aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/ring_mode.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2018-11-08net: stmmac: Fix RX packet size > 8191Thor Thayer1-1/+1
Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-22net: stmmac: Set OWN bit for jumbo framesThor Thayer1-2/+2
Ping with Jumbo packet does not reply and get a watchdog timeout [ 46.059616] ------------[ cut here ]------------ [ 46.064268] NETDEV WATCHDOG: eth0 (socfpga-dwmac): transmit queue 0 timed out [ 46.071471] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x2cc/0x2d8 [ 46.079708] Modules linked in: [ 46.082761] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-00115-gc262be665854-dirty #264 [ 46.091082] Hardware name: SoCFPGA Stratix 10 SoCDK (DT) [ 46.096377] pstate: 20000005 (nzCv daif -PAN -UAO) [ 46.101152] pc : dev_watchdog+0x2cc/0x2d8 [ 46.105149] lr : dev_watchdog+0x2cc/0x2d8 [ 46.109144] sp : ffff00000800bd80 [ 46.112447] x29: ffff00000800bd80 x28: ffff80007a9b4940 [ 46.117744] x27: 00000000ffffffff x26: ffff80007aa183b0 [ 46.123040] x25: 0000000000000001 x24: 0000000000000140 [ 46.128336] x23: ffff80007aa1839c x22: ffff80007aa17fb0 [ 46.133632] x21: ffff80007aa18000 x20: ffff0000091a7000 [ 46.138927] x19: 0000000000000000 x18: ffffffffffffffff [ 46.144223] x17: 0000000000000000 x16: 0000000000000000 [ 46.149519] x15: ffff0000091a96c8 x14: 07740775076f0720 [ 46.154814] x13: 07640765076d0769 x12: 0774072007300720 [ 46.160110] x11: 0765077507650775 x10: 0771072007740769 [ 46.165406] x9 : 076d0773076e0761 x8 : 077207740720073a [ 46.170702] x7 : 072907630761076d x6 : ffff80007ff9a0c0 [ 46.175997] x5 : ffff80007ff9a0c0 x4 : 0000000000000002 [ 46.181293] x3 : 0000000000000000 x2 : ffff0000091ac180 [ 46.186589] x1 : e6a742ebe628e800 x0 : 0000000000000000 [ 46.191885] Call trace: [ 46.194326] dev_watchdog+0x2cc/0x2d8 [ 46.197980] call_timer_fn+0x20/0x78 [ 46.201544] expire_timers+0xa4/0xb0 [ 46.205108] run_timer_softirq+0xe4/0x198 [ 46.209107] __do_softirq+0x114/0x210 [ 46.212760] irq_exit+0xd0/0xd8 [ 46.215895] __handle_domain_irq+0x60/0xb0 [ 46.219977] gic_handle_irq+0x58/0xa8 [ 46.223628] el1_irq+0xb0/0x128 [ 46.226761] arch_cpu_idle+0x10/0x18 [ 46.230326] do_idle+0x1d4/0x288 [ 46.233544] cpu_startup_entry+0x24/0x28 [ 46.237457] secondary_start_kernel+0x17c/0x1c0 [ 46.241971] ---[ end trace 57048cd1372cd828 ]--- Inspection of queue showed Jumbo packets were not sent out. The ring Jumbo packet function needs to set the OWN bit so the packet is sent. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_mode_ops to generic HW Interface HelpersJose Abreu1-12/+12
Switch stmmac_mode_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-16net: stmmac: Switch stmmac_desc_ops to generic HW Interface HelpersJose Abreu1-9/+6
Switch stmmac_desc_ops to generic Hardware Interface Helpers instead of using hard-coded callbacks. This makes the code more readable and more flexible. No functional change. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-13net: stmmac: set total length of the packet to be transmitted in TDES3Niklas Cassel1-3/+6
Field FL/TPL in register TDES3 is not correctly set on GMAC4. TX appears to be functional on GMAC 4.10a even if this field is not set, however, to avoid relying on undefined behavior, set the length in TDES3. The field has a different meaning depending on if the TSE bit in TDES3 is set or not (TSO). However, regardless of the TSE bit, the field is not optional. The field is already set correctly when the TSE bit is set. Since there is no limit for the number of descriptors that can be used for a single packet, the field should be set to the sum of the buffers contained in: [<desc with First Descriptor bit set> ... <desc n> ... <desc with Last Descriptor bit set>], which should be equal to skb->len. Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-07net: stmmac: adding multiple buffers for TXJoao Pinto1-22/+24
This patch adds the structure stmmac_tx_queue which contains tx queues specific data (previously in stmmac_priv). Signed-off-by: Joao Pinto <jpinto@synopsys.com> Tested-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-30Revert "net: stmmac: enable multiple buffers"LABBE Corentin1-24/+22
The commit aff3d9eff843 ("net: stmmac: enable multiple buffers") breaks numerous boards. while some patch exists for fixing some of it, dwmac-sunxi is still broken with it. Since this patch is very huge, it will be better to split it in smaller part. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-03-21net: stmmac: enable multiple buffersJoao Pinto1-22/+24
