aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/stmicro (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-8/+23
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-06net: stmmac: fix ptp timestamping on Rx on gmac4Ilias Apalodimas2-18/+16
The current driver only enables Pdelay_Req and Pdelay_Resp when HWTSTAMP_FILTER_PTP_V2_EVENT, HWTSTAMP_FILTER_PTP_V1_L4_EVENT or HWTSTAMP_FILTER_PTP_V2_L4_EVENT is requested. This results in ptp sync on slave mode to report 'received SYNC without timestamp' when using ptp4l. Although the hardware can support Sync, Pdelay_Req and Pdelay_resp by setting bit14 annd bits 17/16 to 01 this leaves Delay_Req timestamps out. Fix this by enabling all event and general messages timestamps. This includes SYNC, Follow_Up, Delay_Req, Delay_Resp, Pdelay_Req, Pdelay_Resp and Pdelay_Resp_Follow_Up messages. Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Jose Abreu <joabreu@synopsys.com> Tested-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: stmmac: Disable EEE mode earlier in XMIT callbackJose Abreu1-3/+3
In stmmac xmit callback we use a different flow for TSO packets but TSO xmit callback is not disabling the EEE mode. Fix this by disabling earlier the EEE mode, i.e. before calling the TSO xmit callback. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: stmmac: Send TSO packets always from Queue 0Jose Abreu1-1/+10
The number of TSO enabled channels in HW can be different than the number of total channels. There is no way to determined, at runtime, the number of TSO capable channels and its safe to assume that if TSO is enabled then at least channel 0 will be TSO capable. Lets always send TSO packets from Queue 0. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-30net: stmmac: Fallback to Platform Data clock in Watchdog conversionJose Abreu1-4/+10
If we don't have DT then stmmac_clk will not be available. Let's add a new Platform Data field so that we can specify the refclk by this mean. This way we can still use the coalesce command in PCI based setups. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+3
2019-01-27net: stmmac: dwmac-rk: fix error handling in rk_gmac_powerup()Alexey Khoroshilov1-1/+3
If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-24net: stmmac: Fix return value check in qcom_ethqos_probe()Wei Yongjun1-2/+2
In case of error, the function devm_clk_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Vinod Koul <vkoul@kernel.org> Acked-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: stmmac: Add driver for Qualcomm ethqosVinod Koul3-0/+556
Add glue driver to support Qualcomm ETHQOS using stmmac driver. This is based on downstream driver written by Siddarth Gupta, Sunil Kumar Paidimarri, Rahul Ankushrao Kawadgave, Nisha Menon, Jagadeesh Babu Challagundla, Chaitanya Pratapa, Lakshit Tyagi, Suraj Jaiswal, Sneh Shah and Ventrapragada Ravi Kanth Co-developed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-22net: stmmac: implement the SIOCGHWTSTAMP ioctlArtem Panfilov2-5/+33
This patch adds support for the SIOCGHWTSTAMP ioctl which enables user processes to read the current hwtstamp_config settings non-destructively. Signed-off-by: Artem Panfilov <panfilov.artyom@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds4-28/+41
Pull networking fixes from David Miller: 1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur Gautier. 2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei. 3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano Brivio. 4) Use after free in hns driver, from Yonglong Liu. 5) icmp6_send() needs to handle the case of NULL skb, from Eric Dumazet. 6) Missing rcu read lock in __inet6_bind() when operating on mapped addresses, from David Ahern. 7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva. 8) Fix PHY vs r8169 module loading ordering issues, from Heiner Kallweit. 9) Fix bridge vlan memory leak, from Ido Schimmel. 10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe. 11) Infoleak in ipv6_local_error(), flow label isn't completely initialized. From Eric Dumazet. 12) Handle mv88e6390 errata, from Andrew Lunn. 13) Making vhost/vsock CID hashing consistent, from Zha Bin. 14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo. 15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits) bnxt_en: Fix context memory allocation. bnxt_en: Fix ring checking logic on 57500 chips. mISDN: hfcsusb: Use struct_size() in kzalloc() net: clear skb->tstamp in bridge forwarding path net: bpfilter: disallow to remove bpfilter module while being used net: bpfilter: restart bpfilter_umh when error occurred net: bpfilter: use cleanup callback to release umh_info umh: add exit routine for UMH process isdn: i4l: isdn_tty: Fix some concurrency double-free bugs vhost/vsock: fix vhost vsock cid hashing inconsistent net: stmmac: Prevent RX starvation in stmmac_napi_poll() net: stmmac: Fix the logic of checking if RX Watchdog must be enabled net: stmmac: Check if CBS is supported before configuring net: stmmac: dwxgmac2: Only clear interrupts that are active net: stmmac: Fix PCI module removal leak tools/bpf: fix bpftool map dump with bitfields tools/bpf: test btf bitfield with >=256 struct member offset bpf: fix bpffs bitfield pretty print net: ethernet: mediatek: fix warning in phy_start_aneg tcp: change txhash on SYN-data timeout ...
