aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (unfollow)
AgeCommit message (Collapse)AuthorFilesLines
2019-03-19enc28j60: Convert to use SPDX identifierAndy Shevchenko1-5/+1
Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Fix indentation splatsAndy Shevchenko1-37/+21
Fix few indentation splats. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Amend comments by fixing typos, adding periods, etcAndy Shevchenko1-15/+16
Amend comments in the code: - adding periods to the multi-line comments - fixing typos - capitalize first word in the sentences - etc Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Remove linux/init.hAndy Shevchenko1-1/+0
There is no need to include linux/init.h when at the same time we include linux/module.h. Remove redundant inclusion. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Convert printk() to netdev_printk()Andy Shevchenko1-24/+27
The debug prints of network operations will look better if network device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to netdev_print(KERN_DEBUG, ndev). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Convert HW related printk() to dev_printk()Andy Shevchenko1-119/+141
The debug prints of hardware status and operations will look better if SPI device name is printed. The benefit of that is a possibility to distinguish the actual hardware when more than one is installed on the system. Convert appropriate printk(KERN_DEBUG) to dev_print(KERN_DEBUG, &spi->dev). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Switch to dev_<level> from pr_<level>Andy Shevchenko1-12/+17
Instead of using open coded printk(KERN_<LEVEL>) switch the driver to use dev_<level> macros. Note, the device name will be printed in full, which is beneficial when more than one card installed on the system. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Use ether_addr_copy() in enc28j60_set_mac_address()Andy Shevchenko1-1/+1
Use ether_addr_copy() instead of memcpy() to copy the mac address. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Switch to use module_spi_driver() macroAndy Shevchenko1-19/+2
Eliminate some boilerplate code by using module_spi_driver() instead of ->init() / ->exit(), moving the salient bits from ->init() into ->probe(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Drop driver name duplication from messagesAndy Shevchenko1-7/+6
When dev_<level>() macros are used against SPI device, the driver's name is printed as well. No need to duplicate this explicitly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Replace dev_*(&netdev->dev, ...) with netdev_*()Andy Shevchenko1-24/+18
Replace open coded netdev_<level>() macros. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Remove duplicate messagingAndy Shevchenko1-20/+0
The ->probe() and ->remove() stages can be easily debugged with initcall_debug or function tracer. There is no need to repeat the same explicitly in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19enc28j60: Use device_get_mac_address()Andy Shevchenko1-4/+3
Replace the DT-specific of_get_mac_address() function with device_get_mac_address, which works on both DT and ACPI platforms. This change makes it easier to add ACPI support. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net: macb: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net: pasemi: Make pasemi_mac_init_module staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/pasemi/pasemi_mac.c:1842:5: warning: symbol 'pasemi_mac_init_module' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19net: hns3: Make hclgevf_update_link_mode staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c:407:6: warning: symbol 'hclgevf_update_link_mode' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19ibmveth: Make array ibmveth_stats staticYueHaibing1-1/+1
Fix sparse warning: drivers/net/ethernet/ibm/ibmveth.c:96:21: warning: symbol 'ibmveth_stats' was not declared. Should it be static? Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-19ibmvnic: Report actual backing device speed and duplex valuesMurilo Fossa Vicentini2-17/+94
