aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-12-06lpc_eth: kernel BUG on removeBruno Carneiro da Cunha1-2/+0
We may have found a bug in the nxp/lpc_eth.c driver. The function platform_set_drvdata() is called twice, the second time it is called, in lpc_mii_init(), it overwrites the struct net_device which should be at pdev->dev->driver_data with pldat->mii_bus. When trying to remove the driver, in lpc_eth_drv_remove(), platform_get_drvdata() will return the pldat->mii_bus pointer and try to use it as a struct net_device pointer. This causes unregister_netdev to segfault and generate a kernel BUG. Is this reproducible? Signed-off-by: Daniel Martinez <linux@danielsmartinez.com> Signed-off-by: Bruno Carneiro da Cunha <brunocarneirodacunha@usp.br> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tcp: md5: fix potential overestimation of TCP option spaceEric Dumazet1-2/+3
Back in 2008, Adam Langley fixed the corner case of packets for flows having all of the following options : MD5 TS SACK Since MD5 needs 20 bytes, and TS needs 12 bytes, no sack block can be cooked from the remaining 8 bytes. tcp_established_options() correctly sets opts->num_sack_blocks to zero, but returns 36 instead of 32. This means TCP cooks packets with 4 extra bytes at the end of options, containing unitialized bytes. Fixes: 33ad798c924b ("tcp: options clean up") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Neal Cardwell <ncardwell@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: sched: allow indirect blocks to bind to clsact in TCJohn Hurley1-19/+33
When a device is bound to a clsact qdisc, bind events are triggered to registered drivers for both ingress and egress. However, if a driver registers to such a device using the indirect block routines then it is assumed that it is only interested in ingress offload and so only replays ingress bind/unbind messages. The NFP driver supports the offload of some egress filters when registering to a block with qdisc of type clsact. However, on unregister, if the block is still active, it will not receive an unbind egress notification which can prevent proper cleanup of other registered callbacks. Modify the indirect block callback command in TC to send messages of ingress and/or egress bind depending on the qdisc in use. NFP currently supports egress offload for TC flower offload so the changes are only added to TC. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: core: rename indirect block ingress cb functionJohn Hurley4-36/+34
With indirect blocks, a driver can register for callbacks from a device that is does not 'own', for example, a tunnel device. When registering to or unregistering from a new device, a callback is triggered to generate a bind/unbind event. This, in turn, allows the driver to receive any existing rules or to properly clean up installed rules. When first added, it was assumed that all indirect block registrations would be for ingress offloads. However, the NFP driver can, in some instances, support clsact qdisc binds for egress offload. Change the name of the indirect block callback command in flow_offload to remove the 'ingress' identifier from it. While this does not change functionality, a follow up patch will implement a more more generic callback than just those currently just supporting ingress offload. Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports") Signed-off-by: John Hurley <john.hurley@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net-sysfs: Call dev_hold always in netdev_queue_add_kobjectJouni Hogander1-2/+5
Dev_hold has to be called always in netdev_queue_add_kobject. Otherwise usage count drops below 0 in case of failure in kobject_init_and_add. Fixes: b8eb718348b8 ("net-sysfs: Fix reference count leak in rx|netdev_queue_add_kobject") Reported-by: Hulk Robot <hulkci@huawei.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: David Miller <davem@davemloft.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: dsa: fix flow dissection on Tx pathAlexander Lobakin1-2/+3
Commit 43e665287f93 ("net-next: dsa: fix flow dissection") added an ability to override protocol and network offset during flow dissection for DSA-enabled devices (i.e. controllers shipped as switch CPU ports) in order to fix skb hashing for RPS on Rx path. However, skb_hash() and added part of code can be invoked not only on Rx, but also on Tx path if we have a multi-queued device and: - kernel is running on UP system or - XPS is not configured. The call stack in this two cases will be like: dev_queue_xmit() -> __dev_queue_xmit() -> netdev_core_pick_tx() -> netdev_pick_tx() -> skb_tx_hash() -> skb_get_hash(). The problem is that skbs queued for Tx have both network offset and correct protocol already set up even after inserting a CPU tag by DSA tagger, so calling tag_ops->flow_dissect() on this path actually only breaks flow dissection and hashing. This can be observed by adding debug prints just before and right after tag_ops->flow_dissect() call to the related block of code: Before the patch: Rx path (RPS): [ 19.240001] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.244271] tag_ops->flow_dissect() [ 19.247811] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 19.215435] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 19.219746] tag_ops->flow_dissect() [ 19.223241] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 18.654057] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 18.658332] tag_ops->flow_dissect() [ 18.661826] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 18.759560] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 