2019-01-11net: stmmac: Prevent RX starvation in stmmac_napi_poll()Jose Abreu1-13/+14
Currently, TX is given a budget which is consumed by stmmac_tx_clean() and stmmac_rx() is given the remaining non-consumed budget. This is wrong and in case we are sending a large number of packets this can starve RX because remaining budget will be low. Let's give always the same budget for RX and TX clean. While at it, check if we missed any interrupts while we were in NAPI callback by looking at DMA interrupt status. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix the logic of checking if RX Watchdog must be enabledJose Abreu1-12/+12
RX Watchdog can be disabled by platform definitions but currently we are initializing the descriptors before checking if Watchdog must be disabled or not. Fix this by checking earlier if user wants Watchdog disabled or not. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Check if CBS is supported before configuringJose Abreu1-0/+2
Check if CBS is currently supported before trying to configure it in HW. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: dwxgmac2: Only clear interrupts that are activeJose Abreu1-3/+3
In DMA interrupt handler we were clearing all interrupts status, even the ones that were not active. Fix this and only clear the active interrupts. Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-11net: stmmac: Fix PCI module removal leakJose Abreu1-0/+10
Since commit b7d0f08e9129, the enable / disable of PCI device is not managed which will result in IO regions not being automatically unmapped. As regions continue mapped it is currently not possible to remove and then probe again the PCI module of stmmac. Fix this by manually unmapping regions on remove callback. Changes from v1: - Fix build error Cc: Joao Pinto <jpinto@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-24/+16
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-12-27net: stmicro: fix a missing check of clk_prepareKangjie Lu1-1/+3
clk_prepare() could fail, so let's check its status, and if it fails, return its error code upstream. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+1
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19net-next: stmmac: dwmac-mediatek: remove fine-tune propertyBiao Huang1-47/+24
1. remove fine-tune property and related setting to simplify the timing adjustment flow. 2. set timing value according to the value from device tree, and will not care whether PHY insert internal delay. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-18net: stmmac: Fix an error code in probe()Dan Carpenter1-0/+1
The function should return an error if create_singlethread_workqueue() fails. Fixes: 34877a15f787 ("net: stmmac: Rework and fix TX Timeout code") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12net-next: stmmac: dwmac-mediatek: add module license infoBiao Huang1-0/+5
Add MODULE_LICENSE info to fix this: WARNING: modpost: missing MODULE_LICENSE() in drivers/net/ethernet/stmicro/stmmac/dwmac-mediatek.o Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-12stmmac: dwmac-mediatek: add support for mt2712Biao Huang3-0/+417
Add Ethernet support for MediaTek SoCs from the mt2712 family Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-10/+13
Several conflicts, seemingly all over the place. I used Stephen Rothwell's sample resolutions for many of these, if not just to double check my own work, so definitely the credit largely goes to him. The NFP conflict consisted of a bug fix (moving operations past the rhashtable operation) while chaning the initial argument in the function call in the moved code. The net/dsa/master.c conflict had to do with a bug fix intermixing of making dsa_master_set_mtu() static with the fixing of the tagging attribute location. cls_flower had a conflict because the dup reject fix from Or overlapped with the addition of port range classifiction. __set_phy_supported()'s conflict was relatively easy to resolve because Andrew fixed it in both trees, so it was just a matter of taking the net-next copy. Or at least I think it was :-) Joe Stringer's fix to the handling of netns id 0 in bpf_sk_lookup() intermixed with changes on how the sdif and caller_net are calculated in these code paths in net-next. The remaining BPF conflicts were largely about the addition of the __bpf_md_ptr stuff in 'net' overlapping with adjustments and additions to the relevant data structure where the MD pointer macros are used. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-06net: core: dev: Add extack argument to dev_open()Petr Machata1-1/+1