The ibmvnic driver currently reports a fixed value for both speed and duplex settings regardless of the actual backing device that is being used. By adding support to the QUERY_PHYS_PARMS command defined by the PAPR+ we can query the current physical port state and report the proper values for these feilds. Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by: Murilo Fossa Vicentini <muvic@linux.ibm.com> Reviewed-by: Mauro S. M. Rodrigues <maurosr@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18net: aquantia: fix rx checksum offload for UDP/TCP over IPv6Dmitry Bogdanov1-2/+3
TCP/UDP checksum validity was propagated to skb only if IP checksum is valid. But for IPv6 there is no validity as there is no checksum in IPv6. This patch propagates TCP/UDP checksum validity regardless of IP checksum. Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com> Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com> Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-18mac8390: Fix mmio access size probeFinn Thain1-7/+12
The bug that Stan reported is as follows. After a restart, a 16-bit NIC may be incorrectly identified as a 32-bit NIC and stop working. mac8390 slot.E: Memory length resource not found, probing mac8390 slot.E: Farallon EtherMac II-C (type farallon) mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access. The bug never arises after a cold start and only intermittently after a warm start. (I didn't investigate why the bug is intermittent.) It turns out that memcpy_toio() is deprecated and memcmp_withio() also has issues. Replacing these calls with mmio accessors fixes the problem. Reported-and-tested-by: Stan Johnson <userm57@yahoo.com> Fixes: 2964db0f5904 ("m68k: Mac DP8390 update") Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15net: sis900: fix indentation issues, remove some spacesColin Ian King1-5/+5
There are several statements that contain extra spacing in the indentation; clean this up by removing spaces. Also add { } braces on if statement to keep to kernel coding style. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15drivers: net: atp: fix various indentation issuesColin Ian King1-1/+1
There is a statement that is indented incorrectly; replace spaces with a tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15qlcnic: Avoid potential NULL pointer dereferenceAditya Pakki1-0/+2
netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15net: stmmac: fix jumbo frame sending with non-linear skbsAaro Koskinen1-2/+4
When sending non-linear skbs with jumbo frames, we set up the non-paged data and mark that as a last segment, although the paged fragments are also prepared. This will stall the TX queue and trigger a watchdog warning (a simple reproducer is to run an iperf client mode TCP test with a large MTU - networking fails instantly). Fix by checking if the skb is non-linear. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-15net: stmmac: don't set own bit too early for jumbo framesAaro Koskinen2-8/+10
Commit 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit routine") overlooked jumbo frames when re-ordering the code, and as a result the own bit was not getting set anymore for the first jumbo frame descriptor. Commit 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo frames") tried to fix this, but now the bit is getting set too early and the DMA may start while we are still setting up the remaining descriptors. And with the chain mode the own bit remains still unset. Fix by setting the own bit at the end of xmit also with jumbo frames. Fixes: 0e80bdc9a72d ("stmmac: first frame prep at the end of xmit routine") Fixes: 487e2e22ab79 ("net: stmmac: Set OWN bit for jumbo frames") Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Acked-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-13lan743x: Fix TX Stall IssueBryan Whitehead1-8/+1