18.763933] tag_ops->flow_dissect() [ 18.767485] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 22.800020] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 22.804392] tag_ops->flow_dissect() [ 22.807921] Tx: proto: 0x920b, nhoff: 34 /* junk */ [ 16.898342] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ [ 16.902705] tag_ops->flow_dissect() [ 16.906227] Tx: proto: 0x920b, nhoff: 34 /* junk */ After: Rx path (RPS): [ 16.520993] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 16.525260] tag_ops->flow_dissect() [ 16.528808] Rx: proto: 0x0800, nhoff: 8 /* ETH_P_IP */ [ 15.484807] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 15.490417] tag_ops->flow_dissect() [ 15.495223] Rx: proto: 0x0806, nhoff: 8 /* ETH_P_ARP */ [ 17.134621] Rx: proto: 0x00f8, nhoff: 0 /* ETH_P_XDSA */ [ 17.138895] tag_ops->flow_dissect() [ 17.142388] Rx: proto: 0x8100, nhoff: 8 /* ETH_P_8021Q */ Tx path (UP system): [ 15.499558] Tx: proto: 0x0800, nhoff: 26 /* ETH_P_IP */ [ 20.664689] Tx: proto: 0x0806, nhoff: 26 /* ETH_P_ARP */ [ 18.565782] Tx: proto: 0x86dd, nhoff: 26 /* ETH_P_IPV6 */ In order to fix that we can add the check 'proto == htons(ETH_P_XDSA)' to prevent code from calling tag_ops->flow_dissect() on Tx. I also decided to initialize 'offset' variable so tagger callbacks can now safely leave it untouched without provoking a chaos. Fixes: 43e665287f93 ("net-next: dsa: fix flow dissection") Signed-off-by: Alexander Lobakin <alobakin@dlink.ru> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic4-16/+12
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: avoid an indirect call in ____sys_recvmsg()Eric Dumazet1-1/+6
CONFIG_RETPOLINE=y made indirect calls expensive. gcc seems to add an indirect call in ____sys_recvmsg(). Rewriting the code slightly makes sure to avoid this indirection. Alternative would be to not call sock_recvmsg() and instead use security_socket_recvmsg() and sock_recvmsg_nosec(), but this is less readable IMO. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Cc: David Laight <David.Laight@aculab.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06phy: mdio-thunder: add missed pci_release_regions in removeChuhong Yuan1-0/+1
The driver forgets to call pci_release_regions() in remove like that in probe failure. Add the missed call to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06tipc: fix ordering of tipc module init and exit routineTaehee Yoo1-14/+15
In order to set/get/dump, the tipc uses the generic netlink infrastructure. So, when tipc module is inserted, init function calls genl_register_family(). After genl_register_family(), set/get/dump commands are immediately allowed and these callbacks internally use the net_generic. net_generic is allocated by register_pernet_device() but this is called after genl_register_family() in the __init function. So, these callbacks would use un-initialized net_generic. Test commands: #SHELL1 while : do modprobe tipc modprobe -rv tipc done #SHELL2 while : do tipc link list done Splat looks like: [ 59.616322][ T2788] kasan: CONFIG_KASAN_INLINE enabled [ 59.617234][ T2788] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 59.618398][ T2788] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 59.619389][ T2788] CPU: 3 PID: 2788 Comm: tipc Not tainted 5.4.0+ #194 [ 59.620231][ T2788] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 59.621428][ T2788] RIP: 0010:tipc_bcast_get_broadcast_mode+0x131/0x310 [tipc] [ 59.622379][ T2788] Code: c7 c6 ef 8b 38 c0 65 ff 0d 84 83 c9 3f e8 d7 a5 f2 e3 48 8d bb 38 11 00 00 48 b8 00 00 00 00 [ 59.622550][ T2780] NET: Registered protocol family 30 [ 59.624627][ T2788] RSP: 0018:ffff88804b09f578 EFLAGS: 00010202 [ 59.624630][ T2788] RAX: dffffc0000000000 RBX: 0000000000000011 RCX: 000000008bc66907 [ 59.624631][ T2788] RDX: 0000000000000229 RSI: 000000004b3cf4cc RDI: 0000000000001149 [ 59.624633][ T2788] RBP: ffff88804b09f588 R08: 0000000000000003 R09: fffffbfff4fb3df1 [ 59.624635][ T2788] R10: fffffbfff50318f8 R11: ffff888066cadc18 R12: ffffffffa6cc2f40 [ 59.624637][ T2788] R13: 1ffff11009613eba R14: ffff8880662e9328 R15: ffff8880662e9328 [ 59.624639][ T2788] FS: 00007f57d8f7b740(0000) GS:ffff88806cc00000(0000) knlGS:0000000000000000 [ 59.624645][ T2788] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 59.625875][ T2780] tipc: Started in single node mode [ 59.626128][ T2788] CR2: 00007f57d887a8c0 CR3: 000000004b140002 CR4: 00000000000606e0 [ 59.633991][ T2788] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 59.635195][ T2788] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 59.636478][ T2788] Call Trace: [ 59.637025][ T2788] tipc_nl_add_bc_link+0x179/0x1470 [tipc] [ 59.638219][ T2788] ? lock_downgrade+0x6e0/0x6e0 [ 59.638923][ T2788] ? __tipc_nl_add_link+0xf90/0xf90 [tipc] [ 59.639533][ T2788] ? tipc_nl_node_dump_link+0x318/0xa50 [tipc] [ 59.640160][ T2788] ? mutex_lock_io_nested+0x1380/0x1380 [ 59.640746][ T2788] tipc_nl_node_dump_link+0x4fd/0xa50 [tipc] [ 59.641356][ T2788] ? tipc_nl_node_reset_link_stats+0x340/0x340 [tipc] [ 59.642088][ T2788] ? __skb_ext_del+0x270/0x270 [ 59.642594][ T2788] genl_lock_dumpit+0x85/0xb0 [ 59.643050][ T2788] netlink_dump+0x49c/0xed0 [ 59.643529][ T2788] ? __netlink_sendskb+0xc0/0xc0 [ 59.644044][ T2788] ? __netlink_dump_start+0x190/0x800 [ 59.644617][ T2788] ? __mutex_unlock_slowpath+0xd0/0x670 [ 59.645177][ T2788] __netlink_dump_start+0x5a0/0x800 [ 59.645692][ T2788] genl_rcv_msg+0xa75/0xe90 [ 59.646144][ T2788] ? __lock_acquire+0xdfe/0x3de0 [ 59.646692][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.647340][ T2788] ? genl_lock_dumpit+0xb0/0xb0 [ 59.647821][ T2788] ? genl_unlock+0x20/0x20 [ 59.648290][ T2788] ? genl_parallel_done+0xe0/0xe0 [ 59.648787][ T2788] ? find_held_lock+0x39/0x1d0 [ 59.649276][ T2788] ? genl_rcv+0x15/0x40 [ 59.649722][ T2788] ? lock_contended+0xcd0/0xcd0 [ 59.650296][ T2788] netlink_rcv_skb+0x121/0x350 [ 59.650828][ T2788] ? genl_family_rcv_msg_attrs_parse+0x320/0x320 [ 59.651491][ T2788] ? netlink_ack+0x940/0x940 [ 59.651953][ T2788] ? lock_acquire+0x164/0x3b0 [ 59.652449][ T2788] genl_rcv+0x24/0x40 [ 59.652841][ T2788] netlink_unicast+0x421/0x600 [ ... ] Fixes: 7e4369057806 ("tipc: fix a slab object leak") Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06mqprio: Fix out-of-bounds access in mqprio_dumpVladyslav Tarasiuk1-1/+1
