aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2013-12-05i40e: restrict diag test lengthKamil Krawczyk1-4/+4
The diagnostics test needs some slightly different limits in order to succeed. Change-Id: Ia1c49148af92fa4be20778a819f69350381bf865 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: add support for triggering EMPRShannon Nelson3-0/+23
Allow debugfs to trigger a reset called EMPR. Change-Id: I2f6600a8242759ec60c8198d03f70c2b774e0740 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: add interrupt testShannon Nelson3-2/+14
Add a quick ethtool test for interrupts using the SW interrupt. Also, change the loopback test (for now) to not report failure. Change-Id: Id8ef154b82475e3163087a8d1df01dfec4d529fc Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: default debug mask settingShannon Nelson1-0/+1
Set the debug mask by default. Change-Id: I10346ccb1a47f79747eb2108a83af059e947f1e2 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: fix debugging messagesMitch Williams1-2/+2
Clean up some messages that had arguments reversed. Change-Id: I0f38a4f01132a2918d61dbaf23de1e1eaed5e56d Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: properly add VF MAC addressesMitch Williams1-1/+1
The code that added new MAC addresses from the VFs did not, in fact, work. Due to inverse logic, the only addresses that could be added were addresses that already had been added. Change-Id: Idce9169bd2f36e2c5ee10b130587a65705465d31 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: retry call on timeoutShannon Nelson1-6/+20
If the admin queue times out, retry some more to make driver load and reset more robust. Change-Id: I45c977b3d10a62c770d6072659ec27834849ca33 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: select reset counters correctlyShannon Nelson1-3/+3
The indication for telling which reset happened is a value, not a bit pattern, so select by ==, not &. Change-Id: Ie04097388ff16b85015d6ab1236d7511ef653e8c Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: allow one more vector for VFsMitch Williams1-1/+1
The number of vectors per VF as reported by the hardware does not include vector 0, so we need to account for this when checking to see if the VF is configuring a valid vector. Change-Id: I051d8bebae8f4722239f5a3fa5e1de4cf0f4e817 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: firmware version fields offsets updateAnjali Singhai jain2-8/+16
The version bits reported by the hardware changed, so fix up the offsets to print the version correctly. Change-Id: I8a8207b401ea88f6da024aebafe7d3826ee6512c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: simplify aq head-tail-len setupsShannon Nelson2-36/+15
Use more virtual registers to simplify code flows. Change-Id: I32cff3818c5ca3a3792487ba4fed8f1d0ea6145a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: clear AQ head and tail registersShannon Nelson1-4/+14
During admin queue shutdown clear some more registers explicitly. Change-Id: Ifb235c691e1c55e76bf66e0642207f464153d05a Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: register file updatesAnjali Singhai jain1-90/+44
Hardware definitions changed slightly so sync up the defines file with the updated state of the hardware. Change-Id: I8349d91630a3208df306bd1dc88f028c87be2248 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05i40e: set pf_id based on device and function numbersChristopher Pau1-1/+5
pf_id needs to be encoded for cards with ARI enabled, which allows for larger function numbers than 8. Commit-Id: I23fa7df9dabf3878cc08c9b2151729c8539f5f17 Signed-off-by: Christopher Pau <christopher.pau@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-12-05macvlan: Support creating macvtaps from macvlansKevin Wallace1-5/+3
When running in a network namespace whose only link to the outside world is a macvlan device, not being able to create a macvtap off of it is a real pain. So modify macvtap creation to automatically forward a creation of a macvtap on a macvlan to become a creation of a macvtap on the underlying network device, just like is currently done with macvlan-on-macvlan devices. v2: Use netif_is_macvlan and macvlan_dev_real_dev helpers to make it more clear what we're doing. Signed-off-by: Kevin Wallace <kevin@pentabarf.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-05ath: fix dynamic user regulatory domain supportLuis R. Rodriguez1-6/+22
As it stands dynamic user regulatory domain support is only possible for a few programmed regulatory domains as a few countries do not allow for this. The existing code however only would take advantage of the feature if a custom world regulatory domain is used though as that's when we clear beconing flags. We need to lift this restriction as otherwise this feature is pointless. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: dynamic user allow check helper to the topLuis R. Rodriguez1-12/+11
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move dynamic_country_user_possible() to the topLuis R. Rodriguez1-72/+72
This will be used later. Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix usage of freq_reg_info()Luis R. Rodriguez1-1/+1
freq_reg_info() expects KHz and not MHz, fix this. In this case we'll now be getting the no-ir flags cleared on channels for any channel when the country IE trusts that channel. @@ struct ieee80211_channel *ch; struct wiphy *wiphy; const struct ieee80211_reg_rule *rule; @@ -rule = freq_reg_info(wiphy, ch->center_freq); +rule = freq_reg_info(wiphy, MHZ_TO_KHZ(ch->center_freq)); Generated-by: Coccinelle SmPL Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Peter Senna Tschudin <peter.senna@gmail.com> Reported-by: Mihir Shete <smihir@qti.qualcomm.com> Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: move the channel for ath_reg_apply_beaconing_flags() into helperLuis R. Rodriguez1-19/+20
While at it convert this into a switch statement, this makes it easier and manage. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: simplify ath_reg_apply_beaconing_flags()Luis R. Rodriguez1-21/+10
Simplify ath_reg_apply_beaconing_flags() by making use of thew new no-ir helper. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: rename ath_reg_apply_active_scan_flags() to ath_reg_apply_ir_flags()Luis R. Rodriguez1-3/+3
This also applies the no-ibss flag to the channels or clears it. The idea here is to clarify no initiated radiation should be allowed on these channels. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: clean up ath_reg_apply_active_scan_flags()Luis R. Rodriguez1-38/+63