It has been observed that tx queue may stall while downloading from certain web sites (example www.speedtest.net) The cause has been tracked down to a corner case where the tx interrupt vector was disabled automatically, but was not re enabled later. The lan743x has two mechanisms to enable/disable individual interrupts. Interrupts can be enabled/disabled by individual source, and they can also be enabled/disabled by individual vector which has been mapped to the source. Both must be enabled for interrupts to work properly. The TX code path, primarily uses the interrupt enable/disable of the TX source bit, while leaving the vector enabled all the time. However, while investigating this issue it was noticed that the driver requested the use of the vector auto clear feature. The test above revealed a case where the vector enable was cleared unintentionally. This patch fixes the issue by deleting the lines that request the vector auto clear feature to be used. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net/mlx4_core: Fix qp mtt size calculationJack Morgenstein1-3/+3
Calculation of qp mtt size (in function mlx4_RST2INIT_wrapper) ultimately depends on function roundup_pow_of_two. If the amount of memory required by the QP is less than one page, roundup_pow_of_two is called with argument zero. In this case, the roundup_pow_of_two result is undefined. Calling roundup_pow_of_two with a zero argument resulted in the following stack trace: UBSAN: Undefined behaviour in ./include/linux/log2.h:61:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 4 PID: 26939 Comm: rping Tainted: G OE 4.19.0-rc1 Hardware name: Supermicro X9DR3-F/X9DR3-F, BIOS 3.2a 07/09/2015 Call Trace: dump_stack+0x9a/0xeb ubsan_epilogue+0x9/0x7c __ubsan_handle_shift_out_of_bounds+0x254/0x29d ? __ubsan_handle_load_invalid_value+0x180/0x180 ? debug_show_all_locks+0x310/0x310 ? sched_clock+0x5/0x10 ? sched_clock+0x5/0x10 ? sched_clock_cpu+0x18/0x260 ? find_held_lock+0x35/0x1e0 ? mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] mlx4_RST2INIT_QP_wrapper+0xfb1/0x1440 [mlx4_core] Fix this by explicitly testing for zero, and returning one if the argument is zero (assuming that the next higher power of 2 in this case should be one). Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net/mlx4_core: Fix locking in SRIOV mode when switching between events and pollingJack Morgenstein1-0/+8
In procedures mlx4_cmd_use_events() and mlx4_cmd_use_polling(), we need to guarantee that there are no FW commands in progress on the comm channel (for VFs) or wrapped FW commands (on the PF) when SRIOV is active. We do this by also taking the slave_cmd_mutex when SRIOV is active. This is especially important when switching from event to polling, since we free the command-context array during the switch. If there are FW commands in progress (e.g., waiting for a completion event), the completion event handler will access freed memory. Since the decision to use comm_wait or comm_poll is taken before grabbing the event_sem/poll_sem in mlx4_comm_cmd_wait/poll, we must take the slave_cmd_mutex as well (to guarantee that the decision to use events or polling and the call to the appropriate cmd function are atomic). Fixes: a7e1f04905e5 ("net/mlx4_core: Fix deadlock when switching between polling and event fw commands") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net/mlx4_core: Fix reset flow when in command polling modeJack Morgenstein1-0/+1
As part of unloading a device, the driver switches from FW command event mode to FW command polling mode. Part of switching over to polling mode is freeing the command context array memory (unfortunately, currently, without NULLing the command context array pointer). The reset flow calls "complete" to complete all outstanding fw commands (if we are in event mode). The check for event vs. polling mode here is to test if the command context array pointer is NULL. If the reset flow is activated after the switch to polling mode, it will attempt (incorrectly) to complete all the commands in the context array -- because the pointer was not NULLed when the driver switched over to polling mode. As a result, we have a use-after-free situation, which results in a kernel crash. For example: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 PGD 0 Oops: 0000 [#1] SMP Modules linked in: netconsole nfsv3 nfs_acl nfs lockd grace ... CPU: 2 PID: 940 Comm: kworker/2:3 Kdump: loaded Not tainted 3.10.0-862.el7.x86_64 #1 Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS 090006 04/28/2016 Workqueue: events