aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro/stmmac (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-11-17net: stmmac: replace if (netif_msg_type) by their netif_xxx counterpartLABBE Corentin1-28/+21
As sugested by Joe Perches, we could replace all if (netif_msg_type(priv)) dev_xxx(priv->devices, ...) by the simpler macro netif_xxx(priv, hw, priv->dev, ...) Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: stmmac: replace hardcoded function name by __func__LABBE Corentin1-4/+3
Some printing have the function name hardcoded. It is better to use __func__ instead. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-17net: stmmac: replace all pr_xxx by their netdev_xxx counterpartLABBE Corentin2-95/+123
The stmmac driver use lots of pr_xxx functions to print information. This is bad since we cannot know which device logs the information. (moreover if two stmmac device are present) Furthermore, it seems that it assumes wrongly that all logs will always be subsequent by using a dev_xxx then some indented pr_xxx like this: kernel: sun7i-dwmac 1c50000.ethernet: no reset control found kernel: Ring mode enabled kernel: No HW DMA feature register supported kernel: Normal descriptors kernel: TX Checksum insertion supported So this patch replace all pr_xxx by their netdev_xxx counterpart. Excepts for some printing where netdev "cause" unpretty output like: sun7i-dwmac 1c50000.ethernet (unnamed net_device) (uninitialized): no reset control found In those case, I keep dev_xxx. In the same time I remove some "stmmac:" print since this will be a duplicate with that dev_xxx displays. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-16net: stmmac: Implement ethtool::nway_resetFlorian Fainelli1-0/+1
Utilize the generic phy_ethtool_nway_reset() helper function to implement an autonegotiation restart. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: stmmac: change dma descriptors to __le32Michael Weiser8-181/+195
The stmmac driver does not take into account the processor may be big endian when writing the DMA descriptors. This causes the ethernet interface not to be initialised correctly when running a big-endian kernel. Change the descriptors for DMA to use __le32 and ensure they are suitably swapped before writing. Tested successfully on the Cubieboard2. Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+7
Several cases of bug fixes in 'net' overlapping other changes in 'net-next-. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-14net: stmmac: Fix lack of link transition for fixed PHYsFlorian Fainelli1-0/+7
Commit 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") added some logic to avoid polling the fixed PHY and therefore invoking the adjust_link callback more than once, since this is a fixed PHY and link events won't be generated. This works fine the first time, because we start with phydev->irq = PHY_POLL, so we call adjust_link, then we set phydev->irq = PHY_IGNORE_INTERRUPT and we stop polling the PHY. Now, if we called ndo_close(), which calls both phy_stop() and does an explicit netif_carrier_off(), we end up with a link down. Upon calling ndo_open() again, despite starting the PHY state machine, we have PHY_IGNORE_INTERRUPT set, and we generate no link event at all, so the link is permanently down. Fixes: 52f95bbfcf72 ("stmmac: fix adjust link call in case of a switch is attached") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09Revert "net: stmmac: allow to split suspend/resume from init/exit callbacks"Joachim Eastwood1-6/+2
Instead of adding hooks inside stmmac_platform it is better to just use the standard PM callbacks within the specific dwmac-driver. This only used by the dwmac-rk driver. This reverts commit cecbc5563a02 ("stmmac: allow to split suspend/resume from init/exit callbacks"). Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09stmmac: dwmac-rk: absorb rk_gmac_init into probeJoachim Eastwood1-9/+1
Since the rk_gmac_init() only calls another function move this function call into probe so rk_gmac_init() can be removed. Since commit cecbc5563a02 ("stmmac: allow to split suspend/resume from init/exit callbacks") the init hook is no longer used in dwmac-rk so this can be removed. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09stmmac: dwmac-rk: turn exit into standard driver remove callbackJoachim Eastwood1-9/+11
Convert the exit hook into a standard driver remove function as the hook doesn't really buy us anything extra. Eventually the exit hook will be deprecated in favor of the driver remove function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-09stmmac: dwmac-rk: turn resume/suspend into standard PM callbacksJoachim Eastwood1-27/+32
