm_platform_ioremap_resource() to simplify the code a bit. This is detected by coccinelle. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30net: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: "David S. Miller" <davem@davemloft.net> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Saeed Mahameed <saeedm@mellanox.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: netdev@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: remove static declaration for netsec_set_tx_de()Ilias Apalodimas1-45/+41
On commit ba2b232108d3 ("net: netsec: add XDP support") a static declaration for netsec_set_tx_de() was added to make the diff easier to read. Now that the patch is merged let's move the functions around and get rid of that Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: remove superfluous if statementIlias Apalodimas1-4/+4
While freeing tx buffers the memory has to be unmapped if the packet was an skb or was used for .ndo_xdp_xmit using the same arguments. Get rid of the unneeded extra 'else if' statement Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: netsec: start using buffers if page_pool registration succeededIlias Apalodimas1-8/+9
The current driver starts using page_pool buffers before calling xdp_rxq_info_reg_mem_model(). Start using the buffers after the registration succeeded, so we won't have to call page_pool_request_shutdown() in case of failure Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: core: page_pool: add user refcnt and reintroduce page_pool_destroyIvan Khoronzhuk1-6/+2
Jesper recently removed page_pool_destroy() (from driver invocation) and moved shutdown and free of page_pool into xdp_rxq_info_unreg(), in-order to handle in-flight packets/pages. This created an asymmetry in drivers create/destroy pairs. This patch reintroduce page_pool_destroy and add page_pool user refcnt. This serves the purpose to simplify drivers error handling as driver now drivers always calls page_pool_destroy() and don't need to track if xdp_rxq_info_reg_mem_model() was unsuccessful. This could be used for a special cases where a single RX-queue (with a single page_pool) provides packets for two net_device'es, and thus needs to register the same page_pool twice with two xdp_rxq_info structures. This patch is primarily to ease API usage for drivers. The recently merged netsec driver, actually have a bug in this area, which is solved by this API change. This patch is a modified version of Ivan Khoronzhuk's original patch. Link: https://lore.kernel.org/netdev/20190625175948.24771-2-ivan.khoronzhuk@linaro.org/ Fixes: 5c67bf0ec4d0 ("net: netsec: Use page_pool API") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-08net: netsec: Sync dma for device on buffer allocationIlias Apalodimas1-3/+1
cd1973a9215a ("net: netsec: Sync dma for device on buffer allocation") was merged on it's v1 instead of the v3. Merge the proper patch version Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: netsec: Sync dma for device on buffer allocationIlias Apalodimas1-0/+5
Quoting Arnd, We have to do a sync_single_for_device /somewhere/ before the buffer is given to the device. On a non-cache-coherent machine with a write-back cache, there may be dirty cache lines that get written back after the device DMA's data into it (e.g. from a previous memset from before the buffer got freed), so you absolutely need to flush any dirty cache lines on it first. Since the coherency is configurable in this device make sure we cover all configurations by explicitly syncing the allocated buffer for the device before refilling it's descriptors Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-05net: socionext: remove set but not used variable 'pkts'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/net/ethernet/socionext/netsec.c: In function 'netsec_clean_tx_dring': drivers/net/ethernet/socionext/netsec.c:637:15: warning: variable 'pkts' set but not used [-Wunused-but-set-variable] It is not used since commit ba2b232108d3 ("net: netsec: add XDP support") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01net: netsec: add XDP supportIlias Apalodimas1-27/+334
The interface only supports 1 Tx queue so locking is introduced on the Tx queue if XDP is enabled to make sure .ndo_start_xmit and .ndo_xdp_xmit won't corrupt Tx ring - Performance (SMMU off) Benchmark XDP_SKB XDP_DRV xdp1 291kpps 344kpps rxdrop 282kpps 342kpps - Performance (SMMU on) Benchmark XDP_SKB XDP_DRV xdp1 167kpps 324kpps rxdrop 164kpps 323kpps Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-01net: netsec: Use page_pool APIIlias Apalodimas2-47/+80
Use page_pool and it's DMA mapping capabilities for Rx buffers instead of netdev/napi_alloc_frag() Although this will result in a slight performance penalty on small sized packets (~10%) the use of the API will allow to easily add XDP support. The penalty won't be visible in network testing i.e ipef/netperf etc, it only happens during raw packet drops. Furthermore we intend to add recycling capabilities on the API in the future. Once the recycling is added the performance penalty will go away. The only 'real' penalty is the slightly increased memory usage, since we now allocate a page per packet instead of the amount of bytes we need + skb metadata (difference is roughly 2kb per packet). With a minimum of 4BG of RAM on the only SoC that has this NIC the extra memory usage is negligible (a bit more on 64K pages) Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: netsec: remove loops in napi Rx processIlias Apalodimas1-9/+2