When user runs a command like tc qdisc add dev eth1 root mqprio KASAN stack-out-of-bounds warning is emitted. Currently, NLA_ALIGN macro used in mqprio_dump provides too large buffer size as argument for nla_put and memcpy down the call stack. The flow looks like this: 1. nla_put expects exact object size as an argument; 2. Later it provides this size to memcpy; 3. To calculate correct padding for SKB, nla_put applies NLA_ALIGN macro itself. Therefore, NLA_ALIGN should not be applied to the nla_put parameter. Otherwise it will lead to out-of-bounds memory access in memcpy. Fixes: 4e8b86c06269 ("mqprio: Introduce new hardware offload mode and shaper in mqprio") Signed-off-by: Vladyslav Tarasiuk <vladyslavt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06net: stmmac: reset Tx desc base address before restarting TxJongsung Kim1-0/+2
Refer to the databook of DesignWare Cores Ethernet MAC Universal: 6.2.1.5 Register 4 (Transmit Descriptor List Address Register If this register is not changed when the ST bit is set to 0, then the DMA takes the descriptor address where it was stopped earlier. The stmmac_tx_err() does zero indices to Tx descriptors, but does not reset HW current Tx descriptor address. To fix inconsistency, the base address of the Tx descriptors should be rewritten before restarting Tx. Signed-off-by: Jongsung Kim <neidhard.kim@lge.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-06enetc: disable EEE autoneg by defaultYangbo Lu1-0/+5
The EEE support has not been enabled on ENETC, but it may connect to a PHY which supports EEE and advertises EEE by default, while its link partner also advertises EEE. If this happens, the PHY enters low power mode when the traffic rate is low and causes packet loss. This patch disables EEE advertisement by default for any PHY that ENETC connects to, to prevent the above unwanted outcome. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05ppp: fix out-of-bounds access in bpf_prog_create()Eric Biggers1-2/+3
sock_fprog_kern::len is in units of struct sock_filter, not bytes. Fixes: 3e859adf3643 ("compat_ioctl: unify copy-in of ppp filters") Reported-by: syzbot+eb853b51b10f1befa0b7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix VF ID issue for setting VF VLANJian Shen1-12/+6
Previously, when set VF VLAN with command "ip link set <pf name> vf <vf id> vlan <vlan id>", the VF ID 0 is handled as PF incorrectly, which should be the first VF. This patch fixes it. Fixes: 21e043cd8124 ("net: hns3: fix set port based VLAN for PF") Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix a use after free problem in hns3_nic_maybe_stop_tx()Yunsheng Lin1-13/+6
Currently, hns3_nic_maybe_stop_tx() uses skb_copy() to linearize a SKB if the BD num required by the SKB does not meet the hardware limitation, and it linearizes the SKB by allocating a new linearized SKB and freeing the old SKB, if hns3_nic_maybe_stop_tx() returns -EBUSY because there are no enough space in the ring to send the linearized skb to hardware, the sch_direct_xmit() still hold reference to old SKB and try to retransmit the old SKB when dev_hard_start_xmit() return TX_BUSY, which may cause use after freed problem. This patch fixes it by using __skb_linearize() to linearize the SKB in hns3_nic_maybe_stop_tx(). Fixes: 51e8439f3496 ("net: hns3: add 8 BD limit for tx flow") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: hns3: fix for TX queue not restarted problemYunsheng Lin1-12/+21
There is timing window between ring_space checking and netif_stop_subqueue when transmiting a SKB, and the TX BD cleaning may be executed during the time window, which may caused TX queue not restarted problem. This patch fixes it by rechecking the ring_space after netif_stop_subqueue to make sure TX queue is restarted. Also, the ring->next_to_clean is updated even when pkts is zero, because all the TX BD cleaned may be non-SKB, so it needs to check if TX queue need to be restarted. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: ethernet: ti: cpsw_switchdev: fix unmet direct dependencies detected for NET_SWITCHDEVGrygorii Strashko1-1/+1
Replace "select NET_SWITCHDEV" vs "depends on NET_SWITCHDEV" to fix Kconfig warning with CONFIG_COMPILE_TEST=y WARNING: unmet direct dependencies detected for NET_SWITCHDEV Depends on [n]: NET [=y] && INET [=n] Selected by [y]: - TI_CPSW_SWITCHDEV [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_TI [=y] && (ARCH_DAVINCI || ARCH_OMAP2PLUS || COMPILE_TEST [=y]) because TI_CPSW_SWITCHDEV blindly selects NET_SWITCHDEV even though INET is not set/enabled, while NET_SWITCHDEV depends on INET. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05s390/qeth: fix dangling IO buffers after halt/clearJulian Wiedmann5-46/+67
