aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2019-10-15net: bcmgenet: Add a shutdown callbackFlorian Fainelli1-0/+6
Make sure that we completely quiesce the network device, including its DMA to avoid having it continue to receive packets while there is no software alive to service those. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: bcmgenet: Generate a random MAC if none is validFlorian Fainelli1-9/+8
Instead of having a hard failure and stopping the driver's probe routine, generate a random Ethernet MAC address to keep going. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Doug Berger <opendmb@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15mlxsw: spectrum: Add support for 400Gbps (50Gbps per lane) link modesJiri Pirko2-10/+43
Extend speed support with 400Gbps Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-15net: b44: remove redundant assignment to variable regColin Ian King1-3/+0
The variable reg is being assigned a value that is never read and is being re-assigned in the following for-loop. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11devlink: propagate extack down to health reporter opsJiri Pirko4-11/+22
During health reporter operations, driver might want to fill-up the extack message, so propagate extack down to the health reporter ops. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-11net: ftgmac100: Ungate RCLK for RMII on ASPEED MACsAndrew Jeffery1-10/+40
The 50MHz RCLK has to be enabled before the RMII interface will function. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-09net: stmmac: Remove break after a returnTiezhu Yang1-2/+0
Since break is not useful after a return, remove it. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09net/ethernet: xgmac don't set .driver twiceBen Dooks1-1/+1
Cleanup the .driver setup to just do it once, to avoid the following sparse warning: drivers/net/ethernet/calxeda/xgmac.c:1914:10: warning: Initializer entry defined twice drivers/net/ethernet/calxeda/xgmac.c:1920:10: also defined here Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09net: stmmac: dwmac-mediatek: fix wrong delay value issue when resume backBiao Huang1-0/+27
mac_delay value will be divided by 550/170 in mt2712_delay_ps2stage(), which is invoked at the beginning of mt2712_set_delay(), and the value should be restored at the end of mt2712_set_delay(). Or, mac_delay will be divided again when invoking mt2712_set_delay() when resume back. So, add mt2712_delay_stage2ps() to mt2712_set_delay() to recovery the original mac_delay value. Signed-off-by: Biao Huang <biao.huang@mediatek.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-09net: stmmac: add flexible PPS to dwmac 4.10aAntonio Borneo1-0/+1
All the registers and the functionalities used in the callback dwmac5_flex_pps_config() are common between dwmac 4.10a [1] and 5.00a [2]. Reuse the same callback for dwmac 4.10a too. Tested on STM32MP15x, based on dwmac 4.10a. [1] DWC Ethernet QoS Databook 4.10a October 2014 [2] DWC Ethernet QoS Databook 5.00a September 2017 Signed-off-by: Antonio Borneo <antonio.borneo@st.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: support tx-scatter-gather-fraglist featureYunsheng Lin2-93/+168
The hardware supports up to 8 TX BD for non-tso skb and up to 63 TX BD for TSO skb. Currently, the hns3 driver supports RX skb with fraglist when HW GRO is enabled, when the stack forwards a RX skb with fraglist, the stack need to linearize the skb before sending to other interface without TX fraglist support. This patch adds support for TX fraglist. The performance increases from 1 GByte to 1.5 GByte for one iperf TCP stream during forwarding test after this patch. BTW, the minimum BD number of ring should be updated to 72 for supporting TX fraglist. This patch also changes the error handling of some function that called by hns3_fill_desc, which returns BD num when there is no error, change some macro to more meaningful name. Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for configuring VF MAC from the hostHuazhong Tan6-8/+158
This patch adds support of configuring VF MAC from the host for the HNS3 driver. BTW, the parameter init in the hns3_init_mac_addr is unnecessary now, since the MAC address will not read from NCL_CONFIG when doing reset, so it should be removed, otherwise it will affect VF's MAC address initialization. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for configuring bandwidth of VF on the hostYonglong Liu8-2/+280
This patch adds support for configuring bandwidth of VF on the host for HNS3 drivers. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for setting VF trustJian Shen9-40/+129