In order to pass extack together with NETDEV_PRE_UP notifications, it's necessary to route the extack to __dev_open() from diverse (possibly indirect) callers. One prominent API through which the notification is invoked is dev_open(). Therefore extend dev_open() with and extra extack argument and update all users. Most of the calls end up just encoding NULL, but bond and team drivers have the extack readily available. Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03net: stmmac: convert to DEFINE_SHOW_ATTRIBUTEYangtao Li1-30/+4
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code. Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-30net: stmmac: Move debugfs init/exit to ->probe()/->remove()Thierry Reding1-10/+13
Setting up and tearing down debugfs is current unbalanced, as seen by this error during resume from suspend: [ 752.134067] dwc-eth-dwmac 2490000.ethernet eth0: ERROR failed to create debugfs directory [ 752.134347] dwc-eth-dwmac 2490000.ethernet eth0: stmmac_hw_setup: failed debugFS registration The imbalance happens because the driver creates the debugfs hierarchy when the device is opened and tears it down when the device is closed. There's little gain in that, and it could be argued that it is even surprising because it's not usually done for other devices. Fix the imbalance by moving the debugfs creation and teardown to the driver's ->probe() and ->remove() implementations instead. Note that the ring descriptors cannot be read while the interface is down, so make sure to return an empty file when the descriptors_status debugfs file is read. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-4/+5
2018-11-11net: ethernet: Convert phydev advertize and supported from u32 to link modeAndrew Lunn1-4/+8
There are a few MAC/PHYs combinations which now support > 1Gbps. These may need to make use of link modes with bits > 31. Thus their supported PHY features or advertised features cannot be implemented using the current bitmap in a u32. Convert to using a linkmode bitmap, which can support all the currently devices link modes, and is future proof as more modes are added. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08net: stmmac: Fix RX packet size > 8191Thor Thayer4-4/+5
Ping problems with packets > 8191 as shown: PING 192.168.1.99 (192.168.1.99) 8150(8178) bytes of data. 8158 bytes from 192.168.1.99: icmp_seq=1 ttl=64 time=0.669 ms wrong data byte 8144 should be 0xd0 but was 0x0 16 10 11 12 13 14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28 29 2a 2b 2c 2d 2e 2f %< ---------------snip-------------------------------------- 8112 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 ba bb bc bd be bf c0 c1 c2 c3 c4 c5 c6 c7 c8 c9 ca cb cc cd ce cf 8144 0 0 0 0 d0 d1 ^^^^^^^ Notice the 4 bytes of 0 before the expected byte of d0. Databook notes that the RX buffer must be a multiple of 4/8/16 bytes [1]. Update the DMA Buffer size define to 8188 instead of 8192. Remove the -1 from the RX buffer size allocations and use the new DMA Buffer size directly. [1] Synopsys DesignWare Cores Ethernet MAC Universal v3.70a [section 8.4.2 - Table 8-24] Tested on SoCFPGA Stratix10 with ping sweep from 100 to 8300 byte packets. Fixes: 286a83721720 ("stmmac: add CHAINED descriptor mode support (V4)") Suggested-by: Jose Abreu <jose.abreu@synopsys.com> Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-31net: stmmac: Fix stmmac_mdio_reset() when building stmmac as modulesNiklas Cassel1-1/+1
When building stmmac, it is only possible to select CONFIG_DWMAC_GENERIC, or any of the glue drivers, when CONFIG_STMMAC_PLATFORM is set. The only exception is CONFIG_STMMAC_PCI. When calling of_mdiobus_register(), it will call our ->reset() callback, which is set to stmmac_mdio_reset(). Most of the code in stmmac_mdio_reset() is protected by a "#if defined(CONFIG_STMMAC_PLATFORM)", which will evaluate to false when CONFIG_STMMAC_PLATFORM=m. Because of this, the phy reset gpio will only be pulled when stmmac is built as built-in, but not when built as modules. Fix this by using "#if IS_ENABLED()" instead of "#if defined()". Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-26Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linuxLinus Torvalds1-2/+10
Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...