hv_eject_device_work [pci_hyperv] task: ffff8d1734ca0fd0 ti: ffff8d17354bc000 task.ti: ffff8d17354bc000 RIP: 0010:[<ffffffff876c4a8e>] [<ffffffff876c4a8e>] __wake_up_common+0x2e/0x90 RSP: 0018:ffff8d17354bfa38 EFLAGS: 00010082 RAX: 0000000000000000 RBX: ffff8d17362d42c8 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8d17362d42c8 RBP: ffff8d17354bfa70 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000298 R11: ffff8d173610e000 R12: ffff8d17362d42d0 R13: 0000000000000246 R14: 0000000000000000 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8d1802680000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 00000000f16d8000 CR4: 00000000001406e0 Call Trace: [<ffffffff876c7adc>] complete+0x3c/0x50 [<ffffffffc04242f0>] mlx4_cmd_wake_completions+0x70/0x90 [mlx4_core] [<ffffffffc041e7b1>] mlx4_enter_error_state+0xe1/0x380 [mlx4_core] [<ffffffffc041fa4b>] mlx4_comm_cmd+0x29b/0x360 [mlx4_core] [<ffffffffc041ff51>] __mlx4_cmd+0x441/0x920 [mlx4_core] [<ffffffff877f62b1>] ? __slab_free+0x81/0x2f0 [<ffffffff87951384>] ? __radix_tree_lookup+0x84/0xf0 [<ffffffffc043a8eb>] mlx4_free_mtt_range+0x5b/0xb0 [mlx4_core] [<ffffffffc043a957>] mlx4_mtt_cleanup+0x17/0x20 [mlx4_core] [<ffffffffc04272c7>] mlx4_free_eq+0xa7/0x1c0 [mlx4_core] [<ffffffffc042803e>] mlx4_cleanup_eq_table+0xde/0x130 [mlx4_core] [<ffffffffc0433e08>] mlx4_unload_one+0x118/0x300 [mlx4_core] [<ffffffffc0434191>] mlx4_remove_one+0x91/0x1f0 [mlx4_core] The fix is to set the command context array pointer to NULL after freeing the array. Fixes: f5aef5aa3506 ("net/mlx4_core: Activate reset flow upon fatal command cases") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12mlxsw: minimal: Initialize base_macJiri Pirko1-0/+18
Currently base_mac is not initialized which causes wrong reporting of zeroed parent_id to userspace. Fix this by initializing base_mac properly. Fixes: c100e47caa8e ("mlxsw: minimal: Add ethtool support") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12mlxsw: core: Prevent duplication during QSFP module initializationVadim Pasternak1-10/+11
Verify during thermal initialization if QSFP module's entry is already configured in order to prevent duplication. Such scenario could happen in case two switch drivers (PCI and I2C based) coexist and if after boot, splitting configuration is applied for some ports and then I2C based driver is re-probed. In such case after reboot same QSFP module, associated with split will be discovered by I2C based driver few times, and it will cause a crash. It could happen for example on system equipped with BMC (Baseboard Management Controller), running I2C based driver, when the next steps are performed: - System boot - Host side configures port spilt. - BMC side is rebooted. Fixes: 6a79507cfe94 ("mlxsw: core: Extend thermal module with per QSFP module thermal zones") Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net: dwmac-sun8i: fix a missing check of of_get_phy_modeKangjie Lu1-1/+4
of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns -EINVAL of it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net: sh_eth: fix a missing check of of_get_phy_modeKangjie Lu1-1/+5
of_get_phy_mode may fail and return a negative error code; the fix checks the return value of of_get_phy_mode and returns NULL of it fails. Fixes: b356e978e92f ("sh_eth: add device tree support") Signed-off-by: Kangjie Lu <kjlu@umn.edu> Reviewed-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net: 8390: fix potential NULL pointer dereferencesKangjie Lu1-0/+10
In case ioremap fails, the fix releases resources and returns to avoid NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net: fujitsu: fix a potential NULL pointer dereferenceKangjie Lu1-0/+5
In case ioremap fails, the fix releases the pcmcia window and returns -ENOMEM to avoid the NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-12net: qlogic: fix a potential NULL pointer dereferenceKangjie Lu1-0/+6
In case create_singlethread_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: rocker: fix a potential NULL pointer dereferenceKangjie Lu1-0/+5