This patch adds supports for setting VF trust by host. If specified VF is trusted, then it can enable promisc(include allmulti mode). If a trusted VF enabled promisc, and being untrusted, host will disable promisc mode for this VF. For VF will update its promisc mode from set_rx_mode now, so it's unnecessary to set broadcst promisc mode when initialization or reset. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for spoof check settingJian Shen6-9/+140
This patch adds support for spoof check configuration for VFs. When it is enabled, "spoof checking" is done for both mac address and VLAN. For each VF, the HW ensures that the source MAC address (or VLAN) of every outgoing packet exists in the MAC-list (or VLAN-list) configured for RX filtering for that VF. If not, the packet is dropped. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08net: hns3: add support for setting VF link status on the hostYufeng Mo5-1/+111
This patch adds support to configure VF link properties. The options are auto, enable, and disable. Even if the PF is down, the communication between VFs will be normal if the VFs are set to enable. The commands are as follows: 'ip link set <pf> vf <vf_id> state <auto|enable|disable>' change the VF status 'ip link show' show the setting status Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-08nfp: bpf: make array exp_mask static, makes object smallerColin Ian King1-1/+1
Don't populate the array exp_mask on the stack but instead make it static. Makes the object code smaller by 224 bytes. Before: text data bss dec hex filename 77832 2290 0 80122 138fa ethernet/netronome/nfp/bpf/jit.o After: text data bss dec hex filename 77544 2354 0 79898 1381a ethernet/netronome/nfp/bpf/jit.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-07dpaa2-eth: Avoid unbounded while loopsIoana Radulescu2-6/+34
Throughout the driver there are several places where we wait indefinitely for DPIO portal commands to be executed, while the portal returns a busy response code. Even though in theory we are guaranteed the portals become available eventually, in practice the QBMan hardware module may become unresponsive in various corner cases. Make sure we can never get stuck in an infinite while loop by adding a retry counter for all portal commands. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07dpaa2-eth: Fix minor bug in ethtool stats reportingIoana Radulescu1-1/+1
Don't print error message for a successful return value. Fixes: d84c3a4ded96 ("dpaa2-eth: Add new DPNI statistics counters") Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07dpaa2-eth: Cleanup dead codeIoana Radulescu1-7/+0
Remove one function call whose result was not used anywhere. Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: hns3: make array tick_array static, makes object smallerColin Ian King1-1/+1
Don't populate the array tick_array on the stack but instead make it static. Makes the object code smaller by 29 bytes. Before: text data bss dec hex filename 19191 432 0 19623 4ca7 hisilicon/hns3/hns3pf/hclge_tm.o After: text data bss dec hex filename 19098 496 0 19594 4c8a hisilicon/hns3/hns3pf/hclge_tm.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: hns: make arrays static, makes object smallerColin Ian King1-2/+2
Don't populate the arrays port_map and sl_map on the stack but instead make them static. Makes the object code smaller by 64 bytes. Before: text data bss dec hex filename 49575 6872 64 56511 dcbf hisilicon/hns/hns_dsaf_main.o After: text data bss dec hex filename 49350 7032 64 56446 dc7e hisilicon/hns/hns_dsaf_main.o (gcc version 9.2.1, amd64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: ethtool: support set_channels callbackSameeh Jubran3-3/+35
Set channels callback enables the user to change the count of queues used by the driver using ethtool. We decided to currently support only equal number of rx and tx queues, this might change in the future. Also rename dev_up to dev_was_up in ena_update_queue_count() to make it clearer. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: remove redundant print of number of queuesSameeh Jubran1-2/+2
The number of queues can be derived using ethtool, no need to print it in ena_probe() Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: make ethtool -l show correct max number of queuesSameeh Jubran3-25/+29
- Update ena_ethtool:ena_get_channels() to return adapter->max_io_queues so that ethtool -l returns the correct maximum queue number. - Change the name of ena_calc_io_queue_num() to ena_calc_max_io_queue_num() as it returns the maximum number of io queues and actual number of queues can be smaller if changed by ethtool -L which is implemented in a later commit. - Change variable name from io_queue_num to max_num_io_queues in ena_calc_max_io_queue_num() and ena_probe(). - Make all types of variables that convey the number and sizeof queues to be u32, for consistency with the API between the driver and the device. Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: ethtool: get_channels: use combined onlySameeh Jubran1-8/+2