2018-10-23net: stmmac: dwmac-sun8i: fix OF child-node lookupJohan Hovold1-2/+10
Use the new of_get_compatible_child() helper to lookup the mdio-internal child node instead of using of_find_compatible_node(), which searches the entire tree from a given start node and thus can return an unrelated (i.e. non-child) node. This also addresses a potential use-after-free (e.g. after probe deferral) as the tree-wide helper drops a reference to its first argument (i.e. the mdio-mux node). Fortunately, this was inadvertently balanced by a failure to drop the mdio-mux reference after lookup. While at it, also fix the related mdio-internal- and phy-node reference leaks. Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs") Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org>
2018-10-22net: stmmac: Set OWN bit for jumbo framesThor Thayer1-2/+2
Ping with Jumbo packet does not reply and get a watchdog timeout [ 46.059616] ------------[ cut here ]------------ [ 46.064268] NETDEV WATCHDOG: eth0 (socfpga-dwmac): transmit queue 0 timed out [ 46.071471] WARNING: CPU: 1 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x2cc/0x2d8 [ 46.079708] Modules linked in: [ 46.082761] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.18.0-00115-gc262be665854-dirty #264 [ 46.091082] Hardware name: SoCFPGA Stratix 10 SoCDK (DT) [ 46.096377] pstate: 20000005 (nzCv daif -PAN -UAO) [ 46.101152] pc : dev_watchdog+0x2cc/0x2d8 [ 46.105149] lr : dev_watchdog+0x2cc/0x2d8 [ 46.109144] sp : ffff00000800bd80 [ 46.112447] x29: ffff00000800bd80 x28: ffff80007a9b4940 [ 46.117744] x27: 00000000ffffffff x26: ffff80007aa183b0 [ 46.123040] x25: 0000000000000001 x24: 0000000000000140 [ 46.128336] x23: ffff80007aa1839c x22: ffff80007aa17fb0 [ 46.133632] x21: ffff80007aa18000 x20: ffff0000091a7000 [ 46.138927] x19: 0000000000000000 x18: ffffffffffffffff [ 46.144223] x17: 0000000000000000 x16: 0000000000000000 [ 46.149519] x15: ffff0000091a96c8 x14: 07740775076f0720 [ 46.154814] x13: 07640765076d0769 x12: 0774072007300720 [ 46.160110] x11: 0765077507650775 x10: 0771072007740769 [ 46.165406] x9 : 076d0773076e0761 x8 : 077207740720073a [ 46.170702] x7 : 072907630761076d x6 : ffff80007ff9a0c0 [ 46.175997] x5 : ffff80007ff9a0c0 x4 : 0000000000000002 [ 46.181293] x3 : 0000000000000000 x2 : ffff0000091ac180 [ 46.186589] x1 : e6a742ebe628e800 x0 : 0000000000000000 [ 46.191885] Call trace: [ 46.194326] dev_watchdog+0x2cc/0x2d8 [ 46.197980] call_timer_fn+0x20/0x78 [ 46.201544] expire_timers+0xa4/0xb0 [ 46.205108] run_timer_softirq+0xe4/0x198 [ 46.209107] __do_softirq+0x114/0x210 [ 46.212760] irq_exit+0xd0/0xd8 [ 46.215895] __handle_domain_irq+0x60/0xb0 [ 46.219977] gic_handle_irq+0x58/0xa8 [ 46.223628] el1_irq+0xb0/0x128 [ 46.226761] arch_cpu_idle+0x10/0x18 [ 46.230326] do_idle+0x1d4/0x288 [ 46.233544] cpu_startup_entry+0x24/0x28 [ 46.237457] secondary_start_kernel+0x17c/0x1c0 [ 46.241971] ---[ end trace 57048cd1372cd828 ]--- Inspection of queue showed Jumbo packets were not sent out. The ring Jumbo packet function needs to set the OWN bit so the packet is sent. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-25Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-108/+148
Version bump conflict in batman-adv, take what's in net-next. iavf conflict, adjustment of netdev_ops in net-next conflicting with poll controller method removal in net. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Fixup the tail addr setting in xmit pathJose Abreu1-2/+3
Currently we are always setting the tail address of descriptor list to the end of the pre-allocated list. According to databook this is not correct. Tail address should point to the last available descriptor + 1, which means we have to update the tail address everytime we call the xmit function. This should make no impact in older versions of MAC but in newer versions there are some DMA features which allows the IP to fetch descriptors in advance and in a non sequential order so its critical that we set the tail address correctly. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: f748be531d70 ("stmmac: support new GMAC4") Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18net: stmmac: Rework coalesce timer and fix multi-queue racesJose Abreu3-106/+145
This follows David Miller advice and tries to fix coalesce timer in multi-queue scenarios. We are now using per-queue coalesce values and per-queue TX timer. Coalesce timer default values was changed to 1ms and the coalesce frames to 25. Tested in B2B setup between XGMAC2 and GMAC5. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Fixes: ce736788e8a ("net: stmmac: adding multiple buffers for TX") Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Jerome Brunet <jbrunet@baylibre.com> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-3/+2
