aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/xilinx/ll_temac_main.c (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-05-23net: ll_temac: Fix compile errorEsben Haabendal1-2/+1
Fixes: 1b3fa5cf859b ("net: ll_temac: Cleanup multicast filter on change") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Enable multicast supportEsben Haabendal1-2/+1
Multicast support have been tested and is working now. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Cleanup multicast filter on changeEsben Haabendal1-2/+5
Avoid leaving old address table entries when using multicast. If more than one multicast address were removed, only the first removed address would actually be cleared. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Prepare indirect register access for multicast supportEsben Haabendal1-75/+165
With .ndo_set_rx_mode/temac_set_multicast_list() being called in atomic context (holding addr_list_lock), and temac_set_multicast_list() needing to access temac indirect registers, the mutex used to synchronize indirect register is a no-no. Replace it with a spinlock, and avoid sleeping in temac_indirect_busywait(). To avoid excessive holding of the lock, which is now a spinlock, the temac_device_reset() function is changed to only hold the lock for short periods. With timeouts, it could be holding the spinlock for more than 2 seconds. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-23net: ll_temac: Do not make promiscuous mode sticky on multicastEsben Haabendal1-7/+0
When user has requested IFF_ALLMULTI or have set more than 4 multicast addresses, we should just use promiscuous mode, but not set it in flags, as it causes the interface to stay in promiscuous mode even when the non-IFF_PROMISC condition that caused promiscuous mode to be enabled has gone away. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner1-0/+1
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-10net: ethernet: fix similar warning reported by kbuild test robotPetr Štetiar1-1/+1
This patch fixes following (similar) warning reported by kbuild test robot: In function ‘memcpy’, inlined from ‘smsc75xx_init_mac_address’ at drivers/net/usb/smsc75xx.c:778:3, inlined from ‘smsc75xx_bind’ at drivers/net/usb/smsc75xx.c:1501:2: ./include/linux/string.h:355:9: warning: argument 2 null where non-null expected [-Wnonnull] return __builtin_memcpy(p, q, size); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/usb/smsc75xx.c: In function ‘smsc75xx_bind’: ./include/linux/string.h:355:9: note: in a call to built-in function ‘__builtin_memcpy’ I've replaced the offending memcpy with ether_addr_copy, because I'm 100% sure, that of_get_mac_address can't return NULL as it returns valid pointer or ERR_PTR encoded value, nothing else. I'm hesitant to just change IS_ERR into IS_ERR_OR_NULL check, as this would make the warning disappear also, but it would be confusing to check for impossible return value just to make a compiler happy. I'm now changing all occurencies of memcpy to ether_addr_copy after the of_get_mac_address call, as it's very likely, that we're going to get similar reports from kbuild test robot in the future. Fixes: a51645f70f63 ("net: ethernet: support of_get_mac_address new ERR_PTR error") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ll_temac: Improve error message on error IRQEsben Haabendal1-2/+8
The channel status register value can be very helpful when debugging SDMA problems. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar1-1/+1
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: ll_temac: Make some functions staticYueHaibing1-8/+8
Fix sparse warnings: drivers/net/ethernet/xilinx/ll_temac_main.c:66:5: warning: symbol '_temac_ior_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:71:6: warning: symbol '_temac_iow_be' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:76:5: warning: symbol '_temac_ior_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:81:6: warning: symbol '_temac_iow_le' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:648:6: warning: symbol 'ptr_to_txbd' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:654:6: warning: symbol 'ptr_from_txbd' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: ll_temac: Fix an NULL vs IS_ERR() check in temac_open()Dan Carpenter1-2/+2
The phy_connect() function doesn't return NULL pointers. It returns error pointers on error, so I have updated the check. Fixes: 8425c41d1ef7 ("net: ll_temac: Extend support to non-device-tree platforms") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-02net: ll_temac: Fix typo bug for 32-bitEsben Haabendal1-1/+1
Fixes: d84aec42151b ("net: ll_temac: Fix support for 64-bit platforms") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Enable DMA when ready, not beforeEsben Haabendal1-5/+10
