aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/ti (follow)
AgeCommit message (Collapse)AuthorFilesLines
2015-08-13drivers: net: cpsw: add am335x errata workarround for interrutpsMugunthan V N1-6/+77
As per Am335x Errata [1] Advisory 1.0.9, The CPSW C0_TX_PEND and C0_RX_PEND interrupt outputs provide a single transmit interrupt that combines transmit channel interrupts TXPEND[7:0] and a single receive interrupt that combines receive channel interrupts RXPEND[7:0]. The TXPEND[0] and RXPEND[0] interrupt outputs are connected to the ARM Cortex-A8 interrupt controller (INTC) rather than the C0_TX_PEND and C0_RX_PEND interrupt outputs. So even though CPSW interrupt is cleared by writing appropriate values to EOI register the interrupt is not cleared in IRQ controller. So interrupt is still pending and CPU is struck in ISR, the workaround is to disable the interrupts in ARM irq controller. [1] http://www.ti.com/lit/er/sprz360f/sprz360f.pdf Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-23/+13
Conflicts: drivers/net/ethernet/cavium/Kconfig The cavium conflict was overlapping dependency changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07net: netcp: fix unused interface rx buffer size configurationWingMan Kwok2-23/+13
Prior to this patch, rx buffer size for each rx queue of an interface is configurable through dts bindings. But for an interface, the first rx queue's rx buffer size is always the usual MTU size (plus usual overhead) and page size for the remaining rx queues (if they are enabled by specifying a non-zero rx queue depth dts binding of the corresponding interface). This patch removes the rx buffer size configuration capability. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Acked-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06drivers: net: cpsw: add separate napi for txMugunthan V N1-13/+31
Instead of processing tx events in isr adding separate napi for tx which improves performance by ~180Mbps with omap2plus_defconfig on DRA74x platform. Also cleaning up rx napis by renaming to napi_rx for better understanding the code. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06drivers: net: cpsw: dual_emac: simplify napi usageMugunthan V N1-17/+9
Since interrupt is shared between the two ethernet interface and in isr only one napi is scheduled at an instance so having two napis doesn't make any difference. So making napi also as a common resource for the dual ethernet interfaces. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-06drivers: net: cpsw: remove disable_irq/enable_irq as irq can be masked from cpsw itselfMugunthan V N1-25/+2
CPSW interrupts can be disabled by masking CPSW interrupts and clearing interrupt by writing appropriate EOI. So removing all disable_irq/enable_irq as discussed in [1] [1] http://patchwork.ozlabs.org/patch/492741/ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller4-37/+77
Conflicts: arch/s390/net/bpf_jit_comp.c drivers/net/ethernet/ti/netcp_ethss.c net/bridge/br_multicast.c net/ipv4/ip_fragment.c All four conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: netcp: ethss: cleanup gbe_probe() and gbe_remove() functionsKaricheri, Muralidharan2-28/+17
This patch clean up error handle code to use goto label properly. In some cases, the code unnecessarily use goto instead of just returning the error code. Code also make explicit calls to devm_* APIs on error which is not necessary. In the gbe_remove() also it makes similar calls which is also unnecessary. Also fix few checkpatch warnings Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: netcp: ethss: fix up incorrect use of list apiKaricheri, Muralidharan1-3/+2
The code seems to assume a null is returned when the list is empty from first_sec_slave() to break the loop which is incorrect. Fix the code by using list_empty(). Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: netcp: fix cleanup interface list in netcp_remove()Karicheri, Muralidharan1-2/+11
Currently if user do rmmod keystone_netcp.ko following warning is seen :- [ 59.035891] ------------[ cut here ]------------ [ 59.040535] WARNING: CPU: 2 PID: 1619 at drivers/net/ethernet/ti/ netcp_core.c:2127 netcp_remove) This is because the interface list is not cleaned up in netcp_remove. This patch fixes this. Also fix some checkpatch related warnings. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29net: netcp: Fixes efuse mac addr swap on k2e and k2lWingMan Kwok1-2/+13