The cio layer's intparm logic does not align itself well with how qeth manages cmd IOs. When an active IO gets terminated via halt/clear, the corresponding IRQ's intparm does not reflect the cmd buffer but rather the intparm that was passed to ccw_device_halt() / ccw_device_clear(). This behaviour was recently clarified in commit b91d9e67e50b ("s390/cio: fix intparm documentation"). As a result, qeth_irq() currently doesn't cancel a cmd that was terminated via halt/clear. This primarily causes us to leak card->read_cmd after the qeth device is removed, since our IO path still holds a refcount for this cmd. For qeth this means that we need to keep track of which IO is pending on a device ('active_cmd'), and use this as the intparm when calling halt/clear. Otherwise qeth_irq() can't match the subsequent IRQ to its cmd buffer. Since we now keep track of the _expected_ intparm, we can also detect any mismatch; this would constitute a bug somewhere in the lower layers. In this case cancel the active cmd - we effectively "lost" the IRQ and should not expect any further notification for this IO. Fixes: 405548959cc7 ("s390/qeth: add support for dynamically allocated cmds") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05s390/qeth: ensure linear access to packet headersJulian Wiedmann1-33/+31
When the RX path builds non-linear skbs, the packet headers can currently spill over into page fragments. Depending on the packet type and what fields we need to access in the headers, this could cause us to go past the end of skb->data. So for non-linear packets, copy precisely the length of the necessary headers ('linear_len') into skb->data. And don't copy more, upper-level protocols will peel whatever additional packet headers they need. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05s390/qeth: guard against runt packetsJulian Wiedmann3-6/+23
Depending on a packet's type, the RX path needs to access fields in the packet headers and thus requires a minimum packet length. Enforce this length when building the skb. On the other hand a single runt packet is no reason to drop the whole RX buffer. So just skip it, and continue processing on the next packet. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05net: thunderx: start phy before starting autonegotiationMian Yousaf Kaukab1-1/+1
Since commit 2b3e88ea6528 ("net: phy: improve phy state checking") phy_start_aneg() expects phy state to be >= PHY_UP. Call phy_start() before calling phy_start_aneg() during probe so that autonegotiation is initiated. As phy_start() takes care of calling phy_start_aneg(), drop the explicit call to phy_start_aneg(). Network fails without this patch on Octeon TX. Fixes: 2b3e88ea6528 ("net: phy: improve phy state checking") Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-05hsr: fix a NULL pointer dereference in hsr_dev_xmit()Taehee Yoo1-2/+7
hsr_dev_xmit() calls hsr_port_get_hsr() to find master node and that would return NULL if master node is not existing in the list. But hsr_dev_xmit() doesn't check return pointer so a NULL dereference could occur. Test commands: ip netns add nst ip link add veth0 type veth peer name veth1 ip link add veth2 type veth peer name veth3 ip link set veth1 netns nst ip link set veth3 netns nst ip link set veth0 up ip link set veth2 up ip link add hsr0 type hsr slave1 veth0 slave2 veth2 ip a a 192.168.100.1/24 dev hsr0 ip link set hsr0 up ip netns exec nst ip link set veth1 up ip netns exec nst ip link set veth3 up ip netns exec nst ip link add hsr1 type hsr slave1 veth1 slave2 veth3 ip netns exec nst ip a a 192.168.100.2/24 dev hsr1 ip netns exec nst ip link set hsr1 up hping3 192.168.100.2 -2 --flood & modprobe -rv hsr Splat looks like: [ 217.351122][ T1635] kasan: CONFIG_KASAN_INLINE enabled [ 217.352969][ T1635] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 217.354297][ T1635] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 217.355507][ T1635] CPU: 1 PID: 1635 Comm: hping3 Not tainted 5.4.0+ #192 [ 217.356472][ T1635] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 217.357804][ T1635] RIP: 0010:hsr_dev_xmit+0x34/0x90 [hsr] [ 217.373010][ T1635] Code: 48 8d be 00 0c 00 00 be 04 00 00 00 48 83 ec 08 e8 21 be ff ff 48 8d 78 10 48 ba 00 b [ 217.376919][ T1635] RSP: 0018:ffff8880cd8af058 EFLAGS: 00010202 [ 217.377571][ T1635] RAX: 0000000000000000 RBX: ffff8880acde6840 RCX: 0000000000000002 [ 217.379465][ T1635] RDX: dffffc0000000000 RSI: 0000000000000004 RDI: 0000000000000010 [ 217.380274][ T1635] RBP: ffff8880acde6840 R08: ffffed101b440d5d R09: 0000000000000001 [ 217.381078][ T1635] R10: 0000000000000001 R11: ffffed101b440d5c R12: ffff8880bffcc000 [ 217.382023][ T1635] R13: ffff8880bffcc088 R14: 0000000000000000 R15: ffff8880ca675c00 [ 217.383094][ T1635] FS: 00007f060d9d1740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 217.384289][ T1635] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 217.385009][ T1635] CR2: 00007faf15381dd0 CR3: 00000000d523c001 CR4: 00000000000606e0 [ 217.385940][ T1635] Call Trace: [ 217.386544][ T1635] dev_hard_start_xmit+0x160/0x740 [ 217.387114][ T1635] __dev_queue_xmit+0x1961/0x2e10 [ 217.388118][ T1635] ? check_object+0xaf/0x260 [ 217.391466][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.392017][ T1635] ? init_object+0x6b/0x80 [ 217.392629][ T1635] ? netdev_core_pick_tx+0x2e0/0x2e0 [ 217.393175][ T1635] ? __alloc_skb+0xb9/0x500 [ 217.393727][ T1635] ? rcu_read_lock_sched_held+0x90/0xc0 [ 217.394331][ T1635] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 217.395013][ T1635] ? kasan_unpoison_shadow+0x30/0x40 [ 217.395668][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.396280][ T1635] ? __kmalloc_node_track_caller+0x3a8/0x3f0 [ 217.399007][ T1635] ? __kasan_kmalloc.constprop.4+0xa0/0xd0 [ 217.400093][ T1635] ? __kmalloc_reserve.isra.46+0x2e/0xb0 [ 217.401118][ T1635] ? memset+0x1f/0x40 [ 217.402529][ T1635] ? __alloc_skb+0x317/0x500 [ 217.404915][ T1635] ? arp_xmit+0xca/0x2c0 [ ... ] Fixes: 311633b60406 ("hsr: switch ->dellink() to ->ndo_uninit()") Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04selftests/bpf: Add a fexit/bpf2bpf test with target bpf prog no calleesYonghong Song3-19/+81