Use standard PM resume/suspend callbacks instead of the hooks in stmmac_platform. This gives the driver more control and flexibility when implementing PM functionality. The hooks in stmmac_platform also doesn't buy us anything extra. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: remove unused priv dev memberJoachim Eastwood1-2/+0
The dev member of struct sti_dwmac is not used anywhere in the driver so lets just remove it. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: clean up and rename sti_dwmac_initJoachim Eastwood1-6/+4
Rename sti_dwmac_init to sti_dwmac_set_mode which is a better description for what it really does. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: move clk_prepare_enable out of init and add error handlingJoachim Eastwood1-4/+15
Add clock error handling to probe and in the process move clock enabling out of sti_dwmac_init() to make this easier. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: move st, gmac_en parsing to sti_dwmac_parse_dataJoachim Eastwood1-3/+3
The sti_dwmac_init() function is called both from probe and resume. Since DT properties doesn't change between suspend/resume cycles move parsing of this parameter into sti_dwmac_parse_data() where it belongs. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: add PM ops and resume functionJoachim Eastwood1-10/+37
Implement PM callbacks and driver remove in the driver instead of relying on the init/exit hooks in stmmac_platform. This gives the driver more flexibility in how the code is organized. Eventually the init/exit callbacks will be deprecated in favor of the standard PM callbacks and driver remove function. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: remove clk NULL checksJoachim Eastwood1-6/+4
Since sti_dwmac_parse_data() sets dwmac->clk to NULL if not clock was provided in DT and NULL is a valid clock there is no need to check for NULL before using this clock. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-06stmmac: dwmac-sti: remove useless of_node checkJoachim Eastwood1-3/+0
Since dwmac-sti is a DT only driver checking for OF node is not necessary. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-03net: stmmac: Add OXNAS Glue DriverNeil Armstrong3-0/+229
Add Synopsys Designware MAC Glue layer for the Oxford Semiconductor OX820. Acked-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-16/+12
Mostly simple overlapping changes. For example, David Ahern's adjacency list revamp in 'net-next' conflicted with an adjacency list traversal bug fix in 'net'. Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-20stmmac: display the descriptors if DES0 = 0Giuseppe CAVALLARO1-4/+3
It makes sense to display the descriptors even if DES0 is zero. This helps for example in case of it is needed to dump rx write-back descriptors to get timestamp status. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-19stmmac: fix and review the ptp registration.Giuseppe CAVALLARO3-14/+9
The commit commit 7086605a6ab5 ("stmmac: fix error check when init ptp") breaks the procedure added by the commit efee95f42b5d ("ptp_clock: future-proofing drivers against PTP subsystem becoming optional") So this patch tries to re-import the logic added by the latest commit above: it makes sense to have the stmmac_ptp_register as void function and, inside the main, the stmmac_init_ptp can fails in case of the capability cannot be supported by the HW. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Cc: Nicolas Pitre <nico@linaro.org> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-18ethernet: use core min/max MTU checkingJarod Wilson1-16/+9
et131x: min_mtu 64, max_mtu 9216 altera_tse: min_mtu 64, max_mtu 1500 amd8111e: min_mtu 60, max_mtu 9000 bnad: min_mtu 46, max_mtu 9000 macb: min_mtu 68, max_mtu 1500 or 10240 depending on hardware capability xgmac: min_mtu 46, max_mtu 9000 cxgb2: min_mtu 68, max_mtu 9582 (pm3393) or 9600 (vsc7326) enic: min_mtu 68, max_mtu 9000 gianfar: min_mtu 50, max_mu 9586 hns_enet: min_mtu 68, max_mtu 9578 (v1) or 9706 (v2) ksz884x: min_mtu 60, max_mtu 1894 myri10ge: min_mtu 68, max_mtu 9000 natsemi: min_mtu 64, max_mtu 2024 nfp: min_mtu 68, max_mtu hardware-specific forcedeth: min_mtu 64, max_mtu 1500 or 9100, depending on hardware pch_gbe: min_mtu 46, max_mtu 10300 pasemi_mac: min_mtu 64, max_mtu 9000 qcaspi: min_mtu 46, max_mtu 1500 - remove qcaspi_netdev_change_mtu as it is now redundant rocker: min_mtu 68, max_mtu 9000 sxgbe: min_mtu 68, max_mtu 9000 stmmac: min_mtu 46, max_mtu depends on hardware tehuti: min_mtu 60, max_mtu 16384 - driver had no max mtu checking, but product docs say 16k jumbo packets are supported by the hardware netcp: min_mtu 68, max_mtu 9486 - remove netcp_ndo_change_mtu as it is now redundant via-velocity: min_mtu 64, max_mtu 9000 octeon: min_mtu 46, max_mtu 65370 CC: netdev@vger.kernel.org CC: Mark Einon <mark.einon@gmail.com> CC: Vince Bridgers <vbridger@opensource.altera.com> CC: Rasesh Mody <rasesh.mody@qlogic.