On some of the K2E and K2L platforms, the two DWORDs in efuse occupied by the pre-programmed mac address for slave port 1 are swapped. To workaround this issue, this patch adds a new define NETCP_EFUSE_ADDR_SWAP (2) which signifies the occurrence of such swapping so that the driver can take proper action. The flag can be enabled in the corresponding netcp interface dts binding as efuse-mac = <2> under the corresponding netcp interface node. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Fixes SGMII reset on network interface shutdownWingMan Kwok3-2/+47
This patch asserts SGMII RTRESET, i.e. resetting the SGMII Tx/Rx logic, during network interface shutdown to avoid having the hardware wedge when shutting down with high incoming traffic rates. This is cleared (brought out of RTRESET) when the interface is brought back up. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Adds missing statistics for K2L and K2EWingMan Kwok1-3/+174
This patch adds the missing statistics for the host and slave ports of the CPSW on K2L and K2E platforms. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Fixes to CPSW statistics collectionWingMan Kwok1-11/+75
In certain applications it's beneficial to allow the CPSW h/w stats counters to continue to increment even while the kernel polls them. This patch implements this behavior for both 1G and 10G ethernet subsystem modules. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Consolidates statistics collection codeWingMan Kwok1-45/+54
Different Keystone2 platforms have different number and layouts of hw statistics modules. This patch consolidates the statistics processing of different Keystone2 platforms for easy maintenance. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Fixes error in oversized memory allocation for statistics storageWingMan Kwok1-25/+21
The CPSW driver keeps internally some, but not all, of the statistics available in the hw statistics modules. Furthermore, some of the locations in the hw statistics modules are reserved and contain no useful information. Prior to this patch, the driver allocates memory of the size of the the whole hw statistics modules, instead of the size of statistics-entries-interested-in (i.e. et_stats), for internal storage. This patch fixes that. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Fixes hw statistics module base setting errorWingMan Kwok1-1/+5
This patch fixes error in the setting of the hw statistics module base for K2HK platform. In K2HK although there are 4 hw statistics modules, but only 2 are visible at a time. Thus when setting up the pointers to the base of the corresponding hw statistics modules, modules 0 and 2 should point to one base, while modules 1 and 3 should point to the other. Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-27net: netcp: Fixes the use of spin_lock_bh in timer functionWingMan Kwok1-2/+3
This patch fixes a bug in which the timer routine synchronized against the ethtool-triggered statistics updates with spin_lock_bh(). A timer function is itself a bottom-half, so this should be spin_lock(). Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2-7/+4
Conflicts: net/bridge/br_mdb.c br_mdb.c conflict was a function call being removed to fix a bug in 'net' but whose signature was changed in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-21drivers: net: cpsw: remove tx event processing in rx napi pollMugunthan V N1-6/+3
With commit c03abd84634d ("net: ethernet: cpsw: don't requests IRQs we don't use") common isr and napi are separated into separate tx isr and rx isr/napi, but still in rx napi tx events are handled. So removing the tx event handling in rx napi. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-20net: netcp: fix improper initialization in netcp_ndo_open()Karicheri, Muralidharan1-1/+1
The keystone qmss will raise interrupt when packet arrive at the receive queue. Only control available to avoid interrupt from happening is to keep the free descriptor queue (FDQ) empty in the receive side. So the filling of descriptors into the FDQ has to happen after request_irq() call is made as part of knav_queue_enable_notify(). So move the function netcp_rxpool_refill() after this call. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-18/+7
