aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-06-04net: stmmac: Add Flexible PPS supportJose Abreu1-0/+1
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: stmmac: Add support for U32 TC filter using Flexible RX ParserJose Abreu1-0/+1
This adds support for U32 filter by using an HW only feature called Flexible RX Parser. This allow us to match any given packet field with a pattern and accept/reject or even route the packet to a specific DMA channel. Right now we only support acception or rejection of frame and we only support simple rules. Though, the Parser has the flexibility of jumping to specific rules as an if condition so complex rules can be established. This is only supported in GMAC5.10+. The following commands can be used to test this code: 1) Setup an ingress qdisk: # tc qdisc add dev eth0 handle ffff: ingress 2) Setup a filter (e.g. filter by IP): # tc filter add dev eth0 parent ffff: protocol ip u32 match ip \ src 192.168.0.3 skip_sw action drop In every tests performed we always used the "skip_sw" flag to make sure only the RX Parser was involved. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: stmmac: Implement logic to automatically select HW InterfaceJose Abreu1-29/+12
Move all the core version detection to a common place ("hwif.c") and implement a table which can be used to lookup the correct callbacks for each IP version. This simplifies the initialization flow of each IP version and eases future implementation of new IP versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net: stmmac: Disable ACS Feature for GMAC >= 4Jose Abreu1-7/+0
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30net: stmmac: Add support for DWMAC5 and implement Safety FeaturesJose Abreu1-1/+38
This adds initial suport for DWMAC5 and implements the Automotive Safety Package which is available from core version 5.10. The Automotive Safety Pacakge (also called Safety Features) offers us with error protection in the core by implementing ECC Protection in memories, on-chip data path parity protection, FSM parity and timeout protection and Application/CSR interface timeout protection. In case of an uncorrectable error we call stmmac_global_err() and reconfigure the whole core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-20net: stmmac: rename dwmac4_tx_queue_routing() to match realityNiklas Cassel1-3/+3
Looking at dwmac4_tx_queue_routing(), it is obvious that it sets up rx queue routing. Rename dwmac4_tx_queue_routing() to dwmac4_rx_queue_routing() to better match reality. Fixes: abe80fdc6ee6 ("net: stmmac: RX queue routing configuration") Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: remove redundant enable of PMT irqNiklas Cassel1-2/+1
For dwmac4, GMAC_INT_DEFAULT_ENABLE already includes GMAC_INT_PMT_EN, so it is redundant to check if hw->pmt is set, and if so, setting the bit again. For dwmac1000, GMAC_INT_DEFAULT_MASK does not include GMAC_INT_DISABLE_PMT, so it is redundant to check if hw->pmt is set, and if so, clearing an already cleared bit. Improve code readability by removing this redundant code. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: rename GMAC_INT_DEFAULT_MASK for dwmac4Niklas Cassel1-2/+2
GMAC_INT_DEFAULT_MASK is written to the interrupt enable register. In previous versions of the IP (e.g. dwmac1000), this register was instead an interrupt mask register. To improve clarity and reflect reality, rename GMAC_INT_DEFAULT_MASK to GMAC_INT_DEFAULT_ENABLE. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-09net: stmmac: discard disabled flags in interrupt status registerNiklas Cassel1-2/+4
The interrupt status register in both dwmac1000 and dwmac4 ignores interrupt enable (for dwmac4) / interrupt mask (for dwmac1000). Therefore, if we want to check only the bits that can actually trigger an irq, we have to filter the interrupt status register manually. Commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status register") fixed this for dwmac1000. Fix the same issue for dwmac4. Just like commit 0a764db10337 ("stmmac: Discard masked flags in interrupt status register"), this makes sure that we do not get spurious link up/link down prints. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-22net: stmmac: Fix reception of Broadcom switches tagsFlorian Fainelli1-1/+11
Broadcom tags inserted by Broadcom switches put a 4 byte header after the MAC SA and before the EtherType, which may look like some sort of 0 length LLC/SNAP packet (tcpdump and wireshark do think that way). With ACS enabled in stmmac the packets were truncated to 8 bytes on reception, whereas clearing this bit allowed normal reception to occur. In order to make that possible, we need to pass a net_device argument to the different core_init() functions and we are dependent on the Broadcom tagger padding packets correctly (which it now does). To be as little invasive as possible, this is only done for gmac1000 when the network device is DSA-enabled (netdev_uses_dsa() returns true). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-11-14net: stmmac: fix LPI transitioning for dwmac4Niklas Cassel1-0/+19
