aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet (follow)
AgeCommit message (Collapse)AuthorFilesLines
2016-06-19net: ethernet: nb8800: use phydev from struct net_devicePhilippe Reynes2-29/+29
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ethernet: et131x: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-14/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ethernet: et131x: use phydev from struct net_devicePhilippe Reynes1-30/+18
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net:liquidio: remove unused including <linux/version.h>Wei Yongjun1-1/+0
Remove including <linux/version.h> that don't need it. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: ethernet: ti: cpsw: remove rx_descs propertyIvan Khoronzhuk4-11/+10
There is no reason in rx_descs property because davinici_cpdma driver splits pool of descriptors equally between tx and rx channels. That is, if number of descriptors 256, 128 of them are for rx channels. While receiving, the descriptor is freed to the pool and then allocated with new skb. And if in DT the "rx_descs" is set to 64, then 128 - 64 = 64 descriptors are always in the pool and cannot be used, for tx, for instance. It's not correct resource usage, better to set it to half of pool, then the rx pool can be used in full. It will not have any impact on performance, as anyway, the "redundant" descriptors were unused. Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17net: lantiq_etop: remove unused variableSudip Mukherjee1-1/+0
The variable i was declared but was never used and we were getting a build warning for that. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17qlcnic: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck4-32/+14
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17qede: Move all UDP port notifiers to single functionAlexander Duyck2-85/+50
This patch goes through and combines the notifiers for VXLAN and GENEVE into a single function for each action. So there is now one combined function for getting ports, one for adding the ports, and one for deleting the ports. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17nfp: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck1-8/+14
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17mlx5_en: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck1-7/+13
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17mlx4_en: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck3-30/+20
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. In addition I updated the socket address family check so that instead of excluding IPv6 we instead abort of type is not IPv4. This makes much more sense as we should only be supporting IPv4 outer addresses on this hardware. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17ixgbe: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck2-42/+26
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type is VXLAN we can maintain the same functionality. In addition I updated the socket address family check so that instead of excluding IPv6 we instead abort of type is not IPv4. This makes much more sense as we should only be supporting IPv4 outer addresses on this hardware. The last change is that I pulled the rtnl_lock/unlock into the conditional statement for IXGBE_FLAG2_VXLAN_REREG_NEEDED. The motivation behind this is to avoid unneeded bouncing of the mutex which will just slow down the handling of this call anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17i40e: Move all UDP port notifiers to single functionAlexander Duyck2-156/+51
This patch goes through and combines the notifiers for VXLAN and GENEVE into a single function for each action. So there is now one combined function for getting ports, one for adding the ports, and one for deleting the ports. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17fm10k: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck2-27/+20
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type if VXLAN we can maintain the same functionality. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17benet: Replace ndo_add/del_vxlan_port with ndo_add/del_udp_enc_portAlexander Duyck2-25/+15
This change replaces the network device operations for adding or removing a VXLAN port with operations that are more generically defined to be used for any UDP offload port but provide a type. As such by just adding a line to verify that the offload type if VXLAN we can maintain the same functionality. I have also gone though and removed the BE2NET_VXLAN config option since it no longer relies on the VXLAN code anyway. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17bnxt: Move GENEVE support from hard-coded port to using port notifierAlexander Duyck2-6/+33
The port number for GENEVE is hard coded into the bnxt driver. This is the kind of thing we want to avoid going forward. For now I will integrate this back into the port notifier so that we can change the GENEVE port number if we need to in the future. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17bnxt: Update drivers to support unified UDP encapsulation offload functionsAlexander Duyck2-29/+40
This patch ends up doing several things. First it updates the driver to make use of the new unified UDP tunnel offload notifier functions. In addition I updated the code so that we can work around the bits that were checking for if VXLAN was enabled since we are now using a notifier based setup. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Acked-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-17bnx2x: Move all UDP port notifiers to single functionAlexander Duyck2-81/+33
