aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/tile/tilegx.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2017-01-30drivers: net: generalize napi_complete_done()Eric Dumazet1-1/+1
napi_complete_done() allows to opt-in for gro_flush_timeout, added back in linux-3.19, commit 3b47d30396ba ("net: gro: add a per device gro flush timer") This allows for more efficient GRO aggregation without sacrifying latencies. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-25ktime: Cleanup ktime_set() usageThomas Gleixner1-2/+2
ktime_set(S,N) was required for the timespec storage type and is still useful for situations where a Seconds and Nanoseconds part of a time value needs to be converted. For anything where the Seconds argument is 0, this is pointless and can be replaced with a simple assignment. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org>
2016-10-18ethernet/tile: use core min/max MTU checkingJarod Wilson1-13/+8
tilegx: min_mtu 68, max_mtu 1500 or 9000, depending on modparam - remove tile_net_change_mtu now that it is fully redundant tilepro: min_mtu 68, max_mtu 1500 - hardware supports jumbo packets up to 10226, but it's not implemented or tested yet, according to code comments CC: netdev@vger.kernel.org CC: Chris Metcalf <cmetcalf@mellanox.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: tilegx: use correct timespec64 typeArnd Bergmann1-3/+3
The conversion to the 64-bit time based ptp methods left two instances of 'struct timespec' in place. This is harmless because 64-bit architectures define timespec64 as timespec, and this driver is not used on 32-bit machines. However, using 'struct timespec64' directly is obviously the right thing to do, and will help us remove 'struct timespec' in the future. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: b9acf24f779c ("ptp: tilegx: convert to the 64 bit get/set time methods.") Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-07-29nohz: Prevent tilegx network driver interruptsChris Metcalf1-1/+3
Normally the tilegx networking shim sends irqs to all the cores to distribute the load of processing incoming-packet interrupts, so that you can get to multiple Gb's of traffic inbound. However, in nohz_full mode we don't want to interrupt the nohz_full cores by default, so we limit the set of cores we use to only the online housekeeping cores. To make client code easier to read, we introduce a new nohz_full accessor, housekeeping_cpumask(), which returns a pointer to the housekeeping_mask if nohz_full is enabled, and otherwise returns the cpu_possible_mask. Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com> Cc: Christoph Lameter <cl@linux.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Preeti U Murthy <preeti@linux.vnet.ibm.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2015-04-20Merge tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linuxLinus Torvalds1-2/+2
Pull final removal of deprecated cpus_* cpumask functions from Rusty Russell: "This is the final removal (after several years!) of the obsolete cpus_* functions, prompted by their mis-use in staging. With these function removed, all cpu functions should only iterate to nr_cpu_ids, so we finally only allocate that many bits when cpumasks are allocated offstack" * tag 'cpumask-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (25 commits) cpumask: remove __first_cpu / __next_cpu cpumask: resurrect CPU_MASK_CPU0 linux/cpumask.h: add typechecking to cpumask_test_cpu cpumask: only allocate nr_cpumask_bits. Fix weird uses of num_online_cpus(). cpumask: remove deprecated functions. mips: fix obsolete cpumask_of_cpu usage. x86: fix more deprecated cpu function usage. ia64: remove deprecated cpus_ usage. powerpc: fix deprecated CPU_MASK_CPU0 usage. CPU_MASK_ALL/CPU_MASK_NONE: remove from deprecated region. staging/lustre/o2iblnd: Don't use cpus_weight staging/lustre/libcfs: replace deprecated cpus_ calls with cpumask_ staging/lustre/ptlrpc: Do not use deprecated cpus_* functions blackfin: fix up obsolete cpu function usage. parisc: fix up obsolete cpu function usage. tile: fix up obsolete cpu function usage. arm64: fix up obsolete cpu function usage. mips: fix up obsolete cpu function usage. x86: fix up obsolete cpu function usage. ...