Since we use the same IRQ and NAPI to service RX and TX then we need to use a combined channel instead of rx and tx channels. Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: multiple queue creation related cleanupsSameeh Jubran1-20/+11
- Rename ena_calc_queue_size() to ena_calc_io_queue_size() for clarity and consistency - Remove redundant number of io queues parameter in functions ena_enable_msix() and ena_enable_msix_and_set_admin_interrupts(), which already get adapter parameter, so use adapter->num_io_queues in the function instead. - Use the local variable ena_dev instead of ctx->ena_dev in ena_calc_io_queue_size - Fix multi row comment alignments Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-07net: ena: change num_queues to num_io_queues for clarity and consistencySameeh Jubran3-44/+44
Most places in the code refer to the IO queues as io_queues and not simply queues. Examples - max_io_queues_per_vf, ENA_MAX_NUM_IO_QUEUES, ena_destroy_all_io_queues() etc.. We are also adding the new max_num_io_queues field to struct ena_adapter in the following commit. The changes included in this commit are: struct ena_adapter->num_queues => struct ena_adapter->num_io_queues Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by: Sameeh Jubran <sameehj@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: stmmac: Implement L3/L4 Filters in GMAC4+Jose Abreu3-0/+128
GMAC4+ cores support Layer 3 and Layer 4 filtering. Add the corresponding callbacks in these cores. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: stmmac: selftests: Add tests for VLAN Perfect FilteringJose Abreu1-37/+77
Add two new tests for VLAN Perfect Filtering. While at it, increase a little bit the tests strings lenght so that we can have more descriptive test names. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06net: stmmac: Fallback to VLAN Perfect filtering if HASH is not availableJose Abreu4-9/+40
If VLAN Hash Filtering is not available we can fallback to perfect filtering instead. Let's implement this in XGMAC and GMAC cores and let the user use this filter. VLAN VID=0 always passes filter so we check if more than 2 VLANs are created and return proper error code if so because perfect filtering only supports 1 VID at a time. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: minimal: Add validation for FW versionVadim Pasternak1-0/+30
Add validation for FW version in order to prevent driver initialization in case FW version is older than expected. FW version validation is necessary, because use of a new field 'num_of_modules' in MGPIR register is not backward compatible. FW 'minor' and 'subminor' versions are expected to be greater than or equal to 2000 and 1886, respectively. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: core: Push minor/subminor fw version check into helperVadim Pasternak3-3/+16
Add new API for FW "minor" and "subminor" version validation for sharing it between "spectrum" and "minimal" drivers. Use it in "spectrum" driver. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: thermal: Provide optimization for QSFP modules number detectionVadim Pasternak1-21/+16
Use new field "num_of_modules" of MGPIR register for "thermal" interface in order to get the number of modules supported by system directly from the system configuration, instead of getting it from port to module mapping info. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: hwmon: Provide optimization for QSFP modules number detectionVadim Pasternak1-35/+29
Use new field "num_of_modules" of MGPIR register for "hwmon" interface in order to get the number of modules supported by system directly from the system configuration, instead of getting it from port to module mapping info. Reading this info through MGPIR register is faster and does not depend on possible dynamic re-configuration of ports. In case of port dynamic re-configuration some modules can logically "disappear" as a result of port split and un-spilt operations, which can cause missing of some modules, in case this info is taken from port to module mapping info. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-06mlxsw: reg: Extend MGPIR register with new field exposing the number of QSFP modulesVadim Pasternak3-3/+12
Extend MGPIR - Management General Peripheral Information Register with new field "num_of_modules" exposing the number of modules supported by specific system. Signed-off-by: Vadim Pasternak <vadimp@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add tracing for device/offload eventsJakub Kicinski1-1/+2
Add tracing of device-related interaction to aid performance analysis, especially around resync: tls:tls_device_offload_set tls:tls_device_rx_resync_send tls:tls_device_rx_resync_nh_schedule tls:tls_device_rx_resync_nh_delay tls:tls_device_tx_resync_req tls:tls_device_tx_resync_send Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller14-59/+66