In case kzalloc fails, the fix releases resources and returns NOTIFY_BAD to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: qlge: fix a potential NULL pointer dereferenceKangjie Lu1-0/+5
In case alloc_ordered_workqueue fails, the fix returns -ENOMEM to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: thunder: fix a potential NULL pointer dereferenceKangjie Lu1-0/+6
In case alloc_ordered_workqueue fails, the fix reports the error and returns -ENOMEM. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: lio_core: fix two NULL pointer dereferencesKangjie Lu1-0/+10
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereferences. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11lan743x: Fix RX Kernel PanicBryan Whitehead1-14/+32
It has been noticed that running the speed test at www.speedtest.net occasionally causes a kernel panic. Investigation revealed that under this test RX buffer allocation sometimes fails and returns NULL. But the lan743x driver did not handle this case. This patch fixes this issue by attempting to allocate a buffer before sending the new rx packet to the OS. If the allocation fails then the new rx packet is dropped and the existing buffer is reused in the DMA ring. Updates for v2: Additional 2 locations where allocation was not checked, has been changed to reuse existing buffer. Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net: liquidio: fix a NULL pointer dereferenceKangjie Lu1-0/+5
In case octeon_alloc_soft_command fails, the fix reports the error and returns to avoid NULL pointer dereference. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-11net/mlx5: Avoid panic when setting vport rateTonghao Zhang1-4/+9
If we try to set VFs rate on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 max_tx_rate 2 min_tx_rate 1 If not applied the first patch ("net/mlx5: Avoid panic when setting vport mac, getting vport config"), the command: $ ip link set $MLX_VF0 vf 0 rate 100 can also crash the kernel. [ 1650.006388] RIP: 0010:mlx5_eswitch_set_vport_rate+0x1f/0x260 [mlx5_core] [ 1650.007092] do_setlink+0x982/0xd20 [ 1650.007129] __rtnl_newlink+0x528/0x7d0 [ 1650.007374] rtnl_newlink+0x43/0x60 [ 1650.007407] rtnetlink_rcv_msg+0x2a2/0x320 [ 1650.007484] netlink_rcv_skb+0xcb/0x100 [ 1650.007519] netlink_unicast+0x17f/0x230 [ 1650.007554] netlink_sendmsg+0x2d2/0x3d0 [ 1650.007592] sock_sendmsg+0x36/0x50 [ 1650.007625] ___sys_sendmsg+0x280/0x2a0 [ 1650.007963] __sys_sendmsg+0x58/0xa0 [ 1650.007998] do_syscall_64+0x5b/0x180 [ 1650.009438] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c9497c98901c ("net/mlx5: Add support for setting VF min rate") Cc: Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Avoid panic when setting vport mac, getting vport configTonghao Zhang1-2/+2
If we try to set VFs mac address on a VF (not PF) net device, the kernel will be crash. The commands are show as below: $ echo 2 > /sys/class/net/$MLX_PF0/device/sriov_numvfs $ ip link set $MLX_VF0 vf 0 mac 00:11:22:33:44:00 [exception RIP: mlx5_eswitch_set_vport_mac+41] [ffffb8b7079e3688] do_setlink at ffffffff8f67f85b [ffffb8b7079e37a8] __rtnl_newlink at ffffffff8f683778 [ffffb8b7079e3b68] rtnl_newlink at ffffffff8f683a63 [ffffb8b7079e3b90] rtnetlink_rcv_msg at ffffffff8f67d812 [ffffb8b7079e3c10] netlink_rcv_skb at ffffffff8f6b88ab [ffffb8b7079e3c60] netlink_unicast at ffffffff8f6b808f [ffffb8b7079e3ca0] netlink_sendmsg at ffffffff8f6b8412 [ffffb8b7079e3d18] sock_sendmsg at ffffffff8f6452f6 [ffffb8b7079e3d30] ___sys_sendmsg at ffffffff8f645860 [ffffb8b7079e3eb0] __sys_sendmsg at ffffffff8f647a38 [ffffb8b7079e3f38] do_syscall_64 at ffffffff8f00401b [ffffb8b7079e3f50] entry_SYSCALL_64_after_hwframe at ffffffff8f80008c and [exception RIP: mlx5_eswitch_get_vport_config+12] [ffffa70607e57678] mlx5e_get_vf_config at ffffffffc03c7f8f [mlx5_core] [ffffa70607e57688] do_setlink at ffffffffbc67fa59 [ffffa70607e577a8] __rtnl_newlink at ffffffffbc683778 [ffffa70607e57b68] rtnl_newlink at ffffffffbc683a63 [ffffa70607e57b90] rtnetlink_rcv_msg at ffffffffbc67d812 [ffffa70607e57c10] netlink_rcv_skb at ffffffffbc6b88ab [ffffa70607e57c60] netlink_unicast at ffffffffbc6b808f [ffffa70607e57ca0] netlink_sendmsg at ffffffffbc6b8412 [ffffa70607e57d18] sock_sendmsg at ffffffffbc6452f6 [ffffa70607e57d30] ___sys_sendmsg at ffffffffbc645860 [ffffa70607e57eb0] __sys_sendmsg at ffffffffbc647a38 [ffffa70607e57f38] do_syscall_64 at ffffffffbc00401b [ffffa70607e57f50] entry_SYSCALL_64_after_hwframe at ffffffffbc80008c Fixes: a8d70a054a718 ("net/mlx5: E-Switch, Disallow vlan/spoofcheck setup if not being esw manager") Cc: Eli Cohen <eli@mellanox.com> Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Acked-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: Fix access to non-existing receive queueTariq Toukan1-0/+3