The existing fexit_bpf2bpf test covers the target progrm with callees. This patch added a test for the target program without callees. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205010607.177904-1-yhs@fb.com
2019-12-04bpf: Fix a bug when getting subprog 0 jited image in check_attach_btf_idYonghong Song1-1/+4
For jited bpf program, if the subprogram count is 1, i.e., there is no callees in the program, prog->aux->func will be NULL and prog->bpf_func points to image address of the program. If there is more than one subprogram, prog->aux->func is populated, and subprogram 0 can be accessed through either prog->bpf_func or prog->aux->func[0]. Other subprograms should be accessed through prog->aux->func[subprog_id]. This patch fixed a bug in check_attach_btf_id(), where prog->aux->func[subprog_id] is used to access any subprogram which caused a segfault like below: [79162.619208] BUG: kernel NULL pointer dereference, address: 0000000000000000 ...... [79162.634255] Call Trace: [79162.634974] ? _cond_resched+0x15/0x30 [79162.635686] ? kmem_cache_alloc_trace+0x162/0x220 [79162.636398] ? selinux_bpf_prog_alloc+0x1f/0x60 [79162.637111] bpf_prog_load+0x3de/0x690 [79162.637809] __do_sys_bpf+0x105/0x1740 [79162.638488] do_syscall_64+0x5b/0x180 [79162.639147] entry_SYSCALL_64_after_hwframe+0x44/0xa9 ...... Fixes: 5b92a28aae4d ("bpf: Support attaching tracing BPF program to other BPF programs") Reported-by: Eelco Chaudron <echaudro@redhat.com> Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191205010606.177774-1-yhs@fb.com
2019-12-04selftests/bpf: De-flake test_tcpbpfStanislav Fomichev3-7/+20
It looks like BPF program that handles BPF_SOCK_OPS_STATE_CB state can race with the bpf_map_lookup_elem("global_map"); I sometimes see the failures in this test and re-running helps. Since we know that we expect the callback to be called 3 times (one time for listener socket, two times for both ends of the connection), let's export this number and add simple retry logic around that. Also, let's make EXPECT_EQ() not return on failure, but continue evaluating all conditions; that should make potential debugging easier. With this fix in place I don't observe the flakiness anymore. Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Lawrence Brakmo <brakmo@fb.com> Link: https://lore.kernel.org/bpf/20191204190955.170934-1-sdf@google.com
2019-12-04selftests/bpf: Bring back c++ include/link testStanislav Fomichev5-6/+7
Commit 5c26f9a78358 ("libbpf: Don't use cxx to test_libpf target") converted existing c++ test to c. We still want to include and link against libbpf from c++ code, so reinstate this test back, this time in a form of a selftest with a clear comment about its purpose. v2: * -lelf -> $(LDLIBS) (Andrii Nakryiko) Fixes: 5c26f9a78358 ("libbpf: Don't use cxx to test_libpf target") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/20191202215931.248178-1-sdf@google.com
2019-12-04selftests/bpf: Don't hard-code root cgroup idStanislav Fomichev1-1/+1
Commit 40430452fd5d ("kernfs: use 64bit inos if ino_t is 64bit") changed the way cgroup ids are exposed to the userspace. Instead of assuming fixed root id, let's query it. Fixes: 40430452fd5d ("kernfs: use 64bit inos if ino_t is 64bit") Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20191202200143.250793-1-sdf@google.com
2019-12-04samples/bpf: Fix broken xdp_rxq_info due to map order assumptionsJesper Dangaard Brouer1-3/+3
In the days of using bpf_load.c the order in which the 'maps' sections were defines in BPF side (*_kern.c) file, were used by userspace side to identify the map via using the map order as an index. In effect the order-index is created based on the order the maps sections are stored in the ELF-object file, by the LLVM compiler. This have also carried over in libbpf via API bpf_map__next(NULL, obj) to extract maps in the order libbpf parsed the ELF-object file. When BTF based maps were introduced a new section type ".maps" were created. I found that the LLVM compiler doesn't create the ".maps" sections in the order they are defined in the C-file. The order in the ELF file is based on the order the map pointer is referenced in the code. This combination of changes lead to xdp_rxq_info mixing up the map file-descriptors in userspace, resulting in very broken behaviour, but without warning the user. This patch fix issue by instead using bpf_object__find_map_by_name() to find maps via their names. (Note, this is the ELF name, which can be longer than the name the kernel retains). Fixes: be5bca44aa6b ("samples: bpf: convert some XDP samples from bpf_load to libbpf") Fixes: 451d1dc886b5 ("samples: bpf: update map definition to new syntax BTF-defined map") Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Andrii Nakryiko <andriin@fb.com> Link: https://lore.kernel.org/bpf/157529025128.29832.5953245340679936909.stgit@firesoul
2019-12-04net: Fixed updating of ethertype in skb_mpls_push()Martin Varghese4-5/+7