2019-10-04net: qlogic: Fix memory leak in ql_alloc_large_buffersNavid Emamdoost1-0/+1
In ql_alloc_large_buffers, a new skb is allocated via netdev_alloc_skb. This skb should be released if pci_dma_mapping_error fails. Fixes: 0f8ab89e825f ("qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send()") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04cxgb4:Fix out-of-bounds MSI-X info array accessVishal Kulkarni1-3/+6
When fetching free MSI-X vectors for ULDs, check for the error code before accessing MSI-X info array. Otherwise, an out-of-bounds access is attempted, which results in kernel panic. Fixes: 94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: devlink: allow to change namespaces during reloadJiri Pirko2-1/+6
All devlink instances are created in init_net and stay there for a lifetime. Allow user to be able to move devlink instances into namespaces during devlink reload operation. That ensures proper re-instantiation of driver objects, including netdevices. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Propagate extack down to register_fib_notifier()Jiri Pirko10-21/+34
During the devlink reaload the extack is present, so propagate it all the way down to register_fib_notifier() call in spectrum_router.c. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: Register port netdevices into net of coreJiri Pirko3-0/+3
When creating netdevices for ports, put them under network namespace that the core/parent devlink belongs to. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum: Take devlink net instead of init_netJiri Pirko6-17/+34
Follow-up patch is going to allow to reload devlink instance into different network namespace, so use devlink_net() helper instead of init_net. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: propagate extack down to the notifier block callbackJiri Pirko3-3/+3
Since errors are propagated all the way up to the caller, propagate possible extack of the caller all the way down to the notifier block callback. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04mlxsw: spectrum_router: Don't rely on missing extack to symbolize dumpJiri Pirko1-21/+1
Currently if info->extack is NULL, mlxsw assumes that the event came down from dump. Originally, the dump did not propagate the return value back to the original caller (fib_notifier_register()). However, that is now happening. So benefit from this and push the error up if it happened. Remove rule cases in work handlers that are now dead code. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net: fib_notifier: make FIB notifier per-netnsJiri Pirko3-16/+9
Currently all users of FIB notifier only cares about events in init_net. Later in this patchset, users get interested in other namespaces too. However, for every registered block user is interested only about one namespace. Make the FIB notifier registration per-netns and avoid unnecessary calls of notifier block for other namespaces. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03mlxsw: PCI: Send EMAD traffic on a separate queuePetr Machata2-2/+19
Currently mlxsw distributes sent traffic among all the available send queues. That includes control traffic as well as EMADs, which are used for configuration of the device. However because all the queues have the same traffic class of 3, they all end up being directed to the same traffic class buffer. If the control traffic in the buffer cannot be serviced quickly enough, the EMAD traffic might be shut out, which causes transient failures, typically in FDB maintenance, counter upkeep and other periodic work. To address this issue, dedicate SDQ 0 to EMAD traffic, with TC 0. Distribute the control traffic among the remaining queues, which are left with their current TC 3. Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03net: stmmac: Support enhanced addressing mode for DWMAC 4.10Thierry Reding4-2/+34
The address width of the controller can be read from hardware feature registers much like on XGMAC. Add support for parsing the ADDR64 field so that the DMA mask can be set accordingly. This avoids getting swiotlb involved for DMA on Tegra186 and later. Also make sure that the upper 32 bits of the DMA address are written to the DMA descriptors when enhanced addressing mode is used. Similarily, for each channel, the upper 32 bits of the DMA descriptor ring's base address also need to be programmed to make sure the correct memory can be fetched when the DMA descriptor ring is located beyond the 32-bit boundary. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-03net: stmmac: Only enable enhanced addressing mode when neededThierry Reding2-1/+11
Enhanced addressing mode is only required when more than 32 bits need to be addressed. Add a DMA configuration parameter to enable this mode only when needed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.