The routine ath_reg_apply_active_scan_flags() can be a bit hard to read, this cleans it up by adding helpers for the two cases of clearing IR flags or adding them. This approach also makes no assumptions on the index of channels 12 and 13 so it should be portable accross different drivers. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath: fix logic on ath_reg_apply_active_scan_flags()Luis R. Rodriguez1-6/+6
The existing logic removes the passive scan flag from channels 12 and 13 when a regulatory hint coming from something other than a country IE has been passed. This is incorrect, the original intention was to ensure we always have passive scan enabled for these two channels for a specific set of custom world regulatory domains. Cc: smihir@qti.qualcomm.com Cc: tushnimb@qca.qualcomm.com Signed-off-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: fix typo errorChun-Yeow Yeoh2-3/+3
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8188ee: Fix typo in codeLarry Finger1-1/+1
The static analyser "cppcheck" shows the following typo: drivers/net/wireless/rtlwifi/rtl8188ee/dm.c:1081]: (style) Same expression on both sides of '!='. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Reported-by: David Binderman <dcb314@hotmail.com> Cc: David Binderman <dcb314@hotmail.com> Cc: Stable <stable@vger.kernel.org> [3.10+] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05bcma: pci: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: libertas: remove unnecessary spi_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: rt2x00: remove unnecessary pci_set_drvdata()Jingoo Han1-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: prism54: remove unnecessary pci_set_drvdata()Jingoo Han2-3/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wireless: ipw2100: remove unnecessary pci_set_drvdata()Jingoo Han1-1/+0
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05brcmsmac: remove dependency on CRC8 and CRC_CCITTHauke Mehrtens1-2/+0
There is no code in brcmsmac that uses a function from CRC8 or CRC_CCITT any more. Building brcmsmac with these two disabled works without any problems. This was probably only used by the bus code which was replaced by bcma some time ago. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05ath9k: fix retry chain initialization in tx99 codeLorenzo Bianconi1-0/+1
Initialize first chain attempt counter to 1 in ath9k_build_tx99_skb(). Otherwise multi-retry chain is initialized to {idx,count} = {-1, 0} in rate_control_fill_sta_table() and tx99 transmission rate is not configured in rate_control_apply_mask() since first chain idx is set to -1 Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05wcn36xx: set self STA default HT parametersChun-Yeow Yeoh1-0/+17
These default HT parameters are required for self STA entry. In example, set the HT capable of self STA entry for bss configuration in mesh allows the MCS rate to be used. Otherwise, only legacy rate will be used. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05libertas sdio: claim device before calling sdio_disable_func()Alexey Khoroshilov1-2/+2
There is a failure path in if_sdio_power_on(), where sdio_disable_func() is called without claiming the device. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Update table.cMark Cave-Ayland1-20/+20
The latest vendor driver has some new values. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Bring rtl92cu_phy_bb_config() up to dateMark Cave-Ayland1-1/+5
The latest vendor driver contains some changes not in the kernel version. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Bring _rtl92c_phy_iq_calibrate() in line with the vendor driverMark Cave-Ayland2-12/+29
Bring _rtl92c_phy_iq_calibrate() in line with the vendor driver function _PHY_IQCalibrate(). Also fix incorrect initialisation for rtl8192cu. Signed-of-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Update dynamic gain calculationsLarry Finger1-98/+193
The vendor driver contained a number of improvements in the gain settings for the rtl8192c{e,u} devices. This patch implements them in the kernel driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Add missing code to PWDB statics routineLarry Finger1-0/+14
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Fix some code in RF handlingLarry Finger1-13/+16
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Update the power index registersLarry Finger2-0/+12
This patch uses the newly introduced power index register routines. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Add routines to save/restore power index registersLarry Finger1-0/+36
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Update beacon statistics for USB driverLarry Finger1-0/+2
The USB drivers were not updating the beacon statistics, which led to false beacon loss indications. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Increase the RX queue length for USB driversLarry Finger1-1/+1
The current number of RX buffers queued is 32, which is too small under heavy load. That number is doubled. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Add new definitions in the dm_common headerLarry Finger1-0/+14
Changes in the gain-control mechanism will require some changes in the header. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Set the link stateLarry Finger1-0/+1
The present code fails to set the linked state when an interface is added. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: Redo register save locationsLarry Finger1-16/+16
The initial USB driver did not use some register save locations in the private data storage. To save some memory, a union was used to overlay these variables with USB I/O components. In an update of the gain-control code, these register save locations are now needed for USB drivers. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192cu: Add new firmwareLarry Finger3-3/+24
Vendor driver rtl8188C_8192C_8192D_usb_linux_v3.4.2_3727.20120404 introduced new firmware for these chips. The code try for the new file, and fall back to the original firmware if the new file is not available. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-12-05rtlwifi: rtl8192c: Prevent reconnect attempts if not connectedLarry Finger1-1/+2
This driver has a watchdog timer that attempts to reconnect when beacon frames are not seen for 6 seconds. This patch disables that reconnect whenever the device has never been connected. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.