The skb_mpls_push was not updating ethertype of an ethernet packet if the packet was originally received from a non ARPHRD_ETHER device. In the below OVS data path flow, since the device corresponding to port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does not update the ethertype of the packet even though the previous push_eth action had added an ethernet header to the packet. recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no), actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00), push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4 Fixes: 8822e270d697 ("net: core: move push MPLS functionality from OvS to core helper") Signed-off-by: Martin Varghese <martin.varghese@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04NFC: NCI: use new `delay` structure for SPI transfer delaysAlexandru Ardelean1-2/+4
In a recent change to the SPI subsystem [1], a new `delay` struct was added to replace the `delay_usecs`. This change replaces the current `delay_secs` with `delay` for this driver. The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure that both `delay_usecs` & `delay` are used (in this order to preserve backwards compatibility). [1] commit bebcfd272df6485 ("spi: introduce `delay` field for `spi_transfer` + spi_transfer_delay_exec()") Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix hwmonRussell King1-9/+4
The referenced commit below allowed more than one hwmon device to be created per SFP, which is definitely not what we want. Avoid this by only creating the hwmon device just as we transition to WAITDEV state. Fixes: 139d3a212a1f ("net: sfp: allow modules with slow diagnostics to probe") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: sfp: fix unbindRussell King1-0/+4
When unbinding, we don't correctly tear down the module state, leaving (for example) the hwmon registration behind. Ensure everything is properly removed by sending a remove event at unbind. Fixes: 6b0da5c9c1a3 ("net: sfp: track upstream's attachment state in state machine") Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04ionic: keep users rss hash across lif resetShannon Nelson1-6/+10
If the user has specified their own RSS hash key, don't lose it across queue resets such as DOWN/UP, MTU change, and number of channels change. This is fixed by moving the key initialization to a little earlier in the lif creation. Also, let's clean up the RSS config a little better on the way down by setting it all to 0. Fixes: aa3198819bea ("ionic: Add RSS support") Signed-off-by: Shannon Nelson <snelson@pensando.io> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04xdp: obtain the mem_id mutex before trying to remove an entry.Jonathan Lemon1-4/+4
A lockdep splat was observed when trying to remove an xdp memory model from the table since the mutex was obtained when trying to remove the entry, but not before the table walk started: Fix the splat by obtaining the lock before starting the table walk. Fixes: c3f812cea0d7 ("page_pool: do not release pool until inflight == 0.") Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04act_ct: support asymmetric conntrackAaron Conole1-1/+12
The act_ct TC module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The act_ct action doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: Aaron Conole <aconole@redhat.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04openvswitch: support asymmetric conntrackAaron Conole1-0/+11
The openvswitch module shares a common conntrack and NAT infrastructure exposed via netfilter. It's possible that a packet needs both SNAT and DNAT manipulation, due to e.g. tuple collision. Netfilter can support this because it runs through the NAT table twice - once on ingress and again after egress. The openvswitch module doesn't have such capability. Like netfilter hook infrastructure, we should run through NAT twice to keep the symmetry. Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Aaron Conole <aconole@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6_stub: use ip6_dst_lookup_flow instead of ip6_dst_lookupSabrina Dubroca11-35/+39
ipv6_stub uses the ip6_dst_lookup function to allow other modules to perform IPv6 lookups. However, this function skips the XFRM layer entirely. All users of ipv6_stub->ip6_dst_lookup use ip_route_output_flow (via the ip_route_output_key and ip_route_output helpers) for their IPv4 lookups, which calls xfrm_lookup_route(). This patch fixes this inconsistent behavior by switching the stub to ip6_dst_lookup_flow, which also calls xfrm_lookup_route(). This requires some changes in all the callers, as these two functions take different arguments and have different return types. Fixes: 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-04net: ipv6: add net argument to ip6_dst_lookup_flowSabrina Dubroca11-19/+19
This will be used in the conversion of ipv6_stub to ip6_dst_lookup_flow, as some modules currently pass a net argument without a socket to ip6_dst_lookup. This is equivalent to commit 343d60aada5a ("ipv6: change ipv6_stub_impl.ipv6_dst_lookup to take net argument"). Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03cls_flower: Fix the behavior using port ranges with hw-offloadYoshiki Komachi3-61/+95