The LPI transitioning logic in stmmac_main uses priv->tx_path_in_lpi_mode to enter/exit LPI. However, priv->tx_path_in_lpi_mode is assigned using the return value from host_irq_status(). So for dwmac4, priv->tx_path_in_lpi_mode was always false, so stmmac_tx_clean() would always try to put us in eee mode, and stmmac_xmit() would never take us out of eee mode. To fix this, make host_irq_status() read and return the LPI irq status also for dwmac4. This also increments the existing LPI counters, so that ethtool --statistics shows LPI transitions also for dwmac4. For dwmac1000, irqs are enabled/disabled using the register named "Interrupt Mask Register", and thus setting a bit disables that specific irq. For dwmac4 the matching register is named "MAC_Interrupt_Enable", and thus setting a bit enables that specific irq. Looking at dwmac1000_core.c, the irqs that are always enabled are: LPI and PMT. Looking at dwmac4_core.c, the irqs that are always enabled are: PMT. To be able to read the LPI irq status, we need to enable the LPI irq also for dwmac4. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-28net: stmmac: dwmac4: Re-enable MAC Rx before powering downEd Blake1-0/+7
Re-enable the MAC receiver by setting CONFIG_RE before powering down, as instructed in section 6.3.5.1 of [1]. Without this the MAC fails to receive WoL packets and never wakes up. [1] DWC Ethernet QoS Databook 4.10a October 2014 Signed-off-by: Ed Blake <ed.blake@sondrel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-13net: stmmac: make const array route_possibilities staticColin Ian King1-1/+1
Don't populate array route_possibilities on the stack but make it static const. Makes the object code a little smaller by 85 bytes: Before: text data bss dec hex filename 9901 2448 0 12349 303d dwmac4_core.o After: text data bss dec hex filename 9760 2504 0 12264 2fe8 dwmac4_core.o Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-25net-next: stmmac: rework the speed selectionLABBE Corentin1-11/+15
The current stmmac_adjust_link() part which handle speed have some if (has_platform) code and my dwmac-sun8i will add more of them. So we need to handle better speed selection. Moreover the struct link member speed and port are hard to guess their purpose. And their unique usage are to be combined for writing speed. So this patch replace speed/port by simpler speed10/speed100/speed1000/speed_mask variables. In dwmac4_core_init and dwmac1000_core_init, port/speed value was used directly without using the struct link. This patch convert also their usage to speedxxx. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-24net: stmmac: add set_mac to the stmmac_opsLABBE Corentin1-2/+37
Two different set_mac functions exists but stmmac_dwmac4_set_mac() is only used for enabling and never for disabling. So on dwmac4, the MAC RX/TX is never disabled. This patch add a generic function pointer set_mac() to stmmac_ops and replace all call to stmmac_set_mac/stmmac_dwmac4_set_mac by a call to this pointer. Since dwmac4_ops is const, set_mac cannot be modified after, and so dwmac4_ops is duplioacted like dwmac4_dma_ops. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: RX queue routing configurationJoao Pinto1-0/+34
This patch adds the configuration of RX queues' routing. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: TX and RX queue priority configurationJoao Pinto1-0/+37
This patch adds the configuration of RX and TX queues' priority. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configuration of CBS in case of a TX AVB queueJoao Pinto1-2/+44
This patch adds the configuration of the AVB Credit-Based Shaper. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mac debug prepared for multiple queuesJoao Pinto1-51/+56
This patch prepares mac debug dump for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: prepare irq_status for mtlJoao Pinto1-15/+25
This patch prepares mac irq status treatment for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: flow_ctrl functions adapted to mtlJoao Pinto1-7/+13
This patch adapts flow_ctrl function to prepare it for multiple queues. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mapping mtl rx to dma channelJoao Pinto1-0/+25
This patch adds the functionality of RX queue to dma channel mapping based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: mtl rx queue enabled as dcb or avbJoao Pinto1-2/+6
This patch introduces the enabling of RX queues as DCB or as AVB based on configuration. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure tx queue weightJoao Pinto1-0/+12
This patch adds TX queues weight programming. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-12net: stmmac: configure mtl rx and tx algorithmsJoao Pinto1-0/+48
