aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2020-01-07io_uring: remove punt of short reads to async contextJens Axboe1-12/+0
We currently punt any short read on a regular file to async context, but this fails if the short read is due to running into EOF. This is especially problematic since we only do the single prep for commands now, as we don't reset kiocb->ki_pos. This can result in a 4k read on a 1k file returning zero, as we detect the short read and then retry from async context. At the time of retry, the position is now 1k, and we end up reading nothing, and hence return 0. Instead of trying to patch around the fact that short reads can be legitimate and won't succeed in case of retry, remove the logic to punt a short read to async context. Simply return it. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-01-07i40iw: Remove setting of VMA private data and use rdma_user_mmap_ioShiraz Saleem1-8/+6
vm_ops is now initialized in ib_uverbs_mmap() with the recent rdma mmap API changes. Earlier it was done in rdma_umap_priv_init() which would not be called unless a driver called rdma_user_mmap_io() in its mmap. i40iw does not use the rdma_user_mmap_io API but sets the vma's vm_private_data to a driver object. This now conflicts with the vm_op rdma_umap_close as priv pointer points to the i40iw driver object instead of the private data setup by core when rdma_user_mmap_io is called. This leads to a crash in rdma_umap_close with a mmap put being called when it should not have. Remove the redundant setting of the vma private_data in i40iw as it is not used. Also move i40iw over to use the rdma_user_mmap_io API. This gives the extra protection of having the mappings zapped when the context is detsroyed. BUG: unable to handle page fault for address: 0000000100000001 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 6 PID: 9528 Comm: rping Kdump: loaded Not tainted 5.5.0-rc4+ #117 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./Q87M-D2H, BIOS F7 01/17/2014 RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] RSP: 0018:ffffb340c04c7c38 EFLAGS: 00010202 RAX: 00000000ffffffff RBX: ffff9308e7be2a00 RCX: 000000000000cec0 RDX: 0000000000000000 RSI: 0000000000000006 RDI: 0000000100000001 RBP: ffff9308dc7641f0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: ffffffff8d4414d8 R12: ffff93075182c780 R13: 0000000000000001 R14: ffff93075182d2a8 R15: ffff9308e2ddc840 FS: 0000000000000000(0000) GS:ffff9308fdc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000100000001 CR3: 00000002e0412004 CR4: 00000000001606e0 Call Trace: rdma_umap_close+0x40/0x90 [ib_uverbs] remove_vma+0x43/0x80 exit_mmap+0xfd/0x1b0 mmput+0x6e/0x130 do_exit+0x290/0xcc0 ? get_signal+0x152/0xc40 do_group_exit+0x46/0xc0 get_signal+0x1bd/0xc40 ? prepare_to_wait_event+0x97/0x190 do_signal+0x36/0x630 ? remove_wait_queue+0x60/0x60 ? __audit_syscall_exit+0x1d9/0x290 ? rcu_read_lock_sched_held+0x52/0x90 ? kfree+0x21c/0x2e0 exit_to_usermode_loop+0x4f/0xc3 do_syscall_64+0x1ed/0x270 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fae715a81fd Code: Bad RIP value. RSP: 002b:00007fae6e163cb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000001 RAX: fffffffffffffe00 RBX: 00007fae6e163d30 RCX: 00007fae715a81fd RDX: 0000000000000010 RSI: 00007fae6e163cf0 RDI: 0000000000000003 RBP: 00000000013413a0 R08: 00007fae68000000 R09: 0000000000000017 R10: 0000000000000001 R11: 0000000000000293 R12: 00007fae680008c0 R13: 00007fae6e163cf0 R14: 00007fae717c9804 R15: 00007fae6e163ed0 CR2: 0000000100000001 ---[ end trace b33d58d3a06782cb ]--- RIP: 0010:rdma_user_mmap_entry_put+0xa/0x30 [ib_core] Fixes: b86deba977a9 ("RDMA/core: Move core content from ib_uverbs to ib_core") Link: https://lore.kernel.org/r/20200107162223.1745-1-shiraz.saleem@intel.com Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-01-07drm/amdgpu: add DRIVER_SYNCOBJ_TIMELINE to amdgpuChunming Zhou1-1/+2
Can expose it now that the khronos has exposed the vlk extension. Signed-off-by: Chunming Zhou <david1.zhou@amd.com> Reviewed-by: Flora Cui <Flora.Cui@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-01-07drm/amd/display: Reduce HDMI pixel encoding if max clock is exceededThomas Anderson1-22/+23
For high-res (8K) or HFR (4K120) displays, using uncompressed pixel formats like YCbCr444 would exceed the bandwidth of HDMI 2.0, so the "interesting" modes would be disabled, leaving only low-res or low framerate modes. This change lowers the pixel encoding to 4:2:2 or 4:2:0 if the max TMDS clock is exceeded. Verified that 8K30 and 4K120 are now available and working with a Samsung Q900R over an HDMI 2.0b link from a Radeon 5700. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Thomas Anderson <thomasanderson@google.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2020-01-07Revert "drm/amdgpu: Set no-retry as default."Alex Deucher1-2/+2
This reverts commit 51bfac71cade386966791a8db87a5912781d249f. This causes stability issues on some raven boards. Revert for now until a proper fix is completed. Bug: https://gitlab.freedesktop.org/drm/amd/issues/934 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206017 Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2020-01-07iommu/dma: fix variable 'cookie' set but not usedQian Cai1-3/+0
The commit c18647900ec8 ("iommu/dma: Relax locking in iommu_dma_prepare_msi()") introduced a compliation warning, drivers/iommu/dma-iommu.c: In function 'iommu_dma_prepare_msi': drivers/iommu/dma-iommu.c:1206:27: warning: variable 'cookie' set but not used [-Wunused-but-set-variable] struct iommu_dma_cookie *cookie; ^~~~~~ Fixes: c18647900ec8 ("iommu/dma: Relax locking in iommu_dma_prepare_msi()") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Unlink device if failed to add to groupJon Derrick1-3/+10