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Santosh Raspatur <santosh@chelsio.com> CC: Hariprasad S <hariprasad@chelsio.com> CC: Christian Benvenuti <benve@cisco.com> CC: Sujith Sankar <ssujith@cisco.com> CC: Govindarajulu Varadarajan <_govind@gmx.com> CC: Neel Patel <neepatel@cisco.com> CC: Claudiu Manoil <claudiu.manoil@freescale.com> CC: Yisen Zhuang <yisen.zhuang@huawei.com> CC: Salil Mehta <salil.mehta@huawei.com> CC: Hyong-Youb Kim <hykim@myri.com> CC: Jakub Kicinski <jakub.kicinski@netronome.com> CC: Olof Johansson <olof@lixom.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Byungho An <bh74.an@samsung.com> CC: Girish K S <ks.giri@samsung.com> CC: Vipul Pandya <vipul.pandya@samsung.com> CC: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: Alexandre Torgue <alexandre.torgue@st.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: Wingman Kwok <w-kwok2@ti.com> CC: Murali Karicheri <m-karicheri2@ti.com> CC: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-15stmmac: fix an error code in stmmac_ptp_register()Dan Carpenter1-1/+3
PTR_ERR(NULL) is success. We have to preserve the error code earlier. Fixes: 7086605a6ab5 ("stmmac: fix error check when init ptp") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-11/+20
2016-10-13stmmac: fix error check when init ptpGiuseppe CAVALLARO2-6/+8
This patch fixes a problem when propagated the failure of ptp_clock_register to open function. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-13stmmac: fix ptp init for gmac4Giuseppe CAVALLARO1-5/+12
The gmac 4.x version has not extended descriptors (that are available on 3.x instead of). While initializing the PTP module, the advanced PTP was enabled in case of extended descriptors. This cannot be applied for 4.x version where only the hardware capability register has to show if the feature is present. Patch also adds some extra netdev_(debug/inof) to better dump the configuration. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Cc: Rayagond Kokatanur <rayagond@vayavyalabs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12net: stmmac: use new api ethtool_{get|set}_link_ksettingsPhilippe Reynes1-41/+56
The ethtool api {get|set}_settings is deprecated. We move this driver to new api {get|set}_link_ksettings. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-12net: stmmac: use phydev from struct net_devicePhilippe Reynes4-33/+30
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-10-07Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds5-6/+338
Pull ARM SoC late DT updates from Arnd Bergmann: "These updates have been kept in a separate branch mostly because they rely on updates to the respective clk drivers to keep the shared header files in sync. - The Renesas r8a7796 (R-Car M3-W) platform gets added, this is an automotive SoC similar to the ⅹ8a7795 chip we already support, but the dts changes rely on a clock driver change that has been merged for v4.9 through the clk tree. - The Amlogic meson-gxbb (S905) platform gains support for a few drivers merged through our tree, in particular the network and usb driver changes are required and included here, and also the clk tree changes. - The Allwinner platforms have seen a large-scale change to their clk drivers and the dts file updates must come after that. This includes the newly added Nextthing GR8 platform, which is derived from sun5i/A13. - Some integrator (arm32) changes rely on clk driver changes. - A single patch for lpc32xx has no such dependency but wasn't added until just before the merge window" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (99 commits) ARM: dts: lpc32xx: add device node for IRAM on-chip memory ARM: dts: sun8i: Add accelerometer to polaroid-mid2407pxe03 ARM: dts: sun8i: enable UART1 for iNet D978 Rev2 board ARM: dts: sun8i: add pinmux for UART1 at PG dts: sun8i-h3: add I2C0-2 peripherals to H3 SOC dts: sun8i-h3: add pinmux definitions for I2C0-2 dts: sun8i-h3: associate exposed UARTs on Orange Pi Boards dts: sun8i-h3: split off RTS/CTS for UART1 in seperate pinmux dts: sun8i-h3: add pinmux definitions for UART2-3 ARM: dts: sun9i: a80-optimus: Disable EHCI1 ARM: dts: sun9i: cubieboard4: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: a80-optimus: Add AXP806 PMIC device node and regulators ARM: dts: sun9i: cubieboard4: Declare AXP809 SW regulator as unused ARM: dts: sun9i: a80-optimus: Declare AXP809 SW regulator as unused ARM: dts: sun8i: Add touchscreen node for sun8i-a33-ga10h ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2809pxe04 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-polaroid-mid2407pxe03 ARM: dts: sun8i: Add touchscreen node for sun8i-a23-inet86dz ARM: dts: sun8i: Add touchscreen node for sun8i-a23-gt90h ARM64: dts: meson-gxbb-vega-s95: Enable USB Nodes ...