Conflicts: net/bridge/br_mdb.c Minor conflict in br_mdb.c, in 'net' we added a memset of the on-stack 'ip' variable whereas in 'net-next' we assign a new member 'vid'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-10net: Drop owner assignment from platform_driverKrzysztof Kozlowski1-1/+0
platform_driver does not need to set an owner because platform_driver_register() will set it. Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-09drivers: net: cpsw: fix disabling of tx interrupt in rx isrMugunthan V N1-16/+3
In commit 'c03abd84634d ("net: ethernet: cpsw: don't requests IRQs we don't use")', common isr is split into tx and rx, but in rx isr tx interrupt is also disabledi in cpsw_disable_irq(). So tx interrupts are not handled during rx interrupts and rx napi completion and results in poor tx performance by 40Mbps. Fixing by disabling only rx interrupt in rx isr. Cc: Felipe Balbi <balbi@ti.com> Cc: <stable@vger.kernel.org> # v4.0+ Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-08drivers: net: cpsw: fix crash while accessing second slave ethernet interfaceMugunthan V N1-2/+4
When cpsw's number of slave is set to 1 in device tree and while accessing second slave ndev and priv in cpsw_tx_interrupt(), there is a kernel crash. This is due to cpsw_get_slave_priv() not verifying number of slaves while retriving netdev priv and returns a invalid memory region. Fixing the issue by introducing number of slave check in cpsw_get_slave_priv() and cpsw_get_slave_ndev(). [ 15.879589] Unable to handle kernel paging request at virtual address 0f0e142c [ 15.888540] pgd = ed374000 [ 15.891359] [0f0e142c] *pgd=00000000 [ 15.895105] Internal error: Oops: 5 [#1] SMP ARM [ 15.899936] Modules linked in: [ 15.903139] CPU: 0 PID: 593 Comm: udhcpc Tainted: G W 4.1.0-12205-gfda8b18-dirty #10 [ 15.912386] Hardware name: Generic AM43 (Flattened Device Tree) [ 15.918557] task: ed2a2e00 ti: ed3fe000 task.ti: ed3fe000 [ 15.924187] PC is at cpsw_tx_interrupt+0x30/0x44 [ 15.929008] LR is at _raw_spin_unlock_irqrestore+0x40/0x44 [ 15.934726] pc : [<c048b9cc>] lr : [<c05ef4f4>] psr: 20000193 [ 15.934726] sp : ed3ffc08 ip : ed2a2e40 fp : 00000000 [ 15.946685] r10: c0969ce8 r9 : c0969cfc r8 : 00000000 [ 15.952129] r7 : 000000c6 r6 : ee54ab00 r5 : ee169c64 r4 : ee534e00 [ 15.958932] r3 : 0f0e0d0c r2 : 00000000 r1 : ed3ffbc0 r0 : 00000001 [ 15.965735] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 15.973261] Control: 10c5387d Table: ad374059 DAC: 00000015 [ 15.979246] Process udhcpc (pid: 593, stack limit = 0xed3fe218) [ 15.985414] Stack: (0xed3ffc08 to 0xed400000) [ 15.989954] fc00: ee54ab00 c009928c c0a9e648 60000193 000032e4 ee169c00 [ 15.998478] fc20: ee169c64 ee169c00 ee169c64 ee54ab00 00000001 00000001 ee67e268 ee008800 [ 16.006995] fc40: ee534800 c009946c ee169c00 ee169c64 c08bd660 c009c370 c009c2a4 000000c6 [ 16.015513] fc60: c08b75c4 c08b0854 00000000 c0098b3c 000000c6 c0098c50 ed3ffcb0 0000003a [ 16.024033] fc80: ed3ffcb0 fa24010c c08b7800 fa240100 ee7e9880 c00094c4 c05ef4e8 60000013 [ 16.032556] fca0: ffffffff ed3ffce4 ee7e9880 c05ef964 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.041080] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.049603] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff 00000001 00000001 [ 16.058121] fd00: ee536bf8 c0487a04 00000000 00000000 ee534800 00000000 00000156 c048c990 [ 16.066645] fd20: 00000000 00000000 c0969f40 00000000 00000000 c05000e8 00000001 00000000 [ 16.075167] fd40: 00000000 c051eefc 00000000 ee67e268 00000000 00000000 ee51b800 ed3ffd9c [ 16.083690] fd60: 00000000 ee67e200 ee51b800 ee7e9880 ee67e268 00000000 00000000 ee67e200 [ 16.092211] fd80: ee51b800 ee7e9880 ee67e268 ee534800 ee67e200 c051eedc ee67e268 00000010 [ 16.100727] fda0: 00000000 00000000 ee7e9880 ee534800 00000000 ee67e268 ee51b800 c05006fc [ 16.109247] fdc0: ee67e268 00000001 c0500488 00000156 ee7e9880 00000000 ed3fe000 fffffff4 [ 16.117771] fde0: ed3fff1c ee7e9880 ee534800 00000148 00000000 ed1f8340 00000000 00000000 [ 16.126289] fe00: 00000000 c05a9054 00000000 00000000 00000156 c0ab62a8 00000010 ed3e7000 [ 16.134812] fe20: 00000000 00000008 edcfb700 ed3fff1c c0fb5f94 