This patch goes through and combines the notifiers for VXLAN and GENEVE into a single function for each action. So there is now one combined function for getting ports, one for adding the ports, and one for deleting the ports. I also went through and dropped the BNX2X VXLAN and GENEVE specific build flags. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: gianfar: fix old-style declarationArnd Bergmann1-1/+1
Modern C standards expect the '__inline__' keyword to come before the return type in a declaration, and we get a warning for this with "make W=1": drivers/net/ethernet/freescale/gianfar.c:2278:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: tlan: don't set unused function argumentArnd Bergmann1-1/+0
We get a warning for tlan_handle_tx_eoc when building with "make W=1" drivers/net/ethernet/ti/tlan.c: In function 'tlan_handle_tx_eoc': drivers/net/ethernet/ti/tlan.c:1647:59: error: parameter 'host_int' set but not used [-Werror=unused-but-set-parameter] static u32 tlan_handle_tx_eoc(struct net_device *dev, u16 host_int) This is harmless, but removing the unused assignment lets us avoid the warning with no downside. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: qlcnic: don't set unused function argumentArnd Bergmann1-1/+0
We get a warning for qlcnic_83xx_get_mac_address when building with "make W=1": drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c: In function 'qlcnic_83xx_get_mac_address': drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c:2156:8: error: parameter 'function' set but not used [-Werror=unused-but-set-parameter] Clearly this is harmless, but there is also no point for setting the variable, so we can simply remove the assignment. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: ethernet: ax88796: use phy_ethtool_{get|set}_link_ksettingsPhilippe Reynes1-22/+2
There are two generics functions phy_ethtool_{get|set}_link_ksettings, so we can use them instead of defining the same code in the driver. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: ethernet: ax88796: use phydev from struct net_devicePhilippe Reynes1-13/+7
The private structure contain a pointer to phydev, but the structure net_device already contain such pointer. So we can remove the pointer phydev in the private structure, and update the driver to use the one contained in struct net_device. Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: stmmac: dwmac-rk: keep the PHY up for WoLVincent Palatin1-5/+43
When suspending the machine, do not shutdown the external PHY by cutting its regulator in the mac platform driver suspend code if Wake-on-Lan is enabled, else it cannot wake us up. In order to do this, split the suspend/resume callbacks from the init/exit callbacks, so we can condition the power-down on the lack of need to wake-up from the LAN but do it unconditionally when unloading the module. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-16net: stmmac: allow to split suspend/resume from init/exit callbacksVincent Palatin1-2/+6
Let the stmmac platform drivers provide dedicated suspend and resume callbacks rather than always re-using the init and exits callbacks. If the driver does not provide the suspend or resume callback, we fall back to the old behavior trying to use exit or init. This allows a specific platform to perform only a partial power-down on suspend if Wake-on-Lan is enabled but always perform the full shutdown sequence if the module is unloaded. Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Fix VLAN filtering feature if vPort has VLAN_RESTRICT flagAndrew Rybchenko3-5/+74
If vPort has VLAN_RESTRICT flag, VLAN tagged traffic will not be delivered without corresponding Rx filters which may be proxied to and moderated by hypervisor. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Update MCDI protocol definitionsEdward Cree1-48/+1279
Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Disable VLAN filtering by default if not strictly requiredAndrew Rybchenko1-1/+9
If should be done after net_dev->hw_features initialization, to keep the feature there to be able to enable it later using ethtool. VLAN filtering is enforced and fixed if vPort requires usage of VLAN filters to receive tagged traffic. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: VLAN filters must only be created if the firmware supports this.Martin Habets2-0/+25
If it is not supported we simply disable the feature. For the feature to work we need firmware filter support for OUTER_VID + LOC_MAC and for OUTER_VID + LOC_MAC_IG. The low-latency firmware can match on OUTER_VID + LOC_MAC but not on OUTER_VID + LOC_MAC_IG. For the capture packet firmware it is the other way around. Only the full-feature variant can match on both combinations. Incorporates a fix by Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru> in the net_dev->[hw_]features handling. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Fix dup unknown multicast/unicast filters after datapath resetAndrew Rybchenko1-11/+69
Filter match flags are not unique criteria to be mapped to priority because of both unknown unicast and unknown multicast are mapped to LOC_MAC_IG. So, local MAC is required to map filter to priority. MCDI filter flags is unique criteria to find filter priority. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Refactor checks for invalid filter IDEdward Cree1-26/+13