If the device fails to be added to the group, make sure to unlink the reference before returning. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Fixes: 39ab9555c2411 ("iommu: Add sysfs bindings for struct iommu_device") Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu: Remove device link to group on failureJon Derrick1-0/+1
This adds the missing teardown step that removes the device link from the group when the device addition fails. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Fixes: 797a8b4d768c5 ("iommu: Handle default domain attach failure") Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07iommu/vt-d: Fix adding non-PCI devices to Intel IOMMUPatrick Steinhardt1-1/+8
Starting with commit fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices"), we now probe DMA-capable ACPI name space devices. On Dell XPS 13 9343, which has an Intel LPSS platform device INTL9C60 enumerated via ACPI, this change leads to the following warning: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1 at pci_device_group+0x11a/0x130 CPU: 1 PID: 1 Comm: swapper/0 Tainted: G T 5.5.0-rc3+ #22 Hardware name: Dell Inc. XPS 13 9343/0310JH, BIOS A20 06/06/2019 RIP: 0010:pci_device_group+0x11a/0x130 Code: f0 ff ff 48 85 c0 49 89 c4 75 c4 48 8d 74 24 10 48 89 ef e8 48 ef ff ff 48 85 c0 49 89 c4 75 af e8 db f7 ff ff 49 89 c4 eb a5 <0f> 0b 49 c7 c4 ea ff ff ff eb 9a e8 96 1e c7 ff 66 0f 1f 44 00 00 RSP: 0000:ffffc0d6c0043cb0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffffa3d1d43dd810 RCX: 0000000000000000 RDX: ffffa3d1d4fecf80 RSI: ffffa3d12943dcc0 RDI: ffffa3d1d43dd810 RBP: ffffa3d1d43dd810 R08: 0000000000000000 R09: ffffa3d1d4c04a80 R10: ffffa3d1d4c00880 R11: ffffa3d1d44ba000 R12: 0000000000000000 R13: ffffa3d1d4383b80 R14: ffffa3d1d4c090d0 R15: ffffa3d1d4324530 FS: 0000000000000000(0000) GS:ffffa3d1d6700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 000000000460a001 CR4: 00000000003606e0 Call Trace: ? iommu_group_get_for_dev+0x81/0x1f0 ? intel_iommu_add_device+0x61/0x170 ? iommu_probe_device+0x43/0xd0 ? intel_iommu_init+0x1fa2/0x2235 ? pci_iommu_init+0x52/0xe7 ? e820__memblock_setup+0x15c/0x15c ? do_one_initcall+0xcc/0x27e ? kernel_init_freeable+0x169/0x259 ? rest_init+0x95/0x95 ? kernel_init+0x5/0xeb ? ret_from_fork+0x35/0x40 ---[ end trace 28473e7abc25b92c ]--- DMAR: ACPI name space devices didn't probe correctly The bug results from the fact that while we now enumerate ACPI devices, we aren't able to handle any non-PCI device when generating the device group. Fix the issue by implementing an Intel-specific callback that returns `pci_device_group` only if the device is a PCI device. Otherwise, it will return a generic device group. Fixes: fa212a97f3a3 ("iommu/vt-d: Probe DMA-capable ACPI name space devices") Signed-off-by: Patrick Steinhardt <ps@pks.im> Cc: stable@vger.kernel.org # v5.3+ Acked-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2020-01-07drm/fb-helper: Round up bits_per_pixel if possibleGeert Uytterhoeven1-1/+6
When userspace requests a video mode parameter value that is not supported, frame buffer device drivers should round it up to a supported value, if possible, instead of just rejecting it. This allows applications to quickly scan for supported video modes. Currently this rule is not followed for the number of bits per pixel, causing e.g. "fbset -depth N" to fail, if N is smaller than the current number of bits per pixel. Fix this by returning an error only if bits per pixel is too large, and setting it to the current value otherwise. See also Documentation/fb/framebuffer.rst, Section 2 (Programmer's View of /dev/fb*"). Fixes: 865afb11949e5bf4 ("drm/fb-helper: reject any changes to the fbdev") Cc: stable@vger.kernel.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191230132734.4538-1-geert+renesas@glider.be
2020-01-07drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware modelChen-Yu Tsai2-3/+13
In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.") it was assumed that all TCON variants support a minimum divider of 1 if only DCLK was used. However, the oldest generation of hardware only supports minimum divider of 4 if only DCLK is used. If a divider of 1 was used on this old hardware, some scrolling artifact would appear. A divider of 2 seemed OK, but a divider of 3 had artifacts as well. Set the minimum divider when outputing to parallel RGB based on the hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20) hardware, and a minimum of 1 for the rest. A value is not set for the TCON variants lacking channel 0. This fixes the scrolling artifacts seen on my A13 tablet. Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200107070113.28951-1-wens@kernel.org
2020-01-07drm/i915/dp: Disable Port sync mode correctly on teardownManasi Navare1-6/+1
While clearing the Ports ync mode enable and master select bits we need to clear the register completely instead of using disable masks v3: * Remove reg variable (Matt) v2: * Just write 0 to the reg (Ville) * Rebase Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/5 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Fixes: 51528afe7c5e ("drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence") Signed-off-by: Manasi Navare <manasi.d.navare@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191228031204.10189-3-manasi.d.navare@intel.com (cherry picked from commit a3d9382bd439e7be1858abc3d5f014dd55913448) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07drm/i915: Add Wa_1407352427:icl,ehlMatt Roper2-0/+7