ed2a2e00 c0fb5f64 000005d8 [ 16.143336] fe40: c0a9b3b8 00000000 ed3e7070 00000000 00000000 00000000 00009f40 00000000 [ 16.151858] fe60: 00000000 00020022 00110008 00000000 00000000 43004400 00000000 ffffffff [ 16.160374] fe80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 16.168898] fea0: edcfb700 bee5f380 00000014 00000000 ed3fe000 00000000 00004400 c04e2b64 [ 16.177415] fec0: 00000002 c04e3b00 ed3ffeec 00000001 0000011a 00000000 00000000 bee5f394 [ 16.185937] fee0: 00000148 ed3fff10 00000014 00000001 00000000 00000000 ed3ffee4 00000000 [ 16.194459] ff00: 00000000 00000000 00000000 c04e3664 00080011 00000002 06000000 ffffffff [ 16.202980] ff20: 0000ffff ffffffff 0000ffff c008dd54 ee5a6f08 ee636e80 c096972d c0089c14 [ 16.211499] ff40: 00000000 60000013 ee5a6f40 60000013 00000000 ee5a6f40 00000002 00000006 [ 16.220023] ff60: 00000000 edcfb700 00000001 ed2a2e00 c000f60c 00000001 0000011a c008ea34 [ 16.228540] ff80: 00000006 00000000 bee5f380 00000014 bee5f380 00000014 bee5f380 00000122 [ 16.237059] ffa0: c000f7c4 c000f5e0 bee5f380 00000014 00000006 bee5f394 00000148 00000000 [ 16.245581] ffc0: bee5f380 00000014 bee5f380 00000122 fffffd6e 00004300 00004800 00004400 [ 16.254104] ffe0: bee5f378 bee5f36c 000307ec b6f39044 40000010 00000006 ed36fa40 00000000 [ 16.262642] [<c048b9cc>] (cpsw_tx_interrupt) from [<c009928c>] (handle_irq_event_percpu+0x64/0x204) [ 16.272076] [<c009928c>] (handle_irq_event_percpu) from [<c009946c>] (handle_irq_event+0x40/0x64) [ 16.281330] [<c009946c>] (handle_irq_event) from [<c009c370>] (handle_fasteoi_irq+0xcc/0x1a8) [ 16.290220] [<c009c370>] (handle_fasteoi_irq) from [<c0098b3c>] (generic_handle_irq+0x20/0x30) [ 16.299197] [<c0098b3c>] (generic_handle_irq) from [<c0098c50>] (__handle_domain_irq+0x64/0xdc) [ 16.308273] [<c0098c50>] (__handle_domain_irq) from [<c00094c4>] (gic_handle_irq+0x20/0x60) [ 16.316987] [<c00094c4>] (gic_handle_irq) from [<c05ef964>] (__irq_svc+0x44/0x5c) [ 16.324779] Exception stack(0xed3ffcb0 to 0xed3ffcf8) [ 16.330044] fca0: 00000001 ed2a33d8 00000000 ed2a2e00 [ 16.338567] fcc0: 60000013 ee536bf8 60000013 ee51b800 ee7e9880 ee67e268 ee7e9880 ee534800 [ 16.347090] fce0: c0ad0768 ed3ffcf8 c008e910 c05ef4e8 60000013 ffffffff [ 16.353987] [<c05ef964>] (__irq_svc) from [<c05ef4e8>] (_raw_spin_unlock_irqrestore+0x34/0x44) [ 16.362973] [<c05ef4e8>] (_raw_spin_unlock_irqrestore) from [<c0487a04>] (cpdma_check_free_tx_desc+0x60/0x6c) [ 16.373311] [<c0487a04>] (cpdma_check_free_tx_desc) from [<c048c990>] (cpsw_ndo_start_xmit+0xb4/0x1ac) [ 16.383017] [<c048c990>] (cpsw_ndo_start_xmit) from [<c05000e8>] (dev_hard_start_xmit+0x2a4/0x4c0) [ 16.392364] [<c05000e8>] (dev_hard_start_xmit) from [<c051eedc>] (sch_direct_xmit+0xf4/0x210) [ 16.401246] [<c051eedc>] (sch_direct_xmit) from [<c05006fc>] (__dev_queue_xmit+0x2ac/0x7bc) [ 16.409960] [<c05006fc>] (__dev_queue_xmit) from [<c05a9054>] (packet_sendmsg+0xc68/0xeb4) [ 16.418585] [<c05a9054>] (packet_sendmsg) from [<c04e2b64>] (sock_sendmsg+0x14/0x24) [ 16.426663] [<c04e2b64>] (sock_sendmsg) from [<c04e3b00>] (SyS_sendto+0xb4/0xe0) [ 16.434377] [<c04e3b00>] (SyS_sendto) from [<c000f5e0>] (ret_fast_syscall+0x0/0x54) [ 16.442360] Code: e5943118 e593303c e3530000 0a000002 (e5930720) [ 16.448716] ---[ end trace a68159f094d85ba6 ]--- [ 16.453526] Kernel panic - not syncing: Fatal exception in interrupt [ 16.460149] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Cc: <stable@vger.kernel.org> # v3.8+ Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker1-6/+2
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: cpsw: remove redundant calls disabling dma interrupts.Richard Cochran1-3/+0
The function, cpsw_intr_disable, already calls cpdma_ctlr_int_ctrl. There is no need to disable the dma interrupts twice. This patch removes the extra calls. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: cpsw: remove redundant calls enabling dma interrupts.Richard Cochran1-2/+0
The function, cpsw_intr_enable, already calls cpdma_ctlr_int_ctrl. There is no need to enable the dma interrupts twice. This patch removes the extra call. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: cpsw: remove two unused global functionsRichard Cochran2-47/+0
