aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2012-06-27net: sh_eth: add support for set_ringparam/get_ringparamYoshihiro Shimoda2-33/+112
This patch supports the ethtool's set_ringparam() and get_ringparam(). Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: fix up the buffer pointersYoshihiro Shimoda1-7/+24
After freeing the buffer, the driver should change the value of the pointer to NULL. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary members/definitionsYoshihiro Shimoda2-75/+1
This patch removes unnecessary members in sh_th_private. This patch also removes unnecessary definitions in sh_eth.h Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27net: sh_eth: remove unnecessary functionYoshihiro Shimoda2-23/+0
The sh_eth_timer() called mod_timer() for itself. So, this patch removes the function. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x: Change bnx2x_tests_str_arr to static charMerav Sicron1-1/+1
This patch changes the definition of bnx2x_tests_str_arr from char to static char. This correction will also eliminate the sparse warning created in commit cf2c1df62e065bfc15e38daf2d3479a56b320f29. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities advertisementBarak Witkowski6-125/+226
1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-26ixgbe: Do not pad FCoE frames as this can cause issues with FCoE DDPAlexander Duyck3-7/+13
FCoE target mode was experiencing issues due to the fact that we were sending up data frames that were padded to 60 bytes after the DDP logic had already stripped the frame down to 52 or 56 depending on the use of VLANs. This was resulting in the FCoE DDP logic having issues since it thought the frame still had data in it due to the padding. To resolve this, adding code so that we do not pad FCoE frames prior to handling them to the stack. CC: <stable@vger.kernel.org> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/sh-eth: Check return value of sh_eth_reset when chip reset failNobuhiro Iwamatsu1-32/+56
The sh_eth_reset function resets chip, but this performs nothing when failed. This changes sh_eth_reset return an error, when this failed in reset. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/sh-eth: Add support selecting MII function for SH7734 and R8A7740Nobuhiro Iwamatsu2-43/+66
Ethernet IP of SH7734 and R8A7740 has selecting MII register. The user needs to change a value according to MII to be used. This adds the function to change the value of this register. Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4_en: Release QP range in free_resourcesYevgeny Petrilin2-4/+9
Add a missing resource release in ring cleanup. Not doing this leaves a range of QPs that are being reserved, and no one can use them. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4: Use single completion vector after NOP failureYevgeny Petrilin1-0/+2
Fix a crash at the error flow of NOP command which caused the driver to try and use a completion vector which wasn't allocated. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25net/mlx4_en: Set correct port parameters during device initializationYevgeny Petrilin1-2/+4
Set valid port parameters: MTU and flow control configuration when configuring the port during HW device initialization, prior to the net device open() being called. Using invalid parameters (such as all zeros) could lead to bad firmware behavior. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25be2net: Regression bug wherein VFs creation broken for multiple cards.Somnath Kotur1-1/+2
Fix be_find_vfs() to check for matching bus number as well along with devfn Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25be2net: Explicitly clear the reserved field in the Tx DescriptorSomnath Kotur1-0/+1
Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller10-45/+65
Conflicts: drivers/net/usb/qmi_wwan.c net/batman-adv/translation-table.c net/ipv6/route.c qmi_wwan.c resolution provided by Bjørn Mork. batman-adv conflict is dealing merely with the changes of global function names to have a proper subsystem prefix. ipv6's route.c conflict is merely two side-by-side additions of network namespace methods. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-25netxen: Error return off by one for XG port.Santosh Nayak2-4/+4
There are NETXEN_NIU_MAX_XG_PORTS ports. Port indexing starts from zero. Hence we should also return error for 'port == NETXEN_NIU_MAX_XG_PORTS'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
2012-06-25netxen: Error return off by one in 'netxen_nic_set_pauseparam()'.Santosh Nayak1-2/+2
There are 'NETXEN_NIU_MAX_GBE_PORTS' GBE ports. Port indexing starts from zero. Hence we should also return error for "port == NETXEN_NIU_MAX_GBE_PORTS" Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
2012-06-22net: sh_eth: fix the condition to fix the cur_tx/dirty_rxYoshihiro Shimoda1-5/+7