The workaround database now indicates we need to disable psdunit clock gating as well. v3: - Rebase on top of other workarounds that have landed. - Restrict cc:stable tag to 5.2+ since that's when ICL was first officially supported. Bspec: 32354 Bspec: 33450 Bspec: 33451 Suggested-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: stable@vger.kernel.org # v5.2+ Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191231190713.1549533-1-matthew.d.roper@intel.com (cherry picked from commit 1cd21a7c5679015352e8a6f46813aced51d71bb8) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07drm/i915: Add Wa_1408615072 and Wa_1407596294 to icl,ehlMatt Roper2-1/+11
Workaround database indicates we should disable clock gating of both the vsunit and hsunit. Bspec: 33450 Bspec: 33451 Cc: stable@kernel.vger.org Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191224012026.3157766-3-matthew.d.roper@intel.com Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit b9cf9dac3dac4c1d2a47d34f30ec53c0423cecf8) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07drm/i915/gt: Restore coarse power gatingChris Wilson1-2/+4
The coarse power gating was disabled as part of commit 2248a28384fe ("drm/i915/gen8+: Add RC6 CTX corruption WA") as a prelude to recover from the context corruption; the power gating itself has no direct impact on the RC6 context corruption. However, that recovery scheme was never implemented due to difficult corner cases, and so we no longer need to keep the power gating disabled. Fixes: 2248a28384fe ("drm/i915/gen8+: Add RC6 CTX corruption WA") Closes: https://gitlab.freedesktop.org/drm/intel/issues/846 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: Jon Bloomfield <jon.bloomfield@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191231122708.4025916-1-chris@chris-wilson.co.uk (cherry picked from commit 32f408ac3e5d95781f52328a09e5409b01255841) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07drm/i915/gt: Do not restore invalid RS stateChris Wilson1-20/+11
Only restore valid resource streamer state from the context image, i.e. avoid restoring if we know the image is invalid. Closes: https://gitlab.freedesktop.org/drm/intel/issues/446 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191229183153.3719869-4-chris@chris-wilson.co.uk Cc: stable@vger.kernel.org (cherry picked from commit ecfcd2da335816516dc27434a65899a77886d80a) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07um: Implement copy_thread_tlsAmanieu d'Antras5-12/+10
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-um@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200104123928.1048822-1-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07clone3: ensure copy_thread_tls is implementedAmanieu d'Antras1-0/+10
copy_thread implementations handle CLONE_SETTLS by reading the TLS value from the registers containing the syscall arguments for clone. This doesn't work with clone3 since the TLS value is passed in clone_args instead. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-8-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07xtensa: Implement copy_thread_tlsAmanieu d'Antras2-4/+5
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-xtensa@linux-xtensa.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-7-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07riscv: Implement copy_thread_tlsAmanieu d'Antras2-3/+4
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-riscv@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-6-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07parisc: Implement copy_thread_tlsAmanieu d'Antras2-4/+5
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-parisc@vger.kernel.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-5-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07arm: Implement copy_thread_tlsAmanieu d'Antras2-3/+4
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Link: https://lore.kernel.org/r/20200102172413.654385-4-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07arm64: Implement copy_thread_tlsAmanieu d'Antras2-5/+6
This is required for clone3 which passes the TLS value through a struct rather than a register. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Acked-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20200102172413.654385-3-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07arm64: Move __ARCH_WANT_SYS_CLONE3 definition to uapi headersAmanieu d'Antras2-1/+1
Previously this was only defined in the internal headers which resulted in __NR_clone3 not being defined in the user headers. Signed-off-by: Amanieu d'Antras <amanieu@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: <stable@vger.kernel.org> # 5.3.x Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20200102172413.654385-2-amanieu@gmail.com Signed-off-by: Christian Brauner <christian.brauner@ubuntu.com>
2020-01-07gpiolib: acpi: Add honor_wakeup module-option + quirk mechanismHans de Goede1-1/+31
On some laptops enabling wakeup on the GPIO interrupts used for ACPI _AEI event handling causes spurious wakeups. This commit adds a new honor_wakeup option, defaulting to true (our current behavior), which can be used to disable wakeup on troublesome hardware to avoid these spurious wakeups. This is a workaround for an architectural problem with s2idle under Linux where we do not have any mechanism to immediately go back to sleep after wakeup events, other then for embedded-controller events using the standard ACPI EC interface, for details see: https://lore.kernel.org/linux-acpi/61450f9b-cbc6-0c09-8b3a-aff6bf9a0b3c@redhat.com/ One series of laptops which is not able to suspend without this workaround is the HP x2 10 Cherry Trail models, this commit adds a DMI based quirk which makes sets honor_wakeup to false on these models. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-3-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07gpiolib: acpi: Turn dmi_system_id table into a generic quirk tableHans de Goede1-4/+15
