aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/hwif.h (follow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-13net: stmmac: tc: Add support for ETF Scheduler using TBSJose Abreu1-0/+5
Adds the support for ETF scheduler using TBS feature which is available in XGMAC and QoS IPs. Changes from v2: - Fix checkpatch issues (Jakub) - Use the TBS bitfield Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-01-13net: stmmac: Initial support for TBSJose Abreu1-0/+7
Adds the initial hooks for TBS support. This needs a 32 byte descriptor in order for it to work with current HW. Adds all the logic for Enhanced Descriptors in main core but no HW related logic for now. Changes from v2: - Use bitfield for TBS status / support (Jakub) - Remove unneeded cache alignment (Jakub) - Fix checkpatch issues Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2019-12-18net: stmmac: Add Frame Preemption support using TAPRIO APIJose Abreu1-0/+4
Adds the support for Frame Preemption using TAPRIO API. This works along with EST feature and allows to select if preemptable traffic shall be sent during specific queues opening time. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Integrate EST with TAPRIO scheduler APIJose Abreu1-0/+5
Now that we have the EST code for XGMAC and QoS we can use it with the TAPRIO scheduler. Integrate it into the main driver and use the API to configure the EST feature. Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Add basic EST support for GMAC5+Jose Abreu1-0/+5
Adds the support for EST in GMAC5+ cores. This feature allows to offload scheduling of queues opening time to the IP. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: stmmac: Let TX and RX interrupts be independently enabled/disabledJose Abreu1-2/+4
By using this mechanism we can get rid of the not so nice method of scheduling TX NAPI when the RX was scheduled. No bandwidth reduction was seen with this change. Changes from v1: - Remove useless comment (Jakub) - Do not bind the TX clean to NAPI budget (Jakub) Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Lots of overlapping changes and parallel additions, stuff like that. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-16net: stmmac: Use the correct style for SPDX License IdentifierNishad Kamdar1-1/+1
This patch corrects the SPDX License Identifier style in header files related to STMicroelectronics based Multi-Gigabit Ethernet driver. For C header files Documentation/process/license-rules.rst mandates C-like comments (opposed to C source files where C++ style should be used). Changes made by using a script provided by Joe Perches here: https://lkml.org/lkml/2019/2/7/46. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-11net: stmmac: Fix sparse warningJose Abreu1-1/+1
The VID is converted to le16 so the variable must be __le16 type. Reported-by: kbuild test robot <lkp@intel.com> Fixes: c7ab0b8088d7 ("net: stmmac: Fallback to VLAN Perfect filtering if HASH is not available") Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: stmmac: Fallback to VLAN Perfect filtering if HASH is not availableJose Abreu1-1/+1
If VLAN Hash Filtering is not available we can fallback to perfect filtering instead. Let's implement this in XGMAC and GMAC cores and let the user use this filter. VLAN VID=0 always passes filter so we check if more than 2 VLANs are created and return proper error code if so because perfect filtering only supports 1 VID at a time. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: xgmac: Implement ARP OffloadJose Abreu1-0/+3
Implement the ARP Offload feature in XGMAC cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net: stmmac: Implement L3/L4 Filters using TC FlowerJose Abreu1-0/+16
Implement filters for Layer 3 and Layer 4 using TC Flower API. Add the corresponding callbacks in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add support for VLAN Insertion OffloadJose Abreu1-0/+10
Adds the logic to insert a given VLAN ID in a packet. This is offloaded to HW and its descriptor based. For now, only XGMAC implements the necessary callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add support for SA Insertion/Replacement in XGMAC coresJose Abreu1-0/+7
Add the support for Source Address Insertion and Replacement in XGMAC cores. Two methods are supported: Descriptor based and register based. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Add Split Header support and enable it in XGMAC coresJose Abreu1-0/+9