The following commit couldn't work if the RMCR is not set to 1. "net: sh_eth: fix the rxdesc pointer when rx descriptor empty happens" commit id 79fba9f51755c704c0a7d7b7f0df10874dc0a744 If RMCR is not set, the controller will clear the EDRRR after it received a frame. In this case, the driver doesn't need to fix the value of cur_rx/dirty_rx. The driver only needs it when the controll detects receive descriptors are empty. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22r8169: RxConfig hack for the 8168evl.françois romieu1-0/+1
The 8168evl (RTL_GIGA_MAC_VER_34) based Gigabyte GA-990FXA motherboards are very prone to NETDEV watchdog problems without this change. See https://bugzilla.kernel.org/show_bug.cgi?id=42899 for instance. I don't know why it *works*. It's depressingly effective though. For the record: - the problem may go along IOMMU (AMD-Vi) errors but it really looks like a red herring. - the patch sets the RX_MULTI_EN bit. If the 8168c doc is any guide, the chipset now fetches several Rx descriptors at a time. - long ago the driver ignored the RX_MULTI_EN bit. e542a2269f232d61270ceddd42b73a4348dee2bb changed the RxConfig settings. Whatever the problem it's now labeled a regression. - Realtek's own driver can identify two different 8168evl devices (CFG_METHOD_16 and CFG_METHOD_17) where the r8169 driver only sees one. It sucks. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: link module eepromYuval Mintz3-4/+67
Add the ethtool functionality of accessing optic modules' information and eeprom to the bnx2x driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: 1G sfp+ module handlingYuval Mintz3-84/+151
Automatically lower requested link speed to 1G in case 1G SFP+ module is detected. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: revised link register accessYuval Mintz3-144/+100
This is a semantic change, cleaning some sections in which the bnx2x handles the phy's registers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: treat 0 speed as link down (copper)Yuval Mintz1-10/+12
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: link cleanupYuval Mintz1-173/+167
This patch does several things: 1. Add static to function when possible. 2. Correct comments. 3. Change msleep(small) --> usleep_range(small, small*2). Also correct existing calls to usleep_range. 4. Remove dead code. 5. Change 'if(rc != 0)' --> if(rc) Most of these changes are purely semantic. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22bnx2x: sfp+ Tx fault detection addedYuval Mintz3-16/+99
Adds the ability to identify sfp+ modules' Tx fault, and when such occur shut down the link. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-22smsc911x.c: encapsulate enable irq callsMatthias Brugger1-7/+10
We encapsulate enbale irq functionality in a function call. As on probe the interrupts will be disabled twice, we delete one. Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21ixgbe: simplify padding and length checksStephen Hemminger1-7/+2
The check for length <= 0 is bogus because length is unsigned, and network stack never sends zero length packets (unless it is totally broken). The check for really small packets can be optimized (using unlikely) and calling skb_pad directly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20ixgbe: clean up ixgbe_get_settings ethtool functionJacob Keller1-85/+62
This patch cleans up the method used for determining the link speed of devices. The old method re-wrote some logic already existing in a mac.ops function which should be used instead. The result is much simpler to understand and removes a strange double-check of logic, as well as reducing code redundancy. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20ixgbe: add support for 1G SX modulesJacob Keller3-5/+24
This patch adds support for 1G Fiber PHY modules (SFP+ modules). This support comes along side support for 1G Copper PHY modules, but uses a different PHY type (ixgbe_sfp_type_1g_sx_core). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Version bumpCarolyn Wyborny1-3/+3
This patch updates the igb version to 4.0.1. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Update firmware info outputCarolyn Wyborny3-10/+89
Our NVM image creation tools have evolved over the years and there are multiple versions contained in them, depending on the tool used to create them. This patch outputs the NVM versions available in ethtool -i output. rc2: (not sure why others show in log but not in the message) Added additional call to igb_set_fw_version per Community feedback. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Streamline RSS queue and queue pairing assignment logic.Matthew Vick2-33/+55
Rather than spread out the complexity of the RSS queue and queue pairing assignment logic, place it all in one location for simplicity and readability. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Support the get_ts_info ethtool method.Carolyn Wyborny1-0/+35
Based on original patch from Richard Cochran <richardcochran@gmail.com> Original patch caused build errors without CONFIG_IGB_1588_CLOCK and CONFIG_PPS enabled, since the added code was not properly wrapped. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Add switch case for supported hardware to igb_ptp_remove.Carolyn Wyborny1-1/+11