Turn the existing run_edge_events_on_boot_blacklist dmi_system_id table into a generic quirk table, storing the quirks in the driver_data ptr. This is a preparation patch for adding other types of (DMI based) quirks. Cc: stable@vger.kernel.org Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200105160357.97154-2-hdegoede@redhat.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07powercap: intel_rapl: add NULL pointer check to rapl_mmio_cpu_online()Harry Pan1-0/+3
RAPL MMIO support depends on the RAPL common driver. During CPU initialization rapl_mmio_cpu_online() is called via CPU hotplug to initialize the MMIO RAPL for the new CPU, but if that CPU is not present in the common RAPL driver's support list, rapl_defaults is NULL and the kernel crashes on an attempt to dereference it: [ 4.188566] BUG: kernel NULL pointer dereference, address: 0000000000000020 ...snip... [ 4.189555] RIP: 0010:rapl_add_package+0x223/0x574 [ 4.189555] Code: b5 a0 31 c0 49 8b 4d 78 48 01 d9 48 8b 0c c1 49 89 4c c6 10 48 ff c0 48 83 f8 05 75 e7 49 83 ff 03 75 15 48 8b 05 09 bc 18 01 <8b> 70 20 41 89 b6 0c 05 00 00 85 f6 75 1a 49 81 c6 18 9 [ 4.189555] RSP: 0000:ffffb3adc00b3d90 EFLAGS: 00010246 [ 4.189555] RAX: 0000000000000000 RBX: 0000000000000098 RCX: 0000000000000000 [ 4.267161] usb 1-1: New USB device found, idVendor=2109, idProduct=2812, bcdDevice= b.e0 [ 4.189555] RDX: 0000000000001000 RSI: 0000000000000000 RDI: ffff9340caafd000 [ 4.189555] RBP: ffffb3adc00b3df8 R08: ffffffffa0246e28 R09: ffff9340caafc000 [ 4.189555] R10: 000000000000024a R11: ffffffff9ff1f6f2 R12: 00000000ffffffed [ 4.189555] R13: ffff9340caa94800 R14: ffff9340caafc518 R15: 0000000000000003 [ 4.189555] FS: 0000000000000000(0000) GS:ffff9340ce200000(0000) knlGS:0000000000000000 [ 4.189555] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 4.189555] CR2: 0000000000000020 CR3: 0000000302c14001 CR4: 00000000003606f0 [ 4.189555] Call Trace: [ 4.189555] ? __switch_to_asm+0x40/0x70 [ 4.189555] rapl_mmio_cpu_online+0x47/0x64 [ 4.189555] ? rapl_mmio_write_raw+0x33/0x33 [ 4.281059] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.189555] cpuhp_invoke_callback+0x29f/0x66f [ 4.189555] ? __schedule+0x46d/0x6a0 [ 4.189555] cpuhp_thread_fun+0xb9/0x11c [ 4.189555] smpboot_thread_fn+0x17d/0x22f [ 4.297006] usb 1-1: Product: USB2.0 Hub [ 4.189555] ? cpu_report_death+0x43/0x43 [ 4.189555] kthread+0x137/0x13f [ 4.189555] ? cpu_report_death+0x43/0x43 [ 4.189555] ? kthread_blkcg+0x2e/0x2e [ 4.312951] usb 1-1: Manufacturer: VIA Labs, Inc. [ 4.189555] ret_from_fork+0x1f/0x40 [ 4.189555] Modules linked in: [ 4.189555] CR2: 0000000000000020 [ 4.189555] ---[ end trace 01bb812aabc791f4 ]--- To avoid that problem, check rapl_defaults NULL upfront and return an error code if it is NULL. [Note that it does not make sense to even try to allocate memory in that case, because it is not going to be used anyway.] Fixes: 555c45fe0d04 ("int340X/processor_thermal_device: add support for MMIO RAPL") Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Harry Pan <harry.pan@intel.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-01-07drm/i915: Limit audio CDCLK>=2*BCLK constraint back to GLK onlyKai Vehmanen1-2/+2
Revert changes done in commit f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms"). Audio drivers communicate with i915 over HDA bus multiple times during system boot-up and each of these transactions result in matching get_power/put_power calls to i915, and depending on the platform, a modeset change causing visible flicker. GLK is the only platform with minimum CDCLK significantly lower than BCLK, and thus for GLK setting a higher CDCLK is mandatory. For other platforms, minimum CDCLK is close but below 2*BCLK (e.g. on ICL, CDCLK=176.4kHz with BCLK=96kHz). Spec-wise the constraint should be set, but in practise no communication errors have been reported and the downside if set is the flicker observed at boot-time. Revert to old behaviour until better mechanism to manage probe-time clocks is available. The full CDCLK>=2*BCLK constraint is still enforced at pipe enable time in intel_crtc_compute_min_cdclk(). Bugzilla: https://gitlab.freedesktop.org/drm/intel/issues/913 Fixes: f6ec9483091f ("drm/i915: extend audio CDCLK>=2*BCLK constraint to more platforms") Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191231140007.31728-1-kai.vehmanen@linux.intel.com (cherry picked from commit 1ee48a61aa57dbdbc3cd2808d8b28df40d938e44) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07drm/i915/gt: Mark up virtual engine uabi_instanceChris Wilson1-0/+2
Be sure to initialise the uabi_instance on the virtual engine to the special invalid value, just in case we ever peek at it from the uAPI. Reported-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 750e76b4f9f6 ("drm/i915/gt: Move the [class][inst] lookup for engines onto the GT") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.4+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200106123921.2543886-1-chris@chris-wilson.co.uk (cherry picked from commit f75fc37b5e70b75f21550410f88e2379648120e2) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2020-01-07gpio: zynq: Fix for bug in zynq_gpio_restore_context APISwapna Manupati1-3/+5