This patch creates 2 new structures (stmmac_tx_queue and stmmac_rx_queue) in include/linux/stmmac.h, enabling that each RX and TX queue has its own buffers and data. Signed-off-by: Joao Pinto <jpinto@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-08net: stmmac: remove freesoftware addressLABBE Corentin1-4/+0
This patch fix the checkpatch warning about free software address. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: stmmac: change dma descriptors to __le32Michael Weiser1-18/+21
The stmmac driver does not take into account the processor may be big endian when writing the DMA descriptors. This causes the ethernet interface not to be initialised correctly when running a big-endian kernel. Change the descriptors for DMA to use __le32 and ensure they are suitably swapped before writing. Tested successfully on the Cubieboard2. Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02stmmac: first frame prep at the end of xmit routineGiuseppe Cavallaro1-2/+0
This patch is to fill the first descriptor just before granting the DMA engine so at the end of the xmit. The patch takes care about the algorithm adopted to mitigate the interrupts, then it fixes the last segment in case of no fragments. Moreover, this new implementation does not pass any "ter" field when prepare the descriptors because this is not necessary. The patch also details the memory barrier in the xmit. As final results, this patch guarantees the same performances but fixing a case if small datagram are sent. In fact, this kind of test is impacted if no coalesce is done. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02stmmac: optimize tx desc managementGiuseppe Cavallaro1-4/+3
This patch is to optimize the way to manage the TDES inside the xmit function. When prepare the frame, some settings (e.g. OWN bit) can be merged. This has been reworked to improve the tx performances. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02stmmac: add is_jumbo field to dma dataGiuseppe Cavallaro1-1/+10
Optimize tx_clean by avoiding a des3 read in stmmac_clean_desc3(). In ring mode, TX, des3 seems only used when xmit a jumbo frame. In case of normal descriptors, it may also be used for time stamping. Clean it in the above two case, without reading it. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02stmmac: add length field to dma dataGiuseppe Cavallaro1-0/+5
Currently, the code pulls out the length field when unmapping a buffer directly from the descriptor. This will result in an uncached read to a dma_alloc_coherent() region. There is no need to do this, so this patch simply puts the value directly into a data structure which will hit the cache. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-02stmmac: review RX/TX ring managementGiuseppe Cavallaro1-3/+4
This patch is to rework the ring management now optimized. The indexes into the ring buffer are always incremented, and the entry is accessed via doing a modulo to find the "real" position in the ring. It is inefficient, modulo is an expensive operation. The formula [(entry + 1) & (size - 1)] is now adopted on a ring that is power-of-2 in size. Then, the number of elements cannot be set by command line but it is fixed. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-29stmmac: fix dma api misuseGiuseppe CAVALLARO1-4/+11
Enabling DMA_API_DEBUG, warnings are reported at runtime because the device driver frees DMA memory with wrong functions and it does not call dma_mapping_error after mapping dma memory. The first problem is fixed by of introducing a flag that helps us keeping track which mapping technique was used, so that we can use the right API for unmap. This approach was inspired by the e1000 driver, which uses a similar technique. Signed-off-by: Andre Draszik <andre.draszik@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Denis Kirjanov <kda@linux-powerpc.org> Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-11stmmac: fix chained modeGiuseppe CAVALLARO1-5/+4
This patch is to fix the chain mode that was broken and generated a panic. This patch reviews the chain/ring modes now shaing the same structure and taking care about the pointers and callbacks. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-19net: stmmac: fix NULL pointer dereference in stmmac_get_tx_hwtstampdamuzi0001-1/+1
When timestamping is enabled, stmmac_tx_clean will call stmmac_get_tx_hwtstamp to get tx TS. But the skb can be NULL because the last of its tx_skbuff is NULL if this packet frame is filled in more than one descriptors. To fix the issue, change the code: - Store TX skb to the tx_skbuff[] of frame's last segment. - Check skb is not NULL in stmmac_get_tx_hwtstamp. Signed-off-by: Bruce Liu <damuzi000@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-09net: stmmac: Fixed the condition of extend_desc for jumbo frameByungho An1-2/+11