As soon as TAILDESCR_PTR is written, DMA transfers might start. Let's ensure we are ready to receive DMA IRQ's before doing that. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Allow configuration of IRQ coalescingEsben Haabendal1-12/+28
This allows custom setup of IRQ coalescing for platforms using legacy platform_device. The irq timeout and count parameters can be used for tuning cpu load vs. latency. I have maintained the 0x00000400 bit in TX_CHNL_CTRL. It is specified as unused in the documentation I have available. It does not make any difference in the hardware I have available, so it is left in to not risk breaking other platforms where it might be used. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Replace bad usage of msleep() with usleep_range()Esben Haabendal1-1/+1
Use usleep_range() to avoid problems with msleep() actually sleeping much longer than expected. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Fix bug causing buffer descriptor overrunEsben Haabendal1-1/+1
As we are actually using a BD for both the skb and each frag contained in it, the oldest TX BD would be overwritten when there was exactly one BD less than needed. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Fix iommu/swiotlb leakEsben Haabendal1-1/+1
Unmap the actual buffer length, not the amount of data received, avoiding resource exhaustion of swiotlb (seen on x86_64 platform). Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Support indirect_mutex share within TEMAC IPEsben Haabendal1-11/+25
Indirect register access goes through a DCR bus bridge, which allows only one outstanding transaction. And to make matters worse, each TEMAC IP block contains two Ethernet interfaces, and although they seem to have separate registers for indirect access, they actually share the registers. Or to be more specific, MSW, LSW and CTL registers are physically shared between Ethernet interfaces in same TEMAC IP, with RDY register being (almost) specificic to the Ethernet interface. The 0x10000 bit in RDY reflects combined bus ready state though. So we need to take care to synchronize not only within a single device, but also between devices in same TEMAC IP. This commit allows to do that with legacy platform devices. For OF devices, the xlnx,compound parent of the temac node should be used to find siblings, and setup a shared indirect_mutex between them. I will leave this work to somebody else, as I don't have hardware to test that. No regression is introduced by that, as before this commit using two Ethernet interfaces in same TEMAC block is simply broken. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Fix support for little-endian platformsEsben Haabendal1-39/+50
Both TEMAC and SDMA is big-endian, so make sure that all values in SDMA buffer descriptors (cmdac_bd) are handled as big-endian, independent of the host endianness. With all currently supported platforms being big-endian, this change does not make a change for any of them. Note, when using app3 and app4 for piggybacking skb pointers there is no need to care about endianness, as neither TEMAC nor SDMA access app3 and app4 in TX buffer descriptors. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Add support for non-native register endiannessEsben Haabendal1-18/+69
Replace the powerpc specific MMIO register access functions with the generic big-endian mmio access functions, and add support for little-endian access depending on configuration. Big-endian access is maintained as the default, but little-endian can be configured in device-tree binding or in platform data. The temac_ior()/temac_iow() functions are replaced with macro wrappers to avoid modifying existing code more than necessary. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Fix support for 64-bit platformsEsben Haabendal1-3/+32
The use of buffer descriptor APP4 field (32-bit) for storing skb pointer obviously does not work on 64-bit platforms. As APP3 is also unused, we can use that to store the other half of 64-bit pointer values. Contrary to what is hinted at in commit message of commit 15bfe05c8d63 ("net: ethernet: xilinx: Mark XILINX_LL_TEMAC broken on 64-bit") there are no other pointers stored in cdmac_bd. Signed-off-by: Esben Haabendal <esben@geanix.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Extend support to non-device-tree platformsEsben Haabendal1-62/+125
Support initialization with platdata, so the driver can be used on non-device-tree platforms. For currently supported device-tree platforms, the driver should behave as before. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-01net: ll_temac: Fix and simplify error handling by using devres functionsEsben Haabendal1-31/+17