netsec_process_rx was running in a loop trying to process as many packets as possible before re-enabling interrupts. With the recent DMA changes this is not needed anymore as we manage to consume all the budget without looping over the function. Since it has no performance penalty let's remove that and simplify the Rx path a bit Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-19net: netsec: initialize tx ring on ndo_openIlias Apalodimas1-14/+18
Since we changed the Tx ring handling and now depends on bit31 to figure out the owner of the descriptor, we should initialize this every time the device goes down-up instead of doing it once on driver init. If the value is not correctly initialized the device won't have any available descriptors Changes since v1: - Typo fixes Fixes: 35e07d234739 ("net: socionext: remove mmio reads on Tx") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23net: socionext: replace napi_alloc_frag with the netdev variant on initIlias Apalodimas1-4/+7
The netdev variant is usable on any context since it disables interrupts. The napi variant of the call should only be used within softirq context. Replace napi_alloc_frag on driver init with the correct netdev_alloc_frag call Changes since v1: - Adjusted commit message Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Fixes: 4acb20b46214 ("net: socionext: different approach on DMA") Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-2/+2
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-15net: socionext: remove mmio reads on TxIlias Apalodimas1-43/+54
Currently the driver issues 2 mmio reads to figure out the number of transmitted packets and clean them. We can get rid of the expensive reads since BIT 31 of the Tx descriptor can be used for that. We can also remove the budget counting of Tx completions since all of the descriptors are not deliberately processed. Performance numbers using pktgen are: size pre-patch(pps) post-patch(pps) 64 362483 427916 128 358315 411686 256 352725 389683 512 215675 216464 1024 113812 114442 Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-15net: socionext: correctly recover txq after being fullIlias Apalodimas1-11/+45
Running pktgen with packets sizes > 512b ends up in the interface Txq getting stuck. "netsec 522d0000.ethernet eth0: netsec_netdev_start_xmit: TxQFull!" appears on dmesg but the interface never recovers. It requires an ifconfig down/up to make the interface usable again. The reason that triggers this, is a race condition between .ndo_start_xmit and the napi completion. The available budget is calculated first and indicates the queue is full. Due to a costly netif_err() the queue is not stopped in time while the napi completion runs, clears the irq and frees up descriptors, thus the queue never wakes up again. Fix this by moving the print after stopping the queue, make the print ratelimited, add barriers and check for cleaned descriptors.. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+14
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Add MODULE_AUTHOR and MAINTAINERS entryKunihiko Hayashi1-0/+1
Add missing MODULE_AUTHOR of ave driver and an entry to MAINTAINERS. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Replace NET_IP_ALIGN with AVE_FRAME_HEADROOMKunihiko Hayashi1-6/+8
In commit 26a4676faa1a ("arm64: mm: define NET_IP_ALIGN to 0"), AVE controller affects this modification because the controller forces to ignore lower 2bits of buffer start address, and make 2-byte headroom, that is, data reception starts from (buffer + 2). This patch defines AVE_FRAME_HEADROOM macro as hardware-specific value, and replaces NET_IP_ALIGN with it. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Increase descriptors to improve performanceKunihiko Hayashi1-4/+5
To improve performance, this increases Rx descriptor to 256, Tx descriptor to 64, and adjusts NAPI weight to NAPI_POLL_WEIGHT. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Preserve wol state in suspend/resume sequenceKunihiko Hayashi1-0/+10
Since the wol state forces to be initialized after reset, the state should be preserved in suspend/resume sequence. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Set initial wol state to disabledKunihiko Hayashi1-1/+5
If wol state of phy hardware is enabled after reset, phy_ethtool_get_wol() returns that wol.wolopts is true. However, since net_device.wol_enabled is zero and this doesn't apply wol state until calling ethtool_set_wol(), so mdio_bus_phy_may_suspend() returns true, that is, it's in a state where phy can suspend even though wol state is enabled. In this inconsistency, phy_suspend() returns -EBUSY, and at last, suspend sequence fails with the following message: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x58 returns -16 PM: Device 65000000.ethernet-ffffffff:01 failed to suspend: error -16 PM: Some devices failed to suspend, or early wake event detected In order to fix the above issue, this patch forces to set initial wol state to disabled as default. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-29net: ethernet: ave: Add suspend/resume supportKunihiko Hayashi1-0/+44
This patch introduces suspend and resume functions to ave driver. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-1/+1
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: socionext: refactor netsec_alloc_dring()Ilias Apalodimas1-8/+3
return -ENOMEM directly instead of assigning it in a variable Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: socionext: different approach on DMAIlias Apalodimas1-99/+128