This patch adds the RX and TX scheduling algorithms programming. It introduces the multiple queues configuration function (stmmac_mtl_configuration) in stmmac_main. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-24net: stmmac: unify registers dumps methodsLABBE Corentin1-9/+3
The stmmac driver have two methods for registers dumps: via ethtool and at init (if NETIF_MSG_HW is enabled). It is better to keep only one method, ethtool, since the other was ugly. This patch convert all dump_regs() function from "printing regs" to "fill the reg_space used by ethtool". Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-22net: stmicro: fix LS field mask in EEE configurationjpinto1-1/+1
This patch fixes the LS mask when setting EEE timer. LS field is 10 bits long and not 11 as currently. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Reported-By: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-01-09stmmac: adding DT parameter for LPI tx clock gatingjpinto1-1/+5
This patch adds a new parameter to the stmmac DT: snps,en-tx-lpi-clockgating. It was ported from synopsys/dwc_eth_qos.c and it is useful if lpi tx clock gating is needed by stmmac users also. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Reviewed-by: Lars Persson <larper@axis.com> Acked-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29stmmac: adding EEE to GMAC4jpinto1-0/+59
This patch adds Energy Efficiency Ethernet to GMAC4. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-29stmmac: enable rx queuesjpinto1-0/+12
When the hardware is synthesized with multiple queues, all queues are disabled for default. This patch adds the rx queues configuration. This patch was successfully tested in a Synopsys QoS Reference design. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-03net: stmmac: unify mdio functionsLABBE Corentin1-0/+6
stmmac_mdio_{read|write} and stmmac_mdio_{read|write}_gmac4 are not enought different for being split. The only differences between thoses two functions are shift/mask for addr/reg/clk_csr. This patch introduce a per platform set of variable for setting thoses shift/mask and unify mdio read and write functions. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18stmmac: fix PWRDWN into the PMT register for global unicast.Giuseppe CAVALLARO1-1/+1
MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28drivers: net: stmmac: add port selection programmingGiuseppe CAVALLARO1-0/+15
In case of SGMII more, for example when a MAC2MAC connection is needed, the port selection bits (inside the MAC configuration registers) have to be programmed according to the link selected. So the patch adds a new DT parameter to pass the port selection and to programmed related PCS and CORE to use it. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28drivers: net: stmmac: rework core ISR to better manage PCS and PMTGiuseppe CAVALLARO1-1/+7
By default, all gmac cores disable the PCS block and always enable the PMT. Note that this is done in a different way by 3.x and 4.x cores. With this rework, PCS and PMT interrupt masks can be driven by parameters now moved inside the mac_device_info structure and the settings follow what the HW capability register reports. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-28drivers: net: stmmac: reworking the PCS code.Giuseppe CAVALLARO1-29/+44
The 3.xx and 4.xx synopsys gmacs have a very similar PCS embedded module and they share almost the same registers: for example: AN_Control, AN_Status, AN_Advertisement, AN_Link_Partner_Ability, AN_Expansion, TBI_Extended_Status. Just the RGMII/SMII Control/Status register differs. So This patch aims to reorganize and enhance the PCS support. It removes the existent support from the dwmac1000/dwmac4_core.c moving basic PCS functions inside a new file called: stmmac_pcs.h. The patch also reviews the available APIs to be better shared among different hardware and easily enhanced to support new features. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-09stmmac: fix parameter to dwmac4_set_umac_addr()Ben Dooks1-1/+1
The dwmac4_set_umac_addr() takes a struct mac_device_info as the first parameter, but is being passed a ioaddr instead from dwmac4_set_filter(). Fix the warning/bug by changing the first parameter. drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces) drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: expected struct mac_device_info *hw drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: got void [noderef] <asn:2>*ioaddr Note, only compile tested this as do not have any hardware with it in. Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-02stmmac: add GMAC4 core supportAlexandre TORGUE1-0/+407
This is the initial support for GMAC4 that includes the main callbacks to setup the core module: including Csum, basic filtering, mac address and interrupt (MMC, MTL, PMT) No LPI added. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.