Add the support for Split Header feature in the RX path and enable it in XGMAC cores. This does not impact neither beneficts bandwidth but it does reduces CPU usage because without the feature all the entire packet is memcpy'ed, while that with the feature only the header is. With Split Header disabled 'perf stat -d' gives: 86870.624945 task-clock (msec) # 0.429 CPUs utilized 1073352 context-switches # 0.012 M/sec 1 cpu-migrations # 0.000 K/sec 213 page-faults # 0.002 K/sec 327113872376 cycles # 3.766 GHz (62.53%) 56618161216 instructions # 0.17 insn per cycle (75.06%) 10742205071 branches # 123.658 M/sec (75.36%) 584309242 branch-misses # 5.44% of all branches (75.19%) 17594787965 L1-dcache-loads # 202.540 M/sec (74.88%) 4003773131 L1-dcache-load-misses # 22.76% of all L1-dcache hits (74.89%) 1313301468 LLC-loads # 15.118 M/sec (49.75%) 355906510 LLC-load-misses # 27.10% of all LL-cache hits (49.92%) With Split Header enabled 'perf stat -d' gives: 49324.456539 task-clock (msec) # 0.245 CPUs utilized 2542387 context-switches # 0.052 M/sec 1 cpu-migrations # 0.000 K/sec 213 page-faults # 0.004 K/sec 177092791469 cycles # 3.590 GHz (62.30%) 68555756017 instructions # 0.39 insn per cycle (75.16%) 12697019382 branches # 257.418 M/sec (74.81%) 442081897 branch-misses # 3.48% of all branches (74.79%) 20337958358 L1-dcache-loads # 412.330 M/sec (75.46%) 3820210140 L1-dcache-load-misses # 18.78% of all L1-dcache hits (75.35%) 1257719198 LLC-loads # 25.499 M/sec (49.73%) 685543923 LLC-load-misses # 54.51% of all LL-cache hits (49.86%) Changes from v2: - Reword commit message (Jakub) Changes from v1: - Add performance info (David) - Add misssing dma_sync_single_for_device() Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-17net: stmmac: Get correct timestamp values from XGMACJose Abreu1-0/+4
TX Timestamp in XGMAC comes from MAC instead of descriptors. Implement this in a new callback. Also, RX Timestamp in XGMAC must be cheked against corruption and we need a barrier to make sure that descriptor fields are read correctly. Changes from v2: - Rework return code check (Jakub) Changes from v1: - Rework the get timestamp function (David) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement VLAN Hash Filtering in XGMACJose Abreu1-0/+5
Implement the VLAN Hash Filtering feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: Implement RSS and enable it in XGMAC coreJose Abreu1-0/+11
Implement the RSS functionality and add the corresponding callbacks in XGMAC core. Changes from v1: - Do not use magic constants (Jakub) - Use ethtool_rxfh_indir_default() (Jakub) Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-08net: stmmac: xgmac: Implement MMC countersJose Abreu1-0/+1
Implement the MMC counters feature in XGMAC core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-09net: stmmac: Fix descriptors address being in > 32 bits address spaceJose Abreu1-2/+2
Commit a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC"), introduced support for > 32 bits addressing in XGMAC but the conversion of descriptors to dma_addr_t was left out. As some devices assing coherent memory in regions > 32 bits we need to set lower and upper value of descriptors address when initializing DMA channels. Luckly, this was working for me because I was assigning CMA to < 4GB address space for performance reasons. Fixes: a993db88d17d ("net: stmmac: Enable support for > 32 Bits addressing in XGMAC") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24net: stmmac: Switch MMC functions to HWIF callbacksJose Abreu1-0/+17
XGMAC has a different MMC module. Lets use HWIF callbacks for MMC module so that correct callbacks are automatically selected. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-24net: stmmac: Add MAC loopback callback to HWIFJose Abreu1-0/+4
In preparation for the addition of selftests support for stmmac we add a new callback to HWIF that can be used to set the controller in loopback mode. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-31net: stmmac: use correct DMA buffer size in the RX descriptorAaro Koskinen1-1/+1
We always program the maximum DMA buffer size into the receive descriptor, although the allocated size may be less. E.g. with the default MTU size we allocate only 1536 bytes. If somebody sends us a bigger frame, then memory may get corrupted. Fix by using exact buffer sizes. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add descriptor related callbacks for XGMAC2Jose Abreu1-0/+1
Add the descriptor related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add DMA related callbacks for XGMAC2Jose Abreu1-0/+1
Add the DMA related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add MAC related callbacks for XGMAC2Jose Abreu1-0/+1
Add the MAC related callbacks for the new IP block XGMAC2. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-03Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+3
Simple overlapping changes in stmmac driver. Adjust skb_gro_flush_final_remcsum function signature to make GRO list changes in net-next, as per Stephen Rothwell's example merge resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-30net: stmmac: Add support for CBS QDISCJose Abreu1-0/+8
This adds support for CBS reconfiguration using the TC application. A new callback was added to TC ops struct and another one to DMA ops to reconfigure the channel mode. Tested in GMAC5.10. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28net: stmmac: Set DMA buffer size in HWJose Abreu1-0/+3