As a side effect, a few error cases are fixed. If of_iomap() of sdma_regs failed, no error code was returned. Fixed to return -ENOMEM similar to of_iomap() fail of regs. If sysfs_create_group() or register_netdev() failed, lp->phy_node was not released. Finally, the order in remove function is corrected to be reverse order of what is done in probe, i.e. calling temac_mdio_teardown() last, so we unregister the netdev that most likely is using the mdio_bus first. Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-14net: xilinx: replace dev_kfree_skb_irq by dev_consume_skb_irq for drop profilesYang Wei1-1/+1
dev_consume_skb_irq() should be called when skb xmit done. It makes drop profiles(dropwatch, perf) more friendly. Signed-off-by: Yang Wei <yang.wei9@zte.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-01-08cross-tree: phase out dma_zalloc_coherent()Luis Chamberlain1-6/+6
We already need to zero out memory for dma_alloc_coherent(), as such using dma_zalloc_coherent() is superflous. Phase it out. This change was generated with the following Coccinelle SmPL patch: @ replace_dma_zalloc_coherent @ expression dev, size, data, handle, flags; @@ -dma_zalloc_coherent(dev, size, handle, flags) +dma_alloc_coherent(dev, size, handle, flags) Suggested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> [hch: re-ran the script on the latest tree] Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-09-19net: xilinx: fix return type of ndo_start_xmit functionYueHaibing1-1/+2
The method ndo_start_xmit() is defined as returning an 'netdev_tx_t', which is a typedef for an enum type, so make sure the implementation in this driver has returns 'netdev_tx_t' value, and change the function return type to netdev_tx_t. Found by coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-24net: Convert to using %pOF instead of full_nameRob Herring1-1/+1
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-12-08net: ll_temac: Utilize of_get_mac_address()Tobias Klauser1-5/+6
Do not open code getting the MAC address exclusively from the "local-mac-address" property, but instead use of_get_mac_address() which looks up the MAC address using the 3 typical property names. Also avoid casting away the const qualifier of the return value by making temac_init_mac_address() take a const void* address. Follows commit b34296a9c047 ("net: ethoc: Utilize of_get_mac_address()"). Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-15net: ethernet: ll_temac: Utilize phy_ethtool_nway_resetFlorian Fainelli1-6/+1
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-12/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-07-14net: ethernet: ll_temac: use phydev from struct net_devicePhilippe Reynes1-21/+16
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phy in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-05-04treewide: replace dev->trans_start update with helperFlorian Westphal1-1/+1
Replace all trans_start updates with netif_trans_update helper. change was done via spatch: struct net_device *d; @@ - d->trans_start = jiffies + netif_trans_update(d) Compile tested only. Cc: user-mode-linux-devel@lists.sourceforge.net Cc: linux-xtensa@linux-xtensa.org Cc: linux1394-devel@lists.sourceforge.net Cc: linux-rdma@vger.kernel.org Cc: netdev@vger.kernel.org Cc: MPT-FusionLinux.pdl@broadcom.com Cc: linux-scsi@vger.kernel.org Cc: linux-can@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: linux-omap@vger.kernel.org Cc: linux-hams@vger.kernel.org Cc: linux-usb@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: linux-s390@vger.kernel.org Cc: devel@driverdev.osuosl.org Cc: b.a.t.m.a.n@lists.open-mesh.org Cc: linux-bluetooth@vger.kernel.org Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Acked-by: Antonio Quartulli <a@unstable.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-07net: ll_temac: Remove sparse warningsMichal Simek1-6/+6
Remove sparse warnings: drivers/net/ethernet/xilinx/ll_temac_main.c:65:16: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:70:9: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:127:16: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:137:9: warning: cast removes address space of expression drivers/net/ethernet/xilinx/ll_temac_main.c:409:3: warning: symbol 'temac_options' was not declared. Should it be static? drivers/net/ethernet/xilinx/ll_temac_main.c:590:6: warning: symbol 'temac_adjust_link' was not declared. Should it be static? Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Four minor merge conflicts: 1) qca_spi.c renamed the local variable used for the SPI device from spi_device to spi, meanwhile the spi_set_drvdata() call got moved further up in the probe function. 2) Two changes were both adding new members to codel params structure, and thus we had overlapping changes to the initializer function. 3) 'net' was making a fix to sk_release_kernel() which is completely removed in 'net-next'. 4) In net_namespace.c, the rtnl_net_fill() call for GET operations had the command value fixed, meanwhile 'net-next' adjusted the argument signature a bit. This also matches example merge resolutions posted by Stephen Rothwell over the past two days. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-12net: ll_temac: Fix DMA map size bugMichal Simek1-2/+2