2015-03-31ptp: tilegx: convert to the 64 bit get/set time methods.Richard Cochran1-4/+5
This driver is 64 bit only, and so this driver and device are ready for 2038. This patch changes the driver to the new PHC and also carries the timespec64 parameter on out to the gxio_mpipe_get- set_timestamp functions, making explicit the fact that the tv_sec field is 64 bits wide. Not even compile tested. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Chris Metcalf <cmetcalf@ezchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05drivers: fix up obsolete cpu function usage.Rusty Russell1-2/+2
Thanks to spatch, plus manual removal of "&*". Then a sweep for for_each_cpu_mask => for_each_cpu. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Chris Metcalf <cmetcalf@ezchip.com> Cc: netdev@vger.kernel.org
2015-02-13tile: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo1-3/+2
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-26drivers/net/ethernet/tile: __get_cpu_var call introduced in 3.14Christoph Lameter1-2/+2
Another case was merged for 3.14-rc1 Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26drivers/net/ethernet/tile: Replace __get_cpu_var uses for address calculationChristoph Lameter1-9/+9
Replace with this_cpu_ptr. Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-07-15net: set name_assign_type in alloc_netdev()Tom Gundersen1-2/+2
Extend alloc_netdev{,_mq{,s}}() to take name_assign_type as argument, and convert all users to pass NET_NAME_UNKNOWN. Coccinelle patch: @@ expression sizeof_priv, name, setup, txqs, rxqs, count; @@ ( -alloc_netdev_mqs(sizeof_priv, name, setup, txqs, rxqs) +alloc_netdev_mqs(sizeof_priv, name, NET_NAME_UNKNOWN, setup, txqs, rxqs) | -alloc_netdev_mq(sizeof_priv, name, setup, count) +alloc_netdev_mq(sizeof_priv, name, NET_NAME_UNKNOWN, setup, count) | -alloc_netdev(sizeof_priv, name, setup) +alloc_netdev(sizeof_priv, name, NET_NAME_UNKNOWN, setup) ) v9: move comments here from the wrong commit Signed-off-by: Tom Gundersen <teg@jklm.no> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-16net: tile: fix unused variable warningChris Metcalf1-1/+0
'i' is unused in tile_net_dev_init() after commit d581ebf5a1f ("net: tile: Use helpers from linux/etherdevice.h to check/set MAC"). Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1-10/+3
Pull networking updates from David Miller: 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov. 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J Benniston. 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn Mork. 4) BPF now has a "random" opcode, from Chema Gonzalez. 5) Add more BPF documentation and improve test framework, from Daniel Borkmann. 6) Support TCP fastopen over ipv6, from Daniel Lee. 7) Add software TSO helper functions and use them to support software TSO in mvneta and mv643xx_eth drivers. From Ezequiel Garcia. 8) Support software TSO in fec driver too, from Nimrod Andy. 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli. 10) Handle broadcasts more gracefully over macvlan when there are large numbers of interfaces configured, from Herbert Xu. 11) Allow more control over fwmark used for non-socket based responses, from Lorenzo Colitti. 12) Do TCP congestion window limiting based upon measurements, from Neal Cardwell. 13) Support busy polling in SCTP, from Neal Horman. 14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru. 15) Bridge promisc mode handling improvements from Vlad Yasevich. 16) Don't use inetpeer entries to implement ID generation any more, it performs poorly, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits) rtnetlink: fix userspace API breakage for iproute2 < v3.9.0 tcp: fixing TLP's FIN recovery net: fec: Add software TSO support net: fec: Add Scatter/gather support net: fec: Increase buffer descriptor entry number net: fec: Factorize feature setting net: fec: Enable IP header hardware checksum net: fec: Factorize the .xmit transmit function bridge: fix compile error when compiling without IPv6 support bridge: fix smatch warning / potential null pointer dereference via-rhine: fix full-duplex with autoneg disable bnx2x: Enlarge the dorq threshold for VFs bnx2x: Check for UNDI in uncommon branch bnx2x: Fix 1G-baseT link bnx2x: Fix link for KR with swapped polarity lane sctp: Fix sk_ack_backlog wrap-around problem net/core: Add VF link state control policy net/fsl: xgmac_mdio is dependent on OF_MDIO net/fsl: Make xgmac_mdio read error message useful net_sched: drr: warn when qdisc is not work conserving ...