This patch fixed the condition of extend_desc for jumbo frame. There is no check routine for extend_desc in the stmmac_jumbo_frm function. Even though extend_desc is set if dma_tx is used instead of dma_etx. It causes kernel panic. Signed-off-by: Byungho An <bh74.an@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-08stmmac: code tidy-upGiuseppe CAVALLARO1-1/+1
This patch tidies up the code. I have run Linden (and verified with checkpatch) many part of the driver trying to reorganize some sections respecting the codying-style rules in the points where it was not done. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: add IEEE PTPv1 and PTPv2 support.Rayagond Kokatanur1-5/+8
This patch enhances the stmmac driver to support IEEE 1588-2002 PTP (Precision Time Protocol) version 1 and IEEE 1588-2008 PPT version 2. Precision Time Protocol(PTP),which enables precise synchronization of clocks in measurement and control systems implemented with technologies such as network communication,local computing, & distributed objects. Both PTPv1 and PTPv2 is selected at run-time using the HW capability register. The PTPv1 TimeStamp support can be used on chips that have the normal descriptor structures and PTPv2 TimeStamp support can be used on chips that have the Extended descriptors(DES4-5-6-7). All such sanity checks are done and verified by using HW capability register. V2: in this version the ethtool support has been included in this patch; Koptions have been completely removed (previously added to select PTP and PTPv2). PTPv1 and PTPv2 is now added in a single patch instead of two patches. get_timestamp() and get_systemtime() L/H have been combined into single APIs. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: add tx_skbuff_dma to save descriptors used by PTPRayagond Kokatanur1-0/+3
This patch adds a new pointer variable called "tx_skbuff_dma" to private data structure. This variable will holds the physical address of packet to be transmitted & same will be used to free/unmap the memory once the corresponding packet is transmitted by device. Prior to this patch the descriptor buffer pointer(ie des2) itself was being used for freeing/unmapping the buffer memory. But in case PTP v1 with normal descriptor the field(des2) will be overwritten by device with timestamp value, hence driver will loose the buffer pointer to be freed/unmapped. Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-26stmmac: reorganize chain/ring modes removing KoptionsGiuseppe CAVALLARO1-15/+9
Previously we had two Koptions to decide if the stmmac had to use either a ring or a chain to manage its descriptors. This patch removes the Kernel configuration options and it allow us to use the chain mode by passing a module option. Ring mode continues to be the default. Also with this patch, it will be easier to validate the driver built and guarantee that all the two modes always compile fine. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09stmmac: Fix for higher mtu size handlingDeepak Sikri1-1/+2
For the higher mtu sizes requiring the buffer size greater than 8192, the buffers are sent or received using multiple dma descriptors/ same descriptor with option of multi buffer handling. It was observed during tests that the driver was missing on data packets during the normal ping operations if the data buffers being used catered to jumbo frame handling. The memory barrriers are added in between preparation of dma descriptors in the jumbo frame handling path to ensure all instructions before enabling the dma are complete. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-19stmmac: add CHAINED descriptor mode support (V4)Giuseppe CAVALLARO1-0/+126
This patch enhances the STMMAC driver to support CHAINED mode of descriptor. STMMAC supports DMA descriptor to operate both in dual buffer(RING) and linked-list(CHAINED) mode. In RING mode (default) each descriptor points to two data buffer pointers whereas in CHAINED mode they point to only one data buffer pointer. In CHAINED mode each descriptor will have pointer to next descriptor in the list, hence creating the explicit chaining in the descriptor itself, whereas such explicit chaining is not possible in RING mode. First version of this work has been done by Rayagond. Then the patch has been reworked avoiding ifdef inside the C code. A new header file has been added to define all the functions needed for managing enhanced and normal descriptors. In fact, these have to be specialized according to the ring/chain usage. Two new C files have been also added to implement the helper routines needed to manage: jumbo frames, chain and ring setup (i.e. desc3). Signed-off-by: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>