DMA allocates skb->len instead of headlen which is used for DMA. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11net: ll_temac: Use one return statement instead of twoMichal Simek1-3/+1
Use one return statement instead of two to simplify the code. Both are returning the same value. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17net: xilinx: constify of_device_id arrayFabian Frederick1-1/+1
of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-31net: Xilinx: fix error return codeJulia Lawall1-0/+2
Return a negative error code on failure. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier ret; expression e1,e2; @@ ( if (\(ret < 0\|ret != 0\)) { ... return ret; } | ret = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-21net: Xilinx: Deletion of unnecessary checks before two function callsMarkus Elfring1-2/+1
The functions kfree() and of_node_put() test whether their argument is NULL and then return immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: ll_temac: Remove unnecessary ether_setup after alloc_etherdevSubbaraya Sundeep Bhatta1-1/+0
Calling ether_setup is redundant since alloc_etherdev calls it. Signed-off-by: Subbaraya Sundeep Bhatta <sbhatta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-14net: xilinx: Remove .owner field for driverMichal Simek1-1/+0
There is no need to init .owner field. Based on the patch from Peter Griffin <peter.griffin@linaro.org> "mmc: remove .owner field for drivers using module_platform_driver" This patch removes the superflous .owner field for drivers which use the module_platform_driver API, as this is overriden in platform_driver_register anyway." Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-08ll_temac: delete unneeded test before of_node_putJulia Lawall1-2/+1
Of_node_put supports NULL as its argument, so the initial test is not necessary. Suggested by Uwe Kleine-König. The semantic patch that fixes this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression e; @@ -if (e) of_node_put(e); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-22xilinx: Fix compiler warningManuel Schölling1-1/+1
The time comparsion functions require arguments of type unsigned long instead of (signed) long. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22xilinx: Use time_before_eq()Manuel Schölling1-1/+1
To be future-proof and for better readability the time comparisons are modified to use time_before_eq() instead of plain, error-prone math. Signed-off-by: Manuel Schölling <manuel.schoelling@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-12xilinx: Convert uses of __constant_<foo> to <foo>Joe Perches1-2/+2
The use of __constant_<foo> has been unnecessary for quite awhile now. Make these uses consistent with the rest of the kernel. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-01-16drivers/net: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-02net: do not pretend FRAGLIST supportEric Dumazet1-1/+1
Few network drivers really supports frag_list : virtual drivers. Some drivers wrongly advertise NETIF_F_FRAGLIST feature. If skb with a frag_list is given to them, packet on the wire will be corrupt. Remove this flag, as core networking stack will make sure to provide packets that can be sent without corruption. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Anirudha Sarangi <anirudh@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-07Merge remote-tracking branch 'grant/devicetree/next' into for-nextRob Herring1-0/+6
2013-10-09microblaze: clean-up prom.h implicit includesRob Herring1-0/+1
While powerpc is a mess of implicit includes by prom.h, microblaze just copied this and is easily fixed. Add the necessary explicit includes and remove unnecessary includes and other parts from prom.h Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org> Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Cc: netdev@vger.kernel.org
2013-10-01ll_temac: Reset dma descriptors indexes on ndo_openRicardo Ribalda1-0/+6
The dma descriptors indexes are only initialized on the probe function. If a packet is on the buffer when temac_stop is called, the dma descriptors indexes can be left on a incorrect state where no other package can be sent. So an interface could be left in an usable state after ifdow/ifup. This patch makes sure that the descriptors indexes are in a proper status when the device is open. Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.