The funtions, cpsw_ale_flush and cpsw_ale_set_ageout, have never been used since they were first introduced. This patch removes the dead code. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-25net: cpsw: fix misplaced break statements.Richard Cochran1-2/+2
Having the breaks too far to the left makes parsing the dense switch/case block unnecessarily harder. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-14net: batch of last_rx update avoidance in ethernet drivers.françois romieu1-1/+0
None of those drivers uses last_rx for its own needs. See 4dc89133f49b8cfd77ba7e83f5960aed63aaa99e ("net: add a comment on netdev->last_rx") for reference. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Zhangfei Gao <zhangfei.gao@linaro.org> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12netcp: Replace put_page(virt_to_head_page(ptr)) w/ skb_free_fragAlexander Duyck1-1/+1
Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-27net: netcp: remove call to netif_carrier_(on/off) for MAC to Phy interfaceKaricheri, Muralidharan1-2/+6
Currently when interface type is MAC to Phy, netif_carrier_(on/off) is called which is not needed as Phy lib already updates the carrier status to net stack. This is needed only for other interface types Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: cpts: use helpers for converting ns to timespec.Richard Cochran1-5/+2
This patch changes the driver to use ns_to_timespec64() and timespec64_to_ns() instead of open coding the same logic. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31ptp: cpts: convert to the 64 bit get/set time methods.Richard Cochran1-6/+6
This driver's clock is implemented using a timecounter, and so with this patch the driver is ready for the year 2038. Compile tested only. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: netcp: ethss: enhancement to support NetCP 1.5 ethssWingMan Kwok1-36/+884
NetCP 1.5 available on newer K2 SoCs such as K2E and K2L introduced 3 variants of the ethss subsystem, 9 port, 5 port and 2 port. These have one host port towards the CPU and N external slave ports. To customize the driver for these new ethss sub systems, multiple compatibility strings are introduced. Currently some of parameters that are different on different variants such as number of ALE ports, stats modules and number of ports are defined through constants. These are now changed to variables in gbe_priv data that get set based on the compatibility string. This is required as there are no hardware identification registers available to distinguish among the variants of NetCP 1.5 ethss. However there is identification register available to differentiate between NetCP 1.4 vs NetCP 1.5 and the same is made use of in the code to differentiate them. For more reading on the details of this peripheral, please refer to the User Guide available at http://www.ti.com/lit/pdf/spruhz3 Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: netcp: enclose macros in parenthesesKaricheri, Muralidharan1-251/+272
Fix following checkpatch error. It seems to have passed checkpatch last time when original code was introduced. ERROR: Macros with complex values should be enclosed in parentheses #172: FILE: drivers/net/ethernet/ti/netcp_ethss.c:869: Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: netcp: select davinci_mdio driver by defaultKaricheri, Muralidharan1-0/+1
Keystone netcp driver re-uses davinci mdio driver. So enable it by default for keystone netcp driver. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: netcp: use separate reg region for individual ethss modulesKaricheri, Muralidharan1-37/+93
Ethss has multiple modules within the sub system - switch sub system - sgmii - mdio - switch module NetCP driver re-uses existing davinci mdio driver. It requires to have its own register region to map the reg space. So restructure the code to use separate reg region for the individual modules it manages. Use range property to define register space of NetCP and use reg property to define individual reg spaces. So MDIO will have its own reg space to map. This is a pre-requisite to enable MDIO driver for NetCP. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20net: netcp: fix forward port number usage for 10G ethssKaricheri, Muralidharan3-13/+29