This patch writes the inverse value of Interrupt Mask Status register into the Interrupt Enable register in zynq_gpio_restore_context API to fix the bug. Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume") Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: meson: Fix wrong shift value when get drive-strengthQianggui Song1-0/+1
In meson_pinconf_get_drive_strength, variable bit is calculated by meson_calc_reg_and_bit, this value is the offset from the first pin of a certain bank to current pin, while Meson SoCs use two bits for each pin to depict drive-strength. So a left shift by 1 should be done or node pinconf-pins shows wrong message. Fixes: 6ea3e3bbef37 ("pinctrl: meson: add support of drive-strength-microamp") Signed-off-by: Qianggui Song <qianggui.song@amlogic.com> Link: https://lore.kernel.org/r/20191226023734.9631-1-qianggui.song@amlogic.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07pinctrl: lochnagar: select GPIOLIBArnd Bergmann1-0/+1
In a rare randconfig build I came across one configuration that does not enable CONFIG_GPIOLIB, which is needed by lochnagar: ERROR: "devm_gpiochip_add_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_free" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_generic_request" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! ERROR: "gpiochip_get_data" [drivers/pinctrl/cirrus/pinctrl-lochnagar.ko] undefined! Add another 'select' like all other pinctrl drivers have. Fixes: 0548448b719a ("pinctrl: lochnagar: Add support for the Cirrus Logic Lochnagar") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20191218163701.171914-1-arnd@arndb.de Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-07drivers: thermal: tsens: Work with old DTBsAmit Kucheria1-0/+3
In order for the old DTBs to continue working, the new interrupt code must not return an error if interrupts are not defined. Don't return an error in case of -ENXIO. Fixes: 634e11d5b450a ("drivers: thermal: tsens: Add interrupt support") Suggested-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/cea3317c5d793db312064d68b261ad420a4a81b1.1576146898.git.amit.kucheria@linaro.org
2020-01-06net/mlx5: DR, Init lists that are used in rule's memberErez Shitrit1-0/+3
Whenever adding new member of rule object we attach it to 2 lists, These 2 lists should be initialized first. Fixes: 41d07074154c ("net/mlx5: DR, Expose steering rule functionality") Signed-off-by: Erez Shitrit <erezsh@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Fix hairpin RSS table sizeEli Cohen3-17/+17
Set hairpin table size to the corret size, based on the groups that would be created in it. Groups are laid out on the table such that a group occupies a range of entries in the table. This implies that the group ranges should have correspondence to the table they are laid upon. The patch cited below made group 1's size to grow hence causing overflow of group range laid on the table. Fixes: a795d8db2a6d ("net/mlx5e: Support RSS for IP-in-IP and IPv6 tunneled packets") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5: DR, No need for atomic refcount for internal SW steering resourcesYevgeny Kliteynik3-12/+14
No need for an atomic refcounter for the STE and hashtables. These are internal SW steering resources and they are always under domain mutex. This also fixes the following refcount error: refcount_t: addition on 0; use-after-free. WARNING: CPU: 9 PID: 3527 at lib/refcount.c:25 refcount_warn_saturate+0x81/0xe0 Call Trace: dr_table_init_nic+0x10d/0x110 [mlx5_core] mlx5dr_table_create+0xb4/0x230 [mlx5_core] mlx5_cmd_dr_create_flow_table+0x39/0x120 [mlx5_core] __mlx5_create_flow_table+0x221/0x5f0 [mlx5_core] esw_create_offloads_fdb_tables+0x180/0x5a0 [mlx5_core] ... Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities") Signed-off-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Reviewed-by: Alex Vesker <valex@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06Revert "net/mlx5: Support lockless FTE read lookups"Parav Pandit2-56/+15
This reverts commit 7dee607ed0e04500459db53001d8e02f8831f084. During cleanup path, FTE's parent node group is removed which is referenced by the FTE while freeing the FTE. Hence FTE's lockless read lookup optimization done in cited commit is not possible at the moment. Hence, revert the commit. This avoid below KAZAN call trace. [ 110.390896] BUG: KASAN: use-after-free in find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391048] Read of size 4 at addr ffff888c19e6d220 by task swapper/12/0 [ 110.391219] CPU: 12 PID: 0 Comm: swapper/12 Not tainted 5.5.0-rc1+ [ 110.391222] Hardware name: HP ProLiant DL380p Gen8, BIOS P70 08/02/2014 [ 110.391225] Call Trace: [ 110.391229] <IRQ> [ 110.391246] dump_stack+0x95/0xd5 [ 110.391307] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391320] print_address_description.constprop.5+0x20/0x320 [ 110.391379] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391435] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391441] __kasan_report+0x149/0x18c [ 110.391499] ? find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391504] kasan_report+0x12/0x20 [ 110.391511] __asan_report_load4_noabort+0x14/0x20 [ 110.391567] find_root.isra.14+0x56/0x60 [mlx5_core] [ 110.391625] del_sw_fte_rcu+0x4a/0x100 [mlx5_core] [ 110.391633] rcu_core+0x404/0x1950 [ 110.391640] ? rcu_accelerate_cbs_unlocked+0x100/0x100 [ 110.391649] ? run_rebalance_domains+0x201/0x280 [ 110.391654] rcu_core_si+0xe/0x10 [ 110.391661] __do_softirq+0x181/0x66c [ 110.391670] irq_exit+0x12c/0x150 [ 110.391675] smp_apic_timer_interrupt+0xf0/0x370 [ 110.391681] apic_timer_interrupt+0xf/0x20 [ 110.391684] </IRQ> [ 