aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/common.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08net: stmmac: Fix RX packet size > 8191Thor Thayer1-1/+2
Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu1-2/+2
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MAC related callbacks for XGMAC2Jose Abreu1-0/+3
Add the MAC related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add XGMAC 2.10 HWIF entryJose Abreu1-6/+8
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with empty callbacks which will be added in posterior patches. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: stmmac: Add Flexible PPS supportJose Abreu1-0/+2
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: stmmac: Add support for U32 TC filter using Flexible RX ParserJose Abreu1-0/+5
This adds support for U32 filter by using an HW only feature called Flexible RX Parser. This allow us to match any given packet field with a pattern and accept/reject or even route the packet to a specific DMA channel. Right now we only support acception or rejection of frame and we only support simple rules. Though, the Parser has the flexibility of jumping to specific rules as an if condition so complex rules can be established. This is only supported in GMAC5.10+. The following commands can be used to test this code: 1) Setup an ingress qdisk: # tc qdisc add dev eth0 handle ffff: ingress 2) Setup a filter (e.g. filter by IP): # tc filter add dev eth0 parent ffff: protocol ip u32 match ip \ src 192.168.0.3 skip_sw action drop In every tests performed we always used the "skip_sw" flag to make sure only the RX Parser was involved. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: stmmac: Implement logic to automatically select HW InterfaceJose Abreu1-26/+4
Move all the core version detection to a common place ("hwif.c") and implement a table which can be used to lookup the correct callbacks for each IP version. This simplifies the initialization flow of each IP version and eases future implementation of new IP versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_mode_ops to generic HW Interface HelpersJose Abreu1-12/+0
Switch stmmac_mode_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_hwtimestamp to generic HW Interface HelpersJose Abreu1-12/+0
Switch stmmac_hwtimestamp to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_ops to generic HW Interface HelpersJose Abreu1-70/+0
Switch stmmac_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_dma_ops to generic HW Interface HelpersJose Abreu1-50/+0
Switch stmmac_dma_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_desc_ops to generic HW Interface HelpersJose Abreu1-54/+1
Switch stmmac_desc_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: stmmac: Add support for DWMAC5 and implement Safety FeaturesJose Abreu1-0/+22
This adds initial suport for DWMAC5 and implements the Automotive Safety Package which is available from core version 5.10. The Automotive Safety Pacakge (also called Safety Features) offers us with error protection in the core by implementing ECC Protection in memories, on-chip data path parity protection, FSM parity and timeout protection and Application/CSR interface timeout protection. In case of an uncorrectable error we call stmmac_global_err() and reconfigure the whole core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: stmmac: Fix reception of Broadcom switches tagsFlorian Fainelli1-1/+1
Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-19net: stmmac: Fix bad RX timestamp extractionFredrik Hallenberg1-1/+1
As noted in dwmac4_wrback_get_rx_timestamp_status the timestamp is found in the context descriptor following the current descriptor. However the current code looks for the context descriptor in the current descriptor, which will always fail. Signed-off-by: Fredrik Hallenberg <megahallon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: stmmac: Disable flow ctrl for RX AVB queues and really enable TX AVB queuesJose Abreu1-2/+2
Flow control must be disabled for AVB enabled queues and TX AVB queues must be enabled by setting BIT(2) of TXQEN. Correct this by passing the queue mode to DMA callbacks and by checking in these functions wether we are in AVB performing the necessary adjustments. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-10-14net: stmmac: Use correct values in TQS/RQS fieldsJose Abreu1-1/+2
Currently we are using all the available fifo size in RQS and TQS fields. This will not work correctly in multi-queues IP's because total fifo size must be splitted to the enabled queues. Correct this by computing the available fifo size per queue and setting the right value in TQS and RQS fields. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: rework the speed selectionLABBE Corentin1-3/+5
The current stmmac_adjust_link() part which handle speed have some if (has_platform) code and my dwmac-sun8i will add more of them. So we need to handle better speed selection. Moreover the struct link member speed and port are hard to guess their purpose. And their unique usage are to be combined for writing speed. So this patch replace speed/port by simpler speed10/speed100/speed1000/speed_mask variables. In dwmac4_core_init and dwmac1000_core_init, port/speed value was used directly without using the struct link. This patch convert also their usage to speedxxx. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel1-1/+1
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: stmmac: add set_mac to the stmmac_opsLABBE Corentin1-0/+2
Two different set_mac functions exists but stmmac_dwmac4_set_mac() is only used for enabling and never for disabling. So on dwmac4, the MAC RX/TX is never disabled. This patch add a generic function pointer set_mac() to stmmac_ops and replace all call to stmmac_set_mac/stmmac_dwmac4_set_mac by a call to this pointer. Since dwmac4_ops is const, set_mac cannot be modified after, and so dwmac4_ops is duplioacted like dwmac4_dma_ops. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: RX queue routing configurationJoao Pinto1-0/+17
This patch adds the configuration of RX queues' routing. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: TX and RX queue priority configurationJoao Pinto1-0/+4
This patch adds the configuration of RX and TX queues' priority. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: dma channel init prepared for multiple queuesJoao Pinto1-0/+8
This patch prepares the DMA initialization process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx and tx ring length prepared for multiple queuesJoao Pinto1-2/+2