Current driver dynamically allocates an skb and maps it as DMA Rx buffer. In order to prepare for upcoming XDP changes, let's introduce a different allocation scheme. Buffers are allocated dynamically and mapped into hardware. During the Rx operation the driver uses build_skb() to produce the necessary buffers for the network stack. This change increases performance ~15% on 64b packets with smmu disabled and ~5% with smmu enabled Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Reset tx queue in ndo_stopMasahisa Kojima1-0/+3
We observed that packets and bytes count are not reset when user performs interface down. Eventually, tx queue is exhausted and packets will not be sent out. To avoid this problem, resets tx queue in ndo_stop. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Add dummy PHY register read in phy_write()Masahisa Kojima1-2/+16
There is a compatibility issue between RTL8211E implemented in Developerbox and netsec ethernet controller IP. Our MDIO controller stops MDC clock right after the write access, but RTL8211E expects MDC clock must be kept toggling for several clock cycle with MDIO high before entering the IDLE state. Without keeping clock after write access, write access is not correctly handled and register is not updated. To meet this requirement, netsec driver needs to issue dummy read(e.g. read PHYID1(offset 0x2) register) right after write access, to keep MDC clock. We think this compatibility issue is a problem specific to our MDIO controller and RTL8211E. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-23net: socionext: Stop PHY before resetting netsecMasahisa Kojima1-4/+15
In ndo_stop, driver resets the netsec ethernet controller IP. When the netsec IP is reset, HW running mode turns to NRM mode and driver has to wait until this mode transition completes. But mode transition to NRM will not complete if the PHY is in normal operation state. Netsec IP requires PHY is in power down state when it is reset. This modification stops the PHY before resetting netsec. Together with this modification, phy_addr is stored in netsec_priv structure because ndev->phydev is not yet ready in ndo_init. Fixes: 533dd11a12f6 ("net: socionext: Add Synquacer NetSec driver") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Signed-off-by: Yoshitoyo Osaki <osaki.yoshitoyo@socionext.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+4
Conflicts were easy to resolve using immediate context mostly, except the cls_u32.c one where I simply too the entire HEAD chunk. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-11net: socionext: clear rx irq correctlyIlias Apalodimas1-1/+4
commit 63ae7949e94a ("net: socionext: Use descriptor info instead of MMIO reads on Rx") removed constant mmio reads from the driver and started using a descriptor field to check if packet should be processed. This lead the napi rx handler being constantly called while no packets needed processing and ksoftirq getting 100% cpu usage. Issue one mmio read to clear the irq correcty after processing packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-01net: phy: Add helper for advertise to lcl valueAndrew Lunn1-4/+1
Add a helper to convert the local advertising to an LCL capabilities, which is then used to resolve pause flow control settings. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-17net: socionext: Fix two sleep-in-atomic-context bugs in ave_rxfifo_reset()Jia-Ju Bai1-2/+2
The driver may sleep with holding a spinlock. The function call paths (from bottom to top) in Linux-4.17 are: [FUNC] usleep_range drivers/net/ethernet/socionext/sni_ave.c, 892: usleep_range in ave_rxfifo_reset drivers/net/ethernet/socionext/sni_ave.c, 932: ave_rxfifo_reset in ave_irq_handler [FUNC] usleep_range drivers/net/ethernet/socionext/sni_ave.c, 888: usleep_range in ave_rxfifo_reset drivers/net/ethernet/socionext/sni_ave.c, 932: ave_rxfifo_reset in ave_irq_handler To fix these bugs, usleep_range() is replaced with udelay(). These bugs are found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for set_pauseparam for Asym PauseAndrew Lunn1-10/+1
ethtool can be used to enable/disable pause. Add a helper to configure the PHY when asym pause is supported. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper for MACs which support asym pauseAndrew Lunn1-1/+2
Rather than have the MAC drivers manipulate phydev members to indicate they support Asym Pause, add a helper function. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use phy_set_max_speed() to limit advertised speedAndrew Lunn1-4/+2
Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: socionext: Increase descriptors to 256Ilias Apalodimas1-3/+2
Increasing descriptors to 256 from 128 and adjusting the NAPI weight to 64 increases performace on Rx by ~20% on 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-11net: socionext: Use descriptor info instead of MMIO reads on RxIlias Apalodimas1-15/+10
MMIO reads for remaining packets in queue occur (at least)twice per invocation of netsec_process_rx(). We can use the packet descriptor to identify if it's owned by the hardware and break out, avoiding the more expensive MMIO read operations. This has a ~2% increase on the pps of the Rx path when tested with 64byte packets Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-05net: socionext: remove redundant pointer ndevColin Ian King1-2/+0
Pointer ndev is being assigned but is never used hence it is redundant and can be removed. Cleans up clang warning: warning: variable 'ndev' set but not used [-Wunused-but-set-variable] Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-12treewide: kzalloc() -> kcalloc()Kees Cook1-1/+1
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.