The recent commit 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges") had added filtering based on port ranges to tc flower. However the commit missed necessary changes in hw-offload code, so the feature gave rise to generating incorrect offloaded flow keys in NIC. One more detailed example is below: $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 100-200 action drop With the setup above, an exact match filter with dst_port == 0 will be installed in NIC by hw-offload. IOW, the NIC will have a rule which is equivalent to the following one. $ tc qdisc add dev eth0 ingress $ tc filter add dev eth0 ingress protocol ip flower ip_proto tcp \ dst_port 0 action drop The behavior was caused by the flow dissector which extracts packet data into the flow key in the tc flower. More specifically, regardless of exact match or specified port ranges, fl_init_dissector() set the FLOW_DISSECTOR_KEY_PORTS flag in struct flow_dissector to extract port numbers from skb in skb_flow_dissect() called by fl_classify(). Note that device drivers received the same struct flow_dissector object as used in skb_flow_dissect(). Thus, offloaded drivers could not identify which of these is used because the FLOW_DISSECTOR_KEY_PORTS flag was set to struct flow_dissector in either case. This patch adds the new FLOW_DISSECTOR_KEY_PORTS_RANGE flag and the new tp_range field in struct fl_flow_key to recognize which filters are applied to offloaded drivers. At this point, when filters based on port ranges passed to drivers, drivers return the EOPNOTSUPP error because they do not support the feature (the newly created FLOW_DISSECTOR_KEY_PORTS_RANGE flag). Fixes: 5c72299fba9d ("net: sched: cls_flower: Classify packets using port ranges") Signed-off-by: Yoshiki Komachi <komachi.yoshiki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: sched: fix dump qlen for sch_mq/sch_mqprio with NOLOCK subqueuesDust Li2-0/+2
sch->q.len hasn't been set if the subqueue is a NOLOCK qdisc in mq_dump() and mqprio_dump(). Fixes: ce679e8df7ed ("net: sched: add support for TCQ_F_NOLOCK subqueues to sch_mqprio") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Signed-off-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03tcp: refactor tcp_retransmit_timer()Eric Dumazet1-2/+8
It appears linux-4.14 stable needs a backport of commit 88f8598d0a30 ("tcp: exit if nothing to retransmit on RTO timeout") Since tcp_rtx_queue_empty() is not in pre 4.15 kernels, let's refactor tcp_retransmit_timer() to only use tcp_rtx_queue_head() I will provide to stable teams the squashed patches. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: mscc: ocelot: unregister the PTP clock on deinitVladimir Oltean1-4/+10
Currently a switch driver deinit frees the regmaps, but the PTP clock is still out there, available to user space via /dev/ptpN. Any PTP operation is a ticking time bomb, since it will attempt to use the freed regmaps and thus trigger kernel panics: [ 4.291746] fsl_enetc 0000:00:00.2 eth1: error -22 setting up slave phy [ 4.291871] mscc_felix 0000:00:00.5: Failed to register DSA switch: -22 [ 4.308666] mscc_felix: probe of 0000:00:00.5 failed with error -22 [ 6.358270] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000088 [ 6.367090] Mem abort info: [ 6.369888] ESR = 0x96000046 [ 6.369891] EC = 0x25: DABT (current EL), IL = 32 bits [ 6.369892] SET = 0, FnV = 0 [ 6.369894] EA = 0, S1PTW = 0 [ 6.369895] Data abort info: [ 6.369897] ISV = 0, ISS = 0x00000046 [ 6.369899] CM = 0, WnR = 1 [ 6.369902] user pgtable: 4k pages, 48-bit VAs, pgdp=00000020d58c7000 [ 6.369904] [0000000000000088] pgd=00000020d5912003, pud=00000020d5915003, pmd=0000000000000000 [ 6.369914] Internal error: Oops: 96000046 [#1] PREEMPT SMP [ 6.420443] Modules linked in: [ 6.423506] CPU: 1 PID: 262 Comm: phc_ctl Not tainted 5.4.0-03625-gb7b2a5dadd7f #204 [ 6.431273] Hardware name: LS1028A RDB Board (DT) [ 6.435989] pstate: 40000085 (nZcv daIf -PAN -UAO) [ 6.440802] pc : css_release+0x24/0x58 [ 6.444561] lr : regmap_read+0x40/0x78 [ 6.448316] sp : ffff800010513cc0 [ 6.451636] x29: ffff800010513cc0 x28: ffff002055873040 [ 6.456963] x27: 0000000000000000 x26: 0000000000000000 [ 6.462289] x25: 0000000000000000 x24: 0000000000000000 [ 6.467617] x23: 0000000000000000 x22: 0000000000000080 [ 6.472944] x21: ffff800010513d44 x20: 0000000000000080 [ 6.478270] x19: 0000000000000000 x18: 0000000000000000 [ 6.483596] x17: 0000000000000000 x16: 0000000000000000 [ 6.488921] x15: 0000000000000000 x14: 0000000000000000 [ 6.494247] x13: 0000000000000000 x12: 0000000000000000 [ 6.499573] x11: 0000000000000000 x10: 0000000000000000 [ 6.504899] x9 : 0000000000000000 x8 : 0000000000000000 [ 6.510225] x7 : 0000000000000000 x6 : ffff800010513cf0 [ 6.515550] x5 : 0000000000000000 x4 : 0000000fffffffe0 [ 6.520876] x3 : 0000000000000088 x2 : ffff800010513d44 [ 6.526202] x1 : ffffcada668ea000 x0 : ffffcada64d8b0c0 [ 6.531528] Call trace: [ 6.533977] css_release+0x24/0x58 [ 6.537385] regmap_read+0x40/0x78 [ 6.540795] __ocelot_read_ix+0x6c/0xa0 [ 6.544641] ocelot_ptp_gettime64+0x4c/0x110 [ 6.548921] ptp_clock_gettime+0x4c/0x58 [ 6.552853] pc_clock_gettime+0x5c/0xa8 [ 6.556699] __arm64_sys_clock_gettime+0x68/0xc8 [ 6.561331] el0_svc_common.constprop.2+0x7c/0x178 [ 6.566133] el0_svc_handler+0x34/0xa0 [ 6.569891] el0_sync_handler+0x114/0x1d0 [ 6.573908] el0_sync+0x140/0x180 [ 6.577232] Code: d503201f b00119a1 91022263 b27b7be4 (f9004663) [ 6.583349] ---[ end trace d196b9b14cdae2da ]--- [ 6.587977] Kernel panic - not syncing: Fatal exception [ 6.593216] SMP: stopping secondary CPUs [ 6.597151] Kernel Offset: 0x4ada54400000 from 0xffff800010000000 [ 6.603261] PHYS_OFFSET: 0xffffd0a7c0000000 [ 6.607454] CPU features: 0x10002,21806008 [ 6.611558] Memory Limit: none And now that ocelot->ptp_clock is checked at exit, prevent a potential error where ptp_clock_register returned a pointer-encoded error, which we are keeping in the ocelot private data structure. So now, ocelot->ptp_clock is now either NULL or a valid pointer. Fixes: 4e3b0468e6d7 ("net: mscc: PTP Hardware Clock (PHC) support") Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net/core: Populate VF index in struct ifla_vf_guidDanit Goldberg1-1/+3