PTP initialization is only done on supported parts, so remove needs same checks or it will cause crashes on systems with igb devices that don't support PTP. This patch adds those checks to the exit function. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: A fix to VF TX rate limitLior Levy2-0/+6
There is a need to configure MMW_SIZE in register RTTBCNRM with a correct value. For 82576 device, the value should be 0x14. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20e1000: Combining Bitwise OR in one expression.Tushar Dave1-6/+6
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20ixgbe: Fix memory leak in ixgbe when receiving traffic on DDP enabled ringsAlexander Duyck1-1/+1
This patch fixes a memory leak that was introduced in the 3.4 kernel. The leak occurred when FCoE was enabled and traffic was passed over the FCoE rings reserved for FCoE. The memory leak was due to us not populating the compound page information on the order 1 pages needed for FCoE. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20Kconfig: Fix Kconfig for Intel ixgbe and igb PTP support.Carolyn Wyborny1-3/+7
Fix Kconfig file to make sure that PTP and IGB/IXGBE are both either in-kernel or modules, not mixed. Having the build status mixed causes compile errors. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Fix incorrect RAR address entries for i210/i211 device.Carolyn Wyborny1-2/+0
i210/i211 device has only 16 RAR address filters like 82575, instead of 32 like i350. This patch removes the entries for i210/i211 in the get_invariants function which was setting them for 32. This ensures that they will get the default value which is the correct one. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-19bnx2x: Change date and version to 1.72.51-0Merav Sicron1-2/+2
This change updates the date and version of the bnx2x driver. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Support DCBX for all functionsBarak Witkowski7-12/+31
In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for ethtool -LMerav Sicron5-12/+100
Add support for ethtool -L/-l for setting and getting the number of RSS queues. The 'combined' field is used as we don't support separate IRQ for Rx and Tx. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Allow up to 63 RSS queuesMerav Sicron1-10/+3
This patch removed the limitation in the code for 16 RSS queues. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Split the FP structureBarak Witkowski6-87/+155
This patch moves some fields out of the FP structure to different structures, in order to minimize size of contigiuous memory allocated. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Move the CNIC L2 CIDs to be right after the RSS CIDsMerav Sicron4-30/+52
Currently the CNIC-related L2 CIDs (for sending control FCoE / iSCSI packets) were at fixed position, according to the maximal number of RSS queues multiplied by the number of traffic-classes. This change makes the CIDs dynamic, as they are defined to be right after the highest RSS CID. This decreases the memory allocated for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Make the transmission queues adjacentMerav Sicron6-94/+139
In the current scheme the transmission queues of traffic-class 0 were 0-15, the transmission queues of traffic-class 1 were 16-31 and so on. If the number of RSS queues was smaller than 16, there were gaps in transmission queues numbering, as well as in CIDs numbering. This is both a waste (especially when 16 is increased to 64), and may causes problems with flushing queues when reducing the number of RSS queues (using ethtool -L). The new scheme eliminates the gaps. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Allow more than 64 L2 CIDsMerav Sicron2-20/+57
With increased number of RSS queues, each multiplied by the number of traffic- classes, we may have up to 64*3=192 CIDs. The current driver scheme with regard to context allocation supports only 64 CIDs. The new scheme enables scatter- gatehr list of pages for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for 4-tupple UDP RSSMerav Sicron5-15/+159
This change enables to control via ethtool whether to do UDP RSS on 2-tupple (IP source / destination only) or on 4-tupple (include UDP source / destination port). It also enables to read back the RSS configuration. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Return only online tests for MFMerav Sicron2-29/+62
1. In multi-function device, show only the online tests in self-test results as only these test are performed (offline tests cannot be performed as they may corrupt the traffic of other functions on the same physical port). Note that multi-function mode cannot change while the driver is up. 2. Check result code in NIC load and act accordingly. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for external LBMerav Sicron4-9/+81
This change enables to do self-test with external loopback via ethtool. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.