2014-05-30net: tile: Remove unnecessary memset of netdev private dataTobias Klauser1-1/+0
The memory for private data is allocated using kzalloc/vzalloc in alloc_netdev_mqs, thus there is no need to zero it again in the driver. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-30net: tile: Use helpers from linux/etherdevice.h to check/set MACTobias Klauser1-9/+3
Use is_zero_ether_addr() to check for the MAC address being all zeros instead of open coding the check. Also use ether_addr_copy() instead of a manual memcpy() to set the netdev->dev_addr. Furthermore, get rid of a redundant assignment of netdev->addr_len. This is already set by ether_setup() which is called in tile_net_setup(). Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-16tile: net: Use irq_alloc/free_hwirqThomas Gleixner1-3/+3
No functional change. Just convert to the new interface. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Grant Likely <grant.likely@linaro.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Link: http://lkml.kernel.org/r/20140507154337.410843062@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-03-21ptp: drivers: set the number of programmable pins.Richard Cochran1-0/+1
This patch updates the many PTP Hardware Clock drivers with the newly introduced field that advertises the number of programmable pins. Some of these devices do have programmable pins, but the implementation will have to wait for follow on patches. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14tilegx: Don't receive packets when the napi budget == 0Eric W. Biederman1-0/+3
Processing any incoming packets with a with a napi budget of 0 is incorrect driver behavior. This matters as netpoll will shortly call drivers with a budget of 0 to avoid receive packet processing happening in hard irq context. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-17netdevice: add queue selection fallback handler for ndo_select_queueDaniel Borkmann1-1/+1
Add a new argument for ndo_select_queue() callback that passes a fallback handler. This gets invoked through netdev_pick_tx(); fallback handler is currently __netdev_pick_tx() as most drivers invoke this function within their customized implementation in case for skbs that don't need any special handling. This fallback handler can then be replaced on other call-sites with different queue selection methods (e.g. in packet sockets, pktgen etc). This also has the nice side-effect that __netdev_pick_tx() is then only invoked from netdev_pick_tx() and export of that function to modules can be undone. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+2
2014-01-10net: core: explicitly select a txq before doing l2 forwardingJason Wang1-1/+2
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-27tile_net: Always enable PTP clock support on TILE-GxBen Hutchings1-24/+0
All other net drivers with PTP support enable it unconditionally. Make tile_net consistent with this. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-21tile_net: Implement the SIOCGHWTSTAMP ioctlBen Hutchings1-3/+19
Compile-tested only (thanks to the kbuild test robot). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-10-02net:drivers/net: Miscellaneous conversions to ETH_ALENJoe Perches1-1/+1
Convert the memset/memcpy uses of 6 to ETH_ALEN where appropriate. Also convert some struct definitions and u8 array declarations of [6] to ETH_ALEN. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-11net: tilegx driver: avoid compiler warningChris Metcalf1-3/+3
The "id" variable was being incremented in common code, but only initialized and used in IPv4 code. We move the increment to the IPv4 code too, and then legitimately use the uninitialized_var() macro to avoid the gcc 4.6 warning that 'id' may be used uninitialized. Note that gcc 4.7 does not warn. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-03drivers/net: Convert uses of compare_ether_addr to ether_addr_equalJoe Perches1-1/+1
Use the new bool function ether_addr_equal to add some clarity and reduce the likelihood for misuse of compare_ether_addr for sorting. Done via cocci script: (and a little typing) $ cat compare_ether_addr.cocci @@ expression a,b; @@ - !compare_ether_addr(a, b) + ether_addr_equal(a, b) @@ expression a,b; @@ - compare_ether_addr(a, b) + !ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) == 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !ether_addr_equal(a, b) != 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) == 0 + !ether_addr_equal(a, b) @@ expression a,b; @@ - ether_addr_equal(a, b) != 0 + ether_addr_equal(a, b) @@ expression a,b; @@ - !!ether_addr_equal(a, b) + ether_addr_equal(a, b) Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05tile: fix missing unlock on error in tile_net_open()Wei Yongjun1-1/+3
Add the missing unlock before return from function tile_net_open() in the error handling case. Introduced by commit f3286a3af89d6db7a488f3e8f02b98d67d50f00c. (tile: support multiple mPIPE shims in tilegx network driver) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support PTP using the tilegx mPIPE (IEEE 1588)Chris Metcalf1-1/+215
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: remove deprecated NETIF_F_LLTX flag from tile driversChris Metcalf1-1/+0