10G switch requires forward port number in the taginfo field, where as it should be in packet_info field for necp 1.4 Ethss. So fill this value correctly in the knav dma descriptor. Also rename dma_psflags field in struct netcp_tx_pipe to switch_to_port as it contain no flag, but the switch port number for forwarding the packet. Add a flag to hold the new flag, SWITCH_TO_PORT_IN_TAGINFO which will be set for 10G. This can also used in the future for other flags for the tx_pipe. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> CC: "David S. Miller" <davem@davemloft.net> CC: Mugunthan V N <mugunthanvnm@ti.com> CC: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: Christoph Jaeger <cj@linux.com> CC: Lokesh Vutla <lokeshvutla@ti.com> CC: Markus Pargmann <mpa@pengutronix.de> CC: Kumar Gala <galak@codeaurora.org> CC: Ian Campbell <ijc+devicetree@hellion.org.uk> CC: Mark Rutland <mark.rutland@arm.com> CC: Pawel Moll <pawel.moll@arm.com> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: netcp: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-08ethernet: codespell comment spelling fixesJoe Perches1-1/+1
To test a checkpatch spelling patch, I ran codespell against drivers/net/ethernet/. $ git ls-files drivers/net/ethernet/ | \ while read file ; do \ codespell -w $file; \ done I removed a false positive in e1000_hw.h Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-9/+9
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-7/+7
Pull networking fixes from David Miller: 1) If an IPVS tunnel is created with a mixed-family destination address, it cannot be removed. Fix from Alexey Andriyanov. 2) Fix module refcount underflow in netfilter's nft_compat, from Pablo Neira Ayuso. 3) Generic statistics infrastructure can reference variables sitting on a released function stack, therefore use dynamic allocation always. Fix from Ignacy Gawędzki. 4) skb_copy_bits() return value test is inverted in ip_check_defrag(). 5) Fix network namespace exit in openvswitch, we have to release all of the per-net vports. From Pravin B Shelar. 6) Fix signedness bug in CAIF's cfpkt_iterate(), from Dan Carpenter. 7) Fix rhashtable grow/shrink behavior, only expand during inserts and shrink during deletes. From Daniel Borkmann. 8) Netdevice names with semicolons should never be allowed, because they serve as a separator. From Matthew Thode. 9) Use {,__}set_current_state() where appropriate, from Fabian Frederick. 10) Revert byte queue limits support in r8169 driver, it's causing regressions we can't figure out. 11) tcp_should_expand_sndbuf() erroneously uses tp->packets_out to measure packets in flight, properly use tcp_packets_in_flight() instead. From Neal Cardwell. 12) Fix accidental removal of support for bluetooth in CSR based Intel wireless cards. From Marcel Holtmann. 13) We accidently added a behavioral change between native and compat tasks, wrt testing the MSG_CMSG_COMPAT bit. Just ignore it if the user happened to set it in a native binary as that was always the behavior we had. From Catalin Marinas. 14) Check genlmsg_unicast() return valud in hwsim netlink tx frame handling, from Bob Copeland. 15) Fix stale ->radar_required setting in mac80211 that can prevent starting new scans, from Eliad Peller. 16) Fix memory leak in nl80211 monitor, from Johannes Berg. 17) Fix race in TX index handling in xen-netback, from David Vrabel. 18) Don't enable interrupts in amx-xgbe driver until all software et al. state is ready for the interrupt handler to run. From Thomas Lendacky. 19) Add missing netlink_ns_capable() checks to rtnl_newlink(), from Eric W Biederman. 20) The amount of header space needed in macvtap was not calculated properly, fix it otherwise we splat past the beginning of the packet. From Eric Dumazet. 21) Fix bcmgenet TCP TX perf regression, from Jaedon Shin. 22) Don't raw initialize or mod timers, use setup_timer() and mod_timer() instead. From Vaishali Thakkar. 23) Fix software maintained statistics in bcmgenet and systemport drivers, from Florian Fainelli. 24) DMA descriptor updates in sh_eth need proper memory barriers, from Ben Hutchings. 25) Don't do UDP Fragmentation Offload on RAW sockets, from Michal Kubecek. 26) Openvswitch's non-masked set actions aren't constructed properly into netlink messages, fix from Joe Stringer. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits) openvswitch: Fix serialization of non-masked set actions. gianfar: Reduce logging noise seen due to phy polling if link is down ibmveth: Add function to enable live MAC address changes net: bridge: add compile-time assert for cb struct size udp: only allow UFO for packets from SOCK_DGRAM sockets sh_eth: Really fix padding of short frames on TX Revert "sh_eth: Enable Rx descriptor word 0 shift for r8a7790" sh_eth: Fix RX recovery on R-Car in case of RX ring underrun sh_eth: Ensure proper ordering of descriptor active bit write/read net/mlx4_en: Disbale GRO for incoming loopback/selftest packets net/mlx4_core: Fix wrong mask and error flow for the update-qp command net: systemport: fix software maintained statistics net: bcmgenet: fix software maintained statistics rxrpc: don't multiply with HZ twice rxrpc: terminate retrans loop when sending of skb fails net/hsr: Fix NULL pointer dereference and refcnt bugs when deleting a HSR interface. net: pasemi: Use setup_timer and mod_timer net: stmmac: Use setup_timer and mod_timer net: 8390: axnet_cs: Use setup_timer and mod_timer net: 8390: pcnet_cs: Use setup_timer and mod_timer ...
2015-03-03ethernet: Use eth_<foo>_addr instead of memsetJoe Perches1-1/+1
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: ti: cpsw: add hibernation callbacksGrygorii Strashko1-4/+3
Setting a dev_pm_ops suspend/resume pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SIMPLE_DEV_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move cpsw_suspend/resume calbacks under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-01net: davinci_mdio: add hibernation callbacksGrygorii Strashko1-2/+3
Setting a dev_pm_ops suspend_late/resume_early pair but not a set of hibernation functions means those pm functions will not be called upon hibernation. Fix this by using SET_LATE_SYSTEM_SLEEP_PM_OPS, which appropriately assigns the suspend and hibernation handlers and move davinci_mdio_x callbacks under CONFIG_PM_SLEEP to avoid build warnings. Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28drivers: net: cpsw: Set SECURE for dual_emac ucastGeorge McCollister1-1/+1
Prior to this patch, sending a packet with the source MAC address of one of the CPSW interfaces to one of the CPSW slave ports while it's configured in dual_emac mode would update the port_num field of the VLAN/Unicast Address Table Entry. This would cause it to discard all incoming traffic addressed to that MAC address, essentially rendering the port useless until the ALE table is cleared (by starting and stopping the interface or rebooting.) For example, if eth0 has a MAC address of 90:59:af:8f:43:e9 it will have an ALE table entry: 00 00 00 00 59 90 02 30 e9 43 8f af (VLAN Addr vlan_id=2 unicast type=0 port_num=0 addr=90:59:af:8f:43:e9) If you configure another device with the same MAC address and connect it to the first CPSW slave port and send some traffic the ALE table entry becomes: 04 00 00 00 59 90 02 30 e9 43 8f af (VLAN Addr vlan_id=2 unicast type=0 port_num=1 addr=90:59:af:8f:43:e9) >From this point forward all incoming traffic addressed to 90:59:af:8f:43:e9 will be dropped. Setting the SECURE bit for the VLAN/Unicast address table entry for each interface's MAC address corrects the problem. Signed-off-by: George McCollister <george.mccollister@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-19Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuildLinus Torvalds1-2/+2
Pull kconfig updates from Michal Marek: "Yann E Morin was supposed to take over kconfig maintainership, but this hasn't happened. So I'm sending a few kconfig patches that I collected: - Fix for missing va_end in kconfig - merge_config.sh displays used if given too few arguments - s/boolean/bool/ in Kconfig files for consistency, with the plan to only support bool in the future" * 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kconfig: use va_end to match corresponding va_start merge_config.sh: Display usage if given too few arguments kconfig: use bool instead of boolean for type definition attributes
2015-02-05net: ethernet: ti/cpsw-common.c: fix sparse warningLad, Prabhakar1-0/+2
this patch fixes following sparse warning: cpsw-common.c:23:5: warning: symbol 'cpsw_am33xx_cm_get_macid' was not declared. Should it be static? Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.