This patch prepares tx and rx ring length configuration for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx watchdog config prepared for multiple queuesJoao Pinto1-1/+1
This patch adds rx watchdog configuration for all queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma interrupt treatment for multiple queuesJoao Pinto1-1/+1
This patch prepares DMA interrupts treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: rx/tx dma start/stop prepared for multiple queuesJoao Pinto1-4/+4
This patch prepares the RX/TX DMA stop/start process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: enable/disable dma irq prepared for multiple queuesJoao Pinto1-2/+2
This patch prepares the DMA IRQ enable/disable process for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-15net: stmmac: prepare dma op mode config for multiple queuesJoao Pinto1-0/+3
This patch prepares DMA Operation Mode configuration for multiple queues. The work consisted on breaking the DMA operation Mode configuration function into RX and TX scope and adapting its mechanism in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configuration of CBS in case of a TX AVB queueJoao Pinto1-0/+4
This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mac debug prepared for multiple queuesJoao Pinto1-1/+2
This patch prepares mac debug dump for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: prepare irq_status for mtlJoao Pinto1-0/+2
This patch prepares mac irq status treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: flow_ctrl functions adapted to mtlJoao Pinto1-1/+1
This patch adapts flow_ctrl function to prepare it for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mapping mtl rx to dma channelJoao Pinto1-0/+2
This patch adds the functionality of RX queue to dma channel mapping based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mtl rx queue enabled as dcb or avbJoao Pinto1-1/+1
This patch introduces the enabling of RX queues as DCB or as AVB based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure tx queue weightJoao Pinto1-0/+3
This patch adds TX queues weight programming. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure mtl rx and tx algorithmsJoao Pinto1-0/+4
This patch adds the RX and TX scheduling algorithms programming. It introduces the multiple queues configuration function (stmmac_mtl_configuration) in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: Parse FIFO sizes from feature registersThierry Reding1-0/+3
New version of this core encode the FIFO sizes in one of the feature registers. Use these sizes as default, but still allow device tree to override them for backwards compatibility. Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-24net: stmmac: unify registers dumps methodsLABBE Corentin1-2/+2
The stmmac driver have two methods for registers dumps: via ethtool and at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly. This patch convert all dump_regs() function from "printing regs" to "fill the reg_space used by ethtool". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: stmmac: rename rx_crc to rx_crc_errorsLABBE Corentin1-1/+1
The ethtool stat counter rx_crc from stmmac is mis-named, the name seems to speak about the number of RX CRC done, but in fact it is about errors. This patch rename it to rx_crc_errors, just like the same ifconfig counter. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: stmmac: remove freesoftware addressLABBE Corentin1-4/+0
This patch fix the checkpatch warning about free software address. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: stmmac: fix the typo on MAC_RNABLE_RXLABBE Corentin1-1/+1
the define MAC_RNABLE_RX have a typo, rename it to MAC_ENABLE_RX Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09stmmac: adding DT parameter for LPI tx clock gatingjpinto1-1/+2
This patch adds a new parameter to the stmmac DT: snps,en-tx-lpi-clockgating. It was ported from synopsys/dwc_eth_qos.c and it is useful if lpi tx clock gating is needed by stmmac users also. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29stmmac: enable rx queuesjpinto1-0/+5
When the hardware is synthesized with multiple queues, all queues are disabled for default. This patch adds the rx queues configuration. This patch was successfully tested in a Synopsys QoS Reference design. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: stmmac: simplify the common DMA init APINiklas Cassel1-2/+2
Use struct stmmac_dma_cfg *dma_cfg as an argument rather than using all the struct members as individual arguments. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: stmmac: unify mdio functionsLABBE Corentin1-0/+6
stmmac_mdio_{read|write} and stmmac_mdio_{read|write}_gmac4 are not enought different for being split. The only differences between thoses two functions are shift/mask for addr/reg/clk_csr. This patch introduce a per platform set of variable for setting thoses shift/mask and unify mdio read and write functions. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-29stmmac: fix comments, make debug output consistentPavel Machek1-0/+1
Fix comments, add some new, and make debugfs output consistent. Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15stmmac: fix PTP type ethtool statsGiuseppe CAVALLARO1-8/+11
This patch fixes the ethtool stats for PTP frames; previous version does not take care about some message types: i.e. announce, management and signaling. It also provided a broken statistic in case of "No PTP message received". Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15stmmac: fix PTP support for GMAC4Giuseppe CAVALLARO1-2/+3
Due to bad management of the descriptors, when use ptp4l, kernel panics as shown below: ----------------------------------------------------------- Unable to handle kernel NULL pointer dereference at virtual address 000001ac ... Internal error: Oops: 17 [#1] SMP ARM ... Hardware name: STi SoC with Flattened Device Tree task: c0c05e80 task.stack: c0c00000 PC is at dwmac4_wrback_get_tx_timestamp_status+0x0/0xc LR is at stmmac_tx_clean+0x2f8/0x4d4 ----------------------------------------------------------- In case of GMAC4 the extended descriptor pointers were used for getting the timestamp. These are NULL for this HW, and the normal ones must be used. The PTP also had problems on this chip due to the bad register management and issues on the algo adopted to setup the PTP and getting the timestamp values from the descriptors. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12stmmac: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-1/+1
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.