This is clearly a bug. We need to set the DMA buffer size in the HW otherwise corruption can occur when receiving packets. This is probably not occuring because of small MTU values and because HW has a default value internally (which currently is bigger than default buffer size). Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04net: stmmac: Add Flexible PPS supportJose Abreu1-0/+7
This adds support for Flexible PPS output (which is equivalent to per_out output of PTP subsystem). Tested using an oscilloscope and the following commands: 1) Start PTP4L: # ptp4l -A -4 -H -m -i eth0 & 2) Set Flexible PPS frequency: # echo <idx> <ts> <tns> <ps> <pns> > /sys/class/ptp/ptpX/period Where, ts/tns is start time and ps/pns is period time, and ptpX is ptp of eth0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code get skbuff addressJose Abreu1-0/+4
Stop using if conditions depending on the GMAC version for getting the descriptor skbuff address and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize set_rx_owner()Jose Abreu1-1/+1
Currently an if condition is used to select the correct callback to set rx_onwer in descriptor. Lets keep this simple and always use the same callback. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize the use of dma_init_* callbacksJose Abreu1-1/+1
Instead of relying on the GMAC version for choosing if we need to use dma_init or dma_init_{rx/tx}_chan callback, lets uniformize this and always use the dma_init_{rx/tx}_chan callbacks. While at it, fix the use of dma_init_chan callback, which shall be called for as many channels as the max of rx/tx channels. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Move PTP and MMC base address calculation to hwif.cJose Abreu1-0/+5
PTP and MMC modules base address can depend on the GMAC version. As this is HW specific lets move this base address calculation to hwif.c. Also, add an entry in the HW table so that we can specify the module offset. This can later be extended to more modules, if deemed necessary. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Uniformize the use of dma_{rx/tx}_mode callbacksJose Abreu1-6/+0
Instead of relying on the GMAC version for choosing if we need to use dma_{rx/tx}_mode or just dma_mode callback lets uniformize this and always use the dma_{rx/tx}_mode callbacks. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code clear the descriptorJose Abreu1-0/+4
Stop using if conditions depending on the GMAC version for clearing the descriptor and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-18net: stmmac: Let descriptor code set skbuff addressJose Abreu1-0/+4
Stop using if conditions depending on the GMAC version for setting the the descriptor skbuff address and use instead a helper implemented in the descriptor files. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-10net: stmmac: Add support for U32 TC filter using Flexible RX ParserJose Abreu1-2/+23
This adds support for U32 filter by using an HW only feature called Flexible RX Parser. This allow us to match any given packet field with a pattern and accept/reject or even route the packet to a specific DMA channel. Right now we only support acception or rejection of frame and we only support simple rules. Though, the Parser has the flexibility of jumping to specific rules as an if condition so complex rules can be established. This is only supported in GMAC5.10+. The following commands can be used to test this code: 1) Setup an ingress qdisk: # tc qdisc add dev eth0 handle ffff: ingress 2) Setup a filter (e.g. filter by IP): # tc filter add dev eth0 parent ffff: protocol ip u32 match ip \ src 192.168.0.3 skip_sw action drop In every tests performed we always used the "skip_sw" flag to make sure only the RX Parser was involved. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23net: stmmac: Implement logic to automatically select HW InterfaceJose Abreu1-0/+17
Move all the core version detection to a common place ("hwif.c") and implement a table which can be used to lookup the correct callbacks for each IP version. This simplifies the initialization flow of each IP version and eases future implementation of new IP versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_mode_ops to generic HW Interface HelpersJose Abreu1-0/+27
Switch stmmac_mode_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_hwtimestamp to generic HW Interface HelpersJose Abreu1-0/+25
Switch stmmac_hwtimestamp to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_ops to generic HW Interface HelpersJose Abreu1-0/+138
Switch stmmac_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_dma_ops to generic HW Interface HelpersJose Abreu1-0/+106
Switch stmmac_dma_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_desc_ops to generic HW Interface HelpersJose Abreu1-0/+125
Switch stmmac_desc_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.