In case number of channels is changed while interface is down, RSS indirection table is mistakenly not modified accordingly, causing access to out-of-range non-existing object. Fix by updating the RSS indireciton table also in the early return flow of interface down. Fixes: fb35c534b788 ("net/mlx5e: Fix NULL pointer derefernce in set channels error flow") Fixes: bbeb53b8b2c9 ("net/mlx5e: Move RSS params to a dedicated struct") Reported-by: Or Gerlitz <ogerlitz@mellanox.com> Tested-by: Maria Pasechnik <mariap@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: IPoIB, Fix RX checksum statistics updateFeras Daoud1-3/+8
Update the RX checksum only if the feature is enabled. Fixes: 9d6bd752c63c ("net/mlx5e: IPoIB, RX handler") Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Remove redundant lag function to get pf numRoi Dayan2-23/+0
The function is not being used. Signed-off-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5e: Properly get the PF number phys port name ndoRoi Dayan1-6/+7
Currently, we fail to retrieve the PF number in some cases (e.g single ported cards, lag capability), this further results in a call trace issued by the rtnetlink code, since the error value is not -EOPNOTSUPP. Change the implementation to be independent from the lag code and function properly on both two ports and single ported cards. Call Trace: [ 194.525057] mlx5_core 0000:82:00.0: mlx5_lag_get_pf_num:605:(pid 837): no lag device, can't get pf num [ 194.525804] WARNING: CPU: 7 PID: 837 at net/core/rtnetlink.c:3457 rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.529952] CPU: 7 PID: 837 Comm: kworker/7:3 Tainted: G W O 5.0.0-rc7+ #3 [ 194.531307] Workqueue: events linkwatch_event [ 194.531697] RIP: 0010:rtmsg_ifinfo_build_skb+0x131/0x160 [ 194.545007] Call Trace: [ 194.545406] rtmsg_ifinfo_event.part.29+0x1b/0xb0 [ 194.545810] rtmsg_ifinfo+0x51/0x80 [ 194.546209] netdev_state_change+0xc7/0x110 [ 194.546608] ? dev_valid_name+0x1b0/0x1b0 [ 194.547010] ? __local_bh_enable_ip+0xef/0x1d0 [ 194.547411] ? lockdep_hardirqs_on+0x3ea/0x560 [ 194.547811] ? linkwatch_do_dev+0x9b/0x100 [ 194.548207] linkwatch_do_dev+0x9b/0x100 [ 194.548605] __linkwatch_run_queue+0x244/0x430 [ 194.549014] ? linkwatch_schedule_work+0x100/0x100 [ 194.549412] ? lock_acquire+0x10f/0x2d0 [ 194.549816] linkwatch_event+0x3f/0x50 [ 194.550212] process_one_work+0x7d3/0x1460 Fixes: c12ecc230564 ("net/mlx5e: Move to use common phys port names for vport representors") Signed-off-by: Roi Dayan <roid@mellanox.com> Acked-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Consolidate update FTE for all removal changesEli Britstein1-6/+25
With commit a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") and a use-case of e-switch remote mirroring, the incremental/stepped FTE removal process done by the fs core got us to illegal transient states and FW errors: SET_FLOW_TABLE_ENTRY(0x936) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x9c2e40) To avoid that and improve FTE removal performance, aggregate the FTE's updates that should be applied. Remove the FTE if it is empty, or apply one FW update command with the aggregated updates. Fixes: a18e879d4e45 ("net/mlx5e: Annul encap action ordering requirement") Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2019-03-11net/mlx5: Add a locked flag to node removal functionsEli Britstein1-42/+44
Add a locked flag to the node removal functions to signal if the parent is already locked from the caller function or not as a pre-step towards outside lock. Currently always use false with no functional change. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>