In addition to filling the node_guid and port_guid attributes, there is a need to populate VF index too, otherwise users of netlink interface will see same VF index for all VFs. Fixes: 30aad41721e0 ("net/core: Add support for getting VF GUIDs") Signed-off-by: Danit Goldberg <danitg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: bridge: deny dev_set_mac_address() when unregisteringNikolay Aleksandrov1-0/+6
We have an interesting memory leak in the bridge when it is being unregistered and is a slave to a master device which would change the mac of its slaves on unregister (e.g. bond, team). This is a very unusual setup but we do end up leaking 1 fdb entry because dev_set_mac_address() would cause the bridge to insert the new mac address into its table after all fdbs are flushed, i.e. after dellink() on the bridge has finished and we call NETDEV_UNREGISTER the bond/team would release it and will call dev_set_mac_address() to restore its original address and that in turn will add an fdb in the bridge. One fix is to check for the bridge dev's reg_state in its ndo_set_mac_address callback and return an error if the bridge is not in NETREG_REGISTERED. Easy steps to reproduce: 1. add bond in mode != A/B 2. add any slave to the bond 3. add bridge dev as a slave to the bond 4. destroy the bridge device Trace: unreferenced object 0xffff888035c4d080 (size 128): comm "ip", pid 4068, jiffies 4296209429 (age 1413.753s) hex dump (first 32 bytes): 41 1d c9 36 80 88 ff ff 00 00 00 00 00 00 00 00 A..6............ d2 19 c9 5e 3f d7 00 00 00 00 00 00 00 00 00 00 ...^?........... backtrace: [<00000000ddb525dc>] kmem_cache_alloc+0x155/0x26f [<00000000633ff1e0>] fdb_create+0x21/0x486 [bridge] [<0000000092b17e9c>] fdb_insert+0x91/0xdc [bridge] [<00000000f2a0f0ff>] br_fdb_change_mac_address+0xb3/0x175 [bridge] [<000000001de02dbd>] br_stp_change_bridge_id+0xf/0xff [bridge] [<00000000ac0e32b1>] br_set_mac_address+0x76/0x99 [bridge] [<000000006846a77f>] dev_set_mac_address+0x63/0x9b [<00000000d30738fc>] __bond_release_one+0x3f6/0x455 [bonding] [<00000000fc7ec01d>] bond_netdev_event+0x2f2/0x400 [bonding] [<00000000305d7795>] notifier_call_chain+0x38/0x56 [<0000000028885d4a>] call_netdevice_notifiers+0x1e/0x23 [<000000008279477b>] rollback_registered_many+0x353/0x6a4 [<0000000018ef753a>] unregister_netdevice_many+0x17/0x6f [<00000000ba854b7a>] rtnl_delete_link+0x3c/0x43 [<00000000adf8618d>] rtnl_dellink+0x1dc/0x20a [<000000009b6395fd>] rtnetlink_rcv_msg+0x23d/0x268 Fixes: 43598813386f ("bridge: add local MAC address to forwarding table (v2)") Reported-by: syzbot+2add91c08eb181fea1bf@syzkaller.appspotmail.com Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03net: fix a leak in register_netdevice()Dan Carpenter1-3/+3
We have to free "dev->name_node" on this error path. Fixes: ff92741270bf ("net: introduce name_node struct to be used in hashlist") Reported-by: syzbot+6e13e65ffbaa33757bcb@syzkaller.appspotmail.com Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-03can: xilinx_can: Fix usage of skb memorySrinivas Neeli1-12/+13
As per linux can framework, driver not allowed to touch the skb memory after can_put_echo_skb() call. This patch fixes the same. https://www.spinics.net/lists/linux-can/msg02199.html Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: xilinx_can: skip error message on deferred probeVenkatesh Yadav Abbarapu1-1/+2
When the CAN bus clock is provided from the clock wizard, clock wizard driver may not be available when can driver probes resulting to the error message "bus clock not found error". As this error message is not very useful to the end user, skip printing in the case of deferred probe. Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: ucan: fix non-atomic allocation in completion handlerJohan Hovold1-1/+1
USB completion handlers are called in atomic context and must specifically not allocate memory using GFP_KERNEL. Fixes: 9f2d3eae88d2 ("can: ucan: add driver for Theobroma Systems UCAN devices") Cc: stable <stable@vger.kernel.org> # 4.19 Cc: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Cc: Martin Elshuber <martin.elshuber@theobroma-systems.com> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2019-12-03can: slcan: Fix use-after-free Read in slcan_openJouni Hogander1-0/+1
Slcan_open doesn't clean-up device which registration failed from the slcan_devs device list. On next open this list is iterated and freed device is accessed. Fix this by calling slc_free_netdev in error path. Driver/net/can/slcan.c is derived from slip.c. Use-after-free error was identified in slip_open by syzboz. Same bug is in slcan.c. Here is the trace from the Syzbot slip report: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x197/0x210 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xd4/0x30b mm/kasan/report.c:374 __kasan_report.cold+0x1b/0x41 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:634 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:132 sl_sync drivers/net/slip/slip.c:725 [inline] slip_open+0xecd/0x11b7 drivers/net/slip/slip.c:801 tty_ldisc_open.isra.0+0xa3/0x110 drivers/tty/tty_ldisc.c:469 tty_set_ldisc+0x30e/0x6b0 drivers/tty/tty_ldisc.c:596 tiocsetd drivers/tty/tty_io.c:2334 [inline] tty_ioctl+0xe8d/0x14f0 drivers/tty/tty_io.c:2594 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xdb6/0x13e0 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0xfa/0x760 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: ed50e1600b44 ("slcan: Fix memory leak in error path") Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: David Miller <davem@davemloft.net> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com> Cc: linux-stable <stable@vger.kernel.org> # >= v5.4 Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.