Nearly every time we call efx_ef10_filter_remove_unsafe, we first check for EFX_EF10_FILTER_ID_INVALID, in which case we do nothing. So move that check into the function, simplifying all the call sites. Also, change the return type to void, since none of the callers check it. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Take mac_lock before calling efx_ef10_filter_table_probeMartin Habets3-2/+11
When trying to enslave an SFC interface to a bond the following BUG_ON was hit: kernel BUG [in ef10.c]! CPU: 0 PID: 4383 Comm: ifenslave Tainted: G ... Call Trace: efx_ef10_filter_add_vlan+0x121/0x180 [sfc] efx_ef10_filter_table_probe+0x2a2/0x4f0 [sfc] efx_ef10_set_mac_address+0x370/0x6d0 [sfc] efx_set_mac_address+0x7d/0x120 [sfc] dev_set_mac_address+0x43/0xa0 bond_enslave+0x337/0xea0 [bonding] This comes from function efx_ef10_filter_vlan_sync_rx_mode. To solve the bug we ensure the mac_lock is taken before calling efx_ef10_filter_add_vlan. But to avoid a priority inversion mac_lock must be taken before filter_sem. To satisfy these requirements we end up taking mac_lock in efx_ef10_vport_set_mac_address, efx_ef10_set_mac_address, efx_ef10_sriov_set_vf_vlan and efx_probe_filters. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Implement ndo_vlan_rx_{add, kill}_vid() callbacksAndrew Rybchenko3-2/+124
Supports HW VLAN filtering, en/disabled using ethtool. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Implement list of VLANs added over interfaceAndrew Rybchenko2-35/+295
Right now it contains dummy VLAN entry with unspecified VID only. The entry is used for the case when HW VLAN filtering is not used. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Make EF10 filter management helper functions VLAN-awareAndrew Rybchenko1-29/+41
It is a step to support VLAN filtering in HW. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Store unicast and multicast promisc flag with address cacheAndrew Rybchenko1-15/+15
These flags are built when address cache is updated. The information will be required when VLAN filtering is added and address cache is used without re-sync. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Move filter IDs to per-VLAN data structureAndrew Rybchenko1-37/+51
It is a step to support VLAN filtering in HW. Until then, there is only one struct efx_ef10_filter_vlan per struct efx_ef10_filter_table, with no VLAN information yet. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Forget filter ID when the filter is marked oldAndrew Rybchenko1-20/+33
It is required to remove setting of filter IDs to invalid from multicast and unicast addresses caching functions. Add initialization to invalid when filter table is created. Add paranoid checks to track consistency. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Assert filter_sem write locked when requiredEdward Cree2-1/+24
Based on a patch by Andrew Rybchenko <Andrew.Rybchenko@oktetlabs.ru> Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Add efx_nic member with fixed netdev featuresAndrew Rybchenko2-4/+17
It allows to change set of fixed features on datapath reset. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Move last mc_promisc flag to EF10 filter table stateAndrew Rybchenko2-4/+5
It is used for EF10 only and logically belongs to EF10 filter table state. It is OK that it is reset to false on filter table recreation since all filters are removed on destruction. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15sfc: Define macro with EF10 offload featureAndrew Rybchenko1-4/+8
It is useful to simplify features addition. Signed-off-by: Edward Cree <ecree@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: Introduce new octeon2/3 headerRaghu Vatsavayi7-97/+334
Added support for new instruction header for octeon2/octeon3(ih) and corresponding changes. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: Replace ifidx for FW commandsRaghu Vatsavayi12-174/+187
This patch decoupled the firmware side ifidx and host side interface number. It also has some minor name change for linkinfo sturct field. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: New driver FW command structureRaghu Vatsavayi3-130/+19
This patch is for new driver/firmware control command structure (octnic_packet_params and octnic_cmd_setup ) and resultant code changes. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: Consider PTP for packet size calculationsRaghu Vatsavayi2-15/+25
This patch is to refactor packet size calculations to support PTP enabled for 66xx and 68xx cards and also other cards that do not support PTP. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: RX desc alloc changesRaghu Vatsavayi4-83/+316
This patch is to add page based buffers for receive side descriptors of the driver and separate free routines for rx and tx buffers. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio:RX queue alloc changesRaghu Vatsavayi3-33/+52
This patch is to allocate rx queue's memory based on numa node and also use page based buffers for rx traffic improvements. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio:Scatter gather list per IQRaghu Vatsavayi2-73/+149
This patch is to allocate and manage scatter gather lists per input queue(iq's) and remove queue's interdependence. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-15liquidio: Host queue mapping changesRaghu Vatsavayi6-65/+142
This patch is to allocate the input queues based on Numa node in tx path and queue mapping changes based on the mapping info provided by firmware. Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com> Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com> Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com> Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.