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: make "tile_net.custom" a proper bool module parameterChris Metcalf1-5/+5
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support TSO for IPv6 in tilegx network driverChris Metcalf1-15/+29
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support multiple mPIPE shims in tilegx network driverChris Metcalf1-210/+341
The initial driver support was for a single mPIPE shim on the chip (as is the case for the Gx36 hardware). The Gx72 chip has two mPIPE shims, so we extend the driver to handle that case. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: enable GRO in the tilegx network driverChris Metcalf1-1/+1
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: fix panic bug in napi support for tilegx network driverChris Metcalf1-32/+33
The code used to call napi_disable() in an interrupt handler (from smp_call_function), which in turn could call msleep(). Unfortunately you can't sleep in an interrupt context. Luckily it turns out all the NAPI support functions are just operating on data structures and not on any deeply per-cpu data, so we can arrange to set up and tear down all the NAPI state on the core driving the process, and just do the IRQ enable/disable as a smp_call_function thing. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: update dev->stats directly in tilegx network driverChris Metcalf1-21/+8
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: support jumbo frames in the tilegx network driverChris Metcalf1-159/+188
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-01tile: set hw_features and vlan_features in setupChris Metcalf1-4/+11
This change allows the user to configure various features of the tile networking drivers on and off. There is no change to the default initialization state of either the tilegx or tilepro drivers. Neither driver needs the ndo_fix_features or ndo_set_features callbacks, since the generic code already handles the dependencies for fix_features, and there is no hardware state to tweak in set_features. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-02tile: support new Tilera hypervisorChris Metcalf1-1/+1
The Tilera hypervisor shipped in releases up through MDE 4.1 launches the client operating system (i.e. Linux) at privilege level 1 (PL1). Starting with MDE 4.2, as part of the work to enable KVM, the Tilera hypervisor launches Linux at PL2 instead. This commit makes the KERNEL_PL option default to 2 for tilegx, while still saying at 1 for tilepro, which doesn't have an updated hypervisor. It also explains how and when you might want to choose another value. In addition, we change a small buglet in the on-chip Ethernet driver, where we were failing to use the KERNEL_PL constant in an API call. To make the transition cleaner, this change also provides the updated hv_init() API for the new hypervisor that supports announcing Linux's compiled-in PL, so the hypervisor can generate a suitable error in the case of a mismatched hypervisor and Linux binary. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable@vger.linux.org
2012-11-16tilegx: request_irq with a non-null device nameSimon Marchi1-1/+1
This patch simply makes the tilegx net driver call request_irq with a non-null name. It makes the output in /proc/interrupts more obvious, but also helps tools that don't expect to find null there. Signed-off-by: Simon Marchi <simon.marchi@polymtl.ca> Acked-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-26tilegx: fix some issues in the SW TSO supportChris Metcalf1-16/+19
This change correctly computes the header length and data length in the fragments to avoid a bug where we would end up with extremely slow performance. Also adopt use of skb_frag_size() accessor. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Cc: stable@vger.kernel.org [v3.6] Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-18tilegx net: use eth_hw_addr_random(), not eth_random_addr()Chris Metcalf1-1/+1
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18tilegx net driver: handle payload data not in fragsChris Metcalf1-18/+18
The original driver implementation assumed that for TSO, all the payload data would be in the frags. This isn't always true; change the driver to support payload data at skb->data between "skb_transport_offset(skb) + tcp_hdrlen(skb)" and "skb->hdr_len", followed by the data in the frags. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-18net: tilegx driver bugfix (be explicit about percpu queue number)Chris Metcalf1-8/+15
Avoid packets belonging to queue/cpu A trying to transmit on cpu B. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2012-07-16ethernet: Use eth_random_addrJoe Perches1-1/+1
Convert the existing uses of random_ether_addr to the new eth_random_addr. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11tilegx network driver: initial supportChris Metcalf1-0/+1898
This change adds support for the tilegx network driver based on the GXIO IORPC support in the tilegx software stack, using the on-chip mPIPE packet processing engine. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.