110.391695] RIP: 0010:cpuidle_enter_state+0xfa/0xba0 [ 110.391703] Code: 3d c3 9b b5 50 e8 56 75 6e fe 48 89 45 c8 0f 1f 44 00 00 31 ff e8 a6 94 6e fe 45 84 ff 0f 85 f6 02 00 00 fb 66 0f 1f 44 00 00 <45> 85 f6 0f 88 db 06 00 00 4d 63 fe 4b 8d 04 7f 49 8d 04 87 49 8d [ 110.391706] RSP: 0018:ffff888c23a6fce8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 [ 110.391712] RAX: dffffc0000000000 RBX: ffffe8ffff7002f8 RCX: 000000000000001f [ 110.391715] RDX: 1ffff11184ee6cb5 RSI: 0000000040277d83 RDI: ffff888c277365a8 [ 110.391718] RBP: ffff888c23a6fd40 R08: 0000000000000002 R09: 0000000000035280 [ 110.391721] R10: ffff888c23a6fc80 R11: ffffed11847485d0 R12: ffffffffb1017740 [ 110.391723] R13: 0000000000000003 R14: 0000000000000003 R15: 0000000000000000 [ 110.391732] ? cpuidle_enter_state+0xea/0xba0 [ 110.391738] cpuidle_enter+0x4f/0xa0 [ 110.391747] call_cpuidle+0x6d/0xc0 [ 110.391752] do_idle+0x360/0x430 [ 110.391758] ? arch_cpu_idle_exit+0x40/0x40 [ 110.391765] ? complete+0x67/0x80 [ 110.391771] cpu_startup_entry+0x1d/0x20 [ 110.391779] start_secondary+0x2f3/0x3c0 [ 110.391784] ? set_cpu_sibling_map+0x2500/0x2500 [ 110.391795] secondary_startup_64+0xa4/0xb0 [ 110.391841] Allocated by task 290: [ 110.391917] save_stack+0x21/0x90 [ 110.391921] __kasan_kmalloc.constprop.8+0xa7/0xd0 [ 110.391925] kasan_kmalloc+0x9/0x10 [ 110.391929] kmem_cache_alloc_trace+0xf6/0x270 [ 110.391987] create_root_ns.isra.36+0x58/0x260 [mlx5_core] [ 110.392044] mlx5_init_fs+0x5fd/0x1ee0 [mlx5_core] [ 110.392092] mlx5_load_one+0xc7a/0x3860 [mlx5_core] [ 110.392139] init_one+0x6ff/0xf90 [mlx5_core] [ 110.392145] local_pci_probe+0xde/0x190 [ 110.392150] work_for_cpu_fn+0x56/0xa0 [ 110.392153] process_one_work+0x678/0x1140 [ 110.392157] worker_thread+0x573/0xba0 [ 110.392162] kthread+0x341/0x400 [ 110.392166] ret_from_fork+0x1f/0x40 [ 110.392218] Freed by task 2742: [ 110.392288] save_stack+0x21/0x90 [ 110.392292] __kasan_slab_free+0x137/0x190 [ 110.392296] kasan_slab_free+0xe/0x10 [ 110.392299] kfree+0x94/0x250 [ 110.392357] tree_put_node+0x257/0x360 [mlx5_core] [ 110.392413] tree_remove_node+0x63/0xb0 [mlx5_core] [ 110.392469] clean_tree+0x199/0x240 [mlx5_core] [ 110.392525] mlx5_cleanup_fs+0x76/0x580 [mlx5_core] [ 110.392572] mlx5_unload+0x22/0xc0 [mlx5_core] [ 110.392619] mlx5_unload_one+0x99/0x260 [mlx5_core] [ 110.392666] remove_one+0x61/0x160 [mlx5_core] [ 110.392671] pci_device_remove+0x10b/0x2c0 [ 110.392677] device_release_driver_internal+0x1e4/0x490 [ 110.392681] device_driver_detach+0x36/0x40 [ 110.392685] unbind_store+0x147/0x200 [ 110.392688] drv_attr_store+0x6f/0xb0 [ 110.392693] sysfs_kf_write+0x127/0x1d0 [ 110.392697] kernfs_fop_write+0x296/0x420 [ 110.392702] __vfs_write+0x66/0x110 [ 110.392707] vfs_write+0x1a0/0x500 [ 110.392711] ksys_write+0x164/0x250 [ 110.392715] __x64_sys_write+0x73/0xb0 [ 110.392720] do_syscall_64+0x9f/0x3a0 [ 110.392725] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 7dee607ed0e0 ("net/mlx5: Support lockless FTE read lookups") Signed-off-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5: Move devlink registration before interfaces loadMichael Guralnik1-7/+9
Register devlink before interfaces are added. This will allow interfaces to use devlink while initalizing. For example, call mlx5_is_roce_enabled. Fixes: aba25279c100 ("net/mlx5e: Add TX reporter support") Signed-off-by: Michael Guralnik <michaelgur@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Always print health reporter message to dmesgEran Ben Elisha1-3/+4
In case a reporter exists, error message is logged only to the devlink tracer. The devlink tracer is a visibility utility only, which user can choose not to monitor. After cited patch, 3rd party monitoring tools that tracks these error message will no longer find them in dmesg, causing a regression. With this patch, error messages are also logged into the dmesg. Fixes: c50de4af1d63 ("net/mlx5e: Generalize tx reporter's functionality") Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-06net/mlx5e: Avoid duplicating rule destinationsDmytro Linkin1-1/+57
Following scenario easily break driver logic and crash the kernel: 1. Add rule with mirred actions to same device. 2. Delete this rule. In described scenario rule is not added to database and on deletion driver access invalid entry. Example: $ tc filter add dev ens1f0_0 ingress protocol ip prio 1 \ flower skip_sw \ action mirred egress mirror dev ens1f0_1 pipe \ action mirred egress redirect dev ens1f0_1 $ tc filter del dev ens1f0_0 ingress protocol ip prio 1 Dmesg output: [ 376.634396] mlx5_core 0000:82:00.0: mlx5_cmd_check:756:(pid 3439): DESTROY_FLOW_GROUP(0x934) op_mod(0x0) failed, status bad resource state(0x9), syndrome (0x563e2f) [ 376.654983] mlx5_core 0000:82:00.0: del_hw_flow_group:567:(pid 3439): flow steering can't destroy fg 89 of ft 3145728 [ 376.673433] kasan: CONFIG_KASAN_INLINE enabled [ 376.683769] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 376.695229] general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI [ 376.705069] CPU: 7 PID: 3439 Comm: tc Not tainted 5.4.0-rc5+ #76 [ 376.714959] Hardware name: Supermicro SYS-2028TP-DECTR/X10DRT-PT, BIOS 2.0a 08/12/2016 [ 376.726371] RIP: 0010:mlx5_del_flow_rules+0x105/0x960 [mlx5_core] [ 376.735817] Code: 01 00 00 00 48 83 eb 08 e8 28 d9 ff ff 4c 39 e3 75 d8 4c 8d bd c0 02 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 84 04 00 00 48 8d 7d 28 8b 9 d [ 376.761261] RSP: 0018:ffff888847c56db8 EFLAGS: 00010202 [ 376.770054] RAX: dffffc0000000000 RBX: ffff8888582a6da0 RCX: ffff888847c56d60 [ 376.780743] RDX: 0000000000000058 RSI: 0000000000000008 