2016-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-2/+2
2016-09-22ptp_clock: future-proofing drivers against PTP subsystem becoming optionalNicolas Pitre1-1/+1
Drivers must be ready to accept NULL from ptp_clock_register() if the PTP clock subsystem is configured out. This patch documents that and ensures that all drivers cope well with a NULL return. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Eugenia Emantayev <eugenia@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-18stmmac: fix PWRDWN into the PMT register for global unicast.Giuseppe CAVALLARO2-2/+2
MAC devices use the RWKPKTEN and MGKPKTEN bits of the PMT Control/Status register to generate power management events. So this patch is to properly set the RWKPKTEN [BIT(2)] inside the PMT register (needed in case of global unicast). Reported-by: Aditi SHARMA <aditi-hed.sharma@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-13net: ethernet: dwmac: fix non static symbol warningWei Yongjun1-1/+2
Fixes the following sparse warning: drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c:172:1: warning: symbol 'stm32_dwmac_pm_ops' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-12stmmac: use IS_ENABLED() instead of checking for built-in or moduleJavier Martinez Canillas1-1/+1
The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-07net: stmmac: update the module description of the dwmac-meson driverMartin Blumenstingl1-2/+2
The dwmac-meson glue driver supports Meson6 and Meson8 SoCs. Newer SoCs are supported by the dwmac-meson8b driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-07net: stmmac: add a glue driver for the Amlogic Meson 8b / GXBB DWMACMartin Blumenstingl3-4/+328
The Ethernet controller available in Meson8b and GXBB SoCs is a Synopsys DesignWare MAC IP core which is already supported by the stmmac driver. In addition to the standard stmmac driver some Meson8b / GXBB specific registers have to be configured for the PHY clocks. These SoC specific registers are called PRG_ETHERNET_ADDR0 and PRG_ETHERNET_ADDR1 in the datasheet. These registers are not backwards compatible with those on Meson 6b, which is why a new glue driver is introduced. This worked for many boards because the bootloader programs the PRG_ETHERNET registers correctly. Additionally the meson6-dwmac driver only sets bit 1 of PRG_ETHERNET_ADDR0 which (according to the datasheet) is only used during reset. Currently all configuration values can be determined automatically, based on the configured phy-mode (which is mandatory for the stmmac driver). If required the tx-delay and the mux clock (so it supports the MPLL2 clock as well) can be made configurable in the future. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Kevin Hilman <khilman@baylibre.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-07stmmac: introduce get_stmmac_bsp_priv() helperJoachim Eastwood1-0/+8
Create a helper to retrieve dwmac private data from a dev pointer. This is useful in PM callbacks and driver remove. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
2016-09-02net: stmmac: dwmac-rk: add pd_gmac support for rk3399David Wu1-0/+9
Add the gmac power domain support for rk3399, in order to save more power consumption. Signed-off-by: David Wu <david.wu@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: stmmac: dwmac-rk: fixes the gmac resume after PD on/offRoger Chen1-9/+10
GMAC Power Domain(PD) will be disabled during suspend. That will causes GRF registers reset. So corresponding GRF registers for GMAC must be setup again. Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-02net: stmmac: dwmac-rk: add rk3366 & rk3399 specific dataRoger Chen1-0/+226
Add constants and callback functions for the dwmac on rk3228/rk3229 socs. As can be seen, the base structure is the same, only registers and the bits in them moved slightly. Signed-off-by: Roger Chen <roger.chen@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: ethernet: stmmac: add support of Synopsys 3.50a MAC IPAlexandre TORGUE1-0/+1
Adds support of Synopsys 3.50a MAC IP in stmmac driver. Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-01net: ethernet: dwmac: add Ethernet glue logic for stm32 chipAlexandre TORGUE3-0/+206
stm324xx family chips support Synopsys MAC 3.510 IP. This patch adds settings for logical glue logic: -clocks -mode selection MII or RMII. Reviewed-by: Joachim Eastwood <manabian@gmail.com> Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Tested-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Alexandre TORGUE <alexandre.torgue@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-30drivers: net: stmmac: fix spelling mistake "mulitcast" -> "multicast"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_warn message. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01ethernet: stmicro: stmmac: add missing of_node_put after calling of_parse_phandlePeter Chen2-2/+6
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. This commit fixes both local (in stmmac_axi_setup) and global (plat->phy_node) device_node for this issue, and using the correct device node when tries to put node at stmmac_probe_config_dt for error path. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-08-01ethernet: stmicro: stmmac: dwmac-socfpga: add missing of_node_put after calling of_parse_phandlePeter Chen1-10/+26
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Signed-off-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-13stmmac: dwmac-socfpga: remove redundant dev_err call in socfpga_dwmac_parse_data()Wei Yongjun1-14/+3
There is a error message within devm_ioremap_resource already, so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-12stmmac: dwmac-socfpga: fix wrong pointer passed to PTR_ERR()Wei Yongjun1-1/+1
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-10net: ethernet: Add TSE PCS support to dwmac-socfpgaTien Hock Loh4-22/+431
This adds support for TSE PCS that uses SGMII adapter when the phy-mode of the dwmac is set to sgmii. Signed-off-by: Tien Hock Loh <thloh@altera.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: drivers/net/ethernet/mellanox/mlx5/core/en.h drivers/net/ethernet/mellanox/mlx5/core/en_main.c drivers/net/usb/r8152.c All three conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.