Two new tls tests added in parallel in both net and net-next. Used Stephen Rothwell's linux-next resolution. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-16stmmac: fix valid numbers of unicast filter entriesJongsung Kim1-3/+2
Synopsys DWC Ethernet MAC can be configured to have 1..32, 64, or 128 unicast filter entries. (Table 7-8 MAC Address Registers from databook) Fix dwmac1000_validate_ucast_entries() to accept values between 1 and 32 in addition. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Add helper to remove a supported link modeAndrew Lunn1-4/+8
Some MAC hardware cannot support a subset of link modes. e.g. often 1Gbps Full duplex is supported, but Half duplex is not. Add a helper to remove such a link mode. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-12net: ethernet: Use phy_set_max_speed() to limit advertised speedAndrew Lunn1-2/+1
Many Ethernet MAC drivers want to limit the PHY to only advertise a maximum speed of 100Mbs or 1Gbps. Rather than using a mask, make use of the helper function phy_set_max_speed(). Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-08net: stmmac: Enable TC Ops for GMAC >= 4Jose Abreu1-3/+3
GMAC >= 4 also supports CBS. Lets enable the TC Ops for these versions. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-6/+2
2018-09-01net: stmmac: Add CBS support in XGMAC2Jose Abreu4-2/+50
XGMAC2 uses the same CBS mechanism as GMAC5, only registers offset changes. Lets use the same TC callbacks and implement the .config_cbs callback in XGMAC2 core. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29net: stmmac: build the dwmac-socfpga platform driver for Stratix10Dinh Nguyen1-1/+1
The Stratix10 SoC is an AARCH64 based platform that shares the same ethernet controller that is on other SoCFPGA platforms. Build the platform driver. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-29Revert "net: stmmac: Do not keep rearming the coalesce timer in stmmac_xmit"Jerome Brunet2-5/+1
This reverts commit 4ae0169fd1b3c792b66be58995b7e6b629919ecf. This change in the handling of the coalesce timer is causing regression on (at least) amlogic platforms. Network will break down very quickly (a few seconds) after starting a download. This can easily be reproduced using iperf3 for example. The problem has been reported on the S805, S905, S912 and A113 SoCs (Realtek and Micrel PHYs) and it is likely impacting all Amlogics platforms using Gbit ethernet No problem was seen with the platform using 10/100 only PHYs (GXL internal) Reverting change brings things back to normal and allows to use network again until we better understand the problem with the coalesce timer. Cc: Jose Abreu <joabreu@synopsys.com> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Vitor Soares <soares@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Corentin Labbe <clabbe@baylibre.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-25Revert "net: stmmac: fix build failure due to missing COMMON_CLK dependency"Geert Uytterhoeven1-5/+5
This reverts commit bde4975310eb1982bd0bbff673989052d92fd481. All legacy clock implementations now implement clk_set_rate() (Some implementations may be dummies, though). Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Arnd Bergmann <arnd@arnd.de> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-21net_sched: remove list_head from tc_actionCong Wang1-3/+2
After commit 90b73b77d08e, list_head is no longer needed. Now we just need to convert the list iteration to array iteration for drivers. Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions") Cc: Jiri Pirko <jiri@mellanox.com> Cc: Vlad Buslov <vladbu@mellanox.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-13net: stmmac: mark PM functions as __maybe_unusedArnd Bergmann1-2/+2
The newly added suspend/resume functions cause a build warning when CONFIG_PM is disabled: drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:324:12: error: 'stmmac_pci_resume' defined but not used [-Werror=unused-function] drivers/net/ethernet/stmicro/stmmac/stmmac_pci.c:306:12: error: 'stmmac_pci_suspend' defined but not used [-Werror=unused-function] Mark them as __maybe_unused so gcc can drop them silently. Fixes: b7d0f08e9129 ("net: stmmac: Fix WoL for PCI-based setups") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-09net: stmmac: Add the bindings parsing for XGMAC2Jose Abreu2-0/+8
Add the bindings parsing for XGMAC2 IP block. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.