RDI: 0000000000000282 [ 376.791328] RBP: 0000000000000000 R08: fffffbfff0c60ea6 R09: fffffbfff0c60ea6 [ 376.802050] R10: fffffbfff0c60ea5 R11: ffffffff8630752f R12: ffff8888582a6da0 [ 376.812798] R13: dffffc0000000000 R14: ffff8888582a6da0 R15: 00000000000002c0 [ 376.823445] FS: 00007f675f9a8840(0000) GS:ffff88886d200000(0000) knlGS:0000000000000000 [ 376.834971] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 376.844179] CR2: 00000000007d9640 CR3: 00000007d3f26003 CR4: 00000000001606e0 [ 376.854843] Call Trace: [ 376.868542] __mlx5_eswitch_del_rule+0x49/0x300 [mlx5_core] [ 376.877735] mlx5e_tc_del_fdb_flow+0x6ec/0x9e0 [mlx5_core] [ 376.921549] mlx5e_flow_put+0x2b/0x50 [mlx5_core] [ 376.929813] mlx5e_delete_flower+0x5b6/0xbd0 [mlx5_core] [ 376.973030] tc_setup_cb_reoffload+0x29/0xc0 [ 376.980619] fl_reoffload+0x50a/0x770 [cls_flower] [ 377.015087] tcf_block_playback_offloads+0xbd/0x250 [ 377.033400] tcf_block_setup+0x1b2/0xc60 [ 377.057247] tcf_block_offload_cmd+0x195/0x240 [ 377.098826] tcf_block_offload_unbind+0xe7/0x180 [ 377.107056] __tcf_block_put+0xe5/0x400 [ 377.114528] ingress_destroy+0x3d/0x60 [sch_ingress] [ 377.122894] qdisc_destroy+0xf1/0x5a0 [ 377.129993] qdisc_graft+0xa3d/0xe50 [ 377.151227] tc_get_qdisc+0x48e/0xa20 [ 377.165167] rtnetlink_rcv_msg+0x35d/0x8d0 [ 377.199528] netlink_rcv_skb+0x11e/0x340 [ 377.219638] netlink_unicast+0x408/0x5b0 [ 377.239913] netlink_sendmsg+0x71b/0xb30 [ 377.267505] sock_sendmsg+0xb1/0xf0 [ 377.273801] ___sys_sendmsg+0x635/0x900 [ 377.312784] __sys_sendmsg+0xd3/0x170 [ 377.338693] do_syscall_64+0x95/0x460 [ 377.344833] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 377.352321] RIP: 0033:0x7f675e58e090 To avoid this, for every mirred action check if output device was already processed. If so - drop rule with EOPNOTSUPP error. Signed-off-by: Dmytro Linkin <dmitrolin@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Reviewed-by: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2020-01-07gpio: max77620: Add missing dependency on GPIOLIB_IRQCHIPDmitry Osipenko1-0/+1
Driver fails to compile in a minimized kernel's configuration because of the missing dependency on GPIOLIB_IRQCHIP. error: ‘struct gpio_chip’ has no member named ‘irq’ 44 | virq = irq_find_mapping(gpio->gpio_chip.irq.domain, offset); Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200106015154.12040-1-digetx@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-01-06bpf: Fix passing modified ctx to ld/abs/ind instructionDaniel Borkmann1-2/+7
Anatoly has been fuzzing with kBdysch harness and reported a KASAN slab oob in one of the outcomes: [...] [ 77.359642] BUG: KASAN: slab-out-of-bounds in bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.360463] Read of size 4 at addr ffff8880679bac68 by task bpf/406 [ 77.361119] [ 77.361289] CPU: 2 PID: 406 Comm: bpf Not tainted 5.5.0-rc2-xfstests-00157-g2187f215eba #1 [ 77.362134] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 77.362984] Call Trace: [ 77.363249] dump_stack+0x97/0xe0 [ 77.363603] print_address_description.constprop.0+0x1d/0x220 [ 77.364251] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365030] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.365860] __kasan_report.cold+0x37/0x7b [ 77.366365] ? bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.366940] kasan_report+0xe/0x20 [ 77.367295] bpf_skb_load_helper_8_no_cache+0x71/0x130 [ 77.367821] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.368278] ? mark_lock+0xa3/0x9b0 [ 77.368641] ? kvm_sched_clock_read+0x14/0x30 [ 77.369096] ? sched_clock+0x5/0x10 [ 77.369460] ? sched_clock_cpu+0x18/0x110 [ 77.369876] ? bpf_skb_load_helper_8+0xf0/0xf0 [ 77.370330] ___bpf_prog_run+0x16c0/0x28f0 [ 77.370755] __bpf_prog_run32+0x83/0xc0 [ 77.371153] ? __bpf_prog_run64+0xc0/0xc0 [ 77.371568] ? match_held_lock+0x1b/0x230 [ 77.371984] ? rcu_read_lock_held+0xa1/0xb0 [ 77.372416] ? rcu_is_watching+0x34/0x50 [ 77.372826] sk_filter_trim_cap+0x17c/0x4d0 [ 77.373259] ? sock_kzfree_s+0x40/0x40 [ 77.373648] ? __get_filter+0x150/0x150 [ 77.374059] ? skb_copy_datagram_from_iter+0x80/0x280 [ 77.374581] ? do_raw_spin_unlock+0xa5/0x140 [ 77.375025] unix_dgram_sendmsg+0x33a/0xa70 [ 77.375459] ? do_raw_spin_lock+0x1d0/0x1d0 [ 77.375893] ? unix_peer_get+0xa0/0xa0 [ 77.376287] ? __fget_light+0xa4/0xf0 [ 77.376670] __sys_sendto+0x265/0x280 [ 77.377056] ? __ia32_sys_getpeername+0x50/0x50 [ 77.377523] ? lock_downgrade+0x350/0x350 [ 77.377940] ? __sys_setsockopt+0x2a6/0x2c0 [ 77.378374] ? sock_read_iter+0x240/0x240 [ 77.378789] ? __sys_socketpair+0x22a/0x300 [ 77.379221] ? __ia32_sys_socket+0x50/0x50 [ 77.379649] ? mark_held_locks+0x1d/0x90 [ 77.380059] ? trace_hardirqs_on_thunk+0x1a/0x1c [ 77.380536] __x64_sys_sendto+0x74/0x90 [ 77.380938] do_syscall_64+0x68/0x2a0 [ 77.381324] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 77.381878] RIP: 0033:0x44c070 [...] After further debugging, turns out while in case of other helper functions we disallow passing modified ctx, the special case of ld/abs/ind instruction which has similar semantics (except r6 being the ctx argument) is missing such check. Modified ctx is impossible here as bpf_skb_load_helper_8_no_cache() and others are expecting skb fields in original position, hence, add check_ctx_reg() to reject any modified ctx. Issue was first introduced back in f1174f77b50c ("bpf/verifier: rework value tracking"). Fixes: f1174f77b50c ("bpf/verifier: rework value tracking") Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200106215157.3553-1-daniel@iogearbox.net
2020-01-06net: atlantic: remove duplicate entriesIgor Russkikh1-3/+0
Function entries were duplicated accidentally, removing the dups. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: loopback configuration in improper placeIgor Russkikh1-2/+2
Initial loopback configuration should be called earlier, before starting traffic on HW blocks. Otherwise depending on race conditions it could be kept disabled. Fixes: ea4b4d7fc106 ("net: atlantic: loopback tests via private flags") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: atlantic: broken link status on old fwIgor Russkikh1-3/+1
Last code/checkpatch cleanup did a copy paste error where code from firmware 3 API logic was moved to firmware 1 logic. This resulted in FW1.x users would never see the link state as active. Fixes: 7b0c342f1f67 ("net: atlantic: code style cleanup") Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06bpf: cgroup: prevent out-of-order release of cgroup bpfRoman Gushchin1-2/+9
Before commit 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") cgroup bpf structures were released with corresponding cgroup structures. It guaranteed the hierarchical order of destruction: children were always first. It preserved attached programs from being released before their propagated copies. But with cgroup auto-detachment there are no such guarantees anymore: cgroup bpf is released as soon as the cgroup is offline and there are no live associated sockets. It means that an attached program can be detached and released, while its propagated copy is still living in the cgroup subtree. This will obviously lead to an use-after-free bug. To reproduce the issue the following script can be used: #!/bin/bash CGROOT=/sys/fs/cgroup mkdir -p ${CGROOT}/A ${CGROOT}/B ${CGROOT}/A/C sleep 1 ./test_cgrp2_attach ${CGROOT}/A egress & A_PID=$! ./test_cgrp2_attach ${CGROOT}/B egress & B_PID=$! echo $$ > ${CGROOT}/A/C/cgroup.procs iperf -s & S_PID=$! iperf -c localhost -t 100 & C_PID=$! sleep 1 echo $$ > ${CGROOT}/B/cgroup.procs echo ${S_PID} > ${CGROOT}/B/cgroup.procs echo ${C_PID} > ${CGROOT}/B/cgroup.procs sleep 1 rmdir ${CGROOT}/A/C rmdir ${CGROOT}/A sleep 1 kill -9 ${S_PID} ${C_PID} ${A_PID} ${B_PID} On the unpatched kernel the following stacktrace can be obtained: [ 33.619799] BUG: unable to handle page fault for address: ffffbdb4801ab002 [ 33.620677] #PF: supervisor read access in kernel mode [ 33.621293] #PF: error_code(0x0000) - not-present page [ 33.622754] Oops: 0000 [#1] SMP NOPTI [ 33.623202] CPU: 0 PID: 601 Comm: iperf Not tainted 5.5.0-rc2+ #23 [ 33.625545] RIP: 0010:__cgroup_bpf_run_filter_skb+0x29f/0x3d0 [ 33.635809] Call Trace: [ 33.636118] ? __cgroup_bpf_run_filter_skb+0x2bf/0x3d0 [ 33.636728] ? __switch_to_asm+0x40/0x70 [ 33.637196] ip_finish_output+0x68/0xa0 [ 33.637654] ip_output+0x76/0xf0 [ 33.638046] ? __ip_finish_output+0x1c0/0x1c0 [ 33.638576] __ip_queue_xmit+0x157/0x410 [ 33.639049] __tcp_transmit_skb+0x535/0xaf0 [ 33.639557] tcp_write_xmit+0x378/0x1190 [ 33.640049] ? _copy_from_iter_full+0x8d/0x260 [ 33.640592] tcp_sendmsg_locked+0x2a2/0xdc0 [ 33.641098] ? sock_has_perm+0x10/0xa0 [ 33.641574] tcp_sendmsg+0x28/0x40 [ 33.641985] sock_sendmsg+0x57/0x60 [ 33.642411] sock_write_iter+0x97/0x100 [ 33.642876] new_sync_write+0x1b6/0x1d0 [ 33.643339] vfs_write+0xb6/0x1a0 [ 33.643752] ksys_write+0xa7/0xe0 [ 33.644156] do_syscall_64+0x5b/0x1b0 [ 33.644605] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix this by grabbing a reference to the bpf structure of each ancestor on the initialization of the cgroup bpf structure, and dropping the reference at the end of releasing the cgroup bpf structure. This will restore the hierarchical order of cgroup bpf releasing, without adding any operations on hot paths. Thanks to Josef Bacik for the debugging and the initial analysis of the problem. Fixes: 4bfc0bb2c60e ("bpf: decouple the lifetime of cgroup_bpf from cgroup itself") Reported-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Roman Gushchin <guro@fb.com> Acked-by: Song Liu <songliubraving@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-01-06firmware: tee_bnxt: Fix multiple call to tee_client_close_contextVikas Gupta1-1/+0
Fix calling multiple tee_client_close_context in case of shm allocation fails. Fixes: 246880958ac9 (“firmware: broadcom: add OP-TEE based BNXT f/w manager”) Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: dsa: mv88e6xxx: Preserve priority when setting CPU port.Andrew Lunn2-0/+6
The 6390 family uses an extended register to set the port connected to the CPU. The lower 5 bits indicate the port, the upper three bits are the priority of the frames as they pass through the switch, what egress queue they should use, etc. Since frames being set to the CPU are typically management frames, BPDU, IGMP, ARP, etc set the priority to 7, the reset default, and the highest. Fixes: 33641994a676 ("net: dsa: mv88e6xxx: Monitor and Management tables") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: ethernet: sxgbe: Rename Samsung to lowercaseKrzysztof Kozlowski2-2/+2
Fix up inconsistent usage of upper and lowercase letters in "Samsung" name. "SAMSUNG" is not an abbreviation but a regular trademarked name. Therefore it should be written with lowercase letters starting with capital letter. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: wan: sdla: Fix cast from pointer to integer of different sizeKrzysztof Kozlowski1-1/+1
Since net_device.mem_start is unsigned long, it should not be cast to int right before casting to pointer. This fixes warning (compile testing on alpha architecture): drivers/net/wan/sdla.c: In function ‘sdla_transmit’: drivers/net/wan/sdla.c:711:13: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.